59
$\begingroup$

Set in the distant future, space travel becomes prominent and cheap. I can imagine each spaceship would have a multitude array of sensors to track distance and relative position in space. Is there a good way to determine another spaceship's mass beside hailing them for specifications?

I know we can accurately know the mass of an asteroid using Newton's law of universal gravitation and probably Kepler's law too, I guess, but that's only for an orbiting object in space unlike a spaceship which usually accelerates using its own propulsion drive.

Please state the principle of measurement and I would prefer an economical solution.

$\endgroup$
13
  • 21
    $\begingroup$ Do you mind me asking . . . why would you need to know? $\endgroup$ Commented Mar 7, 2019 at 11:31
  • 7
    $\begingroup$ @BinaryWorrier: why not? I cannot imagine the display screen shows the mass of every astronomical objects except other spaceship... $\endgroup$
    – user6760
    Commented Mar 7, 2019 at 11:38
  • 50
    $\begingroup$ @BinaryWorrier If you are an explorer encountering an alien ship you have never seen before, then you would want to know as much about it as you can. If you are a space pirate looking for booty, you don't want to waste your time with capturing an empty freighter. If you are law enforcement, you might have to enforce some spaceflight regulations where vessel mass is relevant ("If you want to enter geostationary orbit around this planet with a vessel mass over 10000 tons you need permit 87A/65 in triplicate"). $\endgroup$
    – Philipp
    Commented Mar 7, 2019 at 11:48
  • 7
    $\begingroup$ You specifically exclude asking them, so I won't write this as an answer, but have you considered an automatic identification system? Currently, all aircraft and watercraft above a certain size are required to broadcast their identity and location (and probably more). A similar system for your spacecraft could also include current or nominal mass of the ship. This wouldn't work for alien or unauthorized craft, or for asteroids, but it would certainly help you identify all law-abiding vehicles. $\endgroup$
    – David K
    Commented Mar 7, 2019 at 14:17
  • 10
    $\begingroup$ "we can accurately know the mass of an asteroid using Newton's law of universal gravitation": this is true only if the asteroid has a satellite orbiting about it. What can be used is the Yarkovsky effect, but with current technology that requires a long period of observation. $\endgroup$ Commented Mar 7, 2019 at 14:19

19 Answers 19

76
$\begingroup$

A few options ordered from "difficult but can be done at any time" to "easy, but requires an opportunity".

Measure the gravitational lensing effect of the ship

Every mass in the universe bends the space around it. This can be observed because stars behind the object appear displaced. This is how current day astronomers estimate the masses of astronomic objects (planets, stars, galaxies...). With access to much more precise instruments it might be possible to use the same principle for much smaller masses.

If you are able to measure gravitational lensing around a regular sized space ship with current day technology, you know you are dealing with something with a really, really extreme density (neutron-star level)... or with something which uses artificial gravity technology. Anyway, it's definitely something based on technology far beyond anything you could comprehend. Proceed with caution!

Measure the effect of its gravity on nearby objects

If your instruments are not precise enough to measure its effect on light, you might still be able to measure its effect on dust clouds, micro-asteroids, space junk and other small objects when they get very close to the ship.

But again, if they use artificial gravity technology, then that might screw up your measurement. Also check if the objects you measure contain any magnetic materials. If the ship generates a magnetic field for some reason (which can be an unintentional by-product of all kinds of devices), then that might also affect nearby objects.

Measure its exhaust and the corresponding acceleration

I would like to expand on point 3 of the answer by Darth Donut. If the engines of the ship work according to Newtons 3rd law of motion (which is the only way space propulsion can work according to our current understanding of physics), the kinetic force of the exhaust is exactly the same as the kinetic force applied to the ship. So when you observe the ship while it performs an acceleration burn, you can observe how much exhaust mass it expels per second and with what velocity. Multiply the two and you have its engine thrust. Divide the thrust by the acceleration of the ship you observe, and you have the mass of the ship.

Measure how it behaves when hit by another object

The ship is too light to cause any observable gravity effects and doesn't feel like performing any maneuvers right now? There is another way to apply Newton's laws to examine its mass. Wait until it gets hit by a micrometeroid. Measure the mass and acceleration of the meteroid and see how much the ship's velocity changes when it gets hit. When no meteroids are around, you could of course launch a known mass with a known acceleration at the ship yourself. But that might be perceived as impolite.

$\endgroup$
15
  • 61
    $\begingroup$ "But that might be perceived as impolite." - Might? I can only imagine: "Sir, Contact 47855-b has shot a small metal pellet at us! Reporting minor hull damages!" "Buggers, RETURN FIRE!" :) $\endgroup$
    – DarthDonut
    Commented Mar 7, 2019 at 10:30
  • 40
    $\begingroup$ "well, i guess they also want to know our ship mass by sending an object, but why they did this with several missiles?" $\endgroup$
    – Kepotx
    Commented Mar 7, 2019 at 10:44
  • 13
    $\begingroup$ How do you measure the mass of the exhaust? I'd imagine that if you can do that by simple observation, you'd be able to just measure the mass of the ship itself. $\endgroup$ Commented Mar 7, 2019 at 13:54
  • 11
    $\begingroup$ @NuclearWang The exhaust should be pretty easy to observe visually. With the ship you won't know what it hides beneath the hull. $\endgroup$
    – Philipp
    Commented Mar 7, 2019 at 13:55
  • 6
    $\begingroup$ If the ship is very small, you could shoot it with a laser and measure the response. $\endgroup$
    – p.s.w.g
    Commented Mar 7, 2019 at 18:18
42
$\begingroup$

Here are a few ideas I got:

1. Look up the ship type:
As long as this ship you are seeing is not made by a to date unknown civilication, your databases should be able to identify the ship type, and show you some basic information for that.

2. Estimate by size:
As long as you can measure the distance, you can measure the size of such a ship. Now, your engineers will have an estimate for how much space is taken up by machinery, how much mass is used for the hull, how much space is needed for crew and so on. They know what materials are used commonly, and by multiplying the estimated volume with an average density you can estimate the mass of the ship. It is not a precise estimate, but your engineers should be pretty near to the exact value.

3. Measure the acceleration and energy output of the engines:
Every engine known to us emits radiation in some form due to conversion losses. As long as you can measure the acceleration of such a ship, the radiation of the engines and can identify the type of engine, you should be able to get a good estimate how much energy is used to power the engine, how much force the engines generate and in turn how much mass the ship has.

Everything you need for the above methods are good optical sensors and radiation sensors.

$\endgroup$
16
  • 4
    $\begingroup$ good answer, but point 2 may be hard to apply for cargo ship, as their mass also depend on how full they are and what goods they have on board. $\endgroup$
    – Kepotx
    Commented Mar 7, 2019 at 10:22
  • 1
    $\begingroup$ wouldn't point 3 work only on areas impacted by gravity, as once you are on space, you don't need to accelerate anymore (at least if you already are on full speed) $\endgroup$
    – Kepotx
    Commented Mar 7, 2019 at 10:26
  • 6
    $\begingroup$ @Kepotx I fear there is no such thing as "full speed" in space other than light speed. Sure, if you are on a set course without the need to maneuver, point 3 does not work. And for a cargo ship, you could still get lower and upper bounds of possible masses. $\endgroup$
    – DarthDonut
    Commented Mar 7, 2019 at 10:31
  • 4
    $\begingroup$ By full speed, I didn't mean max speed allowed by laws of physics, but optimal speed, as the faster you go, the more you have to break. Also, making maneuver consume energy, so you want to avoid it if possible. $\endgroup$
    – Kepotx
    Commented Mar 7, 2019 at 10:37
  • 2
    $\begingroup$ Adding to the troubles with point 2, if you look at the vibrations of the overall vessel you may be able to estimate how full it is and the mass of the cargo. A laser microphone should be able to do this if their engines are running. $\endgroup$
    – Separatrix
    Commented Mar 7, 2019 at 11:57
19
$\begingroup$

The vacuum of space act as a dielectric.

If you are close enough, provide a net electric charge to your own ship. This will induce a charge also on the probed ship, and will trigger an electrostatic attraction between the two.

Measure your velocity with respect to background and your velocity with respect to the probed ship.

Since you know the charge involved and you can determine the resulting force exerted on the probed ship. The resulting force will change your velocity and the one of the probed ship. You know your mass and your velocity both with respect to background and to probed ship, the only unknown parameter is the probed ship mass.

$\endgroup$
5
  • 3
    $\begingroup$ What If the're also doing the same thing? It could affect the measurement... $\endgroup$
    – user000001
    Commented Mar 7, 2019 at 18:21
  • 6
    $\begingroup$ How are you going to charge your ship? Spew a kilocoulomb of electrons into space? How often can you do that before people& things not “earthed” to the ship get electrostatic damage? $\endgroup$
    – WGroleau
    Commented Mar 7, 2019 at 21:14
  • $\begingroup$ @WGroleau You could move the electrons into a separate section of the ship, “storing” them, then release them back into the rest of the ship when done with your measurements. Remember to take the field from the storage section into account during calculations. $\endgroup$
    – Paralyzoid
    Commented Mar 8, 2019 at 17:14
  • $\begingroup$ @Paralyzoid in other words, don't use a net charge, but an electric dipole. $\endgroup$ Commented Mar 9, 2019 at 18:35
  • 2
    $\begingroup$ This is a nice idea but somehow I get the distinct feeling that when you do this measurement I want to be in the other ship. No idea why. $\endgroup$ Commented Mar 11, 2019 at 2:25
17
$\begingroup$

In Civilized Areas, They will Tell You Automatically

Today, ships and aircraft have systems that self report their name, size, exact location, velocity, destination etc. For ships, this is AIS, and for aircraft it is ADS-B. The systems automatically squawk their info at regular intervals, so as soon as you are in receiving range you know what the contact picture is.

It is often required by the relevant authorities, as it significantly improves safety when everyone knows where everyone else is.

Otherwise, IR will give a Good Guess

All vessels will have a power source. This power source is going to have waste heat, which will radiate from the vessel evenly. (Unless the owner pumps air/fluids around to deliberately alter the heat transfer.) This waste heat will be subject to one over r squared losses. If you can determine a range, you can determine how much this blackbody radiation will have dropped off, and you can get an estimate of the size of the power source.

Power is going to be strongly related to vessel size and acceleration. The exact equation is probably going to be complex, but luckily the universe is full of vessels providing you with empirical data!

$\endgroup$
4
  • $\begingroup$ IR won't work without additional info about vessel class and function. A small freighter and a courier ship can be the same size, but unlike the freighter the courier ship will have a bigger power plant and engines for better acceleration. $\endgroup$
    – DarthDonut
    Commented Mar 8, 2019 at 7:44
  • 2
    $\begingroup$ @DarthDonut - but we are observing the target's current acceleration. Plant capacity doesn't matter - only current output compared to current acceleration. "Class" info is useful for understanding plant efficiency to refine our estimate, but it's hardly required. $\endgroup$
    – codeMonkey
    Commented Mar 8, 2019 at 9:31
  • $\begingroup$ "Unless the owner pumps air/fluids around to deliberately alter the heat transfer." -- Manned spacecraft larger than just a capsule have active radiators, from Skylab/Mir days, through the shuttle era (the shuttle's cargo bay doors were also its radiators) through the ISS and Chinese stations, and even the latest manned capsule, the Crew Dragon, has radiators. Interplanetary craft will definitely pump fluids around to alter heat transfer, whether they're doing it to intentionally mask their thermal signature or not. $\endgroup$
    – Ghedipunk
    Commented Mar 8, 2019 at 22:18
  • $\begingroup$ @Ghedipunk This actually makes things easier, not harder. It will also separate the heat from the power plant and engines from all the other waste heat (you don't want to mix life support heat with engine heat). Even if the ship is idling, the size of the radiators is going to give you a good idea about the kind of heat the ship is designed to release under load, which will correlate with ship profile quite well to give you a decent idea about the mass unless someone deliberately designs the ship to be awkward (e.g. space pirates, Q-boats, spy ships...). $\endgroup$
    – Luaan
    Commented Mar 11, 2019 at 14:31
16
$\begingroup$

Muography.

https://en.wikipedia.org/wiki/Muography

Muography is an imaging technique that produces a projectional image of a target volume by recording elementary particles, called muons, either electronically or chemically with materials that are sensitive to charged particles such as nuclear emulsions. Cosmic rays from outer space generate muons in the Earth’s atmosphere as a result of nuclear reactions between primary cosmic rays and atmospheric nuclei. They are highly penetrative and millions of muons pass through our bodies every day.

Muons traverse a solid object according the the mass of the object, more dense objects stopping muons more than less dense objects. One can use ambient muons to produce images. This is how the interior of a volcano was imaged. NASA has a proposal to use ambient muons to image the interior of asteroids in space. asteroid https://www.nasa.gov/content/deep-mapping-of-small-solar-system-bodies-with-galactic-cosmic-ray-secondary-particle-1

Muography has been used to characterize very dense objects. If you are digging it, read this whole paper where they characterized old objects from nuclear waste sites. https://royalsocietypublishing.org/doi/pdf/10.1098/rsta.2018.0048. Lots of images of stuff with stuff inside! Here is an image of a contaminated crucible encased in glass, minus the glass and then minus the crucible, with only the radioactive contaminants.

muography images of radioactive waste item

Muography can let you image a ship passively, without it knowing it is being imaged. That might have its uses.

Backscatter muography is near future scifi - the idea would be to have your own muon source, like your own light source and actively image something by shooting muons at it and then capturing those which are reflected. Just as light things reflect visible light more, dense materials will reflect muons more, and just as one characterizes density passively by capturing wild muons which traverse from the far side of the object heading towards you, you could actively image by spraying your artificial muons at the object and characterizing scatter back towards you.

$\endgroup$
5
  • $\begingroup$ A very interesting concept. Except my understanding of muons is that they need an atmosphere in order to be created. They are not present in deep space in large quantities. I suspect this method would work close to a solar system with a good supply of muons. $\endgroup$ Commented Mar 9, 2019 at 14:59
  • $\begingroup$ Using cosmic rays themselves, however, might be useful. $\endgroup$ Commented Mar 9, 2019 at 15:02
  • $\begingroup$ @JustinThyme - actually in a solar system there would be a lot of energetic hard radiation. In addition to particles like muons or cosmic rays, you could also use the absorption of short wavelength EMR like gamma rays and X-rays to measure the density of an object. $\endgroup$
    – Willk
    Commented Mar 10, 2019 at 0:19
  • $\begingroup$ @ Willk All distinct possibilities, and since the assumption would be that about the only time you would come into contact with another spaceship would be within a system, these options are credible. $\endgroup$ Commented Mar 10, 2019 at 0:44
  • 1
    $\begingroup$ Cool idea, hadn't heard of this but I figured we were already doing something similar. I like the idea that the background radiation could be an almost grey static surrounding your ship and the other ship would be a darker grey smudge. The darker the smudge, the heavier the ship. $\endgroup$
    – JDrumm
    Commented Mar 12, 2019 at 15:48
15
$\begingroup$

Probe indirectly

Launch a small probe of precisely known mass so that it passes at a known distance from the ship. The probe might be as opaque and undetectable as could be. At a predetermined moment the probe shoots a low-power laser signal to the mothership, allowing its position to be precisely determined. From there, you can work back the deflection on the trajectory caused by the gravitational mass of the unknown ship.

Probe (almost) directly

Send two probes at different distances from the unknown ship, depending on how sensitive their gravitational sensors are. Measure acceleration on both probes. These will be caused by all nearby masses (the mothership included), but using two probes, the residual that has quadratic dependency on the unknown ship's distance once the other masses are ruled out will give the unknown ship's mass.

For example if all other masses are sufficiently far away, the distance between them and probes P and Q may be taken as constant, so the differential will be zero. The acceleration on probe P will then be given by G(M/a^2 - X/(b+d)^2) while that on probe Q by G(M/(a+d)^2 - X/b^2), with M and X the masses of the mothership and the unknown's, a and b the distances of the first probe from the mothership M and the unknown, and d the distance between the probes:

     M            P         Q                                        X
     |--- a ------|--- d ---|--------------------- b ----------------|

Assuming b, especially, is known with sufficient accuracy (phased laser ranging, maybe?) and gravimeters (not accelerometers, thanks @wizzwizz) of sufficient precision are available, the two probes could even be mounted on a fixed "antenna" (it is not necessary for M, P, Q and X to be aligned on a line, but this simplifies things).

$\endgroup$
2
  • 1
    $\begingroup$ The accelerometers would feel no gravitational acceleration, because all of them is being accelerated at once. $\endgroup$
    – wizzwizz4
    Commented Mar 9, 2019 at 11:22
  • $\begingroup$ @wizzwizz4 you're right, of course. Fixed answer $\endgroup$
    – LSerni
    Commented Mar 9, 2019 at 15:43
11
$\begingroup$

Shine a laser at it, and measure the (exceedingly slight) change in momentum.

Several years later, in 1922, physicist Arthur Compton performed an experiment which led to the discovery of the Compton Effect. Proving Einstein correct, Compton showed that photons indeed have momentum which is transferrable to materials that have a mass. Compton was awarded the 1927 Noble Prize in Physics for demonstrating that photons can transfer their momentum to the electrons with which they collide inside an atom.

I am, of course, assuming that by the time there are enough spaceships out there that one needs to worry about determining their mass, we will have the technology to be able to detect very minute changes in momentum that a laser beam would impart on a ship. Yes, I am aware that it would be easier to detect the change in momentum caused by a flea smacking into a super jumbo jet, but hey, we are talking about the future here.

$\endgroup$
3
  • 9
    $\begingroup$ It seems that people moving around inside the spaceship might have a bigger effect than the laser, making it hard to extract signal from noise. $\endgroup$
    – prl
    Commented Mar 7, 2019 at 18:47
  • $\begingroup$ @prl It would for sure require a lot of iterations to sort out noise from signal.. But apparently intelligence services were able to detect what was on the old CRT monitors by detecting the varying light levels in a room,ans the beam moved across the screen and satellite phones can filter out every signal BUT the one signal from the one phone across a huge section of the globe, through all of the electromagnetic noise. Fourier transforms, maybe? $\endgroup$ Commented Mar 8, 2019 at 0:35
  • $\begingroup$ Perhaps the laser could simultaneously be used to measure distance using interferometry. And if you aim carefully and defocus the beam to hit a large enough metal area, it could be a quite strong laser to make the effect more pronounced. $\endgroup$
    – jpa
    Commented Mar 9, 2019 at 21:10
10
$\begingroup$

earth gravmap

Equipment that can survey the gravitational potential on the order of microgals is quite common today in geological industry and academia, known as gravimetry.

The machines used as instrumentation, gravimeters, are quite interesting, but ultimately they are able to derive densities by way of directly measuring differing gravitational acceleration at many points. These have even been used to probe non-geological manmade-scale objects e.g. when French scientists surveyed the Cheops pyramid for unknown chambers.

A tech advanced gravimeter (perhaps using an array of atom chip nano gravimeters) paired with a good gravimetric map of the navigation area should allow measurement of the mass of an anomalous body. With enough resolution you could even possibly map the density distribution of the vessel and track masses moving on the interior.

$\endgroup$
7
$\begingroup$

Scan them. Fire a very large burst of neutrinos at them and measure how much gets reflected back. In general the more massive an object is the more return signal you will get. It works okay for an estimated order of magnitude.

Unlike other answers this probably won't be recognized as an act of violence, doesn't disturb their trajectory and gives you an answer near to light speeds.

Edit: Actually, I'm no physicist but I think you won't get neutrinos back, you might get electrons, but I'm just not knowledgeable enough to say for sure.

$\endgroup$
4
  • 1
    $\begingroup$ Where are you going to get the very large burst of neutrinos? Ordinary nuclear reactors and particle accelerators don't generate enough to be usable, and lighting someone up with a nuclear flashbulb might be mistaken for a hostile act. $\endgroup$
    – Mark
    Commented Mar 7, 2019 at 20:59
  • 4
    $\begingroup$ @Mark - fine, fine. JDrumm can use muons. Muon scanning is currently used to measure the mass of large objects like pyramids and mountains. Pinging a ship with incompletely absorbed particles is a fine way to estimate mass. $\endgroup$
    – Willk
    Commented Mar 8, 2019 at 14:12
  • $\begingroup$ @Willk I never heard of that before. It seems to be interesting. Maybe you would like to post an answer of your own? $\endgroup$
    – Philipp
    Commented Mar 8, 2019 at 15:43
  • 3
    $\begingroup$ @Mark "Hey, we're the Starship Enterprise. Don't shoot; we're just going to detonate a supernova near you in order to measure your mass" $\endgroup$
    – user45266
    Commented Mar 11, 2019 at 3:18
7
$\begingroup$

A patient passive approach could work. Observe ship apparent size and structure (visual angle) relative to your ship. Use an optical distance range finder. Integrate the number of naturally present cosmic rays passing through the other ship into your ship in order to passively estimate density - The ice cube observatory uses similar methods and works for space ships up to almost the thickness of Earth. Get an estimate of the other ships surface area & unseen sides by capacitance (just measure your own ships capacitance, deviation from typical solo deep space value indicates parallel capacitance of the nearby ship). Calculate surface to volume ratio and add density estimate from cosmic ray result for an estimate of mass that improves with more cosmic ray integrations.

$\endgroup$
6
$\begingroup$

Shoot them with a powerful laser and see how much the momentum of their ship changes.

You didn't mention anything about leaving the ship intact.

$\endgroup$
3
  • 10
    $\begingroup$ Sounds good until you find out they have a more powerful laser. $\endgroup$
    – prl
    Commented Mar 7, 2019 at 18:54
  • 4
    $\begingroup$ @prl "If you must swing first, swing hard.. and connect." $\endgroup$
    – Cort Ammon
    Commented Mar 8, 2019 at 5:13
  • 1
    $\begingroup$ You mean "... and see how much the momentum of the gas cloud formerly known as their ship changes" ;-). "Sir, it was a very interesting ship! Its mass was extraordinary! Maybe we should have..." "There is no use crying over spilled milk, Lieutenant." $\endgroup$ Commented Mar 11, 2019 at 13:14
4
$\begingroup$

You didn't say how long you want to take to figure out the other ship's mass. If you aren't in a hurry and it's just you and the other ship with no other ships or masses nearby, and (ideally) neither of you is accelerating, then you can simple take periodic measurements of the distance between your ship and theirs. Two distance measurements taken close together can tell you your current speed. Then at longer intervals take more measurements and determine how much your distance differs from expectations. The difference should be mainly due to gravitational attraction between ships.

Note that this method works best if the other ship is stationary relative to you, isn't terribly far away, and remains this way for a few weeks, maybe less depending on how accurately you can measure the distance between your ship and theirs using radar or some other mechanism. This situation happened in "2001: A Space Odyssey" where during the trip to Jupiter there were two ships near each other and they had to make minor course corrections during the trip due to their mutual gravitational attraction.

$\endgroup$
3
$\begingroup$

Gravitational Field, nearly exactly how we are measuring EM field currently. LIGO proved it can be done for large object in 2017 when 2 black holes collided and generated gravitational waves.

Starship in the future should be in the scale of million - trillion tonnes and moving at at least 10-20% speed of light, this would make considerable 'huge' amount of gravitational waves if moving 'close' together (by close I mean a few thousands kilometers). Heck we can measure gravitational waves emitted by black holes light years away now, absolutely we can do that for smaller objects within a few thousands kilometers in 200-300 years, especially if that object moves close to speed of light since it generates more identifiable ripples.

I'm pretty sure we can work the math out to the exact dimensions of LIGO-like version needed to do this, but it would be terrifyingly difficult for people like us. I have strong background in electric engineering and still cannot grasp most part of it.

$\endgroup$
1
  • $\begingroup$ I don't think you'd get much in the way of waves. LIGO detected the perturbations caused by co-rotating singularities, which would produce waves. A nearby starship would have a stable gravitational well, not gravitational waves. $\endgroup$
    – Corey
    Commented Mar 10, 2019 at 23:26
3
$\begingroup$

Assuming no magic technology to provide the answer, and that I was writing a hard scifi story where this knowledge was important, then ... as has been said above 'Newton is your Daddy!'

The same method used to measure masses of all the planets in our solar system would work in this case. To summarize my interpretation of the original technique is by iterating through assumed mass values and computing the paths followed by the planets in their orbits to predict where the planet will be in the future. By comparing the actual paths to the predicted paths, the error in the guesstimate for the planetary masses can be improved.

It's my understanding that this is how early astronomers came up with the values for planetary masses, and I also believe that there are slight wobbles in planetary orbits that our guessimates can't model; suggesting that there are more masses to be accounted for in our equations. But, our models are good enough to launch space probes past Pluto, so they are good enough for now.

For spaceships, the idea would be similar. Spaceship A wants to travel along a specific path in 4D (x,y,z,t). It knows its own mass very accurately. And can measure the distance to any object it can see via lidar, radar, optical means, etc. The spaceship computes the thrust vector to move it along the path, any errors in the actual path represent either unidentified masses or inaccuracies in mass guesstimates. Iterating over the computations until the errors in navigating go to zero, or near zero, then you know the mass of everything around you.

Similarly, if the vector required to keep a ship moving along a specific path suddenly changed or slowly changed, then that would indicate something moving near or away from your ship. This would provide a means for detecting hidden ships.

The math for this kind of stuff is very common in scientific applications, radar systems, sonar systems, and cell phone technology -- albeit not computing errors in mass, but for figuring out parameters that affect the transmission, reception, or interpretation of data.

And since gravitatal forces are limited by relativistic limits there is a practical limit to the range that objects could be detected and 'measured.'

$\endgroup$
2
$\begingroup$

Grab them with a tractor beam (or cable with a magnet at its end if you're inclined to be low tech and their hull is magnetic) and try to tug it.

Provided you have some way of precise spatial reference (launching several small drones in at least 3 directions should suffice as low tech solution), and you knowing your own mass and power of your engines, you should be able to calculate inertia of additional mass you're trying to move.

$\endgroup$
2
$\begingroup$

You can't measure it directly at a distance with current technology.

Tech however at a given time is fairly well constrained. E.g. If you are building battleships, then knowing the dimensions of the battleship give you a pretty good idea of the mass. Space allows extreme magnification of images, so getting an approximate mass at a distance of several AU's is reasonable.

Another factor is the power/mass ratio. This will affect acceleration, and possibly also weaponry. A destroyer has a much higher power/weight ratio than a battleship. Thinner armour, smaller guns. Destroyers run rings around fleets and convoys to intercept subs.

In space you also look at the waste heat. The volume of a ship goes up with the cube of linear dimensions, while the surface area goes up only as the square. A big ship has a bigger problem getting rid of waste heat. It's radiators will run at higher temps.

You would also monitor communications. Difficult. Comm channels are likely to be tightly beamed.

All of these are subject to a certain amount of spoofing:

  • A small ship can inflate a large metallic balloon and appear to be much larger.
  • A small ship, by manouvering at well below max acceleration may be thought to be larger.
  • A small ship, by directing it's cooling heat at you can appear to be disposing of more heat -- signature of a larger ship.
  • A large ship, by directing waste heat away from you appears smaller
  • A large ship, if shaped like a disk or a brick can maintain an orientation edge on or end on and appear smaller.
  • A large ship, with the outline of a small ship in white and the rest of the ship black, may be classed as a small ship at long range. Of course black doesn't help the heat disposal problem.

Detectors: Visual gives you the most information about the detail. Far infrared gives you more information about the skin temperature, and hence the power use. The outline technique above wouldn't fool an IR scan.

Having scouts spread throughout the space of interest makes deception harder. A small detector, disguised or part of an asteroid would be nearly impossible to spot. If space also had several radar illuminator ships, the passive scouts would get radar distances -- You get both the reflection of the radar off the enemy, as well as the time signal from the radar ship. That and geometry give you a solution of the distance.

Note that as soon as you change technology, all this goes out the window. E.g. at present one of the ways we would measure is the amount of rocket exhaust and the resulting acceleration. Replace that with ion drives, and we may not even see the exhaust.

Analogues:

Submarines are identified by their sound signatures. And some of the same forms of deception are used, pretending to be something they are not. (Usually however a sub's goal is to be undetected.

Radar can determine the difference between a Cessna and a Boeing by strength of reflection, as well as the way it manoevers. Adding a corner reflector increases the radar return substantially making the Cessna look bigger. Stealth coatings on fighters make the radar return vanishingly small.

In the days of sail, a ship of the line could be spotted further away -- taller masts. At closer range, you could look at the rigging and get a good idea of the size of the ship. Counting gun decks was another way.


The uncertainties add to the fun in your universe. Allows for possible ruses des guerre

$\endgroup$
1
$\begingroup$

Less than a hundreds years ago, we didn't have any application for electromagnetic waves, nor didn't know how to sense it. Now we can detect gravitational waves (well, only the strong). In future, we may have miniaturized sensitive technology to measure the disturbance in space-time. Who knows, may be we can sense the mass of the ship by measuring the turbulence it causes in the space-time.

$\endgroup$
3
  • $\begingroup$ who knows maybe someone somewhere somehow invents twin blackhole drives... we'll need your help then. $\endgroup$
    – user6760
    Commented Mar 7, 2019 at 15:53
  • 1
    $\begingroup$ Actually we started using electromagnetic waves from the very moment we learned how to make fire, which is an electromagnetic wave emitter. $\endgroup$
    – L.Dutch
    Commented Mar 7, 2019 at 16:05
  • $\begingroup$ This (handwavium waves) is the One True Answer. $\endgroup$
    – RonJohn
    Commented Mar 7, 2019 at 17:30
1
$\begingroup$

Late to the party, but...

Measure the tidal effect of their gravitational well.

Using a network of extremely accurate force measurement devices (direction and magnitude) you could get a map of the local gravitational topography. Subtract your ship's baseline to remove its own gravitational field from the data and you'll get a very small tidal effect on a line that points to the target ship. Detectors on the side closest to the target will be trying to accelerate towards it faster than detectors on the other side of your ship by a tiny amount that is can be used to calculate the mass of the target.

Of course we're talking about measuring exceptionally small values - on the order of 67 nano Newtons of tidal force over 500m with a target mass of 1 gigaton. You'd best keep your crew from breathing too hard while all this is being measured.

$\endgroup$
1
$\begingroup$

The Newton method

Have a large array of highly sensitive movable ball-bearings (similar types of lumps of matter), perhaps mounted on precisely calibrated springs or something, suspended in a vacuum.

The ball-bearings will be pulled towards the target object with a force proportional to its mass, which can be calculated by how much the ball-bearings move.

Of course, you'll have to take into account all the objects in the area, including your own ship and the people and objects therein (including the other ball-bearings and springs) which is why you need such a large array of sensors - each will be moved by a different amount depending on its distance from each object, allowing an AI to use the movement of each ball-bearing to isolate object.

The algorithm to do that is left as an exercise to the reader :-p

$\endgroup$
1
  • $\begingroup$ Computing the current effect of your own ship compared to that of a distant ship isn't practical. Present tech doesn't allow us to do this with a planet, let alone something as small as a ship. $\endgroup$ Commented Mar 22, 2019 at 20:14

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .