Questions tagged [cleaning]
For questions about cleaning agents and methods used to remove dirt, stains, residues, and bad smells, including proper waste disposal. For particular questions about surfactants, use the [surfactants] tag.
154
questions
2
votes
0
answers
82
views
Fundamental reasons for using vapors for ALD rather than solutions
Atomic layer deposition (ALD) has been developed for many materials, as can be seen from this overview: https://atomiclimits.com/alddatabase/
However, a search for liquid phase ALD gives less results.
...
- 45
4
votes
2
answers
596
views
I left scented candles in a polypropylene container. How do I remove the smell?
I left scented candles in a polypropylene container, for many weeks.
How do I remove the smell?
I've tried:
Hand wash with Dish Soap (a few times)
Hand wipe with Isopropyl Alcohol (a few times)
...
- 73
0
votes
0
answers
50
views
Cleaning Cobalt with Dodecylbenzene Sulphonic Acid
Here in Brazil we use a special detergent to clean up metals, based on Dodecylbenzene Sulphonic Acid, it is very effective at shining up all sorts of different metals.
I recently acquired 2 samples of ...
0
votes
0
answers
297
views
Best ways to dissolve large amounts of candle wax?
I work for a company that occasionally rents out candles and (mostly glass) holders for events. Many times these holders come back covered in candle wax. I am looking for an efficient way to clean ...
2
votes
1
answer
796
views
How to Remove Copper Sulphate from a Leather Belt
I was careless when we were doing a routine footbath of our sheep in copper sulphate solution, and it splashed onto my leather belt. There are now little dark spots all over it, and I was wondering ...
- 29
-3
votes
2
answers
92
views
Sodium hypochlorite bleach and chromium mop handle [closed]
I have been using sodium hypochlorite bleach as a cleaning method in my house. During a two week period when I was at home I left the mop handle in the bucket with bleach in it. I did not know it was ...
- 9
0
votes
0
answers
36
views
Can I reuse LDPE bottles after trace element analysis?
I run some algae samples through mass spec a few times over the month to test the P content of algal samples. My (simplified) procedure was as follows:
Put a small portion of algae in a teflon vessel
...
- 29
0
votes
0
answers
1k
views
Chemistry behind cleaning with vinegar vs citric acid; do they work differently? Should I prepare the same pH solutions to compare them?
I noticed a pack of "Mysterious Citric Acid" while out shopping so I picked it up to see what the big deal was. Several palates of the stuff had just arrived at a local outlet store. I ...
- 5,900
2
votes
0
answers
242
views
I stained my lab workstation with Coomassie blue. How do I clean it?
I stained my work station with Coomassie blue solution during my SDS-PAGE protocol. I have been cleaning but the solution seems to can't be removed. What should I use to remove all these stains?
- 23
2
votes
0
answers
97
views
Is cleaning silverware with tinfoil and salt dangerous?
Premise: I'm not a chemist and I've already had a look at this and this but they don't fully answer my question.
I have read that you can clean silverware using tinfoil, salt and water, though from ...
user133482
1
vote
0
answers
91
views
Can stainless steel "soap" bars actually work or is it just deceptive marketing?
The Wikipedia — Stainless steel soap article sounds highly skeptical, although it does include a possible mechanism involving the chromium in the stainless steel binding with the sulfur compounds and ...
- 11
-1
votes
1
answer
5k
views
Drano and Bleach reaction? [closed]
I’m not sure if anyone can answer this but I might’ve messed up, or I’m just overreacting.
My bathtub has been clogged for about a month now and I used a splash of Drano to see if it would do anything,...
- 1
2
votes
0
answers
257
views
What will remove this screen printed logo without destroying the polycarbonate safety sunglasses lens?
I bought some safety sunglasses and didn't notice until I'd taken the tags off that there's an annoying logo painted or printed right in my field of view. (You can feel with your fingertips or ...
- 129
4
votes
0
answers
75
views
Why do vessels get a better shine when tea-leaves are soaked overnight in it before washing?
The other day I dumped consumed tea leaves into a brass utensil because I needed the tea-pan urgently. The vessel with the tea leaves didn't get around for cleaning until the next day. Ergo, the tea ...
- 904
0
votes
0
answers
35
views
Best way to bond polyethylene to to aluminum?
I am a quality engineer looking for some chemistry expertise that can hopefully assist in solving a problem we are having at our company. We are a water filtration company and our location produce the ...
- 11
-1
votes
1
answer
44
views
Brown sediment in shower, nothing works
I have an ensuite shower with white floor (or call it pad) which is from some kind of composite plastic material.
Over time, brown discoloration and sediments started to acumulate in areas where the ...
- 99
6
votes
2
answers
3k
views
Are acids effective in removing soap scum?
In my experience, most of the commercial products intended for removing soap scum from bathroom surfaces are ineffective. No matter how long you leave it on or how hard you scrub, the soap scum doesn'...
- 874
0
votes
0
answers
246
views
Can vinegar be used to clean wood (a porous surface) after it has been cleaned with germicidal bleach?
I recently cleaned moldy air vents and hardwood floor with diluted germicidal bleach water (1/3 cup bleach to 1 gall). I would like to go back in with vinegar to make sure the mold stays gone, mostly ...
- 21
0
votes
1
answer
160
views
Getting magnesium chloride gunk off a wood shelf
I have a situation. Some magnesium bath salts got left on a wood shelf in my bathroom in a bag that was not closed. Being hydroscopic, it sucked up a ton of water, and then spilled onto the wood. ...
- 177
2
votes
0
answers
446
views
Rotten chicken smell
My boyfriend and I have a camper and he forgot to take a package of chicken out of the refrigerator before parking it. The chicken sat in the fridge which was off in the heat for a few months. We ...
- 29
1
vote
1
answer
895
views
Does sodium percarbonate break down into 'safe' compounds in water?
I'm writing this question as a wine brewer (not a chemist), so apologies if I use inaccurate terminology.
I'm interested in using sodium percarbonate as a cleaning/sanitising solution for brewing ...
- 159
1
vote
1
answer
117
views
Could mixing naphtha-based cleaner and industrial floor cleaner produce hazardous substances?
I work in a car dealership, and the guy who cleans the workshop uses an industrial floor scrubber / vac on the floor tiles. On particularly stubborn oil / soot marks, he uses naphtha-based brake ...
- 21
-3
votes
1
answer
75
views
How to dissolve cobalt ferrite spinel for cleaning reactor? [closed]
I put some cobalt ferrite powder and did some catalytic test and I can't clean my reactor very well. I have already used aqua regia, hydrochloric and nitric acids, sodium hydroxide at high ...
-3
votes
1
answer
48
views
Possible Plumbing Acid through Leaky Pipe in Floating Ceiling, How to Test/Clean?
So I had a plumber in the other day, and I don't know if he used acid drain cleaner or not. The pipe where the possible leak is, is over some drop ceiling (vinyl or expanded polystyrene).
Before I go ...
-2
votes
1
answer
354
views
How does soap help in cleaning clothes and rinsing off oil and grease?
When we say that we agitate clothes so that grease particles get separate out from clothes as ionic part of hydrocarbon chains of soap is attached to water and non polar part of chain is dissolved in ...
1
vote
0
answers
81
views
Converting dissolved chromates to solids for disposal
I have 4 liters of electrolysis waste that was used to process stainless steel cathodes.
About half of it was oxalic acid based and the other half was sodium bicarbonate based (currently stored ...
- 1,172
2
votes
0
answers
54
views
Best bet for separating fused glassware
I have a sintered glass funnel stuck in a flask with a 24/40 ground glass joint.
I regularly used this glassware to process very dilute solutions of uncured photopolymer resin dissolved in ethanol. ...
- 1,172
1
vote
0
answers
45
views
General cleaning solution for clinical chemistry applications
I want to reuse some plastic and glass items that I am using to do colorimetric concentration analysis of serum and urine. There are some enzymatic assays, mineral assays and so on. I have been trying ...
- 261
3
votes
0
answers
129
views
Can Chlorhexidine Gluconate (CHG) be used for disinfection of medical device (e.g. of polyethylene material)? [closed]
Chlorhexidine is commonly used as a skin antiseptic, hand disinfectant, endodontic irrigant etc. It possess antibacterial and antifungal properties, and is considered low toxicity when used in low ...
- 39
1
vote
1
answer
249
views
Cleaning with Hydrogen Peroxide is not a chemical process?
Reading here:
if the peroxide does seem to help is that the bubbles forming and foaming is helping dislodge tiny particles in the cracks of the mineral.
Is this the case in general for cleaning with ...
- 435
1
vote
0
answers
236
views
What caused a colour change when I mixed two different dish soaps?
I recently purchased "organic" dish soap refill made from saponified coconut oil and potassium soap (full ingredient list). Instead of waiting for the old dish soap (Dawn) to be completely ...
- 27
2
votes
0
answers
94
views
Appropriate ways to remove aluminum from the surface of glass?
I'm looking for a way to treat the surface of borosilicate glassware such that it won't contaminate solutions of puriss reagents in conditions that pure $\ce{SiO2}$ wouldn't, yet keep the bulk ...
- 1,097
0
votes
0
answers
153
views
Does burning plastic completely disintegrate it? Accidentally melted some plastic in a BBQ, wondering if pyrolytic cleaning is an option
I accidentally barbecued some plastic today, making quite a mess. It's a cushion for a lawn chair, so I imagine probably some sort of plastic or polyurethane.
Rather than cleaning melted plastic ...
- 137
0
votes
0
answers
93
views
Is my bottle of "RooR"-brand glass cleaning liquid pure isopropyl alcohol or something else?
I have this exact bottle: https://www.grasscity.eu/media/catalog/product/cache/2b55fa971a29a7844993ad77b24950ac/i/m/img_3633_1_1.jpg
I originally purchased it to clean my vaporizer (I've since stopped ...
- 1
1
vote
0
answers
49
views
Can PTFE be dissolved by aqua regia? [duplicate]
At the moment I am cleaning crucibels in aqua regia. I was wondering, whether I could stir it with a standard PTFE stirring bar or not?
I am not sure if it is needed or if the normal flactuation in ...
- 419
1
vote
0
answers
83
views
Solvent + Photopolymer Waste Disposal
I have a 3L jug of SLA printer-related waste that's been sitting under my desk for a while now and I'd really like to finally figure out how to get rid of it. It contains:
Ethanol (primarily) and ...
- 1,172
1
vote
0
answers
203
views
How to completely remove Iron II Acetate from a steel surface through a chemical reaction?
Is there any suggestion to completely remove iron II acetate from a zinc-alloy steel surface? It can't be something abrasive, or if it is, it must be completely soluble.
Background:
My bike chain, ...
- 11
-1
votes
2
answers
632
views
Electrolysis of copper chloride in solution of Vinegar + H2O2 + NaCl after copper etching
I did copper etching (to make a PCB) using a solution of vinegar + H202 + NaCl and now I need to dispose the solution. There is no waste collection for this kind of stuff where I live, so after some ...
0
votes
0
answers
79
views
Surfactant micelles from glassware
FYI to start- I'm not a chemist by training, so assume I'm missing some basic knowledge of the field.
I've been trying to do some electrodeposition with an iridium tetrachloride-based solution, and my ...
- 89
0
votes
1
answer
581
views
Phosphoric acid spill cleanup
While working with some rust converter (MSDS, ~20% phosphoric acid by weight), a sequence of events that would make Rube Goldberg proud led to me spilling about 500mL of it all over the place. Yes I ...
- 1,172
13
votes
2
answers
3k
views
Cleaning with vinegar and sodium bicarbonate
Mixing sodium bicarbonate with vinegar (and sometimes adding dishwasher detergent) is quite a common tip on the internet. But I have never understood the reason.
I saw there was a question about using ...
- 241
2
votes
0
answers
350
views
Can acetic or citric acid be too highly concentrated when used for cleaning copper?
I intend to clean a copper surface with acetic or alternatively citric acid. There are many different concentrations recommended by different sources on the internet. For example vinegar with 10% acid ...
- 121
-1
votes
1
answer
1k
views
What is best to clean mold off PVC plastic window frames?
To remove black mold on window sills right next to the glass pane (as a result of condensation), I usually use a combination of water and dish soap or diluted bleach. Is there another chemical that ...
- 11
-4
votes
2
answers
114
views
Chemical difference between hand sanitizer vs hand wash? [closed]
Is there any major difference between hand sanitizer and hand wash?
Is it safe to use hand wash only alone, without use of water?
- 93
1
vote
0
answers
49
views
Powdered Dipropylene Glycol Monomethyl Ether [closed]
Entrepreneur here, background in electronics, so thank you in advance for your patience with me.
Question:
Is Dipropylene Glycol Monomethyl Ether available as a powder? If not, is there a powdered ...
- 19
1
vote
0
answers
58
views
how to remove acetone free nail polish remover from a thinkpad laptop keyboard? [duplicate]
I had dried spraypaint on my laptop keyboard and I tried my oxx studio brand nail polish wipes
(ingredients; propylene glycol, dimethyl adipate, dimethyl glutarate, dimethyl succinate, caprylic/capric ...
- 11
9
votes
3
answers
4k
views
Why are acetic acid and sodium bicarbonate mixed to unblock a drain?
I have always wondered about the rationale behind combining white vinegar and sodium bicarbonate to perform household cleaning jobs, and to unblock drains. I would have expected white vinegar to act ...
- 201
4
votes
1
answer
8k
views
Isopropyl Alcohol Vs Acetone for Dissolving Organic Contaminants on PCB
Acetone is widely used in labs as a solvent to clean vials and tubes as it is a good solvent for organic materials. Isopropyl alcohol is used as a rubbing alcohol for cleaning contaminants on the body ...
- 199
1
vote
0
answers
86
views
What would be the best combination to clean polyurethane [closed]
I am struggling to find the best composition to clean old golf balls and make them white again.
The balls are made out of different types of coating, e.g. polyurethane or an isomer.
I have found ...
- 19
-2
votes
2
answers
58
views
How to properly clean spilled battery content?
I was cleaning my wardrobe when I found some huge white-brown blots where there was a lot of batteries that I have use. I was keeping them for properly disposal but I forget to do that.
I ...
- 152