Time Orient Multi Attribute Sensor Selection Technique For Data Collection In Wireless Sensor Networks

International Journal of Engineering Science Invention
ISSN (Online): 2319 – 6734, ISSN (Print): 2319 – 6726
www.ijesi.org ||Volume 4 Issue 10|| October 2015 || PP.53-59
www.ijesi.org 53 | Page
Time Orient Multi Attribute Sensor Selection Technique For
Data Collection In Wireless Sensor Networks
1
S.RAJESWARI , 2
Dr. P.PONMUTHURAMALINGAM
1
Ph.D. Research Scholar, Department of Computer Science (KarpagamUniversity), Coimbatore, Taminadu,
India.
2
Associate Professor&Head, Department of Computer Science, Government Arts College (Autonomous),
Coimbatore, Tamilnadu, India.
ABSTRACT: The problem of data collection in wireless sensor network has been studied in many situations
and there are many approaches has been discussed for the data collection in wireless sensor network. The
earlier methods suffers with the problem of poor accuracy, latency and data redundancy. To overcome the
problems identified, the author proposes a time orient multi attribute sensor selection technique to perform data
collection in wireless sensor networks. The method identifies the list of nodes which groups the required/recent
data and from the list of nodes the method selects subset of nodes which has more recent data to be updated.
The selection of subset of nodes is performed using the time orient multi attribute sensor selection technique,
which selects the subset of nodes based on the many factors like time, amount of data, relevancy of data and so
on. Using the above mentioned factors the method computes the data availability factor to choose the few nodes
of sensor which reduces the energy depletion in the network. The proposed method improves the performance of
data collection in wireless sensor networks and reduces the time complexity also.
Index Terms:
Wireless Sensor Networks, Data Collection, Sensor Selection, Time Orient Approach.
I. INTRODUCTION
Wireless sensor networks is the collection of large number of sensor nodes and the nodes of network
are capable of sense and relay the data packets in the network. The basic application of the wireless sensor
networks is to collect many information in warfield where the information from the war troops at different
location has to be collected, so that the decision about the war field can be taken. The wireless sensor networks
can be deployed in rapid manner and they have great impact in war field data collection.
The data collection in wireless sensor network can be performed in many ways. The routing methods
are used to route the data collection information to forward the data packets towards the sink node. The data
collection can be performed with the help cluster based routing if the nodes are grouped into number of clusters.
Also layer based approaches can also be used to perform data collection. In this paper, the author focuses about
the data collection and sensor selection only and not about the routing strategies.
There may be number of nodes which posses the updated data and if the nodes of the network is
considered as layers then the data collection is performed based on layered approach only. If the WSN is
visualized in layered manner, then the data collection is performed in time slot based approach. According to
the assumption, not all the nodes has the updated data at each time window. Some of the nodes may have
enough information and some of them may not. So collecting data from all the nodes at all time window will not
be efficient. So for the data collection, the sensor selection technique has to be used. For the sensor selection the
method has to consider the data availability, time of last data collection, data relevancy. Using the above
mentioned factors of sensor nodes has to be considered while selecting the sensor node for the data collection.
Time orient approach is one which performs data collection at different time window with constant
interval. The approach performs data collection in the nodes of WSN and selects a sub set of nodes from the
network and collects data from that. The time orient approach helps collecting data in the wireless sensor
network in efficient manner with higher accuracy and throughput.
II. RELATED WORKS:
There are number of data collection methods have been discussed for the wireless sensor networks and
we discuss about the few of them in this section.
An Efficient Data Aggregation Scheme in Wireless Sensor Networks [1], proposed an automatic time
series modeling based data aggregation scheme in wireless sensor networks. The main idea behind this scheme
is to decrease the number of transmitted data values between sensor nodes and aggregator by using time series
prediction model. The proposed scheme can effectively save the precious battery energy of wireless sensor node

Time Orient Multi Attribute Sensor…
while keeping the predicted data values of aggregator within application defined error threshold. We show
through experiments with real data that the predicted values of our proposed scheme fit the real sensed values
very well and fewer messages are transmitted between sensor node and aggregator.
A Graph-Center-Based Scheme for Energy-Efficient Data Collection in Wireless Sensor Networks [3],
propose a data collection scheme for the WSN, based on the concept of the center of the graph in graph theory.
The purpose of the scheme is to use less power in the process of data collection. Because it is mostly true that
the sensors of WSN are powered by batteries, power saving is an especially important issue in WSN. The
energy-saving scheme, and provide the experimental results. It is shown that under the energy consumption
model used in the paper, the proposed scheme saves about 20% of the power collecting data from sensors.
Approximate Self-Adaptive Data Collection in Wireless Sensor Networks [4], propose an Approximate
Self-Adaptive data collection technique (ASA), to approximately collect data in a distributed wireless sensor
network. ASA investigates the spatial correlations between sensors to provide an energy-efficient and balanced
route to the sink, while each sensor does not know any global knowledge on the network. Based on our synthetic
experiences, we demonstrate that ASA can provide significant communication (and hence energy) savings and
equal energy consumption of the sensor nodes.
A Feedback-Based Secure Path Approach for Wireless Sensor Networks Data Collection [8], a novel
tracing-feedback mechanism, which makes full use of the routing functionality of WSN, to improve the quality
of data collection. The algorithms of the approach are easy to be implemented and performed in WSN. We also
evaluate the approach with a simulation experiment and analyze the simulation results in detail. We illustrate
that the approach is efficient to support secure data collection in wireless sensor network.
Optimizing Data Collection for Object Tracking in Wireless Sensor Networks [9], to optimize an
algorithm of object tracking in wireless sensor network (WSN). The task under consideration is to control
movement of a mobile sink, which has to reach a target in the shortest possible time. Utilization of the WSN
resources is optimized by transferring only selected data readings (target locations) to the mobile sink.
Simulations were performed to evaluate the modifications against state-of-the-art methods. The obtained results
show that the presented tracking algorithm allows for substantial reduction of data collection costs with no
significant increase in the amount of time that it takes to catch the target.
Data collection is one of the main research topics of wireless sensor networks in recent years, and, data
collection research outside users through wireless sensor networks to collect perception data from the
monitoring area. Formal concept analysis is a data analysis tool, especially for investigation and treatment can
be given information to discover important information hidden in the data behind. The Design of Data
Collection Methods in Wireless Sensor Networks Based on Formal Concept Analysis [11], the data collection
methods in Wireless Sensor Networks based on formal concept analysis. Experiments show that the FCA-based
data collection algorithm in WSN more effective than the traditional algorithm.
Optimization of Wireless Sensor Network and UAV Data Acquisition [12], deals with selection of
sensor network communication topology and the use of Unmanned Aerial Vehicles (UAVs) for data gathering.
The topology consists of a set of cluster heads that communicate with the UAV. In conventional wireless sensor
networks Low Energy Adaptive Clustering Hierarchy (LEACH) is commonly used to select cluster heads in
order to conserve energy. Energy conservation is far more challenging for large scale deployments. Particle
Swarm Optimization (PSO) is optimization method to find the optimal topology in order to reduce the energy
consumption, Bit Error Rate (BER), and UAV travel time. PSO is compared to LEACH using a simulation case
and the results show that PSO outperforms LEACH in terms of energy consumption and BER, while the UAV
travel time is similar.
Data collection model for energy-efficient wireless sensor networks [14], deal with real life scenarios
for wireless sensor networks with uneven contours, connectivity issues, and dropping packets, heterogeneous
sensors became the vital factor to enhance its capability in terms of energy efficiency and end-to-end packet
delay. In recent times, end-to-end packet delay has a significant role in wireless sensor networks along with
energy efficiency and network lifetime. In the present situation, the information delayed is information lost, and
hence, end-to-end packet delay is playing an important role in wireless sensor networks. To address the issue of
end-to-end packet delay in wireless sensor network, a mobile cluster-head data collection model for
heterogeneous wireless sensor networks has been evaluated. In this paper, the mobile cluster-head data
collection model has been evaluated for two different scenarios. This paper also illustrates the velocity of the
cluster-head node with which it should move to reduce the end-to-end packet delay.
Many-to-Many Data Collection for Mobile Users in Wireless Sensor Networks [15], a hop-count based
data collection architecture together with an efficient mobility management scheme. On the other side, sensing
results from a large number of sensors are sent to multiple sinks, which causes lots of packet transmissions. To
resolve this problem, we combine the idea of multicast and data aggregation. We first prove that the optimal
multicast decision is a NP-hard problem and then distributed heuristic solution. In addition, we further integrate
data aggregation into multicast and distributed many-to-many aggregation mechanism.

Total Data Collection Algorithm Based on Estimation Model for Wireless Sensor Network [16],
estimation model for different target parameter types, proposing intra cluster scheduling/routing algorithm for
collecting data inside the clusters according to the estimation model requirements and proposing inter cluster
routing in order to transmit the estimation process results to the sink. According to the inherent characteristics of
WSN applications, we consider the unknown target parameter as a random variable with a known prior
distribution function. Based on the application, different prior functions are admissible. In this paper we
investigate the impact of different prior functions on estimation process performance. Simulation results show
that the algorithm achieves its goals.
RoCoCo: Receiver-Initiated Opportunistic Data Collection and Command Multicasting for WSNs [17],
combines data collection and dissemination by extending the low-energy ORiNoCo collection protocol by
means to reconfigure subsets of nodes during runtime. Synergistically leveraging existing message types,
RoCoCo allows for the definition of multicast recipient groups and forwards commands to these groups in an
opportunistic fashion. Relying on Bloom filters to define the recipient addresses, RoCoCo only incurs small
memory and energy overheads. We confirm its feasibility by evaluating the introduced delays, command
success rates, and its energy overhead in comparison to existing collection/dissemination protocols.
A Multi-objective Approach for Data Collection in Wireless Sensor Networks [13], addresses the
problem of data collection using mobile sinks in a WSN. We provide a framework that studies the trade-off
between energy consumption and delay of data collection. This framework provides solutions that allow
decision makers to optimally design the data collection plan in wireless sensor networks with mobile sinks.
All the above discussed approaches has the problem of energy depletion and latency which has to be
reduced to maximize the lifetime and energy of the sensor nodes.
III. TIME ORIENT MULTI ATTRIBUTE SENSOR SELECTION TECHNIQUE:
The time orient multi attribute sensor selection technique identifies the list of sensor nodes which
groups the data. At each time window the method selects list of nodes which has more appropriate data and
relevant information. Based on identified nodes the method selects a small set of sensor nodes from where the
data can be fetched. The method computes time orient data availability factor using which the method selects a
small set of sensor nodes from where the data collection can be performed. The entire process can be split into
number of stages namely: Source Discovery, Time orient multi attribute sensor selection, and Data Collection.
This section explains each steps of the proposed method in detail.
3.1 Source Discovery:
The source discovery is the initial process of data collection and the method identifies the list of sensor
which posses the data. The wireless sensor nodes has limited energy and the method identifies the list of nodes
which has data to be collected using the Data Discovery Request Message. First the sink node floods the DDR
message and receives the replies from all the nodes of the network. From the reply being received the node
extracts the list of nodes has information to be collected. By receiving the data discovery request message
replies with the message about the data content or forwards the message to its neighbors. once all the reply
being received then the method extracts the list of nodes and the sink collects the route information from the
reply being received.
Algorithm:
Input: Null
Output: Node List Nl, Route Table Rt
Start
Initialize Node List Nl.
Generate DDR Message.
Broadcast DDR Message.
Initialize Broadcast Timer Bt.
while Bt is running
Receive DDREP message.
if DDREP.DNode==True then
Add NodeId to Node List Nl.
Nl = (𝑁𝑜𝑑𝑒𝑠 ∈ 𝑁𝑙) ∪ 𝑁𝑜𝑑𝑒𝐼𝑑
Extract the route to reach the node.
Rt = 𝑅𝑜𝑢𝑡𝑒𝑠 ∈ 𝑅𝑡 ∪ 𝐷𝐷𝑅𝐸𝑃. 𝑅𝑖
End
End
Stop.
The above discussed algorithm computes the available routes and the nodes which has the data to be
collected using DDR messages.

3.2 Time Orient Data Availability Estimation:
At this stage the method computes the data availability factor for each of the data sensors at each time
window. The method uses time, data collected, relevancy factors to compute the data availability factor. Not all
the nodes has the required information at all the time window, so to reduce the overhead of data collection, the
method computes the data availability factor for each of the data sensor and based on the value of data
availability factor the method selects the subset of nodes from where the data can be collected.
Algorithm:
Input: Node ID Nid, Data Collection Trace DCT
Output: Data Availability Factor DAF.
Start
Read the data collection trace.
Extract the trace belongs to the Node Nid.
Data Trace DT = 𝐷𝐶𝑇 𝑖 . 𝑁𝑖𝑑 == 𝑁𝑖𝑑
𝑠𝑖𝑧𝑒 (𝐷𝐶𝑇)
𝑖=1
Compute average data received Adr =
𝐷𝑇 𝑖 .𝐷𝑎𝑡𝑎𝐿𝑒𝑛𝑔𝑡 ℎ
𝑠𝑖𝑧𝑒 (𝐷𝑇 )
𝑖=1
𝑆𝑖𝑧𝑒 (𝐷𝑇)
Compute the data reception at last time window DRlast.
DRlast = DCT(Ti-1).DataLength.
If Adr>=DRlast Then
DAF= 𝐴𝑑𝑟
µ
µ - data rate constant .
Else
DAF=Adr×µ
End
Return DAF.
Stop.
The above discussed algorithm computes the data availability factor for specific node. The computed
disease availability factor will be used in the next stage to perform data collection in the wireless sensor
networks.
3.3 Data Collection:
The data collection is performed base on the time orient multi attribute sensor selection approach. The
method first computes the data availability factor for each of the node from where the data has to be collected.
Then the method performs node selection based on computed DAF value, relevancy of data. The method
computes the data relevancy based on the trace available in the data collection trace. Using computed data
relevancy and DAF values, the method computes the depthness measure for each node. Based on depthness
measure the method selects a subset of nodes from where the data has to be collected.
Algorithm:
Input: Data Collection Trace DCT, Node List Nl.
Output: Data Collection Set DCS.
Start
for each time window Ti from Tw
for each node Ni from Nl

Compute Data Availability Estimation.
DAF = Data-Availability-Estimation(Ni, DCT).
Compute Data Relevancy DRF.
DRF = 𝐷𝐶𝑇 𝑁𝑖 . 𝑆𝑡𝑎𝑡𝑢𝑠 == 𝑇𝑟𝑢𝑒
𝑆𝑖𝑧𝑒(𝐷𝐶𝑇 𝑁𝑖 )
Compute Depthness measure DM = DAF×DRF.
if DM>Th then
Add node to Data Collection Set DCS.
DCS = 𝑁𝑜𝑑𝑒𝑠(𝐷𝐶𝑆) ∪ 𝑁𝑖
End
End
End
Stop.
The above discussed algorithm compute depthness measure for each of the node based on which the
method selects a subset of nodes to perform data collection.
IV. RESULTS AND DISCUSSION:
The proposed time orient multi attribute sensor selection approach for data collection approach has
been implemented and evaluated for its efficiency using different scenarios. The method has been evaluated for
its efficiency in data collection. The method has produced efficient results in data collection as well as in other
factors like time complexity, latency and energy efficiency with lifetime maximization.
Parameter Value
Simulation Platform Advanced Java
Simulation Area 1000×1000 meters
Number of nodes 200
Transmission Range 100 meters
Table 1: Details of simulation of proposed protocol
The Table 1, shows the details of simulation being used to evaluate the performance of the
proposed approach.
The graph1, shows the accuracy of data collection, where it clearly shows that the proposed
approach has performed data collection with higher accuracy than earlier methods.

Graph4 : Time complexity of different approaches
The graph 4 shows the time complexity produced by various methods in data collection where the
number of data sensors is more than 20 and it shows clearly that the proposed approach has produced less time
complexity than other methods.
0
20
40
60
80
100
Self Adaptive Graph Based Feed Back Proposed
Timetakeninmsec
Time Complexity

V. CONCLUSION:
We proposed a novel time orient multi attribute sensor selection technique to perform data collection in
wireless sensor networks. The proposed method collects the set of data sensor present in the entire network
using data discovery request message. From the reception of data discovery reply message the method identifies
a list of data sensor nodes. For each time window the method computes the data availability factor for each data
sensor and compute the depthness measure to select the subset of nodes from where the data collection has to be
performed. The proposed method has produced efficient results in all the factors considered and reduces the
energy depletion and improves the lifetime and data collection accuracy. Also the proposed method reduces the
time complexity of the network also.
REFERENCES:
[1] Ying Wang, Guorui Li, An Efficient Data Aggregation Scheme in Wireless Sensor Networks, springer, Internet of Things
Communications in Computer and Information Science Volume 312, 2012, pp 25-32.
[2] Xu, H., Huang, L., Zhang, Y., Huang, H., Jiang, S., Liu, G.: Energy-efficient Cooperative Data Aggregation for Wireless Sensor
Networks. Journal of Parallel and Distributed Computing 70, 953–961 (2010).
[3] Dajin Wang, A Graph-Center-Based Scheme for Energy-Efficient Data Collection in Wireless Sensor Networks, Springer,
Mobile Ad-hoc and Sensor NetworksLecture Notes in Computer Science Volume 4325, 2006, pp 579-587.
[4] Bin Wang, Xiaochun Yang, WanyuZang, Meng Yu, Approximate Self-Adaptive Data Collection in Wireless Sensor
Networks, Wireless Algorithms, Systems, and ApplicationsLecture Notes in Computer Science Volume 8491, 2014, pp 564-575.
[5] Li, Z., Liu, Y., Li, M., Wang, J., Cao, Z.: Exploiting ubiquitous data collection for mobile users in wireless sensor networks.
IEEE Trans. Parallel Distrib. Syst. 24(2), 312–326 (2013) CrossRef
[6] Wang, C., Ma, H.: Data collection in wireless sensor networks by utilizing multiple mobile nodes. Ad Hoc & Sensor Wireless
Networks 18(1), 65–85 (2013)
[7] Wang, C., Ma, H., He, Y., Xiong, S.: Adaptive approximate data collection for wireless sensor networks. IEEE Trans. Parallel
Distrib. Syst. 23(6), 1004–1016 (2012)
[8] Yuxin Mao, A Feedback-Based Secure Path Approach for Wireless Sensor Networks Data Collection, Springer, Advanced
Communication and NetworkingCommunications in Computer and Information Science Volume 77, 2010, pp 56-63.
[9] BartłomiejPłaczek, MarcinBernaś, Optimizing Data Collection for Object Tracking in Wireless Sensor Networks, Springer,
Computer Networks Communications in Computer and Information Science Volume 370, 2013, pp 485-494.
[10] Płaczek, B.: Uncertainty-dependent data collection in vehicular sensor networks. In: Kwiecień, A., Gaj, P., Stera, P. (eds.) CN
2012. CCIS, vol. 291, pp. 430–439. Springer, Heidelberg (2012)
[11] Yi Wang, Jian Zhang, HongShengXu, The Design of Data Collection Methods in Wireless Sensor Networks Based on Formal
Concept Analysis, Springer, Advances in Computer Science and Information Engineering Advances in Intelligent and Soft
Computing Volume 169, 2012, pp 33-38.
[12] Dac-Tu Ho, EstenIngarGrøtli, P. B. Sujit, Tor Arne Johansen, Optimization of Wireless Sensor Network and UAV Data
Acquisition, Journal of Intelligent & Robotic SystemsApril 2015, Volume 78, Issue 1, pp 159-179
[13] João Borges SousaChristelleCaillouet, Xu Li, TahiryRazafindralambo, A Multi-objective Approach for Data Collection in
Wireless Sensor Networks, Springer, Ad-hoc, Mobile, and Wireless Networks Lecture Notes in Computer Science Volume 6811,
2011, pp 220-233.
[14] NidhiGautam, SanjeevSofat, RenuVig, Data collection model for energy-efficient wireless sensor networks, Springer, annals of
telecommunications - annales des télé communications July 2015
[15] Chi-Fu Huang, Wei-Chen Lin, Many-to-Many Data Collection for Mobile Users in Wireless Sensor Networks, Springer,
Advanced Multimedia and Ubiquitous Engineering Lecture Notes in Electrical Engineering Volume 352, 2015, pp 143-148
[16] Amir HosseinMohajerzadeh, Mohammad HosseinYaghmaee, VahidFakoor, Total Data Collection Algorithm Based on
Estimation Model for Wireless Sensor Network, Wireless Personal CommunicationsMarch 2015, Volume 81, Issue 2, pp 745-
778
[17] Andreas Reinhardt, Christian Renner, RoCoCo: Receiver-Initiated Opportunistic Data Collection and Command Multicasting
for WSNs, Springer, Wireless Sensor NetworksLecture Notes in Computer Science Volume 8965, 2015, pp 218-233

Time Orient Multi Attribute Sensor Selection Technique For Data Collection In Wireless Sensor Networks

Related slideshows

More Related Content

Time Orient Multi Attribute Sensor Selection Technique For Data Collection In Wireless Sensor Networks