This document summarizes several studies that have been conducted on widening existing concrete bridges. It describes a study from China that examined load distribution factors for a bridge widened with composite steel-concrete girders. It also outlines challenges and solutions for widening a bridge in the UAE, including replacing bearings and stitching the new and existing structures. Additionally, it discusses two bridge widening projects in New Zealand that involved adding precast beams and stitching to connect structures. Finally, safety measures and challenges for strengthening a historic bridge in Switzerland under live traffic are presented.
Report
Share
Report
Share
1 of 4
Download to read offline
More Related Content
Similar to Review on studies and research on widening of existing concrete bridges
The document describes the process of designing and testing models of a truss bridge made of fettuccine. Four truss bridge models were constructed and tested to evaluate their load bearing efficiency. The final design adopted the Warren truss pattern and used an I-beam structure to strengthen the beams. Various materials and methods were tested to optimize the bridge's strength and weight. Load testing provided data to analyze failures and improve subsequent designs.
Analysis and Design of Reinforced Concrete Solid Slab Bridgeijtsrd
Structural planning and analysis is an art and science of designing with economy, elegance and sturdiness. Structural designing requires an in depth structural analysis on which the planning is predicted, to compete within the ever competitive market, The use of software can save many man hours and efforts in structural analysis and an effort was made in the present study to achieve this objective. The purpose of this study is to analyze and design the solid deck slab bridge by STAAD Pro and manual method under different loading conditions. And also the analysis results in term of shear, bending moment, axial force and deflection were checked by STAAD Pro which is passes through many different load combinations. The maximum design moments resulting from the combinations of various loading cases.part 1 The study deals with the planning and analysis of Solid Deck Slab using Staad Pro software. In this study solid deck slab having 8.2 m long span and the thickness of slab 0.65 m and the slab is simply supported. The drafting and detailing work was completed using AutoCAD software and thereafter the entire design work was completed using “Staad Pro v8i ss6. Pooja Kumre | Abhay Kumar Jha | Barun Kumar "Analysis and Design of Reinforced Concrete Solid Slab Bridge" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-6 , October 2021, URL: https://www.ijtsrd.com/papers/ijtsrd47524.pdf Paper URL : https://www.ijtsrd.com/engineering/civil-engineering/47524/analysis-and-design-of-reinforced-concrete-solid-slab-bridge/pooja-kumre
Comparative Analysis and Design of Voided Slab and RCC I Girder with Solid Sl...ijtsrd
This thesis is basically based on the comparison of the use of voided slab, RCC Solid slab and RCC Girder. In this study analysis and cost comparison of RCC Solid slab deck, RCC Voided slab deck and RCC Girder is done for superstructure spanning 20 m length. Solid slabs having greater span are uneconomical due to heavy dead load of concrete. To make it economical longitudinal beams are provided for spans greater than 10.0 m. Reinforced Concrete Girder is generally adopted for a fly over or road bridge, but in case of a river bridge with submersible superstructure, the longitudinal beams creates obstruction to the flow of water and results in additional stresses in cross direction on beams. To reduce the self weight of concrete without sacrificing its flexural strength, in solid slab voids are incorporated in concrete section. This technic offers many advantages over a conventional solid concrete slab like reduced material use, lower total cost of construction, and increased structural efficiency. This report also shows that the dead load of bridge superstructure can be reduced by providing voids in concrete where it is unnecessarily provided. Presence of voids within the concrete structure makes analysis of structure very complicated. The analysis of RCC Solid slab, RCC Girder and RCC voided slab deck for various loads as specified in IRC is done using staad pro software for span length of 20 m and width of 15.10 m. The analysis illustrates the behavior of bending moments, Shear Force, displacements, reactions for various load conditions. It is concluded that use of voided slab is more feasible for 20 m length and 15.10 m width. It is also economical as compared to solid slab and Reinforced concrete Girder. Kunal Songra | M. C. Paliwal "Comparative Analysis and Design of Voided Slab and RCC I Girder with Solid Slab in Bridge Structure" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-6 , October 2021, URL: https://www.ijtsrd.com/papers/ijtsrd47679.pdf Paper URL : https://www.ijtsrd.com/engineering/civil-engineering/47679/comparative-analysis-and-design-of-voided-slab-and-rcc-i-girder-with-solid-slab-in-bridge-structure/kunal-songra
This document summarizes research presented at the 2015 Transportation Research Board meeting regarding new approaches to bridge construction.
Researchers at LSU developed a new approach slab system using precast deck slabs paired with geotextile-reinforced embankments to eliminate differential settlement issues that cause "end bumps" at bridge approaches in Louisiana. Field testing over two years showed the new system had better performance than traditional methods.
Additional research showed that connections and grouts used in precast deck panels are critical to their long-term performance. Tests identified best practices for surface preparation, grout selection, and design considerations to ensure durability of the connections under loading.
Other research presented testing of a hybrid jacketing
The document discusses the design and construction of a 4-lane 90m railway over bridge in Chand Sarai, Lucknow. Key steps in the construction process include surveying, engineering design, laying pile foundations, installing bearings and girders, shuttering, and concreting. Tests were conducted on materials and foundations to ensure quality. The bridge was designed to allow road traffic to safely pass over the railway line.
USING FINITE ELEMENT METHOD FOR ANALYSIS OF SINGLE AND MULTICELL BOX GIRDER B...IRJET Journal
1. The document discusses the finite element analysis of single cell and multicell box girder bridges. It analyzes bridges with and without diaphragms using both conventional methods and finite element analysis.
2. The study aims to validate the conventional analysis method by comparing results to finite element analysis, and examine the effects of end and intermediate diaphragms on different bridge cells. It also analyzes the impact of temperature changes.
3. Previous literature on finite element analysis of box girder bridges is reviewed, covering topics like moment and shear distribution factors, curved bridges, and models that account for effects like torsional warping.
The Downtown Crossing bridge project in Louisville, Kentucky is progressing ahead of schedule. Steel work is expected to be completed by late October 2015 and the bridge is scheduled to open to traffic in January 2016. The 642m, $860 million cable-stayed bridge will connect Louisville to Covington, Indiana, doubling traffic capacity across the Ohio River. Its design incorporates measures like flexible tower foundations and a three-tower arrangement to allow for movement, as well as aesthetic elements like unobstructed tower views. Service life modeling was used to design the bridge to last 100 years with minimal maintenance.
IRJET- Parametric Study of RC Deck Slab Bridge with Varying Thickness: A Conc...IRJET Journal
This document summarizes research by various authors on the parametric study and analysis of reinforced concrete deck slab bridges with varying thickness. It discusses research analyzing the behavior of T-beam bridges under different loadings and spans. The document reviews studies on integral bridges, box girder bridges, and the effects of parameters like skew angle, span length, and number of girders on bridge behavior. It identifies gaps in existing research and the need for further studies on the economic and safe design of bridges.
Analysis of PSC Bridge for Highway Structures using Softwareijtsrd
Bridge is most useful structure for highway Structures and River and Canal structures in without any obstruction of water, traffic is flow out on structures. In Bridge structures many sort of vehicles like little vehicles, light vehicles and substantial vehicles are streaming in inevitably, so primary idea of bridge is the manner by which to end up a safe under different kinds of stacking state of vehicles in a single bearing. By and large the vehicles are stream in structure, the heap of vehicles are Both side scatter in 45 degree from edge of feel burnt out on vehicle in both longitudinal and parallel bearings implies ranges heading and length of Structure headings. So this scattering of load is specifically influenced to best of bridge Deck section and after that longitudinal support and in addition cross brace. After that the long individual from bridge superstructure like brace is transported the heap towards the substructure of Bridge and afterward establishment to soil. The plan of superstructure is by and large utilized with RCC, however nowa days in length range individual from Bridge utilizing with PSC, forget significantly more preferred standpoint and security of Structure. Nitin Singh Raghuwanshi | Abhay Kumar Jha | Barun Kumar "Analysis of PSC Bridge for Highway Structures using Software" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-6 , October 2021, URL: https://www.ijtsrd.com/papers/ijtsrd47576.pdf Paper URL : https://www.ijtsrd.com/engineering/civil-engineering/47576/analysis-of-psc-bridge-for-highway-structures-using-software/nitin-singh-raghuwanshi
Design and Analysis of a Girder Bridge for Highway Structures Using Sap 2000ijtsrd
In this study, a comparative study supported two differing types of bridges i.e. Deck type and Pre stressed deck type using finite element analysis in SAP 2000 is ready , considering same loading class 70 R as per I.R.C. loading. During this study well also prepare a price analysis of both the structures using S.O.R. C.P.W.D. 2014. This sort of bridges is more preferred when it involves connectivity to short distances. So, its necessary to update the analysis and style methods. Here, during this paper, theres an effort to review the comparison of maximum bending moment thanks to super load during a girder and slab bridge an equivalent bridge is analyzed as a three dimensional model in finite element software as SAP2000, apply an equivalent loading finished conventional methods and compared the results. The utmost bending moment results obtained from finite element model. Nitin Singh Raghuwanshi | Abhay Kumar Jha | Barun Kumar "Design and Analysis of a Girder Bridge for Highway Structures Using Sap 2000" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-6 , October 2021, URL: https://www.ijtsrd.com/papers/ijtsrd47575.pdf Paper URL : https://www.ijtsrd.com/engineering/civil-engineering/47575/design-and-analysis-of-a-girder-bridge-for-highway-structures-using-sap-2000/nitin-singh-raghuwanshi
This document summarizes a student project to assess damage to 3 bridges in Kathmandu Valley, Nepal and recommend retrofitting strategies. The project involves reviewing literature on bridge damage assessment, conducting field investigations to gather bridge condition data using visual inspections and non-destructive testing, analyzing the data using structural engineering principles, and formulating retrofitting strategies for each bridge based on the damage assessments. The expected outcomes are to identify any structural issues, perform load and risk analyses, recommend maintenance or repairs, and assess remaining service life.
A Review Paper on Analysis of T Beam Deck Type and T Beam Pre Stressed Deck B...ijtsrd
A Bridge is a structure built to span physical obstacles without closing the way underneath such as a body of water, valley, or road, for the purpose of providing passage over the obstacle. K is the portion of a bridge that acts as the roadway in the support of vehicular or pedestrian traffic. While deck parts like trusses, girders, rails, arches, posts and cantilevers assume a number of forms and types, there are relatively few bridge deck types given the utilitarian nature of the component. Rudresh Meena | Prof. Afzal Khan "A Review Paper on Analysis of T Beam Deck Type and T Beam Pre-Stressed Deck Bridge" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-7 | Issue-2 , April 2023, URL: https://www.ijtsrd.com.com/papers/ijtsrd57385.pdf Paper URL: https://www.ijtsrd.com.com/engineering/civil-engineering/57385/a-review-paper-on-analysis-of-t-beam-deck-type-and-t-beam-prestressed-deck-bridge/rudresh-meena
Sustainable Solution for Shoring Method of Cross-Creek Bridge in Ankeng MRT S...Dr. Amarjeet Singh
In the Ankeng Light Rail MRT system (ALRMS) project, the U7 box girder passes crossing the Erbads creek and needs a temporary supporting system for the construction work. In this study, three temporary shoring system options were proposed to be the construction method. The D-B Contractor, New Asia construction and Development Corporation, evaluated and selected the optimal choice, The Steel truss frame with supporting beams, to serve as the temporary supporting system. Compare the deflection of Δmax and Δactual, which are 1.609 cm and 1.59 cm, respectively. This result presented that the shoring system composed of the H912*302*18*37 supporting beams and steel truss frame had achieved outstanding performance and work to construct the U7 box girder. This paper presents how the three options are evaluated and the detailed construction processes along with the survey verification for the method.
Rail Structure Interaction Analysis of Steel Composite Metro BridgeIRJET Journal
This document summarizes a study on rail structure interaction analysis of a steel composite metro bridge in Mumbai, India. The study uses 3D finite element modeling software to analyze stresses in the rails due to temperature variations and train loads. The total bridge length analyzed is 743.43 meters, of which 260.43 meters is steel composite. The objectives are to determine additional rail stresses and bearing forces, and check if stresses are within permissible limits set by standards. Nonlinear springs are used to model the connection between rails and deck, and results will show axial rail stresses along the bridge length.
This document analyzes the effect of skew on stress resultants in T-beam bridges under various Indian Road Congress (IRC) loading conditions. T-beam bridge models with spans of 14m and varying skew angles from 0-45 degrees were modeled and analyzed using CSi Bridge software. The results show that bending moment, shear force, and torsion increase with higher skew angles and heavier loadings. Specifically, IRC AA tracked loading produces 10-15% higher bending moments than IRC 70R loading. IRC AA tracked and wheeled loadings also produce significantly different stress responses, with up to 40% variation. The analysis provides guidance on the behavior of skewed T-beam bridges under IRC standard loadings.
PARAMETRIC STUDY ON SLAB DECK BRIDGES USING RESPONSE SURFACE METHODIRJET Journal
This document discusses a parametric study carried out on slab deck bridges using the Response Surface Method (RSM). The study considers the effects of span length, live load, and thickness of the wearing coat on the depth, moment, and reinforcement area required for the bridge deck slab. An Excel program is developed to design the deck slab according to different design combinations obtained from RSM. Statistical analysis using ANOVA is performed to determine the dependency of the response variables on the design parameters. Regression equations are obtained for the depth, moment, and reinforcement area in terms of the design factors considered. The results of the study are then compared to an existing reinforced concrete slab deck bridge.
Comparative study on Time period and Frequency of Full Arch and Vierendeel T...IRJET Journal
This document presents a comparative study on the time period and frequency of full arch and vierendeel truss steel pedestrian bridges with spans of 40m, 50m, and 60m. Finite element analysis is performed using SAP 2000 software to analyze the bridges under dynamic excitation. The time history analysis is conducted according to IRC codes to determine the natural frequency and time period of different vibration modes. Tables show the calculated time periods and frequencies for the first 12 modes of both bridge types over the three spans. Charts compare the variation of time period and frequency with mode shape. The results show differences in the dynamic response of full arch bridges versus vierendeel truss bridges, and how responses change with increasing span length.
Three futuristic composite bridge technologies - Bridge in a Backpack, Hybrid-Composite Beam, and ProCoBeam - are described that result in fast-track construction and more sustainable bridges with expected lifespans over 100 years. The Bridge in a Backpack uses fiber reinforced polymer tubes filled with self-consolidating concrete as main load-bearing elements. The Hybrid-Composite Beam has a fiber reinforced polymer shell housing a self-consolidating concrete arch tied by galvanized prestressing strands. ProCoBeam uses a shear composite dowel to connect a bottom steel T-section to a top concrete T-section.
The Temple Mills Bridge in London was reconstructed from 2004-2006. The original 1963 bridge had deteriorated due to water ingress and reinforcement corrosion. The reconstruction involved demolishing the old bridge down to the existing foundations and riverbed, then constructing new piers, abutments, and a precast concrete deck. Environmental considerations like flood risk, habitat creation, and noise/pollution mitigation played a key role. Careful planning and risk management were needed due to the bridge's strategic location and need to maintain traffic flow during construction. The reconstruction secured this important transport link in advance of nearby Olympic development works.
Similar to Review on studies and research on widening of existing concrete bridges (20)
TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...IRJET Journal
1) The document discusses the Sungal Tunnel project in Jammu and Kashmir, India, which is being constructed using the New Austrian Tunneling Method (NATM).
2) NATM involves continuous monitoring during construction to adapt to changing ground conditions, and makes extensive use of shotcrete for temporary tunnel support.
3) The methodology section outlines the systematic geotechnical design process for tunnels according to Austrian guidelines, and describes the various steps of NATM tunnel construction including initial and secondary tunnel support.
STUDY THE EFFECT OF RESPONSE REDUCTION FACTOR ON RC FRAMED STRUCTUREIRJET Journal
This study examines the effect of response reduction factors (R factors) on reinforced concrete (RC) framed structures through nonlinear dynamic analysis. Three RC frame models with varying heights (4, 8, and 12 stories) were analyzed in ETABS software under different R factors ranging from 1 to 5. The results showed that displacement increased as the R factor decreased, indicating less linear behavior for lower R factors. Drift also decreased proportionally with increasing R factors from 1 to 5. Shear forces in the frames decreased with higher R factors. In general, R factors of 3 to 5 produced more satisfactory performance with less displacement and drift. The displacement variations between different building heights were consistent at different R factors. This study evaluated how R factors influence
A COMPARATIVE ANALYSIS OF RCC ELEMENT OF SLAB WITH STARK STEEL (HYSD STEEL) A...IRJET Journal
This study compares the use of Stark Steel and TMT Steel as reinforcement materials in a two-way reinforced concrete slab. Mechanical testing is conducted to determine the tensile strength, yield strength, and other properties of each material. A two-way slab design adhering to codes and standards is executed with both materials. The performance is analyzed in terms of deflection, stability under loads, and displacement. Cost analyses accounting for material, durability, maintenance, and life cycle costs are also conducted. The findings provide insights into the economic and structural implications of each material for reinforcement selection and recommendations on the most suitable material based on the analysis.
Effect of Camber and Angles of Attack on Airfoil CharacteristicsIRJET Journal
This document discusses a study analyzing the effect of camber, position of camber, and angle of attack on the aerodynamic characteristics of airfoils. Sixteen modified asymmetric NACA airfoils were analyzed using computational fluid dynamics (CFD) by varying the camber, camber position, and angle of attack. The results showed the relationship between these parameters and the lift coefficient, drag coefficient, and lift to drag ratio. This provides insight into how changes in airfoil geometry impact aerodynamic performance.
A Review on the Progress and Challenges of Aluminum-Based Metal Matrix Compos...IRJET Journal
This document reviews the progress and challenges of aluminum-based metal matrix composites (MMCs), focusing on their fabrication processes and applications. It discusses how various aluminum MMCs have been developed using reinforcements like borides, carbides, oxides, and nitrides to improve mechanical and wear properties. These composites have gained prominence for their lightweight, high-strength and corrosion resistance properties. The document also examines recent advancements in fabrication techniques for aluminum MMCs and their growing applications in industries such as aerospace and automotive. However, it notes that challenges remain around issues like improper mixing of reinforcements and reducing reinforcement agglomeration.
Dynamic Urban Transit Optimization: A Graph Neural Network Approach for Real-...IRJET Journal
This document discusses research on using graph neural networks (GNNs) for dynamic optimization of public transportation networks in real-time. GNNs represent transit networks as graphs with nodes as stops and edges as connections. The GNN model aims to optimize networks using real-time data on vehicle locations, arrival times, and passenger loads. This helps increase mobility, decrease traffic, and improve efficiency. The system continuously trains and infers to adapt to changing transit conditions, providing decision support tools. While research has focused on performance, more work is needed on security, socio-economic impacts, contextual generalization of models, continuous learning approaches, and effective real-time visualization.
Structural Analysis and Design of Multi-Storey Symmetric and Asymmetric Shape...IRJET Journal
This document summarizes a research project that aims to compare the structural performance of conventional slab and grid slab systems in multi-story buildings using ETABS software. The study will analyze both symmetric and asymmetric building models under various loading conditions. Parameters like deflections, moments, shears, and stresses will be examined to evaluate the structural effectiveness of each slab type. The results will provide insights into the comparative behavior of conventional and grid slabs to help engineers and architects select appropriate slab systems based on building layouts and design requirements.
A Review of “Seismic Response of RC Structures Having Plan and Vertical Irreg...IRJET Journal
This document summarizes and reviews a research paper on the seismic response of reinforced concrete (RC) structures with plan and vertical irregularities, with and without infill walls. It discusses how infill walls can improve or reduce the seismic performance of RC buildings, depending on factors like wall layout, height distribution, connection to the frame, and relative stiffness of walls and frames. The reviewed research paper analyzes the behavior of infill walls, effects of vertical irregularities, and seismic performance of high-rise structures under linear static and dynamic analysis. It studies response characteristics like story drift, deflection and shear. The document also provides literature on similar research investigating the effects of infill walls, soft stories, plan irregularities, and different
This document provides a review of machine learning techniques used in Advanced Driver Assistance Systems (ADAS). It begins with an abstract that summarizes key applications of machine learning in ADAS, including object detection, recognition, and decision-making. The introduction discusses the integration of machine learning in ADAS and how it is transforming vehicle safety. The literature review then examines several research papers on topics like lightweight deep learning models for object detection and lane detection models using image processing. It concludes by discussing challenges and opportunities in the field, such as improving algorithm robustness and adaptability.
Long Term Trend Analysis of Precipitation and Temperature for Asosa district,...IRJET Journal
The document analyzes temperature and precipitation trends in Asosa District, Benishangul Gumuz Region, Ethiopia from 1993 to 2022 based on data from the local meteorological station. The results show:
1) The average maximum and minimum annual temperatures have generally decreased over time, with maximum temperatures decreasing by a factor of -0.0341 and minimum by -0.0152.
2) Mann-Kendall tests found the decreasing temperature trends to be statistically significant for annual maximum temperatures but not for annual minimum temperatures.
3) Annual precipitation in Asosa District showed a statistically significant increasing trend.
The conclusions recommend development planners account for rising summer precipitation and declining temperatures in
P.E.B. Framed Structure Design and Analysis Using STAAD ProIRJET Journal
This document discusses the design and analysis of pre-engineered building (PEB) framed structures using STAAD Pro software. It provides an overview of PEBs, including that they are designed off-site with building trusses and beams produced in a factory. STAAD Pro is identified as a key tool for modeling, analyzing, and designing PEBs to ensure their performance and safety under various load scenarios. The document outlines modeling structural parts in STAAD Pro, evaluating structural reactions, assigning loads, and following international design codes and standards. In summary, STAAD Pro is used to design and analyze PEB framed structures to ensure safety and code compliance.
A Review on Innovative Fiber Integration for Enhanced Reinforcement of Concre...IRJET Journal
This document provides a review of research on innovative fiber integration methods for reinforcing concrete structures. It discusses studies that have explored using carbon fiber reinforced polymer (CFRP) composites with recycled plastic aggregates to develop more sustainable strengthening techniques. It also examines using ultra-high performance fiber reinforced concrete to improve shear strength in beams. Additional topics covered include the dynamic responses of FRP-strengthened beams under static and impact loads, and the performance of preloaded CFRP-strengthened fiber reinforced concrete beams. The review highlights the potential of fiber composites to enable more sustainable and resilient construction practices.
Survey Paper on Cloud-Based Secured Healthcare SystemIRJET Journal
This document summarizes a survey on securing patient healthcare data in cloud-based systems. It discusses using technologies like facial recognition, smart cards, and cloud computing combined with strong encryption to securely store patient data. The survey found that healthcare professionals believe digitizing patient records and storing them in a centralized cloud system would improve access during emergencies and enable more efficient care compared to paper-based systems. However, ensuring privacy and security of patient data is paramount as healthcare incorporates these digital technologies.
React based fullstack edtech web applicationIRJET Journal
The document describes the architecture of an educational technology web application built using the MERN stack. It discusses the frontend developed with ReactJS, backend with NodeJS and ExpressJS, and MongoDB database. The frontend provides dynamic user interfaces, while the backend offers APIs for authentication, course management, and other functions. MongoDB enables flexible data storage. The architecture aims to provide a scalable, responsive platform for online learning.
A Comprehensive Review of Integrating IoT and Blockchain Technologies in the ...IRJET Journal
This paper proposes integrating Internet of Things (IoT) and blockchain technologies to help implement objectives of India's National Education Policy (NEP) in the education sector. The paper discusses how blockchain could be used for secure student data management, credential verification, and decentralized learning platforms. IoT devices could create smart classrooms, automate attendance tracking, and enable real-time monitoring. Blockchain would ensure integrity of exam processes and resource allocation, while smart contracts automate agreements. The paper argues this integration has potential to revolutionize education by making it more secure, transparent and efficient, in alignment with NEP goals. However, challenges like infrastructure needs, data privacy, and collaborative efforts are also discussed.
A REVIEW ON THE PERFORMANCE OF COCONUT FIBRE REINFORCED CONCRETE.IRJET Journal
This document provides a review of research on the performance of coconut fibre reinforced concrete. It summarizes several studies that tested different volume fractions and lengths of coconut fibres in concrete mixtures with varying compressive strengths. The studies found that coconut fibre improved properties like tensile strength, toughness, crack resistance, and spalling resistance compared to plain concrete. Volume fractions of 2-5% and fibre lengths of 20-50mm produced the best results. The document concludes that using a 4-5% volume fraction of coconut fibres 30-40mm in length with M30-M60 grade concrete would provide benefits based on previous research.
Optimizing Business Management Process Workflows: The Dynamic Influence of Mi...IRJET Journal
The document discusses optimizing business management processes through automation using Microsoft Power Automate and artificial intelligence. It provides an overview of Power Automate's key components and features for automating workflows across various apps and services. The document then presents several scenarios applying automation solutions to common business processes like data entry, monitoring, HR, finance, customer support, and more. It estimates the potential time and cost savings from implementing automation for each scenario. Finally, the conclusion emphasizes the transformative impact of AI and automation tools on business processes and the need for ongoing optimization.
Multistoried and Multi Bay Steel Building Frame by using Seismic DesignIRJET Journal
The document describes the seismic design of a G+5 steel building frame located in Roorkee, India according to Indian codes IS 1893-2002 and IS 800. The frame was analyzed using the equivalent static load method and response spectrum method, and its response in terms of displacements and shear forces were compared. Based on the analysis, the frame was designed as a seismic-resistant steel structure according to IS 800:2007. The software STAAD Pro was used for the analysis and design.
Cost Optimization of Construction Using Plastic Waste as a Sustainable Constr...IRJET Journal
This research paper explores using plastic waste as a sustainable and cost-effective construction material. The study focuses on manufacturing pavers and bricks using recycled plastic and partially replacing concrete with plastic alternatives. Initial results found that pavers and bricks made from recycled plastic demonstrate comparable strength and durability to traditional materials while providing environmental and cost benefits. Additionally, preliminary research indicates incorporating plastic waste as a partial concrete replacement significantly reduces construction costs without compromising structural integrity. The outcomes suggest adopting plastic waste in construction can address plastic pollution while optimizing costs, promoting more sustainable building practices.
Solving Linear Differential Equations with Constant CoefficientsIRJET Journal
1) The document discusses methods for finding the solutions to linear differential equations with constant coefficients. It defines such an equation and explains that the complete solution is the combination of the complementary function (C.F.) and particular integral (P.I.).
2) Various methods are presented for determining the C.F. depending on whether the roots of the auxiliary equation are real, imaginary, repeated, etc.
3) Rules are provided for obtaining the P.I. based on the type of function involved (exponential, trigonometric, power, etc.). Examples are worked through to demonstrate the full solution process.
A brief introduction to quadcopter (drone) working. It provides an overview of flight stability, dynamics, general control system block diagram, and the electronic hardware.
A brand new catalog for the 2024 edition of IWISS. We have enriched our product range and have more innovations in electrician tools, plumbing tools, wire rope tools and banding tools. Let's explore together!
OCS Training Institute is pleased to co-operate with
a Global provider of Rig Inspection/Audits,
Commission-ing, Compliance & Acceptance as well as
& Engineering for Offshore Drilling Rigs, to deliver
Drilling Rig Inspec-tion Workshops (RIW) which
teaches the inspection & maintenance procedures
required to ensure equipment integrity. Candidates
learn to implement the relevant standards &
understand industry requirements so that they can
verify the condition of a rig’s equipment & improve
safety, thus reducing the number of accidents and
protecting the asset.
How to Manage Internal Notes in Odoo 17 POSCeline George
In this slide, we'll explore how to leverage internal notes within Odoo 17 POS to enhance communication and streamline operations. Internal notes provide a platform for staff to exchange crucial information regarding orders, customers, or specific tasks, all while remaining invisible to the customer. This fosters improved collaboration and ensures everyone on the team is on the same page.
20CDE09- INFORMATION DESIGN
UNIT I INCEPTION OF INFORMATION DESIGN
Introduction and Definition
History of Information Design
Need of Information Design
Types of Information Design
Identifying audience
Defining the audience and their needs
Inclusivity and Visual impairment
Case study.
Online music portal management system project report.pdfKamal Acharya
The iMMS is a unique application that is synchronizing both user
experience and copyrights while providing services like online music
management, legal downloads, artists’ management. There are several
other applications available in the market that either provides some
specific services or large scale integrated solutions. Our product differs
from the rest in a way that we give more power to the users remaining
within the copyrights circle.
An Internet Protocol address (IP address) is a logical numeric address that is assigned to every single computer, printer, switch, router, tablets, smartphones or any other device that is part of a TCP/IP-based network.
Types of IP address-
Dynamic means "constantly changing “ .dynamic IP addresses aren't more powerful, but they can change.
Static means staying the same. Static. Stand. Stable. Yes, static IP addresses don't change.
Most IP addresses assigned today by Internet Service Providers are dynamic IP addresses. It's more cost effective for the ISP and you.
Software Engineering and Project Management - Introduction to Project ManagementPrakhyath Rai
Introduction to Project Management: Introduction, Project and Importance of Project Management, Contract Management, Activities Covered by Software Project Management, Plans, Methods and Methodologies, some ways of categorizing Software Projects, Stakeholders, Setting Objectives, Business Case, Project Success and Failure, Management and Management Control, Project Management life cycle, Traditional versus Modern Project Management Practices.