This study compares the use of Stark Steel and TMT Steel as reinforcement materials in a two-way reinforced concrete slab. Mechanical testing is conducted to determine the tensile strength, yield strength, and other properties of each material. A two-way slab design adhering to codes and standards is executed with both materials. The performance is analyzed in terms of deflection, stability under loads, and displacement. Cost analyses accounting for material, durability, maintenance, and life cycle costs are also conducted. The findings provide insights into the economic and structural implications of each material for reinforcement selection and recommendations on the most suitable material based on the analysis.
Report
Share
Report
Share
1 of 5
Download to read offline
More Related Content
Similar to A COMPARATIVE ANALYSIS OF RCC ELEMENT OF SLAB WITH STARK STEEL (HYSD STEEL) AND TMT STEEL
Research Paper on Analysis and Design of Steel Truss by using Angle and Tube ...IRJET Journal
This document presents research on analyzing and designing steel roof trusses using angle and tube sections. The researchers analyzed and designed steel roof trusses for an industrial warehouse building using both angle and tube sections. They then calculated the quantity of steel required and compared the results of the two designs to determine the most economical truss section. Their methodology included planning the roof truss, calculating forces, analyzing and designing the trusses using each section type in STAAD PRO software, calculating material quantities, and comparing the results. The goal was to evaluate which section type provides the most effective truss design in terms of weight and cost.
Analysis and Design of Commercial Building using ETABSIRJET Journal
This document summarizes the analysis and design of a G+3 commercial building using ETABS software. Soil testing was conducted on the site and the soil properties were determined. A 3D model of the building was created in ETABS with defined material properties and loads. Structural analysis was performed to determine member forces and deflections. The beams, columns, slab, and footing were then designed according to IS code provisions and reinforced detailing was generated. The results obtained from ETABS were verified through manual calculations. The software was found to save time in analysis and design compared to manual methods.
IRJET- Comparative Study on Analysis and Design of Regular Configuration of B...IRJET Journal
- The document compares the analysis and design of a regular multi-story reinforced concrete building using Staad.Pro and ETABS software.
- It models and analyzes the building in both programs, calculating member forces like shear and bending moments. Results from the two programs are then compared.
- The goal is to determine which software provides a more accurate and economical design while conforming to Indian code standards for structural design and load calculations.
Effect of configuration on lateral displacement and cost of the structure for...eSAT Journals
Abstract
The choice of a cost effective lateral-force-resisting system for high-rise structures is challenging. There is no streamlined methodology to quantitatively compare the cost-effectiveness of each system beyond the more qualitative perception based evaluation of advantages or disadvantages. Developers currently base their decisions on architectural layout and structural integrity. Cost considerations are often primarily based on experience.
This decision making process has three primary shortfalls.
1) It may not incorporate factors which greatly affect the economy of a particular framing system.
2) It may not allow engineers to carryout designs at the least cost.
3) Comparison of framing systems may not address the specific building types.
This investigation proposes a prototype cost-effective model for selecting either a skeleton framing system or skeleton frame with bracing system for steel structural frames. A model for selecting cost-effective skeleton framing system or skeleton frame with bracing system will be a valuable tool for all decision makers. Engineers, in particular, will be able to select optimal steel framing faster, thus reducing design time and iterations. Furthermore, selection of economic framing system will also result in direct cost savings for steel structural frames.
The study involves the design and cost estimation of steel frames representing skeleton framing system and skeleton frame with bracingsystem. The cost effectiveness of the framing systems are compared based on lateral displacement requirements and cost.The preferred framing system should meet lateral displacement requirements and is lower in cost. The results of this pilot study showed that the Skelton framing system with bracing is the cost-effective choice for 30storeys steel space frames at wind speeds of 55m/sec, 50m/sec and 47m/sec.
Keywords: Bracings, SFS (Skeleton framing system), SFWB (Skeleton frame with bracing system) etc…
COMPARITIVE ANALYSIS OF RCC STRUCTURE ON SLOPING GROUND AGAINST SEISMIC LOADI...IRJET Journal
This document analyzes the seismic performance of reinforced concrete structures on sloping ground using fluid viscous dampers, shear walls, and bracings. It models a 10-story building in the software ETABS and analyzes it under response spectrum analysis. The models are compared based on maximum story displacement, drift, and shear. Results show that in the x-direction, the structure with x-bracing performed best in reducing seismic effects compared to the other models that included fluid viscous dampers and shear walls.
A Comparative Study on Analysis of G+8 Commercial Steel Building Using STAAD....IRJET Journal
- The document presents a comparative study analyzing a G+8 commercial steel building using STAAD.Pro and ETABS software.
- The study models the building in both programs and compares results for parameters like horizontal displacements, support reactions, axial forces in columns, shear forces and bending moments in beams.
- The results show some parameters like support reactions and displacements are similar between the programs while others like bending moments and shear forces show more variation. Overall both programs provide effective analysis of the building structure.
Comparative Study of Conventional Steel Structure and Tubular Steel StructureIRJET Journal
This document compares the structural performance of a 13-story steel building designed with conventional steel sections and tubular steel sections. A 3D model of the building was created in STAAD Pro software and analyzed under gravity, wind, and seismic loads. The tubular section design had lower base shear values and story displacements, indicating better performance under lateral loads. It also had 12-15% lower total weight. The study concludes that tubular section designs are more effective at resisting lateral loads and displacements, and provide better overall economy compared to conventional section designs.
1) The document discusses U-Boot technology, which involves casting concrete blocks with hollow spaces that can reduce material consumption and costs in construction.
2) Students conducted a study comparing the compressive and flexural strength of standard concrete blocks to those made with U-Boot technology and fiber-reinforced concrete.
3) Testing found that the U-Boot and fiber-reinforced blocks had significantly higher strength compared to standard blocks, demonstrating the benefits of this technology for construction applications.
Analysis And Design of Pre-Engineered Building Using Indian And Equivalent Am...IRJET Journal
This document summarizes the analysis and design of a pre-engineered building (PEB) using Indian and American design codes. It describes the objectives of studying PEB design using STAAD Pro software. It also reviews literature on PEB design and analysis and identifies a research gap in using different steel section profiles to optimize weight. The methodology section then outlines the PEB design process using STAAD Pro. This includes considering frame geometry, design codes, load calculations, and connection design philosophy to achieve a structurally sound design with minimum weight. Finally, the building input data and load calculations for a sample industrial shed PEB are presented.
Analysis And Design of Pre-Engineered Building Using Indian And Equivalent Am...IRJET Journal
This document summarizes the analysis and design of a pre-engineered building (PEB) using Indian and American design codes. It describes the objectives of studying PEB design using STAAD Pro software. It also reviews literature on PEB design and analysis and identifies a research gap in using different steel section profiles to optimize weight. The methodology section then outlines the PEB design process using STAAD Pro. This includes considering frame geometry, design codes, load calculations, and connection design philosophy to achieve a structurally sound design with minimum weight. Finally, the building input data and load calculations for a sample industrial shed PEB are presented.
Time Period Analysis of Reinforced Concrete Framed BuildingsIRJET Journal
This document presents a study on analyzing the time period of reinforced concrete framed buildings. It aims to develop an expression for estimating the fundamental time period (T) that accounts for various structural parameters beyond just height, such as slab thickness, beam and column dimensions, number of bays, etc. The study involves modeling 3D reinforced concrete frames of buildings with varying parameters in software and performing dynamic analysis to determine their time periods. Results will be used to propose a new equation for T that better captures the influence of different design features on a building's vibration characteristics compared to expressions currently provided in codes.
IRJET- Lateral Stiffness of Framed Structures for Lateral LoadsIRJET Journal
The document discusses methods for calculating the lateral stiffness of framed structures. It begins by noting the importance of evaluating stiffness for seismic design codes. Several approximate methods for calculating storey stiffness are compared, but accurate methods using finite element analysis have been less studied. The study aims to compare different accurate methods for calculating storey stiffness using analytical software models. A 4-storey reinforced concrete frame structure is modeled and different analysis methods are applied to calculate storey stiffnesses, including applying point loads at different locations and calculating drifts. Results will help identify the most accurate and practical method for engineers.
IRJET- Comparative Study of Multi-Storey Multi-Span G+4 Building by PEB and C...IRJET Journal
This document presents a comparative study of the design of a G+4 commercial building using pre-engineered building (PEB) and conventional steel building (CSB) concepts. The building is located in Pune, India and has dimensions of 140m length, 40m width, and 18m eave height. Both designs are analyzed using STAAD Pro software according to Indian design code IS 800-2007. Key findings from the PEB and CSB designs are compared regarding structural configuration, load assumptions, analysis methodology, and design limitations. The PEB concept is found to utilize tapered steel sections tailored to loading requirements, avoiding excess steel. In contrast, the CSB concept uses uniform hot-rolled sections fabricated on
IRJET-Comparative Study on Design Results of a Multi-Storied Building using S...IRJET Journal
This document discusses a comparative study of the design results from STAAD Pro and ETABS software for a regular and irregular multi-story building structure. A G+8 building is modeled and designed in both software programs. The results, including shear forces, bending moments, deflections, and reinforcement details from each software are then compared. The objective is to determine which software provides more accurate design results and to evaluate the advantages and disadvantages of each program.
IRJET- Comparative Study of Outrigger and Diagrid Structural SystemsIRJET Journal
This document compares the structural performance of outrigger and diagrid systems through analyzing models of office buildings with varying heights from 40 to 80 stories. Both systems performed better than conventional moment frames with shear walls in resisting lateral loads. However, the diagrid system performed better in reducing storey drift and top storey deflection. Specifically, for the 80-story model, the diagrid reduced storey drift by 21% and top storey deflection by 51% compared to the outrigger system. Overall, the diagrid structural system was found to be superior in resisting lateral loads and torsion for tall buildings.
Advanced Techniques in Steel Shop Drawings & DetailingMichael William
Gain insights into the implementation of stringent quality control measures for precise and compliant steel shop drawings. Explore the integration of BIM solutions for enhanced coordination and conflict resolution.
IRJET- Analysis & Design of Multi-Story Building using Staad Pro and E-TabsIRJET Journal
1) The document analyzes and designs a 5-story residential building using STAAD PRO and ETABS software. It also performs manual design calculations as per Indian codes.
2) The building is modeled, analyzed for dead, live, wind, and seismic loads according to Indian codes. Beams, columns, slabs, and foundations are designed using software and manually.
3) Results of the analysis such as beam, column, and footing dimensions and reinforcement details are presented. The document concludes that software design reduces time and improves accuracy compared to manual design.
IRJET- Determination of Shear Strength for High Grade ConcreteIRJET Journal
This study aimed to determine the shear strength of high-grade concrete through experimentation. Tests were conducted on L-shaped concrete specimens without reinforcement to derive an equation for predicting shear strength. The preliminary results showed potential for developing empirical equations for high-grade concrete, as code provisions only address normal-strength concrete. Further experiments could generate design equations across a wider range of concrete grades and validate the derived equation against other data. The findings could help simplify design calculations and rationalize shear reinforcement requirements for high-strength concrete beams.
IRJET- Planning, Analyzing and Design of High Rise Building using EtabsIRJET Journal
1) The document discusses planning, analyzing, and designing a 15-story residential building using ETABS software.
2) It describes modeling the building in ETABS, including dimensions of columns, beams, slabs and applying loads like dead, live, and seismic.
3) The analysis involved evaluating bending moments, shear forces, and drift from equivalent static analysis in ETABS to ensure structural integrity under loads.
R.C.C. Framed Structure Design and Analysis Using STAAD ProIRJET Journal
The document discusses the design and analysis of reinforced concrete (R.C.C.) framed structures using STAAD Pro software. It begins with an overview of R.C.C. structures and their importance. It then covers the principles of structural analysis and design and how STAAD Pro automates these processes. The research applies STAAD Pro to design R.C.C. structures by modeling case studies under different loads and optimizing designs. It evaluates STAAD Pro's ability to handle complex engineering challenges and presents insights on improving structural efficiency and sustainable design practices.
Similar to A COMPARATIVE ANALYSIS OF RCC ELEMENT OF SLAB WITH STARK STEEL (HYSD STEEL) AND TMT STEEL (20)
TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...IRJET Journal
1) The document discusses the Sungal Tunnel project in Jammu and Kashmir, India, which is being constructed using the New Austrian Tunneling Method (NATM).
2) NATM involves continuous monitoring during construction to adapt to changing ground conditions, and makes extensive use of shotcrete for temporary tunnel support.
3) The methodology section outlines the systematic geotechnical design process for tunnels according to Austrian guidelines, and describes the various steps of NATM tunnel construction including initial and secondary tunnel support.
STUDY THE EFFECT OF RESPONSE REDUCTION FACTOR ON RC FRAMED STRUCTUREIRJET Journal
This study examines the effect of response reduction factors (R factors) on reinforced concrete (RC) framed structures through nonlinear dynamic analysis. Three RC frame models with varying heights (4, 8, and 12 stories) were analyzed in ETABS software under different R factors ranging from 1 to 5. The results showed that displacement increased as the R factor decreased, indicating less linear behavior for lower R factors. Drift also decreased proportionally with increasing R factors from 1 to 5. Shear forces in the frames decreased with higher R factors. In general, R factors of 3 to 5 produced more satisfactory performance with less displacement and drift. The displacement variations between different building heights were consistent at different R factors. This study evaluated how R factors influence
Effect of Camber and Angles of Attack on Airfoil CharacteristicsIRJET Journal
This document discusses a study analyzing the effect of camber, position of camber, and angle of attack on the aerodynamic characteristics of airfoils. Sixteen modified asymmetric NACA airfoils were analyzed using computational fluid dynamics (CFD) by varying the camber, camber position, and angle of attack. The results showed the relationship between these parameters and the lift coefficient, drag coefficient, and lift to drag ratio. This provides insight into how changes in airfoil geometry impact aerodynamic performance.
A Review on the Progress and Challenges of Aluminum-Based Metal Matrix Compos...IRJET Journal
This document reviews the progress and challenges of aluminum-based metal matrix composites (MMCs), focusing on their fabrication processes and applications. It discusses how various aluminum MMCs have been developed using reinforcements like borides, carbides, oxides, and nitrides to improve mechanical and wear properties. These composites have gained prominence for their lightweight, high-strength and corrosion resistance properties. The document also examines recent advancements in fabrication techniques for aluminum MMCs and their growing applications in industries such as aerospace and automotive. However, it notes that challenges remain around issues like improper mixing of reinforcements and reducing reinforcement agglomeration.
Dynamic Urban Transit Optimization: A Graph Neural Network Approach for Real-...IRJET Journal
This document discusses research on using graph neural networks (GNNs) for dynamic optimization of public transportation networks in real-time. GNNs represent transit networks as graphs with nodes as stops and edges as connections. The GNN model aims to optimize networks using real-time data on vehicle locations, arrival times, and passenger loads. This helps increase mobility, decrease traffic, and improve efficiency. The system continuously trains and infers to adapt to changing transit conditions, providing decision support tools. While research has focused on performance, more work is needed on security, socio-economic impacts, contextual generalization of models, continuous learning approaches, and effective real-time visualization.
Structural Analysis and Design of Multi-Storey Symmetric and Asymmetric Shape...IRJET Journal
This document summarizes a research project that aims to compare the structural performance of conventional slab and grid slab systems in multi-story buildings using ETABS software. The study will analyze both symmetric and asymmetric building models under various loading conditions. Parameters like deflections, moments, shears, and stresses will be examined to evaluate the structural effectiveness of each slab type. The results will provide insights into the comparative behavior of conventional and grid slabs to help engineers and architects select appropriate slab systems based on building layouts and design requirements.
A Review of “Seismic Response of RC Structures Having Plan and Vertical Irreg...IRJET Journal
This document summarizes and reviews a research paper on the seismic response of reinforced concrete (RC) structures with plan and vertical irregularities, with and without infill walls. It discusses how infill walls can improve or reduce the seismic performance of RC buildings, depending on factors like wall layout, height distribution, connection to the frame, and relative stiffness of walls and frames. The reviewed research paper analyzes the behavior of infill walls, effects of vertical irregularities, and seismic performance of high-rise structures under linear static and dynamic analysis. It studies response characteristics like story drift, deflection and shear. The document also provides literature on similar research investigating the effects of infill walls, soft stories, plan irregularities, and different
This document provides a review of machine learning techniques used in Advanced Driver Assistance Systems (ADAS). It begins with an abstract that summarizes key applications of machine learning in ADAS, including object detection, recognition, and decision-making. The introduction discusses the integration of machine learning in ADAS and how it is transforming vehicle safety. The literature review then examines several research papers on topics like lightweight deep learning models for object detection and lane detection models using image processing. It concludes by discussing challenges and opportunities in the field, such as improving algorithm robustness and adaptability.
Long Term Trend Analysis of Precipitation and Temperature for Asosa district,...IRJET Journal
The document analyzes temperature and precipitation trends in Asosa District, Benishangul Gumuz Region, Ethiopia from 1993 to 2022 based on data from the local meteorological station. The results show:
1) The average maximum and minimum annual temperatures have generally decreased over time, with maximum temperatures decreasing by a factor of -0.0341 and minimum by -0.0152.
2) Mann-Kendall tests found the decreasing temperature trends to be statistically significant for annual maximum temperatures but not for annual minimum temperatures.
3) Annual precipitation in Asosa District showed a statistically significant increasing trend.
The conclusions recommend development planners account for rising summer precipitation and declining temperatures in
P.E.B. Framed Structure Design and Analysis Using STAAD ProIRJET Journal
This document discusses the design and analysis of pre-engineered building (PEB) framed structures using STAAD Pro software. It provides an overview of PEBs, including that they are designed off-site with building trusses and beams produced in a factory. STAAD Pro is identified as a key tool for modeling, analyzing, and designing PEBs to ensure their performance and safety under various load scenarios. The document outlines modeling structural parts in STAAD Pro, evaluating structural reactions, assigning loads, and following international design codes and standards. In summary, STAAD Pro is used to design and analyze PEB framed structures to ensure safety and code compliance.
A Review on Innovative Fiber Integration for Enhanced Reinforcement of Concre...IRJET Journal
This document provides a review of research on innovative fiber integration methods for reinforcing concrete structures. It discusses studies that have explored using carbon fiber reinforced polymer (CFRP) composites with recycled plastic aggregates to develop more sustainable strengthening techniques. It also examines using ultra-high performance fiber reinforced concrete to improve shear strength in beams. Additional topics covered include the dynamic responses of FRP-strengthened beams under static and impact loads, and the performance of preloaded CFRP-strengthened fiber reinforced concrete beams. The review highlights the potential of fiber composites to enable more sustainable and resilient construction practices.
Survey Paper on Cloud-Based Secured Healthcare SystemIRJET Journal
This document summarizes a survey on securing patient healthcare data in cloud-based systems. It discusses using technologies like facial recognition, smart cards, and cloud computing combined with strong encryption to securely store patient data. The survey found that healthcare professionals believe digitizing patient records and storing them in a centralized cloud system would improve access during emergencies and enable more efficient care compared to paper-based systems. However, ensuring privacy and security of patient data is paramount as healthcare incorporates these digital technologies.
Review on studies and research on widening of existing concrete bridgesIRJET Journal
This document summarizes several studies that have been conducted on widening existing concrete bridges. It describes a study from China that examined load distribution factors for a bridge widened with composite steel-concrete girders. It also outlines challenges and solutions for widening a bridge in the UAE, including replacing bearings and stitching the new and existing structures. Additionally, it discusses two bridge widening projects in New Zealand that involved adding precast beams and stitching to connect structures. Finally, safety measures and challenges for strengthening a historic bridge in Switzerland under live traffic are presented.
React based fullstack edtech web applicationIRJET Journal
The document describes the architecture of an educational technology web application built using the MERN stack. It discusses the frontend developed with ReactJS, backend with NodeJS and ExpressJS, and MongoDB database. The frontend provides dynamic user interfaces, while the backend offers APIs for authentication, course management, and other functions. MongoDB enables flexible data storage. The architecture aims to provide a scalable, responsive platform for online learning.
A Comprehensive Review of Integrating IoT and Blockchain Technologies in the ...IRJET Journal
This paper proposes integrating Internet of Things (IoT) and blockchain technologies to help implement objectives of India's National Education Policy (NEP) in the education sector. The paper discusses how blockchain could be used for secure student data management, credential verification, and decentralized learning platforms. IoT devices could create smart classrooms, automate attendance tracking, and enable real-time monitoring. Blockchain would ensure integrity of exam processes and resource allocation, while smart contracts automate agreements. The paper argues this integration has potential to revolutionize education by making it more secure, transparent and efficient, in alignment with NEP goals. However, challenges like infrastructure needs, data privacy, and collaborative efforts are also discussed.
A REVIEW ON THE PERFORMANCE OF COCONUT FIBRE REINFORCED CONCRETE.IRJET Journal
This document provides a review of research on the performance of coconut fibre reinforced concrete. It summarizes several studies that tested different volume fractions and lengths of coconut fibres in concrete mixtures with varying compressive strengths. The studies found that coconut fibre improved properties like tensile strength, toughness, crack resistance, and spalling resistance compared to plain concrete. Volume fractions of 2-5% and fibre lengths of 20-50mm produced the best results. The document concludes that using a 4-5% volume fraction of coconut fibres 30-40mm in length with M30-M60 grade concrete would provide benefits based on previous research.
Optimizing Business Management Process Workflows: The Dynamic Influence of Mi...IRJET Journal
The document discusses optimizing business management processes through automation using Microsoft Power Automate and artificial intelligence. It provides an overview of Power Automate's key components and features for automating workflows across various apps and services. The document then presents several scenarios applying automation solutions to common business processes like data entry, monitoring, HR, finance, customer support, and more. It estimates the potential time and cost savings from implementing automation for each scenario. Finally, the conclusion emphasizes the transformative impact of AI and automation tools on business processes and the need for ongoing optimization.
Multistoried and Multi Bay Steel Building Frame by using Seismic DesignIRJET Journal
The document describes the seismic design of a G+5 steel building frame located in Roorkee, India according to Indian codes IS 1893-2002 and IS 800. The frame was analyzed using the equivalent static load method and response spectrum method, and its response in terms of displacements and shear forces were compared. Based on the analysis, the frame was designed as a seismic-resistant steel structure according to IS 800:2007. The software STAAD Pro was used for the analysis and design.
Cost Optimization of Construction Using Plastic Waste as a Sustainable Constr...IRJET Journal
This research paper explores using plastic waste as a sustainable and cost-effective construction material. The study focuses on manufacturing pavers and bricks using recycled plastic and partially replacing concrete with plastic alternatives. Initial results found that pavers and bricks made from recycled plastic demonstrate comparable strength and durability to traditional materials while providing environmental and cost benefits. Additionally, preliminary research indicates incorporating plastic waste as a partial concrete replacement significantly reduces construction costs without compromising structural integrity. The outcomes suggest adopting plastic waste in construction can address plastic pollution while optimizing costs, promoting more sustainable building practices.
Solving Linear Differential Equations with Constant CoefficientsIRJET Journal
1) The document discusses methods for finding the solutions to linear differential equations with constant coefficients. It defines such an equation and explains that the complete solution is the combination of the complementary function (C.F.) and particular integral (P.I.).
2) Various methods are presented for determining the C.F. depending on whether the roots of the auxiliary equation are real, imaginary, repeated, etc.
3) Rules are provided for obtaining the P.I. based on the type of function involved (exponential, trigonometric, power, etc.). Examples are worked through to demonstrate the full solution process.
OCS Training Institute is pleased to co-operate with
a Global provider of Rig Inspection/Audits,
Commission-ing, Compliance & Acceptance as well as
& Engineering for Offshore Drilling Rigs, to deliver
Drilling Rig Inspec-tion Workshops (RIW) which
teaches the inspection & maintenance procedures
required to ensure equipment integrity. Candidates
learn to implement the relevant standards &
understand industry requirements so that they can
verify the condition of a rig’s equipment & improve
safety, thus reducing the number of accidents and
protecting the asset.
Natural Is The Best: Model-Agnostic Code Simplification for Pre-trained Large...YanKing2
Pre-trained Large Language Models (LLM) have achieved remarkable successes in several domains. However, code-oriented LLMs are often heavy in computational complexity, and quadratically with the length of the input code sequence. Toward simplifying the input program of an LLM, the state-of-the-art approach has the strategies to filter the input code tokens based on the attention scores given by the LLM. The decision to simplify the input program should not rely on the attention patterns of an LLM, as these patterns are influenced by both the model architecture and the pre-training dataset. Since the model and dataset are part of the solution domain, not the problem domain where the input program belongs, the outcome may differ when the model is trained on a different dataset. We propose SlimCode, a model-agnostic code simplification solution for LLMs that depends on the nature of input code tokens. As an empirical study on the LLMs including CodeBERT, CodeT5, and GPT-4 for two main tasks: code search and summarization. We reported that 1) the reduction ratio of code has a linear-like relation with the saving ratio on training time, 2) the impact of categorized tokens on code simplification can vary significantly, 3) the impact of categorized tokens on code simplification is task-specific but model-agnostic, and 4) the above findings hold for the paradigm–prompt engineering and interactive in-context learning and this study can save reduce the cost of invoking GPT-4 by 24%per API query. Importantly, SlimCode simplifies the input code with its greedy strategy and can obtain at most 133 times faster than the state-of-the-art technique with a significant improvement. This paper calls for a new direction on code-based, model-agnostic code simplification solutions to further empower LLMs.
Unblocking The Main Thread - Solving ANRs and Frozen FramesSinan KOZAK
In the realm of Android development, the main thread is our stage, but too often, it becomes a battleground where performance issues arise, leading to ANRS, frozen frames, and sluggish Uls. As we strive for excellence in user experience, understanding and optimizing the main thread becomes essential to prevent these common perforrmance bottlenecks. We have strategies and best practices for keeping the main thread uncluttered. We'll examine the root causes of performance issues and techniques for monitoring and improving main thread health as wel as app performance. In this talk, participants will walk away with practical knowledge on enhancing app performance by mastering the main thread. We'll share proven approaches to eliminate real-life ANRS and frozen frames to build apps that deliver butter smooth experience.
How to Manage Internal Notes in Odoo 17 POSCeline George
In this slide, we'll explore how to leverage internal notes within Odoo 17 POS to enhance communication and streamline operations. Internal notes provide a platform for staff to exchange crucial information regarding orders, customers, or specific tasks, all while remaining invisible to the customer. This fosters improved collaboration and ensures everyone on the team is on the same page.
Profiling of Cafe Business in Talavera, Nueva Ecija: A Basis for Development ...IJAEMSJORNAL
This study aimed to profile the coffee shops in Talavera, Nueva Ecija, to develop a standardized checklist for aspiring entrepreneurs. The researchers surveyed 10 coffee shop owners in the municipality of Talavera. Through surveys, the researchers delved into the Owner's Demographic, Business details, Financial Requirements, and other requirements needed to consider starting up a coffee shop. Furthermore, through accurate analysis, the data obtained from the coffee shop owners are arranged to derive key insights. By analyzing this data, the study identifies best practices associated with start-up coffee shops’ profitability in Talavera. These findings were translated into a standardized checklist outlining essential procedures including the lists of equipment needed, financial requirements, and the Traditional and Social Media Marketing techniques. This standardized checklist served as a valuable tool for aspiring and existing coffee shop owners in Talavera, streamlining operations, ensuring consistency, and contributing to business success.
20CDE09- INFORMATION DESIGN
UNIT I INCEPTION OF INFORMATION DESIGN
Introduction and Definition
History of Information Design
Need of Information Design
Types of Information Design
Identifying audience
Defining the audience and their needs
Inclusivity and Visual impairment
Case study.
A vernier caliper is a precision instrument used to measure dimensions with high accuracy. It can measure internal and external dimensions, as well as depths.
Here is a detailed description of its parts and how to use it.
Exploring Deep Learning Models for Image Recognition: A Comparative Reviewsipij
Image recognition, which comes under Artificial Intelligence (AI) is a critical aspect of computer vision,
enabling computers or other computing devices to identify and categorize objects within images. Among
numerous fields of life, food processing is an important area, in which image processing plays a vital role,
both for producers and consumers. This study focuses on the binary classification of strawberries, where
images are sorted into one of two categories. We Utilized a dataset of strawberry images for this study; we
aim to determine the effectiveness of different models in identifying whether an image contains
strawberries. This research has practical applications in fields such as agriculture and quality control. We
compared various popular deep learning models, including MobileNetV2, Convolutional Neural Networks
(CNN), and DenseNet121, for binary classification of strawberry images. The accuracy achieved by
MobileNetV2 is 96.7%, CNN is 99.8%, and DenseNet121 is 93.6%. Through rigorous testing and analysis,
our results demonstrate that CNN outperforms the other models in this task. In the future, the deep
learning models can be evaluated on a richer and larger number of images (datasets) for better/improved
results.