Proxy servers sit between an internal network and an external network. They act as an intermediary for requests from the internal users to hide their IP addresses and improve security. Proxy servers terminate TCP connections, caching frequently requested files to improve performance, and can filter content to enforce security policies. They provide anonymity and security for internal users while allowing access to external networks and resources.
2. Proxy Servers
• Part of an overall Firewall strategy
• Sits between the local network and the external network
• Originally used primarily as a caching strategy to minimize outgoing URL
requests and increase perceived browser performance
• Primary mission is now to insure anonymity of internal users
• Still used for caching of frequently requested files
• Also used for content filtering
• Acts as a go-between, submitting your requests to the external network
• Requests are translated from your IP address to the Proxy’s IP address
• E-mail addresses of internal users are removed from request headers
• Cause an actual break in the flow of communications
3. Security Advantages
• Terminates the TCP connection before relaying to target host (in and out)
• Hide internal clients from external network
• Blocking of dangerous URLs
• Filter dangerous content
• Check consistency of retrieved content
• Eliminate need for transport layer routing between networks
• Single point of access, control and logging
4. TCP Connection Termination
• Both the outgoing and incoming TCP connections are terminated
• prevents a hacker from hijacking a stale connection on a service that is
being proxied
• ex . HTTP page request
request packet’
request packet
User Proxy Server
response packet response packet’
Connection left open until the Connection only left open until
proxy closes it after receiving server closes the connection after
response packet and sending it sending the response packet
back to user
5. TCP Connection Termination
• Transport layer packets don’t need to be routed because the entire
request must be regenerated
• Prevents transport layer exploits
• source routing
• fragmentation
• several DoS attacks
• Since some protocols don’t have proxies available many admins will
enable routing, this alleviates any benefit gained
• Most good proxy servers will allow you to create generic proxies
using SOCKS or the redir utility
6. Performance Aspects
• Caching
• By keeping local copies of frequently accessed file the proxy can serve
those files back to a requesting browser without going to the external site
each time, this dramatically improves the performance seen by the end
user
• Only makes sense to implement this at the ISP rather than the small
business level because of the number of pages available
• Because of dynamic content many pages are invalidated in the cache right
away
• Load balancing
• A proxy can be used in a reverse direction to balance the load amongst a
set of identical servers (servers inside the firewall and users outside)
• Used especially with web dynamic content (.asp, .php,.cfm,.jsp)
7. Proxy Liabilities
• Single point of failure
• if the proxy dies , no one can get to the external network
• Client software must usually be designed to use a proxy
• Proxies must exist for each service
• Doesn’t protect the OS
• proxies run at the application level
• Usually optimized for performance rather than security
• WINGATE was installed to be easy to configure; opened a winsock proxy
to the external interface, which let hackers essentially hijack the machine
• Create a service bottleneck
• solved via parallelism (more proxies, and load balance)
8. Transparent / Opaque
• Transparent – both parties (local/remote) are unaware that the
connection is being proxied
• Zorp - application layer proxy is transparent
• Opaque – the local party must configure client software to use the
proxy
• client software must be proxy-aware software
• Netscape proxy server is opaque
• With all of the things modern firewalls can do in the area of
redirection you could configure the firewall to redirect all http requests
to a proxy
• no user configuration required (transparent)
9. Circuit Level Proxies
• Since some protocols require a real connection between the client
and server, a regular proxy can’t be used
• Windows Media Player, Internet Relay Chat (IRC), or Telnet
• Circuit-level proxy servers were devised to simplify matters.
• Instead of operating at the Application layer, they work as a "shim" between the
Application layer and the Transport layer, monitoring TCP handshaking between
packets from trusted clients or servers to untrusted hosts, and vice versa. The
proxy server is still an intermediary between the two parties, but this time it
establishes a virtual circuit between them.
• By using SOCKS (RFC 1928) this can be done
• SOCKS defines a cross-platform standard for accessing circuit-level proxies
• SOCKS Version 5 also supports both username/password (RFC 1929) and API-
based (RFC 1961) authentication. It also supports both public and private key
encryption.
• SOCKS 5 is capable of solving this problem by establishing TCP connections and
then using these to relay UDP data.
10. SOCKS based Proxying
• RFC 1928
• Not a true application layer proxy
• SOCKS protocol provides a framework for developing secure
communications by easily integrating other security technologies
• SOCKS includes two components
• SOCKS server
• implemented at the application layer
• SOCKS client
• implemented between the application and transport layers
• The basic purpose of the protocol is to enable hosts on one side of
a SOCKS server to gain access to hosts on the other side of a
SOCKS Server, without requiring direct IP-reachability .
• Copies packet payloads through the proxy
13. GNU ZORP Proxy Firewall Suite
• Protocol Analyzing Firewall
• core framework allows:
• the administrator to fine tune proxy decisions (Python based)
• fully analyze complex protocols with an application-level gateway:
• SSH with several forwarded TCP connections
• SSL with an embedded POP3 protocol).
• FTP, TTP, finger, whois, SSL .
• Usually integrated into the network topology as routers, this means that they
have an IP address in all their subnets, and hosts on different subnets use
the firewall as their gateway to the outside world.
• Proxy based but uses a packet filter to preprocess the packet stream and
provide transparency.
14. How Zorp Works
• A TCP session is established in the following way:
• client initiates a connection by sending a SYN packet destined to the server
• the firewall behaves as a router between the client and the server, receives the SYN
packet on one of its interfaces and consults the packet filter
• the packet filter rulebase is checked whether the given packet is permitted
• if the given connection is to be processed by a proxy, then the packet filter rulebase
contains a REDIRECT (ipchains) or TPROXY (iptables) target. Both REDIRECT and
TPROXY requires a port parameter which tells the local port of the firewall host
where the proxy is listening.
• Zorp accepts the connection, checks its own access control rules and starts the
appropriate proxy
• the proxy connects to the server on its own as needed (the server side connection is
not necessarily established immediately)
• the proxy mediates protocol requests and responses between the communicating hosts
while analyzing the ongoing stream
15. Best Practices
• Use a Real Firewall
• Disable Routing
• Secure the Base Operating System
• harden the OS
• Disable External Access
• Disable unneeded Services