I have port forwarded my modem/router from my ISP and my router to open ports 1723 and 3389 for PPTP and RDP successfully. This is my current setup:
ISP modem/router (FiberHome AN5506-04-FA):
- Port forwarded 1723 and 3389 to 192.168.1.3/24
- Placed 192.168.1.3/24 in DMZ
- WAN IP is 112.x.x.x
- Cannot find VPN passthrough option
- disabled firewall and upnp
then
my router (DLink with DD-WRT):
- Connected LAN1 of the ISP router to the WAN port.
- Setup WAN port to static ip 192.168.1.3/24. DNS1 is set to 192.168.1.1. DNS2 is set to the ISP's DNS.
- LAN ip is 192.168.0.1/24
- configured static leases: 192.168.0.2 for my PC to RDP, 192.168.0.3 for my Windows Server 2008 R2 with RRAS configured for VPN
- port forwarded 3389 to PC1
- port forwarded 1723 to WS08
- Placed WS08 to DMZ
- PPTP passthrough is enabled
- disabled firewall and upnp
then on my devices:
PC1 (192.168.0.2/24)
- RDP service is enabled
- Windows Firewall is turned off
- verified via canyouseeme.org that port 3389 is open
then on my VPN server
WS08 (192.168.0.3/24, two NICs)
- NIC 1 has the static IP address of 192.168.0.3 (External)
- NIC 2 is disconnected (Internal)
- IP address range for the VPN clients is static/no radius (192.168.27.250-254)
- Firewall is turned off
- verified via canyouseeme.org that port 1723 is open
When I am connected using laptop to another network (external IP is 121.x.x.x), I can remotely access PC1 through the WAN public IP (112.x.x.x). But when I dial in from a Windows 7 VPN dialer supplying the WAN public IP, error 807 appears. But also I can connect to the VPN server if my laptop is connected to the same network as the VPN server and supplying the dialer with the private IP of the server (192.168.0.3)
I am stuck and don't know what else needs to be checked.
Appreciate any responses.
