2

At first, my hardware:

Motherboard: MSI B550M PRO-VDH WIFI
CPU: AMD Ryzen 3 3100
GPU: MSI GeForce GTX 1050Ti Low Profile
RAM: 2 x 8 GB HYPERX HX432C16PB3A/8
PSU: Chieftec CSN-650C 650W
SSD: ADATA SWORDFISH m.2 2280PCIe Gen3x4
Body: Aerocool Playa Slim

So, the problem is no video signal after launch (tried 3 displays and 3 cables), only 1 long beep and 2 short beeps and thats all. Removing GPU don't fixing the problem, try reassemble it many times with ram too, trying various ram combinations, nothing happens. PC have around 1 month, yesterday everything works fine. Somebody can help me fix that?

Improve this question
5
  • 1
    One long and two short is a video card problem.
    – StainlessSteelRat
    Commented Mar 30, 2021 at 10:14
  • What if you remove RAM completely and power on? Do you hear the same beeps 1 long + 2 short? Repeat that removing external components one at a time like RAM, GPU etc.
    – patkim
    Commented Mar 30, 2021 at 10:14
  • @patkim remove all ram gives 3 long beep, I try today to test GPU, I think that was a issue with motherboard, but all components have warranty.
    – Yardi
    Commented Mar 30, 2021 at 10:19
  • @patkim GPU tested, working on different PC
    – Yardi
    Commented Mar 30, 2021 at 11:42
  • This may not be of much help but just try clearing CMOS and see if that makes any difference. However after this step if by default system speaker is set to OFF in BIOS, beeps will stop.
    – patkim
    Commented Mar 30, 2021 at 19:16

1 Answer 1

Reset to default
1

You can't believe it, the issue is ... HDMI cable. I tried 3 cables and all of them are broken. After using new one from new display, problem just solved.

Improve this answer
1
  • I can't believe it too! ~ I just had a similar issue with my MSI B550 GAMING GEN3 motherboard. A new PC build gave the 1 long and 2 short beeps, indicating a VGA error. Initially, I tried using an old monitor with a DVI connection and onboard graphics, but nothing worked. I then used a dedicated GPU and different RAM combinations, but the issue persisted. Surprisingly, the problem was resolved when I used a dedicated GPU with a new HDMI cable. Why an earth doesn't it boot without a video cable on the onboard graphics, I've tried the onboard HDMI and DVI won't boot.
    – Hevski
    Commented Jun 30 at 13:20

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .