This document proposes using intrusion detection systems and k-means clustering to detect and localize spoofing attacks in wireless sensor networks used in vehicular networks (VANETs). VANETs have characteristics like highly dynamic topology and frequent link changes that make performance monitoring difficult. The proposed approach uses cluster heads acting as IDS to monitor packet transmissions within clusters and detect misbehaving nodes. When an attacker is detected, an alarm is passed to the source node to eliminate the attacker. Simulation results show the method can efficiently and robustly detect and locate spoofing attackers in VANET wireless sensor networks.
A Modular Approach To Intrusion Detection in Homogenous Wireless NetworkIOSR Journals
This document discusses a modular approach to intrusion detection in homogeneous wireless networks. It begins by introducing wireless networks and the need for intrusion detection systems (IDS) due to security vulnerabilities. It then discusses different types of IDS, including signature-based detection that identifies known attacks, and anomaly-based detection that identifies deviations from normal behavior but can result in high false positives. The document proposes a modular approach combining advantages of signature-based and anomaly-based detection for high detection rates and low false positives. Requirements for IDS in wireless networks are also outlined.
Wireless Networks Security in Jordan: A Field StudyIJNSA Journal
- The document summarizes a study that evaluated the security of wireless networks in Jordan through a process called "wardriving" where the researchers drove around with wireless network detection tools.
- The results found that the majority (79.52%) of wireless networks tested were unsecured and vulnerable. Most networks used either low levels of encryption (68.67%) or no encryption at all (11.45%).
- Nearly all networks broadcast the default SSID (92.17%), leaving them exposed to potential hackers since changing the SSID is a basic security precaution.
Analysis of denial of service (dos) attacks in wireless sensor networkseSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Security Issues & Challenging Attributes in Mobile Ad-Hoc Networks (MANET)IRJET Journal
This document discusses security issues and challenges in mobile ad-hoc networks (MANETs). It begins with an introduction to MANETs and their key features. It then discusses different types of security attacks on MANETs, including active attacks like black hole attacks, wormhole attacks, and flooding attacks. It also covers passive attacks like eavesdropping. It analyzes security threats at different layers of the OSI model. Some of the major security challenges in MANETs are the lack of centralized monitoring, dynamic network topology, and limited resources. The document concludes that security is a major concern for applications using MANETs and more work is needed to develop efficient security algorithms for these networks.
International Journal of Computational Engineering Research(IJCER)ijceronline
International Journal of Computational Engineering Research(IJCER) is an intentional online Journal in English monthly publishing journal. This Journal publish original research work that contributes significantly to further the scientific knowledge in engineering and Technology.
Determining an Optimal Number of Access Points Using GPS data to Secure a Wir...CSCJournals
Determination of the position enables location awareness for mobile computers in any place and persistent wireless computing. In addition utilizing location information, location aware computers can render location based services possible for mobile users. In order to design and implement a technique to identify the source network interface card, a feasibility study should be done to keep the project within the budget; also tracking of new technologies will enhance the methodology of choosing these techniques. Wireless Local Area Network (WLAN) is vulnerable to malicious attacks due to their shared medium in unlicensed frequency spectrum, thus requiring security features for a variety of applications. This paper will discuss a technique that helps in determining the best location for access points using GPS system, in order to choose the optimal number of them; which guide to localize and identify attacks with optimal IDS method and cheapest price. The other thing is to locate the intruder within the monitored area by using a hybrid technique, which came from exist techniques, by focusing on the advantages of these techniques and come with a new one to give more accurate results with less price by using available resources
Secured Intrusion Protection System through EAACK in MANETSijtsrd
Achieving reliable routing has always been a major issue in the design of communication networks, due to the absence of fixed infrastructure among which mobile ad hoc networks MANETs that can take control of the most adversarial networking environment, and the dynamic network topology the nature of open transmission media. In the MANETs these characteristics also more challenging to make the design of routing protocols. The network topology varies so to determining feasible routing paths for distributing messages in a decentralized is a difficult job. Factors such as the extensive distribution of nodes and open medium, variable wireless link quality topological changes, and propagation path loss become pertinent issues and make MANET unprotected to instructions. Thus, it becomes central to develop a systematic intrusion detection scheme to secure Mobile Ad Hoc networks from intruders. In this project, we put forward and applied an efficient IDS mechanism based on Enhanced Adaptive Acknowledgment EAACK especially made for MANETs which performs better than the earlier techniques such as AACK, TWOACK and Watchdog. Mr. Ravishankar Kandasamy | M. Ajith Kumar | M. Ajith Kumar | G. Arun Kumar "Secured Intrusion Protection System through EAACK in MANETS" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-3 , April 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30457.pdf Paper Url :https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/30457/secured-intrusion-protection-system-through-eaack-in-manets/mr-ravishankar-kandasamy
HIERARCHICAL DESIGN BASED INTRUSION DETECTION SYSTEM FOR WIRELESS AD HOC SENS...IJNSA Journal
In recent years, wireless ad hoc sensor network becomes popular both in civil and military jobs. However, security is one of the significant challenges for sensor network because of their deployment in open and unprotected environment. As cryptographic mechanism is not enough to protect sensor network from external attacks, intrusion detection system needs to be introduced. Though intrusion prevention mechanism is one of the major and efficient methods against attacks, but there might be some attacks for which prevention method is not known. Besides preventing the system from some known attacks, intrusion detection system gather necessary information related to attack technique and help in the development of intrusion prevention system. In addition to reviewing the present attacks available in wireless sensor network this paper examines the current efforts to intrusion detection
system against wireless sensor network. In this paper we propose a hierarchical architectural design based intrusion detection system that fits the current demands and restrictions of wireless ad hoc sensor network. In this proposed intrusion detection system architecture we followed clustering mechanism to build a four level hierarchical network which enhances network scalability to large geographical area and use both anomaly and misuse detection techniques for intrusion detection. We introduce policy based detection mechanism as well as intrusion response together with GSM cell concept for intrusion detection architecture.
A Secure Intrusion Detection System against DDOS Attack in Wireless Ad-Hoc Ne...IJERA Editor
MANET (Wireless Mobile Ad-hoc Network) is a technology which are used in society in daily life an
activities such as in traffic surveillance, in building construction or it’s application is used in battlefield also. In
MANET there is no control of any node here is no centralized controller that’s why each node has its own
routing capability. And each node act as device and its change its connection to other devices.
The main problem of today’s MANET is a security, because there is no any centralized controller. Our main aim
is that we protect them from DDOS attack in terms of flooding through messages, packet drop, end to end delay
and energy dropping etc. For that we are applying many techniques for saving energy of nodes and identifying
malicious node and types of DDOS attack and in this paper we are discussing this technique.
Analysis of wireless sensor networks security, attacks and challengeseSAT Publishing House
This document summarizes the analysis of wireless sensor networks, including security issues, attacks, and challenges. It discusses the characteristics of wireless sensor networks and their architecture. It outlines various security goals for wireless sensor networks, including confidentiality, integrity, authentication, and availability. It then describes different types of attacks against wireless sensor networks at the physical, link, network, and transport layers. These include jamming, tampering, exhaustion, collision, and flooding attacks. Finally, it discusses key challenges for wireless sensor networks, such as limited resources, heterogeneous platforms, dynamic network topologies, and handling mixed traffic from different applications.
This document summarizes the analysis of wireless sensor networks, including security issues, attacks, and challenges. It discusses the characteristics of wireless sensor networks and their architecture. It outlines various security goals for wireless sensor networks, including confidentiality, integrity, authentication, and availability. It then describes different types of attacks against wireless sensor networks at the physical, link, network, and transport layers. These include jamming, tampering, exhaustion, collision, and flooding attacks. Finally, it discusses key challenges for wireless sensor networks, such as limited resources, heterogeneous platforms, dynamic network topologies, and handling mixed traffic from different applications.
S ECURITY C ONSIDERATIONS IN A M ARINE C OMMUNICATION N ETWORK FOR F ISH...IJCI JOURNAL
This document discusses security considerations for a proposed marine communication network for fishermen. It outlines several potential security vulnerabilities at different layers of the network architecture, including physical, data link, network, transport and application layers. Specific issues for the marine environment are also discussed, such as signals crossing maritime borders, boats crossing borders, and spoofing of nodes like access points, customer premise equipment, smartphones and base stations. The document proposes that solutions are needed to address these security vulnerabilities and situational risks.
An Integrated Multi-level Security Model for Malicious Attacks Resiliency in ...Dr.Irshad Ahmed Sumra
Road accident and traffic congestion are global issues faced by many countries around the world. Road accident led to fatalities and injuries, while traffic congestion led to inconvenient driving and fuel energy wastage. Vehicular Ad hoc Network (VANET), as part of Intelligent Transportation System (ITS), has the ability to provide safety and non-safety applications to users on roads for safe, reliable and comfort driving. In this paper, propose an integrated multi-level Security model and core purpose of this model is to provide the resiliency against malicious attack and aim to reduce incidents of road accidents, as well as to ease traffic congestion.
A technical review and comparative analysis of machine learning techniques fo...IJECEIAES
Machine learning techniques are being widely used to develop an intrusion detection system (IDS) for detecting and classifying cyber attacks at the network-level and the host-level in a timely and automatic manner. However, Traditional Intrusion Detection Systems (IDS), based on traditional machine learning methods, lacks reliability and accuracy. Instead of the traditional machine learning used in previous researches, we think deep learning has the potential to perform better in extracting features of massive data considering the massive cyber traffic in real life. Generally Mobile Ad Hoc Networks have given the low physical security for mobile devices, because of the properties such as node mobility, lack of centralized management and limited bandwidth. To tackle these security issues, traditional cryptography schemes can-not completely safeguard MANETs in terms of novel threats and vulnerabilities, thus by applying Deep learning methods techniques in IDS are capable of adapting the dynamic environments of MANETs and enables the system to make decisions on intrusion while continuing to learn about their mobile environment. An IDS in MANET is a sensoring mechanism that monitors nodes and network activities in order to detect malicious actions and malicious attempt performed by Intruders. Recently, multiple deep learning approaches have been proposed to enhance the performance of intrusion detection system. In this paper, we made a systematic comparison of three models, Inceprtion architecture convolutional neural network (Inception-CNN), Bidirectional long short-term memory (BLSTM) and deep belief network (DBN) on the deep learning-based intrusion detection systems, using the NSL-KDD dataset containing information about intrusion and regular network connections, the goal is to provide basic guidance on the choice of deep learning models in MANET.
This document summarizes a research paper that classifies different types of networks and discusses their associated security issues. It categorizes networks based on size (LAN, MAN, WAN), design (peer-to-peer, client-server, standalone), layering (layered, non-layered), and provides examples such as Ethernet, Wi-Fi, VPNs. It also discusses common security threats for different network types like viruses, denial of service attacks, and evaluates security measures including encryption, firewalls, access control. The paper aims to provide a comprehensive classification of networks and analyze how security needs vary depending on the network and software development stages.
This document proposes a hybrid intrusion detection system (HIDS) for wireless sensor networks. The HIDS combines cluster-based and rule-based intrusion detection techniques. It is designed to address the limited resources of sensor networks while achieving high detection rates and low false positives. The system works by using cluster heads to detect intrusions based on both anomaly detection and comparing activities to known attack behaviors. A simulation evaluated the HIDS and found it performed intrusion detection efficiently while being energy efficient and having a high detection rate.
A NOVEL SECURITY PROTOCOL FOR WIRELESS SENSOR NETWORKS BASED ON ELLIPTIC CURV...IJCNCJournal
With the growing usage of wireless sensors in a variety of applications including Internet of Things, the security aspects of wireless sensor networks have been on priority for the researchers. Due to the constraints of resources in wireless sensor networks, it has been always a challenge to design efficient security protocols for wireless sensor networks. An novel elliptic curve signcryption based security protocol for wireless sensor networks has been presented in this paper, which provides anonymity, confidentiality, mutual authentication, forward security, secure key establishment, and key privacy at the same time providing resistance from replay attack, impersonation attack, insider attack, offline dictionary attack, and stolen-verifier attack. Results have revealed that the proposed elliptic curve signcryption based protocol consumes the least time in comparison to other protocols while providing the highest level of security.
As the Supervisory Control and Data Acquisition (SCADA) system are deployed in infrastructures which are critical to the survival of a nation, they have emerged as a potential terrain for cyber-war, thus attracting the considered attention of ‘nation-states’. The analysis of worms like ‘stuxnet’ ‘flame’ and ‘duqu’ reveals the hand of a ‘nation-state’ in their design and deployment. Hence, the necessity to understand various issues in the defence of SCADA systems arises. The forensics of the SCADA system provide deep insight into the design and deployment of the worm (the malware) once the system is attacked. This is precisely the scope of this essay.
VANET Security against Sybil Attack by Using New SRAN Routing ProtocolEditor IJCATR
A VANET facilitates communicate between vehicles and between vehicles and infrastructure. Vehicular Ad-Hoc Network
is a sub type of Mobile Ad-Hoc Network i.e. MANET. Now days, road traffic activities are one of the most important daily routines
worldwide. VANET provides you most of information that are required for better safety and driving such as an accurate weather
description or early warnings of upcoming dangers. To successfully deploy VANET, security is one of the major challenges such as
protection from selfish vehicles that may block or mess traffic, bogus notifications etc. that may harm and losses lives, that must be
addressed. Sybil attacks have become a serious threat as they can affect the functionality of VANETs for the benefit of the attacker.
The Sybil attack is the case where a single faulty entity, called a malicious node, can create multiple identities known as Sybil nodes or
fake nodes. This project detects and prevents the Sybil attack using “Secure Routing for Ad Hoc Network” (SRAN) routing protocol.
SRAN is based on AODV protocol. In our proposed work, we have developed SRAN protocol to maintain routing information and
route discovery in such manner that will detect as well as prevent Sybil Attack. Each node will have a unique identity and their entry in
route table. SRAN Protocol easily detects such route that is not valid anymore for communication. It deletes all the related entries from
the routing table for those invalid routes
VANET Security against Sybil Attack by Using New SRAN Routing ProtocolEditor IJCATR
A VANET facilitates communicate between vehicles and between vehicles and infrastructure. Vehicular Ad-Hoc Network
is a sub type of Mobile Ad-Hoc Network i.e. MANET. Now days, road traffic activities are one of the most important daily routines
worldwide. VANET provides you most of information that are required for better safety and driving such as an accurate weather
description or early warnings of upcoming dangers. To successfully deploy VANET, security is one of the major challenges such as
protection from selfish vehicles that may block or mess traffic, bogus notifications etc. that may harm and losses lives, that must be
addressed. Sybil attacks have become a serious threat as they can affect the functionality of VANETs for the benefit of the attacker.
The Sybil attack is the case where a single faulty entity, called a malicious node, can create multiple identities known as Sybil nodes or
fake nodes. This project detects and prevents the Sybil attack using “Secure Routing for Ad Hoc Network” (SRAN) routing protocol.
SRAN is based on AODV protocol. In our proposed work, we have developed SRAN protocol to maintain routing information and
route discovery in such manner that will detect as well as prevent Sybil Attack. Each node will have a unique identity and their entry in
route table. SRAN Protocol easily detects such route that is not valid anymore for communication. It deletes all the related entries from
the routing table for those invalid routes.
In our research work we are improving the performance of mobile ad hoc networks under jamming attack by using an integrated approach. The proposed work includes a network with high mobility, using IEEE Along g standard jamming attacks and countermeasures in wireless sensor networks
This document summarizes an article about intrusion detection systems (IDS) for secure mobile ad hoc networks (MANETs). It discusses the distributed and cooperative architecture of IDS for MANETs, where each node runs an IDS agent to detect intrusions locally and cooperate with other nodes. It describes several IDS approaches for MANETs including the Watchdog technique to detect misbehaving nodes, the Pathrater technique to find routes without those nodes, and the CORE technique which uses a collaborative reputation system. The document concludes that considering these IDS techniques can help make MANETs more secure.
Revisiting the experiment on detecting of replay and message modificationiaemedu
This document summarizes a research paper that proposes methods for detecting message modification and replay attacks in ad-hoc wireless networks. It begins with background on security issues in wireless networks and types of attacks. It then reviews existing intrusion detection systems and security techniques. Related work that detects attacks using features from the media access control layer or radio frequency fingerprinting is also discussed. The paper aims to present a simple, economical, and platform-independent system for detecting message modification, replay attacks, and unauthorized users in ad-hoc networks.
MANETs have unique characteristics like dynamic topology, wireless radio medium, limited resources and lack of centralized administration; as a result, they are vulnerable to different types of attacks in different layers of protocol stack. wormhole attack detection in wireless sensor networks
IRJET - Security and Privacy by IDS SystemIRJET Journal
This document summarizes a research paper that proposes an intrusion detection system (IDS) to detect spoofing attacks in wireless sensor networks. The IDS monitors node activities and detects if a node is behaving abnormally or attacking the network. If an attack is detected, the IDS sends an alarm message to the affected node to isolate the attacker. The paper simulates this approach using OTCL language in Network Simulator 2 on Linux. The results show the IDS can efficiently detect spoofing attackers in the wireless network.
A Protocol/Scheme to mitigate DDos attacks using AODV Protocolijsrd.com
MANET(Mobile Adhoc Network) is an emerging technology and have great strength to be applied in battlefields and commercial applications such as traffic surveillance, MANET is infrastructure less without any centralized controller. Each node contains routing capability. Each device in a MANET is independent and can move in any direction. One of the major challenges wireless mobile ad-hoc networks face today is security, because no central controller exists. MANETs are a kind of wireless ad hoc networks that usually has a routable networking environment on top of a link layer ad hoc network. There are many security attacks in MANET and DDoS (Distributed denial of service) is one of them. Our main objective is seeing the effect of DDoS in routing, Packet Drop Rate, End to End Delay, no. of Collisions due to attack on network. And with these parameters and many more also we build secure IDS to detect this kind of attack and block it. In this thesis main objective is to study and implement the security against the DDOS attack. DDoS (Distributed Denial of Service) attacks in the networks are required to be prevented, as early as possible before reaching the victim node. DDos attack causes depletion of the network resources such as network bandwidth, disk space, CPU time, data structures, and network connections. Dealing with DDoS attacks is difficult due to their properties such as dynamic attack rates, big scale of botnets. DDos attack become more difficult to handle if it occurs in wireless network because of the properties of ad hoc network such as dynamic topologies, low battery life, Unicast routing Multicast routing , Frequency of updates or network overhead , scalability , mobile agent based routing ,power aware routing etc. Thus it is better to prevent the distributed denial of service attack rather than allowing it to occur and then taking the necessary steps to handle it. The following quantitative metrics Packet Delivery Ratio (PDR), Number of Collisions are to be used to evaluate the performance of DDoS attacks and their prevention techniques under different combinations in the fixed mobile ad hoc network. In our simulation, the effect of DDoS attacks under different number of attackers is studied.
The networks not present of any centralized or pre-established structure are known as Ad hoc networks. Ad hoc Networks are the class of wireless networks that use multiple hop radio relay. Mobile Ad-hoc Network (MANET) is a combination of wireless mobile nodes and connected other in a dynamic way. ThesisScientist.com
This document summarizes a research paper that analyzes the performance of two routing protocols for mobile ad hoc networks (MANETs) - AODV and TORA - under distributed denial of service (DDoS) attacks. The paper simulates DDoS attacks on networks using the AODV and TORA protocols and compares their performance based on metrics like throughput, delay, network load, and packet delivery ratio. The simulation results indicate that while both protocols are affected by DDoS attacks, AODV experiences less severe performance degradation and is therefore more resilient to such attacks compared to TORA.
This document summarizes an article from the International Journal of Computer Engineering and Technology about enhancing power-aware hybrid intrusion detection architecture in an ad-hoc network using mobile agents. It discusses designing and implementing an energy-efficient anomaly-based cooperative intrusion detection system that applies mobile agent technology to minimize network load, conserve bandwidth, and improve reactivity. It also aims to minimize energy consumption of monitoring nodes using the Back-Propagation algorithm. The paper then presents a new approach to intrusion detection system architecture in ad-hoc networks using mobile agents to determine which network events need monitoring and where.
Wireless ad hoc networks are autonomous nodes that communicate with each other in a
decentralized manner through multi hop radio network. Wireless nodes form a dynamic network
topology and communicate with each other directly without wireless access point. Wireless networks
are particularly vulnerable to intrusions, as they operate in open medium, and use cooperative
strategies for network communication.
ANALYZING THE IMPACT OF EAVES ON ENERGY CONSUMPTION OF AODV ROUTING PROTOCOL ...ijwmn
In this dynamic world, communication is a sine qua non for development. Communication represents
sharing of information which can be local or remote. Though local communications may occur face to face
between individuals remote communications take place among people over long distances. Mobile ad hoc
networks (MANETs) are becoming an interesting part of research due to the increasing growth of wireless
devices (laptops, tablets, mobiles etc.) and as well as wireless internet facilities like 4G/Wi-Fi. A MANET
is any infrastructure-less network formed by independent and self-configuring nodes. Each node acts as
router. In order to send data, the source node initiates a routing process by using a routing protocol. The
nature of the wireless medium is always insecure. So, during routing many attacks can take place. The
main objective of an eavesdropper is to grab the confidential information in the network. This secret
information is used by a malicious node to perform further attacks. Here, the entire problem lies in
identifying the eavesdropper because the eavesdropper acts a normal node in the network. In this paper,
we analyzed the impact of eavesdropper while executing an Ad hoc On Demand routing (AODV) protocol
in MANETs. All the simulations are done using QualNet 5.1 network simulator. From the results, it is found
that the network performance degrades in presence of an eavesdropper.
Analyzing the Impact of Eaves on Energy Consumption of AODV Routing Protocol ...ijwmn
The document analyzes the impact of an eavesdropper on the energy consumption of the AODV routing protocol in mobile ad hoc networks (MANETs). Simulations were conducted using the QualNet simulator for 20, 40, 60, 80, and 100 nodes. The results show that the presence of an eavesdropper degrades network performance and increases energy consumption compared to the standard AODV protocol. Specifically, throughput was lower, delay and jitter were higher, and transmit energy usage increased in scenarios with an eavesdropper node. The eavesdropper attracts network traffic, forcing nodes to transmit more and reducing overall efficiency.
Requisite Trust Based Routing Protocol for WSNAM Publications
This document summarizes a research paper on using a trust-based routing protocol (RTSR) for wireless sensor networks (WSNs). The summary is:
1) The RTSR protocol uses a cluster-based approach and calculates trust values between nodes to securely discover routes while reducing message and route redundancy.
2) Trust values from neighboring nodes are used to calculate a single trust value for each node. Route discovery and trust information is stored at fixed cluster heads.
3) The protocol aims to improve on previous approaches that did not consider security during route discovery. It analyzes performance metrics like energy consumption, number of hops, and delay compared to the LEEACH routing algorithm for WSNs.
Proposed Scheme for Secured Routing in MANETIJAEMSJORNAL
A Mobile Adhoc Network (MANET) is characterized by mobile nodes, multihop wireless connectivity, infrastructure less environment and dynamic topology. A recent trend in Ad Hoc network routing is the reactive on-demand philosophy where routes are established only when required. Stable Routing, Security and Power efficiency are the major concerns in this field. This paper is an effort to study security problems associated with MANETS and solutions to achieve more reliable routing. The ad hoc environment is accessible to both legitimate network users and malicious attackers. The study will help in making protocol more robust against attacks to achieve stable routing in routing protocols.
Different Prediction Methods For Route Recovery In MANETJasmine Culbreth
This document discusses different prediction methods for route recovery in mobile ad hoc networks (MANETs). It begins with an abstract discussing multiple path routing infrastructures in various networks. The document then provides background on ad hoc networks and discusses features of MANETs such as dynamic topologies and variable capacity links. It also introduces the Ad Hoc On-Demand Distance Vector (AODV) routing protocol and discusses topics like route discovery, link availability, and distributed hash tables in MANETs.
The International Journal of Engineering and Science (The IJES)theijes
The document summarizes a study on the Enhanced Adaptive Acknowledge (EAACK) scheme for detecting misbehaving nodes in mobile ad hoc networks (MANETs). It discusses the limitations of existing acknowledgment-based intrusion detection systems like Watchdog, TWOACK, and AACK in handling receiver collisions. The key issues related to acknowledgment-based schemes for detecting misbehavior in MANETs are addressed. The focus is on analyzing the limitations of acknowledgment approaches like AACK and studying EAACK as an improved approach for addressing receiver collisions in MANETs.
Mobile Adhoc Network (MANET) is a self-configuring and infrastructure-less network which consists of mobile devices such as mobiles, laptops, PDA's etc. Because of its lack of infrastructure, wireless mobile communication, dynamic topology, MANET is vulnerable to various security attacks. This survey paper presents an overview of developments of voting and non-voting based certificate revocation mechanisms in past few years. Certificate revocation is an important method used to secure the MANET. Certificate revocation isolates the attacker nodes from participating in network activities by revoking its certificate. Over last few years different schemes are explored for certificate revocation. In concluding section we present the limitations of the current cluster based certificate revocation scheme.
IRJET- Mobile Ad Hoc Network (MANET): Applications, Benefits and Performance ...IRJET Journal
This document summarizes a research paper on Mobile Ad Hoc Networks (MANETs). It discusses MANETs as self-configuring wireless networks without a fixed infrastructure. Key points:
1) MANETs allow nodes to move freely and dynamically change connections. They are useful for applications like military operations and disaster response where infrastructure is not present.
2) Performance issues with MANETs include limited bandwidth, dynamic topology changes, lack of resources at nodes, and security vulnerabilities. Routing protocols must account for these challenges.
3) Global positioning systems (GPS) can utilize MANETs, with nodes sharing location data over wireless links. Accuracy improves with more satellite connections or ground station assistance.
Similar to IRJET- Detection and Localization of IDS Spoofing Attack in Wireless Sensor Network using VANET (20)
TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...IRJET Journal
1) The document discusses the Sungal Tunnel project in Jammu and Kashmir, India, which is being constructed using the New Austrian Tunneling Method (NATM).
2) NATM involves continuous monitoring during construction to adapt to changing ground conditions, and makes extensive use of shotcrete for temporary tunnel support.
3) The methodology section outlines the systematic geotechnical design process for tunnels according to Austrian guidelines, and describes the various steps of NATM tunnel construction including initial and secondary tunnel support.
STUDY THE EFFECT OF RESPONSE REDUCTION FACTOR ON RC FRAMED STRUCTUREIRJET Journal
This study examines the effect of response reduction factors (R factors) on reinforced concrete (RC) framed structures through nonlinear dynamic analysis. Three RC frame models with varying heights (4, 8, and 12 stories) were analyzed in ETABS software under different R factors ranging from 1 to 5. The results showed that displacement increased as the R factor decreased, indicating less linear behavior for lower R factors. Drift also decreased proportionally with increasing R factors from 1 to 5. Shear forces in the frames decreased with higher R factors. In general, R factors of 3 to 5 produced more satisfactory performance with less displacement and drift. The displacement variations between different building heights were consistent at different R factors. This study evaluated how R factors influence
A COMPARATIVE ANALYSIS OF RCC ELEMENT OF SLAB WITH STARK STEEL (HYSD STEEL) A...IRJET Journal
This study compares the use of Stark Steel and TMT Steel as reinforcement materials in a two-way reinforced concrete slab. Mechanical testing is conducted to determine the tensile strength, yield strength, and other properties of each material. A two-way slab design adhering to codes and standards is executed with both materials. The performance is analyzed in terms of deflection, stability under loads, and displacement. Cost analyses accounting for material, durability, maintenance, and life cycle costs are also conducted. The findings provide insights into the economic and structural implications of each material for reinforcement selection and recommendations on the most suitable material based on the analysis.
Effect of Camber and Angles of Attack on Airfoil CharacteristicsIRJET Journal
This document discusses a study analyzing the effect of camber, position of camber, and angle of attack on the aerodynamic characteristics of airfoils. Sixteen modified asymmetric NACA airfoils were analyzed using computational fluid dynamics (CFD) by varying the camber, camber position, and angle of attack. The results showed the relationship between these parameters and the lift coefficient, drag coefficient, and lift to drag ratio. This provides insight into how changes in airfoil geometry impact aerodynamic performance.
A Review on the Progress and Challenges of Aluminum-Based Metal Matrix Compos...IRJET Journal
This document reviews the progress and challenges of aluminum-based metal matrix composites (MMCs), focusing on their fabrication processes and applications. It discusses how various aluminum MMCs have been developed using reinforcements like borides, carbides, oxides, and nitrides to improve mechanical and wear properties. These composites have gained prominence for their lightweight, high-strength and corrosion resistance properties. The document also examines recent advancements in fabrication techniques for aluminum MMCs and their growing applications in industries such as aerospace and automotive. However, it notes that challenges remain around issues like improper mixing of reinforcements and reducing reinforcement agglomeration.
Dynamic Urban Transit Optimization: A Graph Neural Network Approach for Real-...IRJET Journal
This document discusses research on using graph neural networks (GNNs) for dynamic optimization of public transportation networks in real-time. GNNs represent transit networks as graphs with nodes as stops and edges as connections. The GNN model aims to optimize networks using real-time data on vehicle locations, arrival times, and passenger loads. This helps increase mobility, decrease traffic, and improve efficiency. The system continuously trains and infers to adapt to changing transit conditions, providing decision support tools. While research has focused on performance, more work is needed on security, socio-economic impacts, contextual generalization of models, continuous learning approaches, and effective real-time visualization.
Structural Analysis and Design of Multi-Storey Symmetric and Asymmetric Shape...IRJET Journal
This document summarizes a research project that aims to compare the structural performance of conventional slab and grid slab systems in multi-story buildings using ETABS software. The study will analyze both symmetric and asymmetric building models under various loading conditions. Parameters like deflections, moments, shears, and stresses will be examined to evaluate the structural effectiveness of each slab type. The results will provide insights into the comparative behavior of conventional and grid slabs to help engineers and architects select appropriate slab systems based on building layouts and design requirements.
A Review of “Seismic Response of RC Structures Having Plan and Vertical Irreg...IRJET Journal
This document summarizes and reviews a research paper on the seismic response of reinforced concrete (RC) structures with plan and vertical irregularities, with and without infill walls. It discusses how infill walls can improve or reduce the seismic performance of RC buildings, depending on factors like wall layout, height distribution, connection to the frame, and relative stiffness of walls and frames. The reviewed research paper analyzes the behavior of infill walls, effects of vertical irregularities, and seismic performance of high-rise structures under linear static and dynamic analysis. It studies response characteristics like story drift, deflection and shear. The document also provides literature on similar research investigating the effects of infill walls, soft stories, plan irregularities, and different
This document provides a review of machine learning techniques used in Advanced Driver Assistance Systems (ADAS). It begins with an abstract that summarizes key applications of machine learning in ADAS, including object detection, recognition, and decision-making. The introduction discusses the integration of machine learning in ADAS and how it is transforming vehicle safety. The literature review then examines several research papers on topics like lightweight deep learning models for object detection and lane detection models using image processing. It concludes by discussing challenges and opportunities in the field, such as improving algorithm robustness and adaptability.
Long Term Trend Analysis of Precipitation and Temperature for Asosa district,...IRJET Journal
The document analyzes temperature and precipitation trends in Asosa District, Benishangul Gumuz Region, Ethiopia from 1993 to 2022 based on data from the local meteorological station. The results show:
1) The average maximum and minimum annual temperatures have generally decreased over time, with maximum temperatures decreasing by a factor of -0.0341 and minimum by -0.0152.
2) Mann-Kendall tests found the decreasing temperature trends to be statistically significant for annual maximum temperatures but not for annual minimum temperatures.
3) Annual precipitation in Asosa District showed a statistically significant increasing trend.
The conclusions recommend development planners account for rising summer precipitation and declining temperatures in
P.E.B. Framed Structure Design and Analysis Using STAAD ProIRJET Journal
This document discusses the design and analysis of pre-engineered building (PEB) framed structures using STAAD Pro software. It provides an overview of PEBs, including that they are designed off-site with building trusses and beams produced in a factory. STAAD Pro is identified as a key tool for modeling, analyzing, and designing PEBs to ensure their performance and safety under various load scenarios. The document outlines modeling structural parts in STAAD Pro, evaluating structural reactions, assigning loads, and following international design codes and standards. In summary, STAAD Pro is used to design and analyze PEB framed structures to ensure safety and code compliance.
A Review on Innovative Fiber Integration for Enhanced Reinforcement of Concre...IRJET Journal
This document provides a review of research on innovative fiber integration methods for reinforcing concrete structures. It discusses studies that have explored using carbon fiber reinforced polymer (CFRP) composites with recycled plastic aggregates to develop more sustainable strengthening techniques. It also examines using ultra-high performance fiber reinforced concrete to improve shear strength in beams. Additional topics covered include the dynamic responses of FRP-strengthened beams under static and impact loads, and the performance of preloaded CFRP-strengthened fiber reinforced concrete beams. The review highlights the potential of fiber composites to enable more sustainable and resilient construction practices.
Survey Paper on Cloud-Based Secured Healthcare SystemIRJET Journal
This document summarizes a survey on securing patient healthcare data in cloud-based systems. It discusses using technologies like facial recognition, smart cards, and cloud computing combined with strong encryption to securely store patient data. The survey found that healthcare professionals believe digitizing patient records and storing them in a centralized cloud system would improve access during emergencies and enable more efficient care compared to paper-based systems. However, ensuring privacy and security of patient data is paramount as healthcare incorporates these digital technologies.
Review on studies and research on widening of existing concrete bridgesIRJET Journal
This document summarizes several studies that have been conducted on widening existing concrete bridges. It describes a study from China that examined load distribution factors for a bridge widened with composite steel-concrete girders. It also outlines challenges and solutions for widening a bridge in the UAE, including replacing bearings and stitching the new and existing structures. Additionally, it discusses two bridge widening projects in New Zealand that involved adding precast beams and stitching to connect structures. Finally, safety measures and challenges for strengthening a historic bridge in Switzerland under live traffic are presented.
React based fullstack edtech web applicationIRJET Journal
The document describes the architecture of an educational technology web application built using the MERN stack. It discusses the frontend developed with ReactJS, backend with NodeJS and ExpressJS, and MongoDB database. The frontend provides dynamic user interfaces, while the backend offers APIs for authentication, course management, and other functions. MongoDB enables flexible data storage. The architecture aims to provide a scalable, responsive platform for online learning.
A Comprehensive Review of Integrating IoT and Blockchain Technologies in the ...IRJET Journal
This paper proposes integrating Internet of Things (IoT) and blockchain technologies to help implement objectives of India's National Education Policy (NEP) in the education sector. The paper discusses how blockchain could be used for secure student data management, credential verification, and decentralized learning platforms. IoT devices could create smart classrooms, automate attendance tracking, and enable real-time monitoring. Blockchain would ensure integrity of exam processes and resource allocation, while smart contracts automate agreements. The paper argues this integration has potential to revolutionize education by making it more secure, transparent and efficient, in alignment with NEP goals. However, challenges like infrastructure needs, data privacy, and collaborative efforts are also discussed.
A REVIEW ON THE PERFORMANCE OF COCONUT FIBRE REINFORCED CONCRETE.IRJET Journal
This document provides a review of research on the performance of coconut fibre reinforced concrete. It summarizes several studies that tested different volume fractions and lengths of coconut fibres in concrete mixtures with varying compressive strengths. The studies found that coconut fibre improved properties like tensile strength, toughness, crack resistance, and spalling resistance compared to plain concrete. Volume fractions of 2-5% and fibre lengths of 20-50mm produced the best results. The document concludes that using a 4-5% volume fraction of coconut fibres 30-40mm in length with M30-M60 grade concrete would provide benefits based on previous research.
Optimizing Business Management Process Workflows: The Dynamic Influence of Mi...IRJET Journal
The document discusses optimizing business management processes through automation using Microsoft Power Automate and artificial intelligence. It provides an overview of Power Automate's key components and features for automating workflows across various apps and services. The document then presents several scenarios applying automation solutions to common business processes like data entry, monitoring, HR, finance, customer support, and more. It estimates the potential time and cost savings from implementing automation for each scenario. Finally, the conclusion emphasizes the transformative impact of AI and automation tools on business processes and the need for ongoing optimization.
Multistoried and Multi Bay Steel Building Frame by using Seismic DesignIRJET Journal
The document describes the seismic design of a G+5 steel building frame located in Roorkee, India according to Indian codes IS 1893-2002 and IS 800. The frame was analyzed using the equivalent static load method and response spectrum method, and its response in terms of displacements and shear forces were compared. Based on the analysis, the frame was designed as a seismic-resistant steel structure according to IS 800:2007. The software STAAD Pro was used for the analysis and design.
Cost Optimization of Construction Using Plastic Waste as a Sustainable Constr...IRJET Journal
This research paper explores using plastic waste as a sustainable and cost-effective construction material. The study focuses on manufacturing pavers and bricks using recycled plastic and partially replacing concrete with plastic alternatives. Initial results found that pavers and bricks made from recycled plastic demonstrate comparable strength and durability to traditional materials while providing environmental and cost benefits. Additionally, preliminary research indicates incorporating plastic waste as a partial concrete replacement significantly reduces construction costs without compromising structural integrity. The outcomes suggest adopting plastic waste in construction can address plastic pollution while optimizing costs, promoting more sustainable building practices.
A brand new catalog for the 2024 edition of IWISS. We have enriched our product range and have more innovations in electrician tools, plumbing tools, wire rope tools and banding tools. Let's explore together!
Understanding Cybersecurity Breaches: Causes, Consequences, and PreventionBert Blevins
Cybersecurity breaches are a growing threat in today’s interconnected digital landscape, affecting individuals, businesses, and governments alike. These breaches compromise sensitive information and erode trust in online services and systems. Understanding the causes, consequences, and prevention strategies of cybersecurity breaches is crucial to protect against these pervasive risks.
Cybersecurity breaches refer to unauthorized access, manipulation, or destruction of digital information or systems. They can occur through various means such as malware, phishing attacks, insider threats, and vulnerabilities in software or hardware. Once a breach happens, cybercriminals can exploit the compromised data for financial gain, espionage, or sabotage. Causes of breaches include software and hardware vulnerabilities, phishing attacks, insider threats, weak passwords, and a lack of security awareness.
The consequences of cybersecurity breaches are severe. Financial loss is a significant impact, as organizations face theft of funds, legal fees, and repair costs. Breaches also damage reputations, leading to a loss of trust among customers, partners, and stakeholders. Regulatory penalties are another consequence, with hefty fines imposed for non-compliance with data protection regulations. Intellectual property theft undermines innovation and competitiveness, while disruptions of critical services like healthcare and utilities impact public safety and well-being.
Encontro anual da comunidade Splunk, onde discutimos todas as novidades apresentadas na conferência anual da Spunk, a .conf24 realizada em junho deste ano em Las Vegas.
Neste vídeo, trago os pontos chave do encontro, como:
- AI Assistant para uso junto com a SPL
- SPL2 para uso em Data Pipelines
- Ingest Processor
- Enterprise Security 8.0 (Maior atualização deste seu release)
- Federated Analytics
- Integração com Cisco XDR e Cisto Talos
- E muito mais.
Deixo ainda, alguns links com relatórios e conteúdo interessantes que podem ajudar no esclarecimento dos produtos e funções.
https://www.splunk.com/en_us/campaigns/the-hidden-costs-of-downtime.html
https://www.splunk.com/en_us/pdfs/gated/ebooks/building-a-leading-observability-practice.pdf
https://www.splunk.com/en_us/pdfs/gated/ebooks/building-a-modern-security-program.pdf
Nosso grupo oficial da Splunk:
https://usergroups.splunk.com/sao-paulo-splunk-user-group/
Software Engineering and Project Management - Introduction to Project ManagementPrakhyath Rai
Introduction to Project Management: Introduction, Project and Importance of Project Management, Contract Management, Activities Covered by Software Project Management, Plans, Methods and Methodologies, some ways of categorizing Software Projects, Stakeholders, Setting Objectives, Business Case, Project Success and Failure, Management and Management Control, Project Management life cycle, Traditional versus Modern Project Management Practices.
Response & Safe AI at Summer School of AI at IIITHIIIT Hyderabad
Talk covering Guardrails , Jailbreak, What is an alignment problem? RLHF, EU AI Act, Machine & Graph unlearning, Bias, Inconsistency, Probing, Interpretability, Bias
OCS Training Institute is pleased to co-operate with
a Global provider of Rig Inspection/Audits,
Commission-ing, Compliance & Acceptance as well as
& Engineering for Offshore Drilling Rigs, to deliver
Drilling Rig Inspec-tion Workshops (RIW) which
teaches the inspection & maintenance procedures
required to ensure equipment integrity. Candidates
learn to implement the relevant standards &
understand industry requirements so that they can
verify the condition of a rig’s equipment & improve
safety, thus reducing the number of accidents and
protecting the asset.
20CDE09- INFORMATION DESIGN
UNIT I INCEPTION OF INFORMATION DESIGN
Introduction and Definition
History of Information Design
Need of Information Design
Types of Information Design
Identifying audience
Defining the audience and their needs
Inclusivity and Visual impairment
Case study.
Exploring Deep Learning Models for Image Recognition: A Comparative Reviewsipij
Image recognition, which comes under Artificial Intelligence (AI) is a critical aspect of computer vision,
enabling computers or other computing devices to identify and categorize objects within images. Among
numerous fields of life, food processing is an important area, in which image processing plays a vital role,
both for producers and consumers. This study focuses on the binary classification of strawberries, where
images are sorted into one of two categories. We Utilized a dataset of strawberry images for this study; we
aim to determine the effectiveness of different models in identifying whether an image contains
strawberries. This research has practical applications in fields such as agriculture and quality control. We
compared various popular deep learning models, including MobileNetV2, Convolutional Neural Networks
(CNN), and DenseNet121, for binary classification of strawberry images. The accuracy achieved by
MobileNetV2 is 96.7%, CNN is 99.8%, and DenseNet121 is 93.6%. Through rigorous testing and analysis,
our results demonstrate that CNN outperforms the other models in this task. In the future, the deep
learning models can be evaluated on a richer and larger number of images (datasets) for better/improved
results.
A vernier caliper is a precision instrument used to measure dimensions with high accuracy. It can measure internal and external dimensions, as well as depths.
Here is a detailed description of its parts and how to use it.