Questions tagged [extraction]
For questions regarding the separation process consisting in the separation of a substance from a matrix. This tag can be used for generic extraction of elements from ore or more specific types of extraction such as: liquid-liquid extraction, and solid phase extraction.
199
questions
0
votes
0
answers
30
views
How does a conc. electrolyte solution extract water from a organic phase like diethyl ether or ethyl acetate?
In organic chemistry, often, during the last steps of a workup we use concentrated brine solution (NaCl) to "extract" the water from the organic layer, especially when we have an organic ...
3
votes
0
answers
48
views
TsOH and 5% NaHCO3 Interaction: Unexpected Dark Green Color
Here's the brief:
I synthesized alkyl gallates (ethyl gallate, butyl gallate, and amyl gallate) using Fischer esterification.
I used TsOH instead of concentrated H2SO4 as the catalyst.
After ...
1
vote
0
answers
68
views
Can I make an alcohol-based stain from a pigment with an alkaline extraction process?
I'm in a situation where I don't really even know enough to know if what I want makes sense or has the kinds of problems that I think it might have, but here's the situation:
I would like to make a ...
0
votes
1
answer
88
views
How feasible is it to separate acetone, butanol, and ethanol (and water) via simple distillation?
I have no experience distilling, though I understand the basics about it. When two liquids with different boiling points are mixed, you can sometimes separate them by boiling away one of the liquids, ...
-2
votes
2
answers
67
views
Liquid-liquid extraction of sorbicillinol in water with ethyl acetate
My solution consisted of sorbicillinol and water, sorbicillinol being a polar substance. I wanted to isolate sorbicillinol from water using liquid-liquid extraction.
For my solvent I used ethyl ...
6
votes
0
answers
171
views
Which xylenes, if any, are immiscible with DMSO?
"Xylene" is reported to be immiscible with dimethyl sulfoxide (DMSO), according to a few solvent miscibility tables found online (chart 1, chart 2, chart 3). I have tried to locate some ...
2
votes
0
answers
107
views
Reduction of gingerol content in ginger using kitchen equipment
The single topic that this question focuses on is - how to remove gingerol and only gingerol from a piece of ginger in a manner that it remains safe to eat using equipment found in a well stocked ...
0
votes
1
answer
550
views
Decarboxylation of THCA in cannabis after plant material is mixed with ethanol [closed]
When making a tincture of cannabis, an early step is decarboxylation by roasting cannabis flowers at low temperatures (such as 230F for 30 minutes). My question is, how can one decarboxylate cannabis ...
1
vote
0
answers
68
views
Chemistry of a proposed Capsaicin extract [closed]
Background:
I’d like to make an extract of capsaicin using the following ingredients: Capsicum powder, Fractionated coconut MCT oil, apple cider vinegar, and saline. The idea is for the capsaicin to ...
3
votes
0
answers
457
views
Why does emulsions hinder the full extraction of a substance?
I've learend that in processing liquid-liquid extractions, emulsions can appear between two immiscible solvents.
For exmaple, to extract caffeine from green tea leaves;
The caffeine in water can be ...
1
vote
0
answers
69
views
How to theoretically determine if a hydrate of a salt precipitates out of solution
In a solid-liquid extraction simulation process, there are multiple salts that precipitate in the solution. But how do I determine if these salts are hydrates or not? To give an example:
$$\ce{Ca3(PO4)...
-2
votes
2
answers
289
views
What is the reason for extracting copper from copper pyrites and not iron?
Why can copper be extracted from copper pyrites ($\ce{CuFeS2}$) but not iron? Is there some intuitive logic behind it?
2
votes
0
answers
65
views
What chemical mechanisms or parameters altered during the usage of buffered extractant for leachability of a soil or sediment?
Toxicity characteristic leaching procedure (TCLP) is an extraction method to simulate a soil or sediment leaching. The method employed two extraction fluids - one is a buffered
solution of acetic acid ...
-2
votes
1
answer
109
views
Performing the mean and standard deviation for a extraction based on averaged content determination
Is it okay to perform the mean and standard deviation for a triplicate extraction based on averaged values of content determination?
I performed an extraction in triplicate. Each one of the ...
3
votes
2
answers
121
views
Can I expect the same (or very close) peak areas from herbal extracts prepared with the same plant/solvent ratio?
I prepared an extract by using 100 mg of plant and 2 mL of ethanol, filtered and injected 20 μl into the HPLC system equipped with Waters® XSelect (150 mm × 4.6 mm, 5 μm) column. If I prepare an ...
1
vote
0
answers
105
views
How does pH affect an extraction problem
I am not sure how to understand when pH will affect a given problem regarding extraction. For example, in a problem given that K$_D$ of the reaction is $1.86$ I am asked to calculate:
(a) How much ...
0
votes
0
answers
107
views
Selective Removal of Sodium Acetate
I am currently working on an extraction and synthesis of sodium salicyate from acetylsalicylic acid and sodium hydroxide. After doing a liquid-liquid extraction from DCM, using a sodium hydroxide ...
0
votes
1
answer
155
views
How to remove graphite substrate of boron carbide coating?
I have a boron carbide coating (the thickness is either 90 microns or 220 microns) on a graphite substrate (the thickness is 0.5 inch - about 13 mm, the other dimensions are 2x2 inch$^2$ - about 5x5 ...
3
votes
1
answer
310
views
Cannabigerolic acid (CBGA) and cannabidiolic acid (CBDA): Solubility in ethanol
How much CBGA and CBDA can be dissolved in a given amount of ethanol at room temperature? I did a bit of research but could not find any source on solubility of these substances in ethanol.
For ...
2
votes
1
answer
160
views
What are the hydrodynamics behind a Soxhlet extractor?
So I'm trying to wrap my head around the physics of how a Soxhlet extractor works, not the chemical, solvent and chemical components part, but rather the physical, hydrodynamic, siphoning part : why ...
1
vote
0
answers
55
views
BTX nitration work-up
I'm trying to understand washing step in a btx nitration process. In all these processes the work-up streams are very similar. The reaction mixture passes from the nitrator to a separator or ...
1
vote
1
answer
125
views
Natural Sources for S-(-)-Limonene?
I'm interested in developing an undergrad organic lab that delves deeper into distillation/extraction, optical rotation and enantiomers. Our lab currently does a steam distillation extracting R-(+)-...
1
vote
2
answers
1k
views
Extraction of copper from chalcopyrite
During the extraction of copper from chalcopyrite ore, the ore ($\ce{Cu2S.Fe2S3}$) is heated to form $\ce{Cu2S}$ and $\ce{FeS}$. Then during smelting it reacts with $\ce{O2}$ to form $\ce{Cu2O}$.
Then ...
0
votes
0
answers
227
views
Can I dissolve IBA from talc powder?
My container of in total 25 grams of rooting powder contains 2.5 mg IBA (Indole-3-butyric acid), which is mixed with talc powder and a tiny bit of chromium(III)oxide. I know talc is not soluble in ...
0
votes
2
answers
102
views
Why is oil solubility improved in solvents at higher temperatures?
This is in the case of extracting plant oil using a solvent extraction method for the purposes of biodiesel production.
In a paper, it is stated that increased oil yield may be due to the 'increase in ...
3
votes
2
answers
1k
views
How do you achieve phase separation of a methanol / chloroform solution?
If I'm washing a methanol solution with chloroform, can I just add water in a 1:1 mixture with the methanol and expect it to break? Do I need to do anything else to cause the aqueous phase to separate ...
3
votes
0
answers
45
views
In solvent extraction from plant cells, what is the static organic solvent film formed?
I am researching the mechanisms behind solvent extraction of oil from microalgal cells, and it is stated in one paper that in the process of transferring the lipid out of the cell, the solvent-lipid ...
8
votes
2
answers
1k
views
Looking for caffeine partition coefficients
As part of a project, I'm looking to carry out a liquid-liquid extraction of caffeine from an aqueous phase to an organic phase, using dichloromethane or ethyl acetate.
So I'm looking for the ...
3
votes
1
answer
728
views
How to selectively adsorb caffeine on activated carbon filter?
As part of a project on decaffeination methods, I'm looking to see how activated carbon filters can selectively adsorb caffeine in tea and coffee solutions, and avoid adsorbing other taste-giving ...
6
votes
3
answers
981
views
Condenser shooting out hexane in a soxhlet extraction
Im running a soxhlet extraction using hexane as the solvent. Once the hexane has filled up the soxhlet, a considerable amount of hexane will come out on top of the condenser. Is this an issue with ...