Skip to main content

Questions tagged [equilibrium]

The state in which both reactants and products are present at concentrations which have no further tendency to change with time.

0 votes
1 answer
64 views

Mass conservation in chemical equilibria

Please help me understand this, it's really confusing me! So suppose we have an equilibrium $\ce{A <=> B}$, and that we have initial masses $m_{\text{A}}$ and $m_{\text{B}}$ of the substances. ...
4 votes
2 answers
173 views

How do you use entropy and enthalpy to explain how chemical reactions come to equilibrium?

Let's say I have a reversible chemical reaction between A and B that will come to equilibrium in a closed system. How do I use the concepts of enthalpy, entropy and naturally then, Gibbs free energy, ...
9 votes
2 answers
959 views

Numerically solving chemical equilibrium equations

Here are chemical equilibrium equations: $\begin{cases} \mathbf{N}^\text{T}\mathbf{X}+\mathbf{C}=\mathbf{Y}\\ \mathbf{N}\ln\mathbf{Y}=\ln\mathbf{K} \end{cases}$ Here $\mathbf{C}=\begin{pmatrix}c_1\\...
1 vote
0 answers
41 views

How to calculate the pH of a mixture of an acid with a buffered solution?

Being a physicist by training, having worked in software development for the last 10 years. Having heard my last chemistry lecture 15 years a go I am a bit lost in regards to how one can calculate the ...
-1 votes
0 answers
32 views

Algebraic method for modelling sodium acetate in solution

For a solution of sodium acetate ($NaA$), I want to find the concentrations of $H^+$, $OH^-$, $HA$ and $A^-$ via the algebraic method, being the total concentration of $NaA$ $C_A=0.25~\text{M}$, the ...
-1 votes
2 answers
99 views

How can adding a strong base to a weak base be the same as a strong base in solution problem?

In professor's lecture on acid-base titration, professor says (at this point of the video, link should start about the time she says it) "adding a strong base to a weak base should be treated as ...
1 vote
0 answers
32 views

Iodine/iodide electrochemistry help

I have an electrochemistry experiment with iodine in solution. I am initially wanting to quantify the iodide in solution and extrapolate the concentration of I2(aq) and I3-(aq) in solution from this ...
0 votes
1 answer
126 views

How does cell potential change with temperature for positive enthalpy and negative entropy?

A recent United States National Chemistry Olympiad question asked: A certain voltaic cell has a standard cell potential that increases with increasing temperature. Which best explains this ...
4 votes
1 answer
91 views

Derivation of Gibbs phase rule

I learnt about the Gibbs phase rule a while back but did not really think too much about how it was derived. I am now currently looking back at the derivation provided in the textbook and I realised ...
3 votes
1 answer
165 views

pKa of acetic acid in pure NH3?

Acetic acid completely dissociates in liquid ammonia and I would like to know the $\mathrm{p}K_\mathrm{a}$ value for the acid in that solvent. Can anybody point me to a reference?
1 vote
1 answer
4k views

Why do fluoride ions "win" over thiocyanate ions in a solution with iron ions?

When you mix aqueous iron(III) nitrate and potassium thiocyanate together you get a red solution. Then if you add sodium fluoride, the red colour disappears. This is basically because the $\ce{Fe(...
0 votes
0 answers
25 views

Bicarbonate concentration in the RO permeate

I am facing a challenge since long ago, but have not been able to find a suitable solution for it. Please share your thoughts if you have the knowledge or experience in this area. I am running an RO ...
2 votes
0 answers
78 views

Does copper(II) hydroxide dissolve in ammonia solution?

According to University of Oregon — Chemistry Interactive Demonstrations and Educational Resources — Copper-Ammonia Complex, the equilibrium constant for the formation of copper(II) hydroxide is ...
1 vote
0 answers
46 views

Drug dosage determination using dynamical systems

I am a Mathematical Biology student, and recently I have read about various approaches, such as Ordinary Differential Equations (ODEs), used to determine the exact drug dosage and treatment sessions ...
-4 votes
1 answer
74 views

What is the reason behind atoms/molecules in reversible reactions reverting back to its reactant state even if they have found stability? [closed]

If atoms and molecules aim for stability and equilibrium, then why do they feel the need to revert back into their original state once they have already found stability? Example: $\ce{I2 + H2 \to 2HI}$...
0 votes
0 answers
74 views

If a pocket of nitrogen gas is pumped in at the bottom intake of a padded tank will the pocket of gas bubble up?

I have a nitrogen gas padded tank (tank 1) which is filled from the bottom of the tank. Tank has a set point of 30 psi which adjusted as tank level changes. Also at the inlet is an additional pipe ...
0 votes
2 answers
628 views

Effect of Pressure on Equilibrium

This might be a little bit of a basic question, but I've been trying to get my head around pressure and Le Chatelier's principle and I can't quite understand it. Currently, my understanding of Le ...
0 votes
1 answer
475 views

Why does balancing the reduction of dichromate(VI) to chromium(III) require four water molecules among the products?

Problem Balance the following chemical equation using oxidation numbers: $$\ce{Cr2O7^2–(aq) + HNO2(aq) –> Cr^3+(aq) + NO3–(aq)}$$ Solution (in Swedish) $$\ce{\overset{+VI}{Cr}_2O7^2–(aq) + H\...
-2 votes
1 answer
78 views

How is dG=0 employed to describe equilibrium in constant volume systems?

GIBBS ENERGY Here's the derivation of how dG=0 describes equilibrium state: $$\Delta S_{\text{system}} + \Delta S_{\text{surrounding}} > 0$$ $\implies\Delta S_{\text{system}} + \frac{-Q}{T_{\text{...
3 votes
1 answer
56 views

Iminium formation rate between formaldehyde and secondary amine

Given the significantly more favored hydrate of formaldehyde in the presence of water under neutral conditions, can we say that this is the slow step in iminium formation? Would removing water/working ...
0 votes
0 answers
34 views

Meaning of letter K in chemistry conventions [duplicate]

The letter "K" is usually used as chemistry (or statistics/ physics) conventions, take the equilibrium constant (Kc) and rate constant (k) as two prime examples. Are there any reasons why &...
-1 votes
1 answer
43 views

Is the reaction product favoured in this equilibrium: H2(g)+I2(s)><2HI(g) when K=45? [closed]

Is the reaction product favoured in this equilibrium: H2(g)+I2(s)><2HI(g) when K=45? or is the reaction reactant favoured? because I remember that if K>1 then the product is favoured. I am ...
19 votes
2 answers
30k views

Is there a difference between equilibrium and steady state?

The term equilibrium is used in the context of reversible reactions that reach a point where concentrations no longer change. The term steady-state is used in enzyme kinetics when the concentration of ...
3 votes
1 answer
65 views

How can a Michaelis–Menten formalism be used when enzyme concentration isn't constant?

I understand that $V_\mathrm{max} = k_3[\ce{E}]_0$ in ordinary Michaelis–Menten (MM) kinetics. According to the lecture notes provided by my university (I don't believe they are available online), ...
5 votes
4 answers
444 views

Will the total equilibrium pressure increase in gas phase reaction PCl5(g) ⇌ PCl3(g) + Cl2(g) after chlorine is removed?

Will the total pressure be greater than the initial equilibrium pressure if all $\ce{Cl2}$ is removed and the following reaction is allowed to re-equilibrate? $$\ce{PCl5(g) <=> PCl3(g) + Cl2(g)}$...
1 vote
2 answers
300 views

Increase in equilibrium concentration of the reactant via decrease in container volume

Consider the hypothetical reaction $\ce{3A(g) -> B(g) + C(g)}$; how to increase the equilibrium concentration of $\ce{A}$, given that the reaction is endothermic? increasing the volume of ...
1 vote
2 answers
2k views

Single electrode potential measurement

My textbook says that in a galvanic cell, it's not possible to measure single electrode potential independently. Instead, a Standard Hydrogen Electrode is used as the system is under equilibrium. Can ...
1 vote
1 answer
50 views

Resolve inconsistency regarding percentage of ionized water molecules in the auto-ionization of water

I am relearning some chemistry in order to understand pH for a particular application. My last encounter with the subject was in high school several decades ago. I have the following question: I read (...
3 votes
1 answer
113 views

Effect of Pressure on the Position of Equilibrium

The following general reaction proceeds with decrease in amount of substance, so increasing pressure should shift the position of equilibrium to the right. $$\ce{2 A(g) <=> B(g)}$$ But let's say ...
-1 votes
1 answer
76 views

Considering Le Chatelier's principle, what happens when you add more solute to a saturated solution already in equilibrium?

If I'm not wrong saturated solutions are in dynamic equilibrium. Will the addition of solute disturb the equilibrium? What exactly occurs and how to apply Le Chatelier's principle?

15 30 50 per page
1
2 3 4 5
58