05 interface appended characteristic configuration
•
1 like•475 views
The document discusses configuring port rate limits on a switch to restrict the discharge velocity of ports. It describes using commands like "configure", "interface", and "switchport rate-limit band" in different modes to set a bandwidth limit on ingress or egress traffic for a port. Bandwidths of 1Gbps, 100Mbps, and 10Mbps are given as examples for negotiating port time.
Report
Share
05 interface appended characteristic configuration
- 1. The port additional characteristic install -I-
- 2. Catalogue Chapter 1 The port limits soon.............................................................................................................................................. 1 1.1 Install the velocity restriction of the port discharge................................................................................................ 1 - II -
- 3. Port added characteristic configuration Chapter 1 The port limits soon 1.1 Install the velocity restriction of the port discharge Pass the allocation can limit the discharge velocity of port import and export. Get into the privilege mode descends an usage an underneath of the order limit port of discharge velocity. Each band at the port negotiate into a 1 G of time is a 256 kpbses, port's negotiating into the time with 100 Ms is a 51.2 kpbses, the port negotiates into the time with 10 Ms is 5.12 kbpses. command purpose configure In global mode interface g0/1 Enter the port which will be configurated. [no] switchport rate-limit band The discharge velocity which installs a port { ingress|egress} limit. Band for want to limit of discharge velocity. The ingress means to rise a function to the entrance; The egress means to rise a function to the exit. exit Back to global mode. exit Back to EXEC. -1-