Frii's equation models free space path loss and predicts the amount of power (Pr) that can be received by an antenna at a distance D from the transmitting antenna. The equation is:
Pr = Pt * Gt * Gr * λ2 / (4πD)2 * L
Where Pt is the transmitted power, Gt and Gr are the gains of the transmitting and receiving antennas, λ is the wavelength, D is the distance between antennas, and L accounts for transmission losses. According to the model, received power decays quadratically with distance, and factors like antenna gain and wavelength affect reception levels.
This document discusses signals and systems. It defines signals as physical quantities that vary with respect to time, space, or another independent variable. Signals can be classified as discrete time or continuous time. It also defines unit impulse and unit step functions for discrete and continuous time. Periodic and aperiodic signals are discussed. The Fourier series and Fourier transform are introduced as ways to represent signals in the frequency domain. The Laplace transform, which generalizes the Fourier transform, is also mentioned. Key properties of linear time-invariant systems like superposition, time-invariance, and convolution are covered. Finally, sampling theory and the z-transform, which is analogous to the Laplace transform for discrete-time systems, are summarized at a high level
This document provides an overview of a webinar on digital signal processing. It introduces the presenter, Dr. Steve Mackay, and provides instructions for interacting during the webinar. It then gives brief biographical information about Dr. Mackay. The remainder of the document outlines key topics to be covered, including definitions of digital and analog signals, applications of DSP, sampling theory, and analog to digital conversion. Diagrams are provided to illustrate various DSP concepts and systems.
1. There are four main forms of amplitude modulation: conventional AM (DSB-LC), DSB-SC, SSB, and VSB.
2. DSB-LC, or full AM, results in a carrier signal along with two sideband signals, occupying the widest bandwidth.
3. DSB-SC suppresses the carrier signal, reducing bandwidth usage while retaining both sidebands.
4. SSB modulation filters out either the upper or lower sideband, allowing for transmission using only a single sideband, further reducing the required bandwidth.
TIME-VARYING FIELDS AND MAXWELL's EQUATIONS -Unit 4 -NotesDr.SHANTHI K.G
- Time varying electromagnetic fields are represented as functions of both space (x,y,z) and time (t). They are produced by accelerated charges or time varying currents.
- Static electric fields are produced by stationary charges, static magnetic fields by steady currents. Time varying currents produce electromagnetic fields or waves.
- Faraday's law of induction states that a time-varying magnetic field produces an induced electromotive force (emf) in a closed circuit. This emf is equal to the negative of the rate of change of the magnetic flux through the circuit.
The document discusses standard test signals that are used to analyze dynamic systems in signal and system analysis. It describes six common standard signals: 1) Unit step function signal, 2) Unit ramp function signal, 3) Unit parabolic function signal, 4) Unit impulse function signal, 5) Sinusoidal signal, and 6) Exponential signal. For each signal, it provides the mathematical definition and describes how it can be used to characterize the behavior of a system. The standard signals are designed to model different characteristics that may appear in real-world input signals like sudden changes, constant velocity, and constant acceleration.
Frii's equation models free space path loss and predicts the amount of power (Pr) that can be received by an antenna at a distance D from the transmitting antenna. The equation is:
Pr = Pt * Gt * Gr * λ2 / (4πD)2 * L
Where Pt is the transmitted power, Gt and Gr are the gains of the transmitting and receiving antennas, λ is the wavelength, D is the distance between antennas, and L accounts for transmission losses. According to the model, received power decays quadratically with distance, and factors like antenna gain and wavelength affect reception levels.
This document discusses signals and systems. It defines signals as physical quantities that vary with respect to time, space, or another independent variable. Signals can be classified as discrete time or continuous time. It also defines unit impulse and unit step functions for discrete and continuous time. Periodic and aperiodic signals are discussed. The Fourier series and Fourier transform are introduced as ways to represent signals in the frequency domain. The Laplace transform, which generalizes the Fourier transform, is also mentioned. Key properties of linear time-invariant systems like superposition, time-invariance, and convolution are covered. Finally, sampling theory and the z-transform, which is analogous to the Laplace transform for discrete-time systems, are summarized at a high level
This document provides an overview of a webinar on digital signal processing. It introduces the presenter, Dr. Steve Mackay, and provides instructions for interacting during the webinar. It then gives brief biographical information about Dr. Mackay. The remainder of the document outlines key topics to be covered, including definitions of digital and analog signals, applications of DSP, sampling theory, and analog to digital conversion. Diagrams are provided to illustrate various DSP concepts and systems.
The document discusses Haml and Sass, which are template languages used to generate HTML and CSS respectively. Haml uses indentation and special characters to structure markup concisely while Sass allows nesting, variables, and other features to simplify CSS authoring. The document provides examples of basic Haml and Sass syntax and recommends starting with individual templates, using the proper file extensions, and checking whitespace when errors occur.
Web Development with CoffeeScript and SassBrian Hogan
The document discusses using CoffeeScript and Sass to improve the web development process. CoffeeScript offers a cleaner syntax for writing JavaScript code, while Sass provides extensions to CSS. Together with an automated workflow, these tools allow developers to build modern web applications using better techniques that make the code more readable and maintainable. The presentation provides examples of how CoffeeScript cleans up JavaScript code and syntax, such as declaring variables and functions, as well as how it interacts with libraries like jQuery.
The document discusses Sass, a CSS extension language that adds powerful features like variables, nested rules, mixins, functions and more. It outlines problems with traditional CSS like repetition, maintenance issues and lack of abstraction capabilities. Sass aims to solve these through its additional features that allow for more modular, reusable and maintainable stylesheets. It also introduces Compass, a Sass extension framework and library, and discusses best practices like organization, sprites and separation of concerns.
Covers frameworks, navigation patterns, preprocessors, responsive images, responsive data tables, polyfills. Presentation at the Cleveland Web Standards Association, October 30, 2012.
AngularJS is one of today's hottest JavaScript MVC Frameworks. In this session, we'll explore many concepts it brings to the world of client-side development: dependency injection, directives, filters, routing and two-way data binding. We'll also look at its recommended testing tools and build systems. Finally, you'll learn about my experience developing several real-world applications using AngularJS, HTML5 and Bootstrap.
* 다운로드 받으신 후 PPT파일의 슬라이드 노트를 참고하세요.
* 최신 파일(2016.7.)은 용량 관계상 PDF로 제공합니다.
아래 URL에서 내려받으실 수 있습니다.
http://www.slideshare.net/usableweb/20167-pdf
* 본 자료는 개인의 의견으로 소속기관인 한국디자인진흥원의 공식입장과는 다를 수 있음을 밝힙니다.
작성 : 윤성원. 한국디자인진흥원 서비스디자인팀장
업데이트 : 2009 ~ 2016.4.
작성 목적 : 서비스디자인의 의의와 중요성을 이해할 수 있도록 돕기 위함
주요 내용 :
디자인의 역할 확대
배경, 중요성
서비스디자인 개념
용어, 프로세스, 방법론,
서비스디자이너의 필요 역량
서비스디자인을 통한 사회문제해결
서비스디자인 역사와 동향
정책 방향 등
출처 : http://cafe.naver.com/usable/725
서비스디자인에 대해 궁금하시다면...
http://www.usable.co.kr
* 이 발표자료를 글로 설명한 자료를 보시려면....
http://servicedesign.tistory.com/62
This document discusses responsive web design techniques including:
- Using viewports and media queries to adapt layouts for different screen sizes.
- Sizing images fluidly using max-width: 100% so they are responsive.
- Design patterns for responsive tables, hiding/showing content, and converting menus to dropdowns.
- Tools like Modernizr, Respond.js, and frameworks like LESS to support responsive design goals.
- Tips like using relative units (ems/percentages) over fixed pixels and transitions for visual changes.
The SPDY Protocol is likely going to be the successor of http. This short talk summarizes the most important points and includes a demo on how to migrate a Wordpress blog on httpd.
[IoT] MAKE with Open H/W + Node.JS - 3rdPark Jonggun
IoT 시대에 Opensource H/W 와 NodeJS 를 이용하여 누구나 나만의 H/W + S/W + Service 를 만들기 위한 교육 과정을 만들어 보았습니다.
상상했던 아이디어를 Raspberry Pi 기반으로 나만의 IoT 제품을 현실로 만들어 보세요.
Lesson 1 - Introduction : IoT개요, Opensource H/W, 라즈베리파이 기초
Lesson 2 - Linux : Raspberry Pi 에서 리눅스 활용하기
Lesson 3 - Node.JS : Raspberry Pi 에서 Node.JS 로 프로그래밍 하기
Lesson 4 - Sensor : GPIO 를 Node.JS 로 동작시켜 센서 제어하기
Lesson 5 - Project : Raspberry Pi 로 스마트폰 + 무선 IoT 오디오 제작
챕터가 완성되는대로 추가적으로 공유하겠습니다.
Circulus Site - http://www.circul.us
Circulus Group - http://group.circul.us
본 워크샵에서는 사용자가 Wild Rydes 서비스를 통해 현재 ���는 위치에서 유니콘 호출 및 탑승을 할 수 있는 스타트업 아이디어를 구현한다는 시나리오로 함께 웹 애플리케이션을 만들어 배포해 봅니다. 이 서비스는 사용자에게 HTML 기반 사용자 인터페이스를 제공하여, 사용자가 원하는 위치를 표시하고 유니콘 요청을 하면, 가까운 유니콘을 보내기기 위해 RESTful 웹 서비스로 백엔드를 제공합니다. 또한, 사용자가 유니콘 타기를 요청하기 전에 기본적으로 회원 가입을 하고 로그인 할 수있는 기능을 제공합니다. 이를 위해 AWS Lambda, Amazon API Gateway, Amazon S3, Amazon DynamoDB, Amazon Cognito를 활용합니다.
"왕초보의 앱 확장 프로그램 개발 입문하기"
iOS 개발자의 친구, Safari와 Xcode의 확장 프로그램을 써보신 적 있나요? 꼭 Safari와 Xcode가 아니어도 확장 프로그램을 써본 경험은 있을 거예요. 개발하다 필요한 순간에 코드 스냅샷을 찍거나 웹 사이트 번역을 하거나 팝업창을 띄운다던가... 이런 경험들 말이죠.
이러한 사용 경험을 개발 경험으로 바꾼다면 어떨까요?
이 세션에서는 Safari Extension과 Xcode Extension을 만드는 과정을 간단하게 공유해 드리려고 합니다. 과자 먹듯이 가볍게 들어주세요!
-------------
Let's Swift 2022 의 '우당탕탕! Safari Extensiond에서 Xcode Extension까지' 세션의 발표자료입니다.
(2022-11-30)
AWSKRUG 정기 세미나 (2016년 9월) - Lambda + S3 썸네일 생성 및 운영창훈 정
AWSKRUG 정기 세미나 (2016년 9월) - 서버리스(Serverless) 아키텍처 에서 발표한 내용
한글폰트 문제로 깨지기도 하고 디자인도 이상하게 변경됬습니다. 원본은 SpeakerDeck 에서 확인해주세요 ~ https://speakerdeck.com/seapy/lambda-plus-s3-sseomneil-saengseong-mic-unyeong-awskrug-jeonggi-semina-2016nyeon-9weol
1. Compass 사용법.
1. Compass를 간단하게 특징을 알아 보자.
Compass는 css를 쉽게 개발 및 편집할 수 있는 CSS Framewok이며, ruby를 이용하여 만
들어진 일종의 개발 툴이다.
Compass는 Sass를 사용하며, 확장자는 (.scss)를 사용한다.
Sass는 CSS3를 기반으로 변수 지원, 계층구조 지원, 연산과 내장함수 지원, Mixins, 선택자
상속 등의 기능이 추가되어 확장 된 구조이다.
2. Ruby 설치.
Compass를 설치 하려면, 그 이전에 Ruby를 먼저 설치해야 한다.
맥에서는 대부분 설치가 되어 있지만 그렇지 않다면 개발자용 툴을 설치하는 것도 좋다.
Ruby의 공식 사이트는 http://ruby-lang.org 이다.
공식 다운로는 사이트는 http://www.ruby-lang.org/ko/downloads/ 이곳이지만, 가능한 영
문 사이트에서 다운 받도록 하자.
Ruby 영문 다운로드 사이트 http://www.ruby-lang.org/en/downloads/
중간 쯤 내려 가면 RubyInstaller 이런 곳이 나온다. 이 곳에서 RubyInstaller download
page 을 누르면 다운로드를 받을 수 있는 페이지가 나온다.
첫 번째 버전인 Ruby 1.9.3-p125 을 다운 받아 윈도우에 설치를 한다.
설치 시, Program Files 폴더에 설치 하지 말고 설치 경로는 디폴트로 한다.
또한 Add Ruby executables to your PATH를 체크 하고 설치를 한다.
3. Compass 설치.
참고로 Compass를 설치하면 Sass는 자동적으로 설치된다.
도스 명령 프롬프트에서 아래의 명령어로 Compass를 설치한다.
C:>gem install compass
Compass까지 설치가 끝나면 Sass( .scss) 파일을 컴파일할 준비가 끝난 것이다.
맥용은 다음과 같이 진행을 하면 된다.
1. $ gem update –system
2. $ gem install compass
2. 4. Compass 명령어를 알아 보자.
compass <command> [<option>, <option>, <option>….. <option>]
command : 명령어.
clean - Remove generated files and the sass cache.
compile - Compile Sass stylesheets to CSS.
create - Create a new compass project.
init - Add compass to an existing project.
watch - Compile Sass stylesheets to CSS when they change.
config - Generate a configuration file for the provided command line options.
frameworks - List the available frameworks
grid-img - Generates a grid background image.
imports - Emit an imports suitable for passing to the sass command-line.
install - Install an extension's pattern into your compass project.
sprite - Generate an import for your sprites.
option에 대하여는 실제 명령어를 사용하면서 좀더 상세하게 다루기로 한다.
5. Compass 프로젝트 생성 사용법에 대한 실행을 하기로 하자.
첫 번째 프로젝트 생성 방법.
기본적으로 compass framework을 가지고 (.scss) 파일을 다루는 것이다. 또한 각 폴더
(project fodler, sass, stylesheet) 및 파일(config.rb, screen.scss, print.scss, ie.scss, ie.css,
print.css, screen.css)들이 기본적으로 생성이 된다.
가장 간단한 명령어는 다음과 같다.
$ compass create myproject.
다음 그림과 같이 실행이 된다. 기본적으로 사용 되는 폴더 및 파일들이 자동으로 생성된
다.
3. 다음 그림은 폴더 구조이다. 자동으로 생성된 cache folder 구조가 같이 보인다.
4. 두 번째 프로젝트 생성 방법.
--using 옵션 사용법을 알아 본다.
css framework을 어떤 것으로 사용할 것인지를 옵션으로 주는 방법이다.
이번에는 blueprint css framework을 사용하는 프로젝트 생성 방법이다.
참고로 blueprint css framework은 grid를 기반으로 하는 css framewok이다.
$ compass create myproject -–using blueprint
다음 그림과 같이 실행이 된다. 기본으로 프로젝트를 생성한 것과 다른 폴더와 파일들이
많이 생성이 된 모습이다.
다음 그림은 폴더 구조이다. 자동으로 생성된 cache folder 구조가 같이 보인다.
5. 추가된 내용을 보면 images 폴더에 grig.png 이미지 파일이 있으며, sass 폴더에 partials
폴더가 생성 되었으며, 그 폴더에 _base.scss 파일이 있다. _base.scss 파일은 blueprint에
서 사용 하는 기본적인 변수들이 선언 되어 있다.
이로서 프로젝트 생성시 필요한 css framework을 어떤 것으로 할 것인지 옵션을 주는 방
법을 알아 보았다.
세 번째 프로젝트 생성 방법.
--syntax 옵션을 사용하는 명령어를 알아 본다
이 번에는 기본 문법을 어떤 것으로 사용할지 선택을 할 수 있는 옵션에 대하여 알아 보
는 시간이다.
$ compass create myproject_base04 --syntax sass
네 번째 프로젝트 생성 방법.
이번에는 프로젝트 생성시 필요한 폴더의 구조를 원하는 이름으로 생성 하는 옵션에 대
하여 알아 본다.
옵션을 사용하는 명령어를 알아 본다.
--sass-dir "sass" 이 옵션은 sass 폴더 이름을 변경할 수 있다.
--css-dir "css" 이 옵션은 css 폴더 이름을 변경할 수 있다.
--javascripts-dir "javascript" 이 옵션은 javascript 폴더 이름을 변경할 수 있다.
--images-dir "images" 이 옵션은 images 폴더 이름을 변경할 수 있다.
다음은 프로젝트 생성시 명령어와 옵션을 주어서 원하는 폴더 및 css framework, 어떤
문법용을 사용 할 것인지 작성한 예이다.
$ compass create myproject01 --using blueprint --syntax sass --sass-dir sass01 --css-
dir css01 --javascript-dir javascript01 --images-dir images01
6. 다음 그림은 위의 조건에 맞게 생성된 폴더 구조를 보여 주는 모습이다.
지금까지 프로젝트 생성시 파일들 중 config.rd 구조를 잠시 알아 보자.
다음은 config.rb 파일의 내용이다. 지금까지 옵션으로 주었던 내용이 그대로 환경 파일
에 적용된 모습니다.
# Require any additional compass plugins here.
# Set this to the root of your project when deployed:
http_path = "/"
css_dir = "css01"
sass_dir = "sass01"
images_dir = "images01"
javascripts_dir = "javascript01"
# You can select your preferred output style here (can be overridden via the command
line):
# output_style = :expanded or :nested or :compact or :compressed
# To enable relative paths to assets via compass helper functions. Uncomment:
# relative_assets = true
# To disable debugging comments that display the original location of your selectors.
7. Uncomment:
# line_comments = false
preferred_syntax = :sass
위 파일의 내용을 보면 그 동안 실행된 옵션이 내용이 그대로 보인다.
마지막으로 기존 프로젝트에 추가를 하는 경우이다.
$ cd myproject
$ compass imstall blueprint --syntax sass
기존 프로젝트에 적용된 모습이다.
6. Compass compile 방법을 알아볼 차례이다.
컴파일 방법은 무척이나 간단하다. 3가지 정도의 방법과 옵션 사용한다.
$ cd sass
$ compass compile sass/base.scss -> 지정된 파일만 컴파일 한다.
$ compass watch sass/base.scss -> 지정된 파일만 컴파일 하는데 원본 파일이 수정이
되어 업그레이드가 되면 자동으로 해당 .scss 파일을 컴파일 하여, css 폴더에 저장 한다.
$ compass watch . -> 현재 있는 폴더의 모든 .scss 파일을 자동으로 감지 하여 css 폴더
에 저장한다.