I am having a problem with zsh and zprezto where on error my cursor will shift to the left by two chars, overwriting part of the prompt. I have reverted my prompt file back to the original version, and have determined that it is not anything related to zprezto that is causing the problem.
A few days ago I had to manually run fsck, and some configuration files were corrupted. Because this problem is apparent on this computer only and on multiple terminal emulators, I have come to believe that one of the files necessary for the terminal was corrupted.
It is not Termite, because xterm had the same problem. I have tried reinstalling zsh, zprezto, and termite, and none of these has had any effect. I have run out of ideas for places to check.
My zshrc:
#
# Executes commands at the start of an interactive session.
#
# Authors:
# Sorin Ionescu <[email protected]>
#
# Source Prezto.
if [[ -s "${ZDOTDIR:-$HOME}/.zprezto/init.zsh" ]]; then
source "${ZDOTDIR:-$HOME}/.zprezto/init.zsh"
fi
bindkey -e
# Customize to your needs...
alias hibernate='sudo pm-hibernate'
alias suspend='systemctl suspend'
alias clean_log='sudo journalctl --vacuum-size=20M'
alias rust_book="lynx $(rustc --print=sysroot)/share/doc/rust/html/book/index.html"
alias rust_docs="lynx $(rustc --print=sysroot)/share/doc/rust/html/index.html"
alias htop="sudo htop"
alias brightness="brightnessctl"
alias backlight="brightnessctl"
eval $(thefuck --alias)
My prompt file:
#
# A simple theme that displays relevant, contextual information.
#
# Authors:
# Sorin Ionescu <[email protected]>
#
# Screenshots:
# http://i.imgur.com/nrGV6pg.png
#
#
# 16 Terminal Colors
# -- ---------------
# 0 black
# 1 red
# 2 green
# 3 yellow
# 4 blue
# 5 magenta
# 6 cyan
# 7 white
# 8 bright black
# 9 bright red
# 10 bright green
# 11 bright yellow
# 12 bright blue
# 13 bright magenta
# 14 bright cyan
# 15 bright white
#
# Load dependencies.
pmodload 'helper'
function prompt_sorin_async_callback {
case $1 in
prompt_sorin_async_git)
# We can safely split on ':' because it isn't allowed in ref names.
IFS=':' read _git_target _git_post_target <<<"$3"
# The target actually contains 3 space separated possibilities, so we need to
# make sure we grab the first one.
_git_target=$(coalesce ${(@)${(z)_git_target}})
if [[ -z "$_git_target" ]]; then
# No git target detected, flush the git fragment and redisplay the prompt.
if [[ -n "$_prompt_sorin_git" ]]; then
_prompt_sorin_git=''
zle && zle reset-prompt
fi
else
# Git target detected, update the git fragment and redisplay the prompt.
_prompt_sorin_git="${_git_target}${_git_post_target}"
zle && zle reset-prompt
fi
;;
esac
}
function prompt_sorin_async_git {
cd -q "$1"
if (( $+functions[git-info] )); then
git-info
print ${git_info[status]}
fi
}
function prompt_sorin_async_tasks {
# Initialize async worker. This needs to be done here and not in
# prompt_sorin_setup so the git formatting can be overridden by other prompts.
if (( !${prompt_prezto_async_init:-0} )); then
async_start_worker prompt_sorin -n
async_register_callback prompt_sorin prompt_sorin_async_callback
typeset -g prompt_prezto_async_init=1
fi
# Kill the old process of slow commands if it is still running.
async_flush_jobs prompt_sorin
# Compute slow commands in the background.
async_job prompt_sorin prompt_sorin_async_git "$PWD"
}
function prompt_sorin_precmd {
setopt LOCAL_OPTIONS
unsetopt XTRACE KSH_ARRAYS
# Format PWD.
_prompt_sorin_pwd=$(prompt-pwd)
# Handle updating git data. We also clear the git prompt data if we're in a
# different git root now.
if (( $+functions[git-dir] )); then
local new_git_root="$(git-dir 2> /dev/null)"
if [[ $new_git_root != $_sorin_cur_git_root ]]; then
_prompt_sorin_git=''
_sorin_cur_git_root=$new_git_root
fi
fi
# Run python info (this should be fast and not require any async)
if (( $+functions[python-info] )); then
python-info
fi
prompt_sorin_async_tasks
}
function prompt_sorin_setup {
setopt LOCAL_OPTIONS
unsetopt XTRACE KSH_ARRAYS
prompt_opts=(cr percent sp subst)
_prompt_sorin_precmd_async_pid=0
_prompt_sorin_precmd_async_data=$(mktemp "${TMPDIR:-/tmp}/sorin-prompt-async-XXXXXXXXXX")
# Load required functions.
autoload -Uz add-zsh-hook
autoload -Uz async && async
# Add hook for calling git-info before each command.
add-zsh-hook precmd prompt_sorin_precmd
# Set editor-info parameters.
zstyle ':prezto:module:editor:info:completing' format '%B%F{7}...%f%b'
zstyle ':prezto:module:editor:info:keymap:primary' format ' %B%F{1}❯%F{3}❯%F{2}❯%f%b'
zstyle ':prezto:module:editor:info:keymap:primary:overwrite' format ' %F{3}♺%f'
zstyle ':prezto:module:editor:info:keymap:alternate' format ' %B%F{2}❮%F{3}❮%F{1}❮%f%b'
# Set git-info parameters.
zstyle ':prezto:module:git:info' verbose 'yes'
zstyle ':prezto:module:git:info:action' format '%F{7}:%f%%B%F{9}%s%f%%b'
zstyle ':prezto:module:git:info:added' format ' %%B%F{2}✚%f%%b'
zstyle ':prezto:module:git:info:ahead' format ' %%B%F{13}⬆%f%%b'
zstyle ':prezto:module:git:info:behind' format ' %%B%F{13}⬇%f%%b'
zstyle ':prezto:module:git:info:branch' format ' %%B%F{2}%b%f%%b'
zstyle ':prezto:module:git:info:commit' format ' %%B%F{3}%.7c%f%%b'
zstyle ':prezto:module:git:info:deleted' format ' %%B%F{1}✖%f%%b'
zstyle ':prezto:module:git:info:modified' format ' %%B%F{4}✱%f%%b'
zstyle ':prezto:module:git:info:position' format ' %%B%F{13}%p%f%%b'
zstyle ':prezto:module:git:info:renamed' format ' %%B%F{5}➜%f%%b'
zstyle ':prezto:module:git:info:stashed' format ' %%B%F{6}✭%f%%b'
zstyle ':prezto:module:git:info:unmerged' format ' %%B%F{3}═%f%%b'
zstyle ':prezto:module:git:info:untracked' format ' %%B%F{7}◼%f%%b'
zstyle ':prezto:module:git:info:keys' format \
'status' '%b %p %c:%s%A%B%S%a%d%m%r%U%u'
# Set up non-zero return value display
local show_return="✘ "
# Default is to show the return value
if zstyle -T ':prezto:module:prompt' show-return-val; then
show_return+='%? '
fi
# Set python-info format
zstyle ':prezto:module:python:info:virtualenv' format '%f%F{3}(%v)%F{7} '
# Get the async worker set up
_sorin_cur_git_root=''
_prompt_sorin_git=''
_prompt_sorin_pwd=''
# Define prompts.
PROMPT='${SSH_TTY:+"%F{6}%n%f%F{6}@%f%F{6}%m%f "}%F{6}${_prompt_sorin_pwd}%(!. %B%F{1}#%f%b.) MSE: %F{7}'
RPROMPT='$python_info[virtualenv]${editor_info[overwrite]}%(?:: %F{1}'
RPROMPT+=${show_return}
RPROMPT+='%f)${VIM:+" %B%F{6}V%f%b"}${_prompt_sorin_git}'
SPROMPT='zsh: correct %F{1}%R%f to %F{2}%r%f [nyae]? '
}
function prompt_sorin_preview {
local +h PROMPT=''
local +h RPROMPT=''
local +h SPROMPT=''
editor-info 2> /dev/null
prompt_preview_theme 'sorin'
}
prompt_sorin_setup "$@"
My problem is that I do not know what config file could lead to this problem, or where it would be located. I am using Arch Linux with Termite as my terminal emulator.
