This document provides information about the craft of batik printing including:
- Batik involves applying wax in a resist pattern on cloth before dyeing, so the waxed areas remain the original color.
- Batik originated in India and is also practiced in countries like Indonesia, Malaysia, and Nigeria.
- In India, batik has a history of over 2000 years and was originally done with rice starch and wax.
- Famous regions for Indian batik include Gujarat, Rajasthan, West Bengal, Andhra Pradesh, and Maharashtra.
- The basic materials used are cotton/silk fabric, paraffin wax, and dyes. Tools include wooden blocks, brushes,
2. INTRODUCTION
The word batik actually means 'wax
writing'. It is a way of decorating
cloth by covering a part of it with a
coat of wax and then dyeing the
cloth. The waxed areas keep their
original colour and when the wax is
removed the contrast between the
dyed and undyed areas makes the pattern.
Batik is a technique of wax-resist dying applied to whole cloth, or
cloth made using this technique. Batik is made either by drawing
dots and lines of the resist with a spouted tool called a canting. A
tradition of making batik is found in various countries, including
Indonesia, Malaysia, Singapore, India, Sri Lanka, Philippines and
Nigeria.
3. HISTORY
The beauty of batik lies in its simplicity and the fact that one need not
be an artist to achieve results. Some of the best effects in batik are
often achieved by chance. The history of Indian batik can be traced as
far back as 2000 years. Indians were conversant with the resist
method of printing designs on cotton fabrics long before any other
nation had even tried it. Rice starch and wax were initially used for
printing on fabrics. It is believed that after initial popularity of batik in
the past, the tedious process of dyeing and waxing caused the decline
of batik in India till recent times. Batik is very often considered a craft
like ceramics, pottery or even needlework. Although it is a household
word all over the world, it is still overlooked by art critics who do not
consider it an art form. There are several countries known for their
batik creations, starting with India where it originated. After that it
moved to Indonesia, Malaysia, Sri Lanka, Thailand and the West.
5. REGIONS
The revival of batik in India began in the 20th century when it was
introduced as a subject at the famous University of Shantiniketan in Kolkata.
In the south, near Chennai, the well-known artist's village of Chola-Mandal is
where batik gets an artistic touch. Batik that is produced in Chennai is known
for its original and vibrant designs.
Batik printing is done in:
• Gujarat: Block and Hand Batik
• Rajasthan: Block and Hand Batik
• Kolkata
• Andhra Pradesh: Kalamkari Batik
• Maharashtra
• Madhya Pradesh
Batik printing can be done anywhere but each area and region has its own
specialty in designs and colors.
6. RAW MATERIAL USED
i) Cotton or silk cloth is
used for batik
(synthetic materials are
generally not used).
ii) Paraffin wax is used
in the process.
iii) Dyes -Napthol, Direct
and Vat dyes are all used in
the dyeing process
iv) Firewood and kerosene
for heating the wax
7. TOOLS
i) Wooden blocks for printing
ii) Vessel to heat wax in
iii) Plastic bucket or big bowls to mix colors
iv) A frame/ table to fix the cloth (table has
sand on it so the wax does not spread)
v) Brushes for making free-hand designs. These
brushes can be used only for waxing.
8. PROCESS
Step 1: Cotton fabric is bleached (with bleaching powder and
water) and kept overnight for whiteness. This process is done by
machine or manually.
Step 2: Wax printing is done either
with the hand, using a brush or
with the blocks The table on which
printing is done is kept cool with
sand and water so that the wax
does not spread and the design
stays consistent throughout.
paraffin wax is melted and kept on
the stove .
Step 3: After the initial printing, the fabric is dipped in a color
fixer.
9. Step4: The fabric is then dipped in
napthol dye for 10-15 minutes.
Step5: If only a single colour is required,
then after this the cloth can be dipped in
hot water so that the wax comes off and
one gets the required pattern and colour.
Step 6: If any white spots are left and one
doesn’t want that, then the fabric could
be dipped once more in any direct dye
(say yellow). This process is called
‘topping’.
Step 7: If one wants more patterns and
colors, reprinting could be done with wax
and the whole process is repeated again.
11. BATIK IN MARKET
From a handicraft, batik has acquired the status of an art. Batik is a
versatile medium that can become an ideal hobby for an amateur
or a medium of expression for an artist. As an art form it is quite
spontaneous and one can open up new vistas of creative form.
Until recently, batik was made for dresses and tailored garments
only but modern batik is livelier and brighter in the form of
murals, wall hangings, paintings, household linen and scarves. It
has been introduced in many areas as a source of income
generation where there isn’t a sustainable source of livelihood.
The market has increased in the last decade and there is more
product diversification and one can see batik on clothes, home
furnishings, fabric and paintings. Beads and mirrors are also added
to the fabric to give it a more decorative look. Sales are good in
metros like Mumbai, Bangalore and Delhi and other cities like
Baroda and Ahmadabad.
12. NAME: Shri Ramswaroop Sharma
ADDRESS: Nr. Sitaram ji Temple, Gopalpura, Jaipur
PHONE NO. : 9928558081
MASTER CRAFTSMAN/
ARTISAN DETAILS