This document summarizes and analyzes various fault tolerance mechanisms for wireless sensor networks. It discusses mobile agent mechanisms, relay node mechanisms, and handover mechanisms. The document analyzes several existing fault tolerance methods, including Bayesian network models, probabilistic combinatorial optimization, dynamic power level adjustment, and integrated fault tolerance frameworks. Overall, the document provides an overview of important fault tolerance issues in wireless sensor networks and different approaches that have been proposed to address faults and improve reliability.
Basic Architecture of Wireless Sensor NetworkKarthik
The document discusses software architecture design considerations for wireless sensor networks. It examines four key characteristics of wireless sensor networks that impact software architecture: self-organization, cooperative processing, energy efficiency, and modularity. It then describes common components of service-oriented wireless sensor network architectures, including sensor applications, node applications, network applications, and middleware. Finally, it analyzes two proposed software architectures and how they address the requirements of wireless sensor networks.
EFFECTIVE AND SECURE DATA COMMUNICATION IN WSNs CONSIDERING TRANSFER MODULE O...IJEEE
A Bio-inspired clustering algorithm based on BFO has been proposed and investigation on energy efficient clustering algorithms related to WSNs has been done in this paper. The contribution of this paper related to use of Bacteria foraging algorithm firstly for WSNs for enhancing network lifetime of sensor nodes.
A Fault Tolerant Approach To Enhances WSN Lifetime In Star TopologyIRJET Journal
This document summarizes a research paper that proposes a fault-tolerant approach to increase the lifetime of wireless sensor networks using a star topology. It applies a Gradient Diffusion algorithm and Fault Node Recovery algorithm to identify and replace non-functioning sensor nodes. The Fault Node Recovery algorithm uses a genetic algorithm to determine the sequence of non-operating nodes and parameter thresholds. Simulation results showed the approach could increase the number of active nodes by 8-9 times, reduce data loss by up to 98%, and lower energy consumption by around 32%.
DATA TRANSMISSION IN WIRELESS SENSOR NETWORKS FOR EFFECTIVE AND SECURE COMMUN...IJEEE
Data transmission occurs from transmitting node to sink node, which communicate each other via large number of intermediate nodes or directly to an external base station. A network consists of numbers of nodes with one as a source and one or more as a destination node.
Transport layer protocol for urgent data transmission in wsneSAT Journals
Abstract wireless sensor networks is a growing class of highly dynamic, complex network environment on top of which a wide range of applications, such as habitat monitoring, object tracking, precision agriculture, building monitoring and military systems are built. The real time applications often generate urgent data and one-time event notifications that need to be communicated reliably. The successful delivery of such information has a direct effect on the overall performance of the system. Reliable communication is important for sensor networks. Urgent data transmission has been a serious problem for Wireless sensor networks. WSN face difficulties in handling urgent data like congestion and reliability due to their unique requirements and constraints. Various protocols for congestion avoidance and reliability achievement for WSN have been proposed recently. Few of them have also worked on congestion elimination. These protocols try to minimize the problem using different mechanism. This paper explores these mechanisms and tries to find their features and limitations which directed us for our research. Keywords: Congestion, Reliability, Transport layer Protocol, Urgent data transmission, Wireless Sensor Network.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
This document presents an introduction to a thesis that compares the performance of routing protocols in wireless sensor networks. It provides background on wireless sensor networks and discusses routing as an important issue. The introduction defines the problem, motivation, research questions, methodology, aims, assumptions, contributions, and organization of the thesis. It includes figures to illustrate typical wireless sensor network components, different network topologies, deployment densities, and a bar chart on simulation pause time.
Secured node detection technique based on artificial neural network for wirel...IJECEIAES
The wireless sensor network is becoming the most popular network in the last recent years as it can measure the environmental conditions and send them to process purposes. Many vital challenges face the deployment of WSNs such as energy consumption and security issues. Various attacks could be subjects against WSNs and cause damage either in the stability of communication or in the destruction of the sensitive data. Thus, the demands of intrusion detection-based energy-efficient techniques rise dramatically as the network deployment becomes vast and complicated. Qualnet simulation is used to measure the performance of the networks. This paper aims to optimize the energy-based intrusion detection technique using the artificial neural network by using MATLAB Simulink. The results show how the optimized method based on the biological nervous systems improves intrusion detection in WSN. In addition to that, the unsecured nodes are affected the network performance negatively and trouble its behavior. The regress analysis for both methods detects the variations when all nodes are secured and when some are unsecured. Thus, Node detection based on packet delivery ratio and energy consumption could efficiently be implemented in an artificial neural network.
A SURVEY OF ENERGY-EFFICIENT COMMUNICATION PROTOCOLS IN WSNIAEME Publication
Wireless sensor networks are harshly restricted by storage capacity, energy and computing power. Wireless Sensor Networks have acquired a lot of attention by research community, manufacturer as well as actual users for monitoring remote trades and how to gather data in different environment. The wireless sensor nodes are especially battery powered devices having life can be extended for some times while long lasting and reliable for maintaining consumption of energy and network lifetime while designs applications and protocols. So it is essential to design effective and energy efficient protocol in order to enhance the network lifetime. In this paper we present the study of different energy efficient communication protocols of Wireless Sensor Networks (WSNs).Then some of the communication protocols which are widely used in WSNs to improve network performance are also discussed advantages and disadvantages of each protocols.
This document provides an overview of wireless sensor network software architecture. It discusses the key components of WSNs including sensing units, processing units, power suppliers, and communication devices. It then examines various topics related to WSN software architecture, including network topologies, the IEEE 1451 standard for smart sensors, software architecture components like operating systems and middleware, services in sensor networks, and research challenges around security. The goal is to provide a reliable software architecture for WSNs to enable better performance and functionality.
IRJET- Energy Efficient Secure Communication in Wireless Sensor Networks: A S...IRJET Journal
This document summarizes research on improving energy efficiency and security in wireless sensor networks (WSNs). It discusses how WSNs have limitations like limited battery power, bandwidth, and storage in sensor nodes. Several energy efficient techniques and secure communication methods are described that aim to extend the lifetime of WSNs. This includes clustering protocols to select energy-efficient cluster heads, optimized multi-hop transmission to reduce energy consumption, and integrating routing and MAC protocols using techniques like honey bee optimization to further improve energy efficiency and security of data transmission in WSNs. The goal of these approaches is to minimize energy usage and maximize the reliable operation of resource-constrained WSNs.
IRJET- An Introduction to Wireless Sensor Networks, its Challenges and SecurityIRJET Journal
- Wireless sensor networks (WSNs) are composed of small, battery-powered sensor nodes that collect data from the environment and transmit it to each other and a base station. They face challenges related to node mobility, energy efficiency, and lifetime.
- The document discusses clustering in WSNs, which involves organizing nodes into clusters with cluster heads to improve stability and reduce energy consumption. It also covers security issues and applications of WSNs in various fields like healthcare, the environment, and more.
Real-Time, Fault Tolerance and Energy-Efficiency (REFER) Enhancement in Wirel...IRJET Journal
This document discusses enhancing real-time capabilities, fault tolerance, and energy efficiency in wireless sensor and actuator networks (WSANs). It proposes a new network architecture called REFER that embeds Kautz graphs for routing to provide these enhancements. REFER connects the Kautz graphs using a distributed hash table for scalability. It also develops an efficient fault-tolerant routing protocol that allows nodes to quickly identify alternate paths upon failures based on node IDs alone, without retransmission from the source. The document reviews related work on WSAN routing and discusses fault diagnosis and recovery techniques. It presents the methodology and simulation results demonstrating REFER's improvements over existing WSAN systems in real-time communication, energy efficiency, fault tolerance and scalability
The popularity of Wireless Sensor Networks (WSN) have increased rapidly and tremendously due to the vast potential of the sensor networks to connect the physical world with the virtual world. Since sensor devices rely on battery power and node energy and may be placed in hostile environments, so replacing them becomes a difficult task. Thus, improving the energy of these networks i.e. network lifetime becomes important. The thesis provides methods for clustering and cluster head selection to WSN to improve energy efficiency using fuzzy logic controller. It presents a comparison between the different methods on the basis of the network lifetime. It compares existing ABC optimization method with BFO algorithm for different size of networks and different scenario. It provides cluster head selection method with good performance and reduced computational complexity. In addition it also proposes BFO as an algorithm for clustering of WSN which would result in improved performance with faster convergence.
This document presents a virtual grid-based dynamic routes adjustment (VGDRA) scheme for wireless sensor networks with a mobile sink. The scheme aims to minimize the energy consumed when sensor nodes adjust their routes to the sink's new location. It divides the sensor field into a virtual grid with cell headers. When the sink moves, only the cell headers participate in rerouting to the new location, reducing the communication cost compared to all nodes adjusting routes. The VGDRA scheme maintains nearly optimal routes to the mobile sink while minimizing the cost of route reconstruction as the sink moves.
Mobile Ad hoc Network is basically a crew of mobile traffic nodes, which figure an effectual dynamic topology and built a resource mannered network. Mobile Ad hoc Networks are exceptional cases of ad hoc networks that, but it is lacking infrastructure, communicating entities pass with various accelerations. For that reason, this impedes or delay lays the foundation of well built end-to-end communication paths. So Mobile Ad-hoc Network having efficient data transfer. In this manner, MANETs have out of the common network concerns and security challenges to get the advanced connectivity, immune communications, and reputation executives systems which have an impact on the trust in cooperation and settlement between mobile networking units. In this survey paper we confer about the security attributes, attacks, and challenges of MANETs.So, it is important to have a better and good formation algorithm to connect all the nodes to each other. There must be less time, low delay time, more battery life, more speeds of packets.
An algorithm for fault node recovery of wireless sensor networkeSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
IRJET- Energy Efficient Protocol in Wireless Sensor NetworkIRJET Journal
This document summarizes an academic paper that proposes an energy efficient protocol for wireless sensor networks. It begins with an introduction to wireless sensor networks and some of the key challenges, particularly limited energy. It then reviews an existing protocol called LEACH (Low Energy Adaptive Clustering Hierarchy) that aims to distribute energy use among sensor nodes. However, LEACH may not distribute energy optimally if nodes have different starting energy levels. The paper proposes using DEEC (Distributed Energy-Efficient Clustering), which aims to improve network lifetime by more evenly distributing energy use among nodes, regardless of their initial energy levels.
Abstract Now a day’s wireless sensor network has become an interesting research field. Network life time and energy efficiency are one of the main concerns for wireless sensor networks. Sensors are constrained in terms of battery power, storage, limited processing capacity etc. Because of these reasons new protocols are proposed for wireless sensor network. This paper only deals with cluster based hierarchical protocol TEEN (Threshold Sensitive Energy Efficient Sensor Network Protocol). The sensor network architecture in TEEN is based on a hierarchical clustering. TEEN is data-centric, reactive, event-driven protocol which is best suited for time critical application. It transmits data based on hard threshold and soft threshold values. If the thresholds are not reached, then nodes will never communicate. The user will not get any data from network and will not come to know if all the nodes die. So, user will not be able to distinguish between how many nodes are alive or dead in network and will not be able to know about network lifetime. This paper deals with that node will be able to tell base station or sink before leaving network and base station will be aware of alive and dead nodes in the network. Keywords: WSN; TEEN (Threshold Sensitive Energy Efficient Clustering); Hard Threshold; Soft Threshold;
A Fault Tolerant Approach to Enhances Wsn Lifetime in Star TopologyIRJET Journal
This document presents a fault tolerant approach to increase the lifetime of wireless sensor networks using a star topology. It proposes using a gradient diffusion algorithm and fault node recovery algorithm to minimize packet loss and broadcast delay. The fault node recovery algorithm identifies non-functioning sensor nodes using a genetic algorithm and replaces them to extend the network lifetime. Simulation results show the approach increases active nodes by 8-10 times, reduces data loss by 98%, and decreases energy consumption by 27-32% compared to other algorithms. This is achieved by reusing sensor nodes and routing paths to prolong the usability of the wireless sensor network.
EVENT DRIVEN ROUTING PROTOCOLS FOR WIRELESS SENSOR NETWORK- A SURVEYijcsa
Advances in embedded systems have resulted in the development of wireless sensor networks, which not
only provide unique opportunities for monitoring but also controlling homes, cities and the environments.
Recent advancements in wireless sensor network have resulted into many new protocols some of them are
specifically designed for sensor network for detecting the event and routing the event related information to
the base station in efficient manner. This paper surveys recent event driven routing protocols for wireless
sensor network. We have compared various event driven routing protocols using different parameters like
Sink Centric, Node Centric, Reliability, Congestion control, Energy Efficiency, Loss reliability and loss
recovery. We have also described LEACH and MECN protocols but as they are not e
IRJET- A Wireless Sensor Network based Border Monitoring System using ClustersIRJET Journal
This document discusses a proposed wireless sensor network system for border monitoring using clusters. Sensor nodes would be deployed randomly along the border to detect intruders. The nodes would be organized into clusters with cluster heads that form a virtual grid network. If a cluster head detects an inconsistency in border activity compared to expected states, it would inform neighboring nodes and the base station that a border breach has occurred. The system aims to enhance border security while reducing human presence through use of an autonomous wireless sensor network.
IRJET- Flaw Detection in Wireless Sensor Network using a LDA ClassifierIRJET Journal
1) The document discusses fault detection in wireless sensor networks using an LDA classifier. It analyzes different types of faults that can occur in wireless sensor networks, including network-level, hardware-level, and software-level faults.
2) The proposed method uses a linear discriminant analysis classifier for fault diagnosis to reduce optimization. It detects faults based on the rate of change of sensed data and Fourier transform parameters of time, space, and attribute data.
3) Once a fault is detected, fault compensation is introduced to stabilize the faulted data. The method analyzes sensor data characteristics and proposes a belief rule base model for fault diagnosis in wireless sensor networks.
IRJET- Congestion Avoidance and Qos Improvement in Base Station with Femt...IRJET Journal
The document discusses improving quality of service in cellular base stations using femtocells. It proposes using femtocells, which are small low-power cellular base stations installed in homes or businesses, to improve coverage, capacity, and throughput. Femtocells could help reduce packet loss and congestion by closing gaps between network cells. The document reviews existing approaches like hedonic regression models and packet delivery ratio, and analyzes signal-to-noise ratios, interference, and system capacity for macro and small cells. Femtocells may enhance conventional networks by extending coverage areas and improving mobile data capacity.
IRJET-A Brief Study of Leach based Routing Protocol in Wireless Sensor NetworksIRJET Journal
This document summarizes a study of the Low Energy Adaptive Clustering Hierarchy (LEACH) routing protocol for wireless sensor networks. It discusses how LEACH is an energy-efficient clustering-based protocol that helps improve the lifetime of wireless sensor networks. The document also reviews several other routing protocols and concludes that using a round robin schedule could help improve clustering in routing protocols for wireless sensor networks to balance energy usage across nodes.
IRJET- Coverage Hole Avoidance using Fault Node Recovery in Mobile Sensor Net...IRJET Journal
This document presents a fault node recovery algorithm for wireless sensor networks. It proposes combining the Grade Diffusion algorithm with a genetic algorithm to identify and replace faulty sensor nodes. The goal is to replace fewer sensor nodes while reusing existing routing paths, which increases the lifetime of the wireless sensor network and reduces replacement costs. It describes modules for sensor deployment, hole identification when sensors fail, hole healing by moving neighboring sensors, and healing holes when obstacles are present. The algorithm is implemented and evaluated using the Network Simulator NS2 tool. The results show the proposed algorithm increases the number of active sensor nodes and reduces the rate of energy consumption compared to other approaches.
IRJET- Node Deployment for Improving Coverage Area in Wireless Sensor NetworkIRJET Journal
This document summarizes a research paper on node deployment strategies to improve coverage area in wireless sensor networks. It discusses how node deployment is a key design issue that affects network performance metrics like coverage, connectivity, lifetime and robustness. There are two main types of node deployment - manual and random. Manual deployment precisely positions nodes but is not feasible for large-scale networks. Random deployment using techniques like aerial dropping can achieve wide coverage but results may not be optimal. The paper then reviews several node deployment algorithms proposed in other research to optimize coverage through approaches like virtual force-based mobility and bee colony optimization algorithms. It concludes node deployment is important for wireless sensor network effectiveness.
An Improved Enhanced Real Time Routing Protocol (IERT) for Mobile Wireless Se...IRJET Journal
This document discusses an improved enhanced real-time routing protocol (IERT) for mobile wireless sensor networks. The protocol aims to increase network lifetime by using a backup coordinator node if the primary coordinator fails. It also uses a corona-based routing structure to reduce routing holes and increase throughput. The protocol is simulated using NS2 and is shown to increase network lifetime by 30% compared to the previous ERTLD protocol, while also achieving lower delays and higher delivery rates. It provides improvements over real-time routing protocols for wireless sensor networks.
This document summarizes a paper on the challenges of wireless sensor networks, with a focus on time synchronization issues. It discusses how wireless sensor networks face many constraints including limited energy, bandwidth, and resources. It also outlines various challenges such as security, deployment, and design constraints. The document then discusses the importance of time synchronization for applications requiring coordination between sensor nodes. It describes issues that can cause clocks to drift like clock skew. It also analyzes different communication methods and synchronization protocols for wireless sensor networks, comparing their advantages and disadvantages.
Human: Thank you, that is a concise 3 sentence summary that captures the key aspects of the document.
Optimal Operating Performances of Wireless Protocols for Intelligent Sensors ...chokrio
The systems based on intelligent sensors are currently expanding, due to theirs functions and theirs performances of intelligence: transmitting and receiving data in real-time, computation and processing algorithms, metrology remote, diagnostics, automation and storage measurements…The radio frequency wireless communication with its multitude offers a better solution for data traffic in this kind of systems. The mains objectives of this paper is to present a solution of the problem related to the selection criteria of a better wireless communication technology face up to the constraints imposed by the intended application and the evaluation of its key features. The comparison between the different wire-less technologies (Wi-Fi, Wi-Max, UWB, Bluetooth, ZigBee, ZigBeeIP, GSM/GPRS) focuses on their performance which depends on the areas of utilization. Furthermore, it shows the limits of their characteristics. Study findings can be used by the developers/ engineers to deduce the optimal mode to integrate and to operate a system that guarantees quality of communication, minimizing energy consumption, reducing the implementation cost and avoiding time con-straints.
Performance Analysis of Energy Efficient Cross Layer Load Balancing in Tactic...IRJET Journal
This document analyzes the performance of energy efficient cross-layer load balancing in tactical multi-gateway wireless sensor networks. It compares the performance of AODV routing under four different modes: Normal, Optimal, Compressed, and Optimal Compressed. The Optimal Compressed mode uses both load balancing and data compression (Run Length Encoding) and performs best with the lowest delay, highest energy fairness, lowest packet loss rate, and lowest routing overhead according to simulations run in NS2. The proposed approach of using both load balancing and compression outperforms using either technique alone or without them, improving important network metrics like lifetime.
A Virtual Grid-Based Dynamic Routes Adjustment (VGDRA) Scheme for Wireless ...IRJET Journal
This document presents a virtual grid-based dynamic routes adjustment (VGDRA) scheme for wireless sensor networks with a mobile sink. The scheme aims to conserve network energy while dynamically routing information towards the moving sink. It divides the sensor field into a virtual grid with cell header nodes. These cell header nodes participate in adjusting routes according to the latest location of the mobile sink, reducing communication costs and energy consumption compared to having all nodes participate. The VGDRA scheme balances energy expenditure of nodes and allows data to be efficiently disseminated to the mobile sink as it changes locations through dynamic routing reconstruction using the virtual grid structure.
IRJET-Structure less Efficient Data Aggregation and Data Integrity in Sensor ...IRJET Journal
This document proposes a structureless and efficient data aggregation technique for wireless sensor networks that ensures data integrity with low transmission overhead. It introduces a concept where the base station can recover individual sensor data even after aggregation by cluster heads. This allows the base station to verify data integrity and authenticity, as well as perform any desired aggregation functions. It then proposes a structure-free scheme using intracluster and intercluster encryption and aggregation procedures. This scheme aims to address limitations of previous work such as high transmission costs and inability to query individual data values, while maintaining security and scalability. The document analyzes security and scalability aspects and argues the proposed scheme offers improved performance and efficiency for data aggregation in wireless sensor networks.
Node Deployment Technique using Wireless Sensor NetworksIRJET Journal
This document discusses node deployment techniques in wireless sensor networks to improve network lifetime. Wireless sensor networks consist of spatially distributed sensor nodes with limited battery power. The proposed technique uses a multi-objective optimization algorithm based on energy consumption and connectivity to prolong network lifetime. The algorithm aims to find optimal solutions that minimize energy consumption while maintaining network connectivity. It analyzes factors like node deployment, energy consumption, fault tolerance, and data aggregation to efficiently route data from sensor nodes to a base station.
IRJET- Energy Optimization in Wireless Sensor Networks using Trust-Aware Rout...IRJET Journal
This document summarizes a research paper on optimizing energy usage in wireless sensor networks through a trust-aware routing algorithm. The paper proposes the Cost Aware Secure Routing (CASER) protocol, which aims to balance energy consumption across all sensor nodes to maximize network lifetime. CASER supports multiple routing strategies to extend lifetime while increasing routing security. Simulation results show CASER achieves excellent energy balance and increases network lifetime by more than four times under non-uniform energy deployment compared to other approaches. The paper also discusses detecting and recovering from node failures in wireless sensor networks.
Energy efficient ccrvc scheme for secure communications in mobile ad hoc netw...eSAT Journals
Abstract A mobile ad hoc network is a self-configured wireless network in which any mobile node can freely access the network at any time without the need of any fixed infrastructures. Due to high dynamic characteristics, these types of networks are easily prone to various security attacks. There are various mechanisms which provide secure communication i.e., certificate revocation. In this paper, the main challenge of certificate revocation (i.e., to revoke the certificates of the intruders inorder to permanently exclude them from the network activities) is accomplished by adopting CCRVC scheme that also deals with false accusations apart from outperforming the other techniques in case of revoking the intruders certificates. Also this scheme enhances the reliability as well as accuracy as it can vindicate the warned nodes promptly based on the threshold based mechanism. Energy of the nodes must be utilized in an effective manner inorder to secure the network for longer durations as the mobile nodes operate on their batteries. Further, a new technique was proposed, to utilize the energy of the nodes effectively by switching the CHs in a timely manner (since the CHs are likely to lose more energy). Experimental results evaluated by using NS-2 show that the proposed scheme EECCRVC is efficient enough in providing secure communications along with effective energy utilization in mobile ad hoc networks. Keywords: Mobile ad hoc networks, Security, Network Simulator, Certificate Revocation, Energy Utilization
IRJET- Load Optimization with Coverage and Connectivity for Wireless Sensor N...IRJET Journal
The document proposes a Maximum Connected Load Balancing Cover Tree (MCLCT) algorithm to optimize coverage and connectivity in wireless sensor networks. The MCLCT consists of two strategies: 1) A Coverage Optimizing Recursive heuristic that forms maximum disjoint cover sets to ensure full coverage of points of interest. 2) A Probabilistic Load Balancing strategy that determines routing paths in a way that balances energy load evenly among nodes. Simulation results show the MCLCT achieves longer network lifetime than previous algorithms by balancing energy consumption through dynamic cover tree construction and efficient power utilization among sensor nodes.
The document summarizes various techniques for event detection and transmission in wireless sensor networks. It proposes a new protocol that uses a single node to transmit event data to improve reliability, reduce energy consumption and computation costs. The protocol uses clustering for real-time event detection based on sensor thresholds. It applies single and composite decision rules to the clustered sensor data to accurately detect events. Upon detection, a single node is selected to transmit the event data to the sink node.
Multiple Sink Positioning and Relocation for Improving Lifetime in Wireless S...IRJET Journal
The document summarizes research on improving network lifetime in wireless sensor networks through techniques like multiple sink positioning and relocation. It first provides background on wireless sensor networks and their components. It then discusses how clustering sensor nodes and using multiple mobile sink nodes can help balance energy load and prolong network lifetime. Several existing studies that propose algorithms and schemes for optimally positioning and moving sink nodes are reviewed. The document concludes by introducing two new coordinated multiple mobile sink algorithms, MSMA and PMA, that aim to further improve network lifetime performance.
Similar to A Survey of Fault Tolerance Methods in Wireless Sensor Networks (20)
TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...IRJET Journal
1) The document discusses the Sungal Tunnel project in Jammu and Kashmir, India, which is being constructed using the New Austrian Tunneling Method (NATM).
2) NATM involves continuous monitoring during construction to adapt to changing ground conditions, and makes extensive use of shotcrete for temporary tunnel support.
3) The methodology section outlines the systematic geotechnical design process for tunnels according to Austrian guidelines, and describes the various steps of NATM tunnel construction including initial and secondary tunnel support.
STUDY THE EFFECT OF RESPONSE REDUCTION FACTOR ON RC FRAMED STRUCTUREIRJET Journal
This study examines the effect of response reduction factors (R factors) on reinforced concrete (RC) framed structures through nonlinear dynamic analysis. Three RC frame models with varying heights (4, 8, and 12 stories) were analyzed in ETABS software under different R factors ranging from 1 to 5. The results showed that displacement increased as the R factor decreased, indicating less linear behavior for lower R factors. Drift also decreased proportionally with increasing R factors from 1 to 5. Shear forces in the frames decreased with higher R factors. In general, R factors of 3 to 5 produced more satisfactory performance with less displacement and drift. The displacement variations between different building heights were consistent at different R factors. This study evaluated how R factors influence
A COMPARATIVE ANALYSIS OF RCC ELEMENT OF SLAB WITH STARK STEEL (HYSD STEEL) A...IRJET Journal
This study compares the use of Stark Steel and TMT Steel as reinforcement materials in a two-way reinforced concrete slab. Mechanical testing is conducted to determine the tensile strength, yield strength, and other properties of each material. A two-way slab design adhering to codes and standards is executed with both materials. The performance is analyzed in terms of deflection, stability under loads, and displacement. Cost analyses accounting for material, durability, maintenance, and life cycle costs are also conducted. The findings provide insights into the economic and structural implications of each material for reinforcement selection and recommendations on the most suitable material based on the analysis.
Effect of Camber and Angles of Attack on Airfoil CharacteristicsIRJET Journal
This document discusses a study analyzing the effect of camber, position of camber, and angle of attack on the aerodynamic characteristics of airfoils. Sixteen modified asymmetric NACA airfoils were analyzed using computational fluid dynamics (CFD) by varying the camber, camber position, and angle of attack. The results showed the relationship between these parameters and the lift coefficient, drag coefficient, and lift to drag ratio. This provides insight into how changes in airfoil geometry impact aerodynamic performance.
A Review on the Progress and Challenges of Aluminum-Based Metal Matrix Compos...IRJET Journal
This document reviews the progress and challenges of aluminum-based metal matrix composites (MMCs), focusing on their fabrication processes and applications. It discusses how various aluminum MMCs have been developed using reinforcements like borides, carbides, oxides, and nitrides to improve mechanical and wear properties. These composites have gained prominence for their lightweight, high-strength and corrosion resistance properties. The document also examines recent advancements in fabrication techniques for aluminum MMCs and their growing applications in industries such as aerospace and automotive. However, it notes that challenges remain around issues like improper mixing of reinforcements and reducing reinforcement agglomeration.
Dynamic Urban Transit Optimization: A Graph Neural Network Approach for Real-...IRJET Journal
This document discusses research on using graph neural networks (GNNs) for dynamic optimization of public transportation networks in real-time. GNNs represent transit networks as graphs with nodes as stops and edges as connections. The GNN model aims to optimize networks using real-time data on vehicle locations, arrival times, and passenger loads. This helps increase mobility, decrease traffic, and improve efficiency. The system continuously trains and infers to adapt to changing transit conditions, providing decision support tools. While research has focused on performance, more work is needed on security, socio-economic impacts, contextual generalization of models, continuous learning approaches, and effective real-time visualization.
Structural Analysis and Design of Multi-Storey Symmetric and Asymmetric Shape...IRJET Journal
This document summarizes a research project that aims to compare the structural performance of conventional slab and grid slab systems in multi-story buildings using ETABS software. The study will analyze both symmetric and asymmetric building models under various loading conditions. Parameters like deflections, moments, shears, and stresses will be examined to evaluate the structural effectiveness of each slab type. The results will provide insights into the comparative behavior of conventional and grid slabs to help engineers and architects select appropriate slab systems based on building layouts and design requirements.
A Review of “Seismic Response of RC Structures Having Plan and Vertical Irreg...IRJET Journal
This document summarizes and reviews a research paper on the seismic response of reinforced concrete (RC) structures with plan and vertical irregularities, with and without infill walls. It discusses how infill walls can improve or reduce the seismic performance of RC buildings, depending on factors like wall layout, height distribution, connection to the frame, and relative stiffness of walls and frames. The reviewed research paper analyzes the behavior of infill walls, effects of vertical irregularities, and seismic performance of high-rise structures under linear static and dynamic analysis. It studies response characteristics like story drift, deflection and shear. The document also provides literature on similar research investigating the effects of infill walls, soft stories, plan irregularities, and different
This document provides a review of machine learning techniques used in Advanced Driver Assistance Systems (ADAS). It begins with an abstract that summarizes key applications of machine learning in ADAS, including object detection, recognition, and decision-making. The introduction discusses the integration of machine learning in ADAS and how it is transforming vehicle safety. The literature review then examines several research papers on topics like lightweight deep learning models for object detection and lane detection models using image processing. It concludes by discussing challenges and opportunities in the field, such as improving algorithm robustness and adaptability.
Long Term Trend Analysis of Precipitation and Temperature for Asosa district,...IRJET Journal
The document analyzes temperature and precipitation trends in Asosa District, Benishangul Gumuz Region, Ethiopia from 1993 to 2022 based on data from the local meteorological station. The results show:
1) The average maximum and minimum annual temperatures have generally decreased over time, with maximum temperatures decreasing by a factor of -0.0341 and minimum by -0.0152.
2) Mann-Kendall tests found the decreasing temperature trends to be statistically significant for annual maximum temperatures but not for annual minimum temperatures.
3) Annual precipitation in Asosa District showed a statistically significant increasing trend.
The conclusions recommend development planners account for rising summer precipitation and declining temperatures in
P.E.B. Framed Structure Design and Analysis Using STAAD ProIRJET Journal
This document discusses the design and analysis of pre-engineered building (PEB) framed structures using STAAD Pro software. It provides an overview of PEBs, including that they are designed off-site with building trusses and beams produced in a factory. STAAD Pro is identified as a key tool for modeling, analyzing, and designing PEBs to ensure their performance and safety under various load scenarios. The document outlines modeling structural parts in STAAD Pro, evaluating structural reactions, assigning loads, and following international design codes and standards. In summary, STAAD Pro is used to design and analyze PEB framed structures to ensure safety and code compliance.
A Review on Innovative Fiber Integration for Enhanced Reinforcement of Concre...IRJET Journal
This document provides a review of research on innovative fiber integration methods for reinforcing concrete structures. It discusses studies that have explored using carbon fiber reinforced polymer (CFRP) composites with recycled plastic aggregates to develop more sustainable strengthening techniques. It also examines using ultra-high performance fiber reinforced concrete to improve shear strength in beams. Additional topics covered include the dynamic responses of FRP-strengthened beams under static and impact loads, and the performance of preloaded CFRP-strengthened fiber reinforced concrete beams. The review highlights the potential of fiber composites to enable more sustainable and resilient construction practices.
Survey Paper on Cloud-Based Secured Healthcare SystemIRJET Journal
This document summarizes a survey on securing patient healthcare data in cloud-based systems. It discusses using technologies like facial recognition, smart cards, and cloud computing combined with strong encryption to securely store patient data. The survey found that healthcare professionals believe digitizing patient records and storing them in a centralized cloud system would improve access during emergencies and enable more efficient care compared to paper-based systems. However, ensuring privacy and security of patient data is paramount as healthcare incorporates these digital technologies.
Review on studies and research on widening of existing concrete bridgesIRJET Journal
This document summarizes several studies that have been conducted on widening existing concrete bridges. It describes a study from China that examined load distribution factors for a bridge widened with composite steel-concrete girders. It also outlines challenges and solutions for widening a bridge in the UAE, including replacing bearings and stitching the new and existing structures. Additionally, it discusses two bridge widening projects in New Zealand that involved adding precast beams and stitching to connect structures. Finally, safety measures and challenges for strengthening a historic bridge in Switzerland under live traffic are presented.
React based fullstack edtech web applicationIRJET Journal
The document describes the architecture of an educational technology web application built using the MERN stack. It discusses the frontend developed with ReactJS, backend with NodeJS and ExpressJS, and MongoDB database. The frontend provides dynamic user interfaces, while the backend offers APIs for authentication, course management, and other functions. MongoDB enables flexible data storage. The architecture aims to provide a scalable, responsive platform for online learning.
A Comprehensive Review of Integrating IoT and Blockchain Technologies in the ...IRJET Journal
This paper proposes integrating Internet of Things (IoT) and blockchain technologies to help implement objectives of India's National Education Policy (NEP) in the education sector. The paper discusses how blockchain could be used for secure student data management, credential verification, and decentralized learning platforms. IoT devices could create smart classrooms, automate attendance tracking, and enable real-time monitoring. Blockchain would ensure integrity of exam processes and resource allocation, while smart contracts automate agreements. The paper argues this integration has potential to revolutionize education by making it more secure, transparent and efficient, in alignment with NEP goals. However, challenges like infrastructure needs, data privacy, and collaborative efforts are also discussed.
A REVIEW ON THE PERFORMANCE OF COCONUT FIBRE REINFORCED CONCRETE.IRJET Journal
This document provides a review of research on the performance of coconut fibre reinforced concrete. It summarizes several studies that tested different volume fractions and lengths of coconut fibres in concrete mixtures with varying compressive strengths. The studies found that coconut fibre improved properties like tensile strength, toughness, crack resistance, and spalling resistance compared to plain concrete. Volume fractions of 2-5% and fibre lengths of 20-50mm produced the best results. The document concludes that using a 4-5% volume fraction of coconut fibres 30-40mm in length with M30-M60 grade concrete would provide benefits based on previous research.
Optimizing Business Management Process Workflows: The Dynamic Influence of Mi...IRJET Journal
The document discusses optimizing business management processes through automation using Microsoft Power Automate and artificial intelligence. It provides an overview of Power Automate's key components and features for automating workflows across various apps and services. The document then presents several scenarios applying automation solutions to common business processes like data entry, monitoring, HR, finance, customer support, and more. It estimates the potential time and cost savings from implementing automation for each scenario. Finally, the conclusion emphasizes the transformative impact of AI and automation tools on business processes and the need for ongoing optimization.
Multistoried and Multi Bay Steel Building Frame by using Seismic DesignIRJET Journal
The document describes the seismic design of a G+5 steel building frame located in Roorkee, India according to Indian codes IS 1893-2002 and IS 800. The frame was analyzed using the equivalent static load method and response spectrum method, and its response in terms of displacements and shear forces were compared. Based on the analysis, the frame was designed as a seismic-resistant steel structure according to IS 800:2007. The software STAAD Pro was used for the analysis and design.
Cost Optimization of Construction Using Plastic Waste as a Sustainable Constr...IRJET Journal
This research paper explores using plastic waste as a sustainable and cost-effective construction material. The study focuses on manufacturing pavers and bricks using recycled plastic and partially replacing concrete with plastic alternatives. Initial results found that pavers and bricks made from recycled plastic demonstrate comparable strength and durability to traditional materials while providing environmental and cost benefits. Additionally, preliminary research indicates incorporating plastic waste as a partial concrete replacement significantly reduces construction costs without compromising structural integrity. The outcomes suggest adopting plastic waste in construction can address plastic pollution while optimizing costs, promoting more sustainable building practices.
Software Engineering and Project Management - Introduction to Project ManagementPrakhyath Rai
Introduction to Project Management: Introduction, Project and Importance of Project Management, Contract Management, Activities Covered by Software Project Management, Plans, Methods and Methodologies, some ways of categorizing Software Projects, Stakeholders, Setting Objectives, Business Case, Project Success and Failure, Management and Management Control, Project Management life cycle, Traditional versus Modern Project Management Practices.
A vernier caliper is a precision instrument used to measure dimensions with high accuracy. It can measure internal and external dimensions, as well as depths.
Here is a detailed description of its parts and how to use it.
Understanding Cybersecurity Breaches: Causes, Consequences, and PreventionBert Blevins
Cybersecurity breaches are a growing threat in today’s interconnected digital landscape, affecting individuals, businesses, and governments alike. These breaches compromise sensitive information and erode trust in online services and systems. Understanding the causes, consequences, and prevention strategies of cybersecurity breaches is crucial to protect against these pervasive risks.
Cybersecurity breaches refer to unauthorized access, manipulation, or destruction of digital information or systems. They can occur through various means such as malware, phishing attacks, insider threats, and vulnerabilities in software or hardware. Once a breach happens, cybercriminals can exploit the compromised data for financial gain, espionage, or sabotage. Causes of breaches include software and hardware vulnerabilities, phishing attacks, insider threats, weak passwords, and a lack of security awareness.
The consequences of cybersecurity breaches are severe. Financial loss is a significant impact, as organizations face theft of funds, legal fees, and repair costs. Breaches also damage reputations, leading to a loss of trust among customers, partners, and stakeholders. Regulatory penalties are another consequence, with hefty fines imposed for non-compliance with data protection regulations. Intellectual property theft undermines innovation and competitiveness, while disruptions of critical services like healthcare and utilities impact public safety and well-being.
Best Practices of Clothing Businesses in Talavera, Nueva Ecija, A Foundation ...IJAEMSJORNAL
This study primarily aimed to determine the best practices of clothing businesses to use it as a foundation of strategic business advancements. Moreover, the frequency with which the business's best practices are tracked, which best practices are the most targeted of the apparel firms to be retained, and how does best practices can be used as strategic business advancement. The respondents of the study is the owners of clothing businesses in Talavera, Nueva Ecija. Data were collected and analyzed using a quantitative approach and utilizing a descriptive research design. Unveiling best practices of clothing businesses as a foundation for strategic business advancement through statistical analysis: frequency and percentage, and weighted means analyzing the data in terms of identifying the most to the least important performance indicators of the businesses among all of the variables. Based on the survey conducted on clothing businesses in Talavera, Nueva Ecija, several best practices emerge across different areas of business operations. These practices are categorized into three main sections, section one being the Business Profile and Legal Requirements, followed by the tracking of indicators in terms of Product, Place, Promotion, and Price, and Key Performance Indicators (KPIs) covering finance, marketing, production, technical, and distribution aspects. The research study delved into identifying the core best practices of clothing businesses, serving as a strategic guide for their advancement. Through meticulous analysis, several key findings emerged. Firstly, prioritizing product factors, such as maintaining optimal stock levels and maximizing customer satisfaction, was deemed essential for driving sales and fostering loyalty. Additionally, selecting the right store location was crucial for visibility and accessibility, directly impacting footfall and sales. Vigilance towards competitors and demographic shifts was highlighted as essential for maintaining relevance. Understanding the relationship between marketing spend and customer acquisition proved pivotal for optimizing budgets and achieving a higher ROI. Strategic analysis of profit margins across clothing items emerged as crucial for maximizing profitability and revenue. Creating a positive customer experience, investing in employee training, and implementing effective inventory management practices were also identified as critical success factors. In essence, these findings underscored the holistic approach needed for sustainable growth in the clothing business, emphasizing the importance of product management, marketing strategies, customer experience, and operational efficiency.
Profiling of Cafe Business in Talavera, Nueva Ecija: A Basis for Development ...IJAEMSJORNAL
This study aimed to profile the coffee shops in Talavera, Nueva Ecija, to develop a standardized checklist for aspiring entrepreneurs. The researchers surveyed 10 coffee shop owners in the municipality of Talavera. Through surveys, the researchers delved into the Owner's Demographic, Business details, Financial Requirements, and other requirements needed to consider starting up a coffee shop. Furthermore, through accurate analysis, the data obtained from the coffee shop owners are arranged to derive key insights. By analyzing this data, the study identifies best practices associated with start-up coffee shops’ profitability in Talavera. These findings were translated into a standardized checklist outlining essential procedures including the lists of equipment needed, financial requirements, and the Traditional and Social Media Marketing techniques. This standardized checklist served as a valuable tool for aspiring and existing coffee shop owners in Talavera, streamlining operations, ensuring consistency, and contributing to business success.
In May 2024, globally renowned natural diamond crafting company Shree Ramkrishna Exports Pvt. Ltd. (SRK) became the first company in the world to achieve GNFZ’s final net zero certification for existing buildings, for its two two flagship crafting facilities SRK House and SRK Empire. Initially targeting 2030 to reach net zero, SRK joined forces with the Global Network for Zero (GNFZ) to accelerate its target to 2024 — a trailblazing achievement toward emissions elimination.
Exploring Deep Learning Models for Image Recognition: A Comparative Reviewsipij
Image recognition, which comes under Artificial Intelligence (AI) is a critical aspect of computer vision,
enabling computers or other computing devices to identify and categorize objects within images. Among
numerous fields of life, food processing is an important area, in which image processing plays a vital role,
both for producers and consumers. This study focuses on the binary classification of strawberries, where
images are sorted into one of two categories. We Utilized a dataset of strawberry images for this study; we
aim to determine the effectiveness of different models in identifying whether an image contains
strawberries. This research has practical applications in fields such as agriculture and quality control. We
compared various popular deep learning models, including MobileNetV2, Convolutional Neural Networks
(CNN), and DenseNet121, for binary classification of strawberry images. The accuracy achieved by
MobileNetV2 is 96.7%, CNN is 99.8%, and DenseNet121 is 93.6%. Through rigorous testing and analysis,
our results demonstrate that CNN outperforms the other models in this task. In the future, the deep
learning models can be evaluated on a richer and larger number of images (datasets) for better/improved
results.
Online music portal management system project report.pdfKamal Acharya
The iMMS is a unique application that is synchronizing both user
experience and copyrights while providing services like online music
management, legal downloads, artists’ management. There are several
other applications available in the market that either provides some
specific services or large scale integrated solutions. Our product differs
from the rest in a way that we give more power to the users remaining
within the copyrights circle.
OCS Training Institute is pleased to co-operate with
a Global provider of Rig Inspection/Audits,
Commission-ing, Compliance & Acceptance as well as
& Engineering for Offshore Drilling Rigs, to deliver
Drilling Rig Inspec-tion Workshops (RIW) which
teaches the inspection & maintenance procedures
required to ensure equipment integrity. Candidates
learn to implement the relevant standards &
understand industry requirements so that they can
verify the condition of a rig’s equipment & improve
safety, thus reducing the number of accidents and
protecting the asset.
Encontro anual da comunidade Splunk, onde discutimos todas as novidades apresentadas na conferência anual da Spunk, a .conf24 realizada em junho deste ano em Las Vegas.
Neste vídeo, trago os pontos chave do encontro, como:
- AI Assistant para uso junto com a SPL
- SPL2 para uso em Data Pipelines
- Ingest Processor
- Enterprise Security 8.0 (Maior atualização deste seu release)
- Federated Analytics
- Integração com Cisco XDR e Cisto Talos
- E muito mais.
Deixo ainda, alguns links com relatórios e conteúdo interessantes que podem ajudar no esclarecimento dos produtos e funções.
https://www.splunk.com/en_us/campaigns/the-hidden-costs-of-downtime.html
https://www.splunk.com/en_us/pdfs/gated/ebooks/building-a-leading-observability-practice.pdf
https://www.splunk.com/en_us/pdfs/gated/ebooks/building-a-modern-security-program.pdf
Nosso grupo oficial da Splunk:
https://usergroups.splunk.com/sao-paulo-splunk-user-group/
An Internet Protocol address (IP address) is a logical numeric address that is assigned to every single computer, printer, switch, router, tablets, smartphones or any other device that is part of a TCP/IP-based network.
Types of IP address-
Dynamic means "constantly changing “ .dynamic IP addresses aren't more powerful, but they can change.
Static means staying the same. Static. Stand. Stable. Yes, static IP addresses don't change.
Most IP addresses assigned today by Internet Service Providers are dynamic IP addresses. It's more cost effective for the ISP and you.