INTERDISCIPLINARY (TECHNICAL MANAGER)

Summary

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of DoD Workforce.

About the Position: This is an interdisciplinary position and can be filled under any of the following occupational series, depending on the qualifications of the applicant and needs of the agency:

General Engineer, 0801

Architect, 0808

Civil Engineer, 0810

Mechanical Engineer, 0830

Electrical Engineer, 0850

Learn more about this agency

Help

Duties

• Plan, administer and coordinate the development of the many phases involved in the preparation of a complete set of plans, specifications, and estimates for proposed construction projects.
• Prepare government cost estimates which establish design fund requirements and serve as a basis for negotiating A-E contracts.
• Determine site adequacy and basic design requirements for the structure(s) through conferences with using agency representatives and utilization of A-E and/or District design personnel surveys.
• Evaluate merits of alternate sites and recommends the most economical and feasible location that meets non-federal sponsor and using agency requirements.
• Assure compatibility of completed designs with using agency requirements, that they conform to established criteria, and that they are in accord with acceptable engineering practices.
• Check progress and work to ensure that all necessary follow-ups, controls, transmittals of instructions, resolutions of problems, etc., are being performed
• Obtain data and information from outside sources, advises on solutions to technical problems and, as required, interpolates from inconclusive and variable data requisite design criteria.
  
  

Help

Requirements

Conditions of Employment

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• This position requires travel away from the worksite (TDY) to other duty locations approximately 20% of the time to visit project sites to attend progress meetings, project briefing on site, and to attend training and meetings.
• Position requires a valid, state-issued motor vehicle driver's license since project sites may be located in remote areas that are not accessible by public transportation.
• This position is subject to a one year probationary period unless the appointee has previously met the requirements as described in 5 CFR Part 315. While probationary the incumbent can be terminated with limited appeal rights.
• This position requires pre-employment Financial disclosure statement (OGE 450) and annually thereafter in accordance with DoD Directive 5500-7-R.
  
  

Qualifications

Who May Apply: US Citizens

In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

Basic Requirement For Engineer:

• Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must:(1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET);
  
  

OR

• include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
  
  

OR

• Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.
  
  

The adequacy of such background must be demonstrated by one of the following:

• Professional registration or licensure- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
• Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
• Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
• Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
  
  

Basic Requirement For Architect:

• Degree: Bachelor's degree (or higher degree) in architecture or in a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems.
  
  

OR

• Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings.
  
  

The adequacy of such background must be demonstrated by at least one of the following:(1) Related Curriculum - Degree in architectural engineering provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in statement A above,

OR

• Experience: 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of any college courses, 5 years of such experience is required. This experience must have demonstrated that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture.
  
  

In Addition To Meeting The Basic Requirement Above, To Qualify For This Position You Must Also Meet The Qualification Requirements Listed Below:

Specialized Experience GS-09: One year of specialized experience which includes 1) Assisting in the design management of projects as they relate to buildings and building systems, structural, utility systems, site design, or infrastructure; AND 2) Preparation of engineering reports, assessments, and plans and specifications as it relates to construction projects. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-07).

OR

Education: Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: [insert applicable field(s) of study].

OR

Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages.

Education

Specialized Experience GS-11: One year of specialized experience which includes 1) Performing design management process of projects of buildings and building systems, structural, utility systems, site design, or infrastructure; 2) Reviewing technical adequacy of engineering documents for compliance with specifications and requirements; AND 3) Preparation of engineering reports, assessments, and plans and specifications as it relates to construction projects. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09).

OR

Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Engineering or Architecture.

OR

Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.

Specialized Experience GS-12: One year of specialized experience which includes 1) performing

design management process of projects of buildings and building systems, structural, utility systems,

site design, or infrastructure; AND 2) preparing engineering documents such as assessments,

reports, plans and specifications for complex construction projects; AND 3) reviewing technical

adequacy of engineering documents for compliance with specifications and requirements. This

definition of specialized experience is typical of work performed at the next lower grade/level

position in the federal service (GS-11).

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/

Additional information

• Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
• You will be required to provide proof of U.S. Citizenship.
• One year trial/probationary period may be required.
• Direct Deposit of Pay is required.
• This position requires you to submit a Public Financial Disclosure Report (OGE 278) or a Confidential Financial Disclosure Report (OGE450) upon entry, and annually thereafter.
• Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
• If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
• This is a Career Program (CP) 18 - Engineers and Scientists position.
• Salary includes applicable locality pay or Local Market Supplement.
• When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.dfas.mil/civilianemployees/civrelo/Civilian-Moving-Expenses-Tax-Deduction.htm for more information.
• Permanent Change of Station (PCS) allowances may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest.
• Recruitment and Relocation incentive may be authorized.
• Student Loan Repayment may be authorized
  
  

Read more

• Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
  
  

Review our benefits

Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

RD-W2SF02 US ARMY ENGINEER DISTRICT-NEW YORK

DO NOT MAIL

New York, NY 10278

US