What to Know
- To soft reset your soundbar, shut it down, unplug it, and wait 30 seconds before powering it back on.
- For a hard reset, hold down the power button for about 10 seconds.
- A reset can address many problems, like if the soundbar won't connect to the TV or a Bluetooth device.
In this article, we'll explain how to reset a Samsung soundbar. There's only one button involved, and you won't need any tools or technical know-how. These troubleshooting tips apply to most Samsung soundbars, though your particular device may work differently. Consult your manual or search for it online if necessary.
How to Soft Reset a Samsung Soundbar
To perform a soft reset on your soundbar means to reboot it. It may not seem like this can make any difference, but power cycling a soundbar in this way can resolve odd behavior or unexpected issues. Here's what to do:
-
Turn off your soundbar and disconnect it from power. Make sure the device is fully powered down.
-
Wait at least thirty seconds.
-
Plug the soundbar back in and turn it back on. Once it's powered back up, test it out and see if it's working.
How to Hard Reset a Samsung Soundbar
Hard resetting your soundbar involves completely resetting the device back to factory defaults. Although it sounds complicated, it really just involves a single button press.
A hard reset will restore the software back to factory defaults. This means the soundbar will forget all its data, which includes paired devices. You'll need to re-add Bluetooth devices after the reset is finished.
-
Turn off the soundbar using its power button or the remote.
-
Hold down the power button on your soundbar for about 10 seconds.
-
Release the button when you see the message INT on the soundbar. If there's not a message, you might instead see a blinking red light.
-
Wait while the soundbar finishes up and prepares for first use.
Other Reset Methods
Here are a couple of other hard reset methods you can try if the above directions were unhelpful:
- Repeat the hard reset steps, but this time hold down the Play/Pause button on the remote in place of the power button for step 2. After about 10 seconds, turn the soundbar back on and try using it again.
- Turn the soundbar on, press-and-hold the volume up and volume down buttons simultaneously for about 10 seconds. Wait for the soundbar to restart.