Unix shell scripting tutorial

UNIX Shell Scripting
K. Adisesha 1
Unix Shell Scripting Tutorial
1.�Introduction
Time is precious. It is non-sense-ical to waste time typing a frequently used sequence of commands at a command prompt,
more especially if they are abnormally long or complex. Scripting is a way by which one can alleviate this necessity by
automating these command sequences in order to make ones life at the shell easier and more productive. Scripting is all
about making the computer, the tool, do the work. Hopefully by the end of this tutorial you should have a good idea of the
kinds of scripting languages available for Unix and how to apply them to your problems.
2.�Environment
Unix contains many wonderful and strange commands that can be very useful in the world of scripting, the more of the
tools you know and the better you know them, the more use you will find for them in your scripting. Most of the Unix
commands and many of the builtin commands have man pages, man pages contain the usage instructions and other stuff
pertaining to the parent tool. They are not always very clear and may require reading several times. In order to access a
man page in Unix the following command sequence is applied:
man command
If a man page exists for the command specified the internal viewer will be invoked and you will be able to read about the
various options and usage instructions etc.
3.�Shell Scripting
3.1.�Shell Scripting Introduction
Unix uses shells to accept commands given by the user, there are quite a few different shells available. The most
commonly used shells are SH(Bourne SHell) CSH(C SHell) and KSH(Korn SHell), most of the other shells you encounter
will be variants of these shells and will share the same syntax, KSH is based on SH and so is BASH(Bourne again shell).
TCSH(Extended C SHell) is based on CSH.
The various shells all have built in functions which allow for the creation of shell scripts, that is, the stringing together of
shell commands and constructs to automate what can be automated in order to make life easier for the user.
With all these different shells available, what shell should we script in? That is debatable. For the purpose of this tutorial
we will be using SH because it is practically guaranteed to be available on most Unix systems you will encounter or be
supported by the SH based shells. Your default shell may not be SH. Fortunately we do not have to be using a specific
shell in order to exploit its features because we can specify the shell we want to interpret our shell script within the script
itself by including the following in the first line.
#!/path/to/shell
Usually anything following (#) is interpreted as a comment and ignored but if it occurs on the first line with a (!)
following it is treated as being special and the filename following the (!) is considered to point to the location of the shell
that should interpret the script.
When a script is "executed" it is being interpreted by an invocation of the shell that is running it. Hence the shell is said to
be running non-interactively, when the shell is used "normally" it is said to be running interactively.
3.2.�Shell Scripting Basics
3.2.1.�Command Redirection and Pipelines
By default a normal command accepts input from standard input, which we abbreviate to stdin, standard input is the
command line in the form of arguments passed to the command. By default a normal command directs its output to
standard output, which we abbreviate to stdout, standard output is usually the console display. For some commands this
may be the desired action but other times we may wish to get our input for a command from somewhere other than stdin
and direct our output to somewhere other than stdout. This is done by redirection:

K. Adisesha 2
We use > to redirect stdout to a file, for instance, if we wanted to redirect a directory listing generated by the ls we
could do the following:
ls > file
We use < to specify that we want the command immediately before the redirection symbol to get its input from
the source specified immediately after the symbol, for instance, we could redirect the input to grep(which
searches for strings within files) so that it comes from a file like this:
grep searchterm < file
We use >> to append stdout to a file, for instance, if we wanted to append the date to the end of a file we could
redirect the output from date like so:
date >> file
One can redirect standard error (stderr) to a file by using 2>, if we wanted to redirect the standard error from
commandA to a file we would use:
commmandA 2>
Pipelines are another form of redirection that are used to chain commands so that powerful composite commands can be
constructed, the pipe symbol '|' takes the stdout from the command preceding it and redirects it to the command following
it:
ls -l | grep searchword | sort -r
The example above firsts requests a long (-l directory listing of the current directory using the ls command, the output
from this is then piped to grep which filters out all the listings containing the searchword and then finally pipes this
through to sort which then sorts the output in reverse (-r, sort then passes the output on normally to stdout.
3.2.2.�Variables
3.2.2.1.�Variables
When a script starts all environment variables are turned into shell variables. New variables can be instantiated like this:
name=value
You must do it exactly like that, with no spaces either side of the equals sign, the name must only be made up of
alphabetic characters, numeric characters and underscores, it cannot begin with a numeric character. You should avoid
using keywords like for or anything like that, the interpreter will let you use them but doing so can lead to obfuscated code
;)
Variables are referenced like this: $name, here is an example:
#!/bin/sh
msg1=Hello
msg2=There!
echo $msg1 $msg2
This would echo "Hello There!" to the console display, if you want to assign a string to a variable and the string contains
spaces you should enclose the string in double quotes ("), the double quotes tell the shell to take the contents literally and
ignore keywords, however, a few keywords are still processed. You can still use $ within a (") quoted string to include
variables:
#!/bin/sh
msg1="one"
msg2="$msg1 two"
msg3="$msg2 three"
echo $msg3
Would echo "one two three" to the screen. The escape character can also be used within a double quoted section to output
special characters, the escape character is "", it outputs the character immediately following it literally so would output
. A special case is when the escape character is followed by a newline, the shell ignores the newline character which

K. Adisesha 3
allows the spreading of long commands that must be executed on a single line in reality over multiple lines within the
script. The escape character can be used anywhere else too. Except within single quotes.
Surrounding anything within single quotes causes it to be treated as literal text that is it will be passed on exactly as
intended, this can be useful for sending command sequences to other files in order to create new scripts because the text
between the single quotes will remain untouched. For example:
#!/bin/sh
echo 'msg="Hello World!"' > hello
echo 'echo $msg' >> hello
chmod 700 hello
./hello
This would cause "msg="Hello World!" to be echoed and redirected to the file hello, "echo $msg" would then be echoed
and redirected to the file hello but this time appended to the end. The chmod line changes the file permissions of hello so
that we can execute it. The final line executes hello causing it output "Hello World". If we had not used literal quotes we
never would have had to use escape characters to ensure that ($) and (") were echoed to the file, this makes the code a
little clearer.
A variable may be referenced like so ${VARIABLENAME}, this allows one to place characters immediately preceding
the variable like ${VARIABLENAME}aaa without the shell interpreting aaa as being part of the variable name.
3.2.2.2.�Command Line Arguments
Command line arguments are treated as special variables within the script, the reason I am calling them variables is
because they can be changed with the shift command. The command line arguments are enumerated in the following
manner $0, $1, $2, $3, $4, $5, $6, $7, $8 and $9. $0 is special in that it corresponds to the name of the script itself. $1 is
the first argument, $2 is the second argument and so on. To reference after the ninth argument you must enclose the
number in brackets like this ${nn}. You can use the shift command to shift the arguments 1 variable to the left so that $2
becomes $1, $1 becomes $0 and so on, $0 gets scrapped because it has nowhere to go, this can be useful to process all the
arguments using a loop, using one variable to reference the first argument and shifting until you have exhausted the
arguments list.
As well as the commandline arguments there are some special builtin variables:
$# represents the parameter count. Useful for controlling loop constructs that need to process each parameter.
$@ expands to all the parameters separated by spaces. Useful for passing all the parameters to some other
function or program.
$- expands to the flags(options) the shell was invoked with. Useful for controlling program flow based on the
flags set.
$$ expands to the process id of the shell innovated to run the script. Useful for creating unique temporary
filenames relative to this instantiation of the script.
3.2.2.3.�Command Substitution
In the words of the SH manual “Command substitution allows the output of a command to be substituted in place of the
command name itself”. There are two ways this can be done. The first is to enclose the command like this:
$(command)
The second is to enclose the command in back quotes like this:
`command`
The command will be executed in a sub-shell environment and the standard output of the shell will replace the command
substitution when the command completes.
3.2.2.4.�Arithmetic Expansion
Arithmetic expansion is also allowed and comes in the form:
$((expression))

K. Adisesha 4
The value of the expression will replace the substitution. Eg:
!#/bin/sh
echo $((1 + 3 + 4))
Will echo "8" to stdout
3.2.3.�Control Constructs
The flow of control within SH scripts is done via four main constructs; if...then...elif..else, do...while, for and case.
3.2.3.1.�If..Then..Elif..Else
This construct takes the following generic form, The parts enclosed within ([) and (]) are optional:
if list
then list
[elif list
then list] ...
[else list]
fi
When a Unix command exits it exits with what is known as an exit status, this indicates to anyone who wants to know the
degree of success the command had in performing whatever task it was supposed to do, usually when a command
executes without error it terminates with an exit status of zero. An exit status of some other value would indicate that
some error had occurred, the details of which would be specific to the command. The commands' manual pages detail the
exit status messages that they produce.
A list is defined in the SH as "a sequence of zero or more commands separated by newlines, semicolons, or ampersands,
and optionally terminated by one of these three characters.", hence in the generic definition of the if above the list will
determine which of the execution paths the script takes. For example, there is a command called test on Unix which
evaluates an expression and if it evaluates to true will return zero and will return one otherwise, this is how we can test
conditions in the list part(s) of the if construct because test is a command.
We do not actually have to type the test command directly into the list to use it, it can be implied by encasing the test case
within ([) and (]) characters, as illustrated by the following (silly) example:
#!/bin/sh
if [ "$1" = "1" ]
then
echo "The first choice is nice"
elif [ "$1" = "2" ]
then
echo "The second choice is just as nice"
elif [ "$1" = "3" ]
then
echo "The third choice is excellent"
else
echo "I see you were wise enough not to choose"
echo "You win"
fi
What this example does is compare the first parameter (command line argument in this case) with the strings "1", "2" and
"3" using tests' (=) test which compares two strings for equality, if any of them match it prints out the corresponding
message. If none of them match it prints out the final case. OK the example is silly and actually flawed (the user still wins
even if they type in (4) or something) but it illustrates how the if statement works.
Notice that there are spaces between (if) and ([), ([) and the test and the test and (]), these spaces must be present
otherwise the shell will complain. There must also be spaces between the operator and operands of the test otherwise it

K. Adisesha 5
will not work properly. Notice how it starts with (if) and ends with (fi), also, notice how (then) is on a separate line to the
test above it and that (else) does not require a (then) statement. You must construct this construct exactly like this for it to
work properly.
It is also possible to integrate logical AND and OR into the testing, by using two tests separated by either "&&" or "||"
respectively. For example we could replace the third test case in the example above with:
elif [ "$1" = "3"] || [ "$1" = "4" ]
then echo "The third choi...
The script would print out "The third choice is excellent" if the first parameter was either "3" OR "4". To illustrate the use
of "&&" we could replace the third test case with:
elif [ "$1" = "3"] || [ "$2" = "4" ]
then echo "The third choi...
The script would print out "The third choice is excellent" if and only if the first parameter was "3" AND the second
parameter was "4".
"&&" and "||" are both lazily evaluating which means that in the case of "&&", if the first test fails it wont bother
evaluating the second because the list will only be true if they BOTH pass and since one has already failed there is no
point wasting time evaluating the second. In the case of "||" if the first test passes it wont bother evaluating the second test
because we only need ONE of the tests to pass for the whole list to pass. See the test manual page for the list of tests
possible (other than the string equality test mentioned here).
3.2.3.2.�Do...While
The Do...While takes the following generic form:
while list
do list
done
In the words of the SH manual "The two lists are executed repeatedly while the exit status of the first list is zero." there is
a variation on this that uses until in place of while which executes until the exit status of the first list is zero. Here is an
example use of the while statement:
#!/bin/sh
count=$1 # Initialise count to first parameter
while [ $count -gt 0 ] # while count is greater than 10 do
do
echo $count seconds till supper time!
count=$(expr $count -1) # decrement count by 1
sleep 1 # sleep for a second using the Unix sleep command
done
echo Supper time!!, YEAH!! # were finished
If called from the commandline with an argument of 4 this script will output
4 seconds till supper time!
Supper time!!, YEAH!!
You can see that this time we have used the -gt of the test command implicitly called via '[' and ']', which stands for
greater than. Pay careful attention to the formatting and spacing.
3.2.3.3.�For
The syntax of the for command is:

K. Adisesha 6
for variable in word ...
do list
done
The SH manual states “The words are expanded, and then the list is executed repeatedly with the variable set to each word
in turn.”. A word is essentially some other variable that contains a list of values of some sort, the for construct assigns
each of the values in the word to variable and then variable can be used within the body of the construct, upon completion
of the body variable will be assigned the next value in word until there are no more values in word. An example should
make this clearer:
#!/bin/sh
fruitlist="Apple Pear Tomato Peach Grape"
for fruit in $fruitlist
do
if [ "$fruit" = "Tomato" ] || [ "$fruit" = "Peach" ]
then
echo "I like ${fruit}es"
else
echo "I like ${fruit}s"
fi
done
In this example, fruitlist is word, fruit is variable and the body of the statement outputs how much this person loves
various fruits but includes an if...then..else statement to deal with the correct addition of letters to describe the plural
version of the fruit, notice that the variable fruit was expressed like ${fruit} because otherwise the shell would have
interpreted the preceding letter(s) as being part of the variable and echoed nothing because we have not defined the
variables fruits and fruites When executed this script will output:
I like Apples
I like Pears
I like Tomatoes
I like Peachs
I like Grapes
Within the for construct, do and done may be replaced by '{' and '}'. This is not allowed for while.
3.2.3.4.�Case
The case construct has the following syntax:
case word in
pattern) list ;;
...
esac
An example of this should make things clearer:
!#/bin/sh
case $1
in
1) echo 'First Choice';;
2) echo 'Second Choice';;
*) echo 'Other Choice';;
esac

K. Adisesha 7
"1", "2" and "*" are patterns, word is compared to each pattern and if a match is found the body of the corresponding
pattern is executed, we have used "*" to represent everything, since this is checked last we will still catch "1" and "2"
because they are checked first. In our example word is "$1", the first parameter, hence if the script is ran with the
argument "1" it will output "First Choice", "2" "Second Choice" and anything else "Other Choice". In this example we
compared against numbers (essentially still a string comparison however) but the pattern can be more complex, see the SH
man page for more information.
3.2.4.�Functions
The syntax of an SH function is defined as follows:
name ( ) command
It is usually laid out like this:
name() {
commands
}
A function will return with a default exit status of zero, one can return different exit status' by using the notation return
exit status. Variables can be defined locally within a function using local name=value. The example below shows the use
of a user defined increment function:
Example�1.�Increment Function Example
#!/bin/sh
inc() { # The increment is defined first so we can use it
echo $(($1 + $2)) # We echo the result of the first parameter plus the second parameter
}
# We check to see that all the command line arguments are present
if [ "$1" "" ] || [ "$2" = "" ] || [ "$3" = "" ]
then
echo USAGE:
echo " counter startvalue incrementvalue endvalue"
else
count=$1 # Rename are variables with clearer names
value=$2
end=$3
while [ $count -lt $end ] # Loop while count is less than end
do
echo $count
count=$(inc $count $value) # Call increment with count and value as parameters
done # so that count is incremented by value
fi
inc() {
echo $(($1 + $2))
}
The function is defined and opened with inc() {, the line echo $(($1 + $2)) uses the notation for arithmetic
expression substitution which is $((expression)) to enclose the expression, $1 + $2 which adds the first and second
parameters passed to the function together, the echo bit at the start echoes them to standard output, we can catch this
value by assigning the function call to a variable, as is illustrated by the function call.
count=$(inc $count $value)

K. Adisesha 8
We use command substitution which substitutes the value of a command to substitute the value of the function call
whereupon it is assigned to the count variable. The command within the command substitution block is inc $count
$value, the last two values being its parameters. Which are then referenced from within the function using $1 and
$2. We could have used the other command substitution notation to call the function if we had wanted:
count=`inc $count $value`
We will show another quick example to illustrate the scope of variables:
Example�2.�Variable Scope, Example
#!/bin/sh
inc() {
local value=4
echo "value is $value within the functionn"
echo "b$1 is $1 within the function"
}
value=5
echo value is $value before the function
echo "$1 is $1 before the function"
echo
echo -e $(inc $value)
echo
echo value is $value after the function
echo "$1 is $1 after the function"
inc() {
local value=4
}
We assign a local value to the variable value of 4. The next three lines construct the the output we would like,
remember that this is being echoed to some buffer and will be replace the function call with all the stuff that was
passed to stdout within the function when the function exits. So the calling code will be replaced with whatever we
direct to standard output within the function. The function is called like this:
echo -e $(inc $value)
We have passed the option -e to the echo command which causes it to process C-style backslash escape characters,
so we can process any backslash escape characters which the string generated by the function call contains.
If we just echo the lines we want to be returned by the function it will not pass the newline character onto the
buffer even if we explicitly include it with an escape character reference so what we do is actually include the
sequence of characters that will produce a new line within the string so that when it is echoed by the calling code
with the -e the escape characters will be processed and the newlines will be placed where we want them.
Notice how the newline has been inserted with n, the first two backslashes indicate that we want to echo a
backslash because within double quotes a backslash indicates to process the next character literally, we have to do
this because we are only between double quotes and not the literal-text single quotes. If we had used single quotes
we would had have to echo the bit with the newline in separately from the bit that contains $value otherwise $value
would not be expanded.

K. Adisesha 9
This is our second line, and is contained within double quotes so that the variable $1 will be expanded, b is
included so that b will be placed in the echoed line and our calling code will process this as a backspace character.
We have to do this because for some reason the shell prefixes a space to the second line if we do not, the backspace
removes this space.
The output from this script called with 2 as the first argument is:
value is 5 before the function
$1 is 2 before the function
value is 4 within the function
$1 is 5 within the function
value is 5 after the function
$1 is 2 after the function
You can use ". DIRECTORY/common.sh" to import functions from a script called common.sh in DIRECTORY, a
quick example is shown below, first is test.sh:
#!/bin/sh
. ./common.sh
if [ "$1" = "" ]; then
echo USAGE:
echo "sh test.sh type"
exit
fi
if `validtype $1`; then
echo Valid type
else
echo Invalid type
fi
Here is common.sh:
#!/bin/sh
validtype() {
if [ "$1" = "TYPEA" ] ||
[ "$1" = "TYPEB" ] ||
[ "$1" = "TYPEC" ] ||
[ "$1" = "TYPED" ] ||
[ "$1" = "TYPEE" ];
then
exit 0
else
exit 1
fi
}

Unix shell scripting tutorial

Related slideshows

More Related Content

Unix shell scripting tutorial