I am using a long-installed Fedora 16 box, and whenever I type "sudo -v", "sudo -l", etc. as a regular user (non-root), I get this output:
[user@* ~]$ sudo -v
env: -v: No such file or directory
[user@* ~]$
Something is causing sudo to think the "-v" is a process to run.
I found this when I was trying to set up NOPASSWD access for a specific executable that I added to /usr/bin, which also isn't working (It still asks for a password).
On a side note, do I need to reload the sudo config or something when I change the /etc/sudoers? Is the /etc/sudoers file even being used in Fedora 16?
Here is my /etc/sudoers config:
## Sudoers allows particular users to run various commands as
## the root user, without needing the root password.
##
## Examples are provided at the bottom of the file for collections
## of related commands, which can then be delegated out to particular
## users or groups.
##
## This file must be edited with the 'visudo' command.
## Host Aliases
## Groups of machines. You may prefer to use hostnames (perhaps using
## wildcards for entire domains) or IP addresses instead.
# Host_Alias FILESERVERS = fs1, fs2
# Host_Alias MAILSERVERS = smtp, smtp2
## User Aliases
## These aren't often necessary, as you can use regular groups
## (ie, from files, LDAP, NIS, etc) in this file - just use %groupname
## rather than USERALIAS
# User_Alias ADMINS = jsmith, mikem
## Command Aliases
## These are groups of related commands...
## Networking
# Cmnd_Alias NETWORKING = /sbin/route, /sbin/ifconfig, /bin/ping, /sbin/dhclient, /usr/bin/net, /sbin/iptables, /usr/bin/rfcomm, /usr/bin/wvdial, /sbin/iwconfig, /sbin/mii-tool
## Installation and management of software
# Cmnd_Alias SOFTWARE = /bin/rpm, /usr/bin/up2date, /usr/bin/yum
## Services
# Cmnd_Alias SERVICES = /sbin/service, /sbin/chkconfig
## Updating the locate database
# Cmnd_Alias LOCATE = /usr/bin/updatedb
## Storage
# Cmnd_Alias STORAGE = /sbin/fdisk, /sbin/sfdisk, /sbin/parted, /sbin/partprobe, /bin/mount, /bin/umount
## Delegating permissions
# Cmnd_Alias DELEGATING = /usr/sbin/visudo, /bin/chown, /bin/chmod, /bin/chgrp
## Processes
# Cmnd_Alias PROCESSES = /bin/nice, /bin/kill, /usr/bin/kill, /usr/bin/killall
## Drivers
# Cmnd_Alias DRIVERS = /sbin/modprobe
# Defaults specification
#
# Disable "ssh hostname sudo <cmd>", because it will show the password in clear.
# You have to run "ssh -t hostname sudo <cmd>".
#
Defaults requiretty
Defaults env_reset
Defaults env_keep = "COLORS DISPLAY HOSTNAME HISTSIZE INPUTRC KDEDIR LS_COLORS"
Defaults env_keep += "MAIL PS1 PS2 QTDIR USERNAME LANG LC_ADDRESS LC_CTYPE"
Defaults env_keep += "LC_COLLATE LC_IDENTIFICATION LC_MEASUREMENT LC_MESSAGES"
Defaults env_keep += "LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER LC_TELEPHONE"
Defaults env_keep += "LC_TIME LC_ALL LANGUAGE LINGUAS _XKB_CHARSET XAUTHORITY"
Defaults secure_path = /sbin:/bin:/usr/sbin:/usr/bin
## Next comes the main part: which users can run what software on
## which machines (the sudoers file can be shared between multiple
## systems).
## Syntax:
##
## user MACHINE=COMMANDS
##
## The COMMANDS section may have other options added to it.
##
## Allow root to run any commands anywhere
root ALL=(ALL) ALL
## Allows members of the 'sys' group to run networking, software,
## service management apps and more.
# %sys ALL = NETWORKING, SOFTWARE, SERVICES, STORAGE, DELEGATING, PROCESSES, LOCATE, DRIVERS
## Allows people in group wheel to run all commands
%wheel ALL=(ALL) ALL
## Same thing without a password
# %wheel ALL=(ALL) NOPASSWD: ALL
## Allows members of the users group to mount and unmount the
## cdrom as root
# %users ALL=/sbin/mount /mnt/cdrom, /sbin/umount /mnt/cdrom
## Allows members of the users group to shutdown this system
# %users localhost=/sbin/shutdown -h now
## Read drop-in files from /etc/sudoers.d (the # here does not mean a comment)
#includedir /etc/sudoers.d
user ALL=(ALL) NOPASSWD: /usr/bin/fastboot*
Note: In the last line of my actual config, I did substitute my username for "user".
Also, I was told you can use *,[0-9], etc. in the sudoers config, and the fastboot command has arguments that I want to give my user all access to. (there are infinite argument possibilities, and I want access to all of them.) Perhaps I am wrong about needing the wildcard, but I have already tried this config file without it and it didn't work either.
And here is my sudo -V output:
Sudo version 1.8.3p1
Configure options: --build=i386-redhat-linux-gnu --host=i386-redhat-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --sbindir=/usr/sbin --libdir=/usr/lib --docdir=/usr/share/doc/sudo-1.8.3p1 --with-logging=syslog --with-logfac=authpriv --with-pam --with-pam-login --with-editor=/bin/vi --with-env-editor --with-ignore-dot --with-tty-tickets --with-ldap --with-selinux --with-passprompt=[sudo] password for %p: --with-linux-audit
Sudoers policy plugin version 1.8.3p1
Sudoers file grammar version 40
Sudoers path: /etc/sudoers
nsswitch path: /etc/nsswitch.conf
ldap.conf path: /etc/ldap.conf
ldap.secret path: /etc/ldap.secret
Authentication methods: 'pam'
Syslog facility if syslog is being used for logging: authpriv
Syslog priority to use when user authenticates successfully: notice
Syslog priority to use when user authenticates unsuccessfully: alert
Ignore '.' in $PATH
Send mail if the user is not in sudoers
Use a separate timestamp for each user/tty combo
Lecture user the first time they run sudo
Require users to authenticate by default
Root may run sudo
Allow some information gathering to give useful error messages
Only allow the user to run sudo if they have a tty
Visudo will honor the EDITOR environment variable
Set the LOGNAME and USER environment variables
Length at which to wrap log file lines (0 for no wrap): 80
Authentication timestamp timeout: 5.0 minutes
Password prompt timeout: 5.0 minutes
Number of tries to enter a password: 3
Umask to use or 0777 to use user's: 022
Path to mail program: /usr/sbin/sendmail
Flags for mail program: -t
Address to send mail to: root
Subject line for mail messages: *** SECURITY information for %h ***
Incorrect password message: Sorry, try again.
Path to authentication timestamp dir: /var/db/sudo
Default password prompt: [sudo] password for %p:
Default user to run commands as: root
Value to override user's $PATH with: /sbin:/bin:/usr/sbin:/usr/bin
Path to the editor for use by visudo: /bin/vi
When to require a password for 'list' pseudocommand: any
When to require a password for 'verify' pseudocommand: all
File descriptors >= 3 will be closed before executing a command
Reset the environment to a default set of variables
Environment variables to check for sanity:
TERM
LINGUAS
LC_*
LANGUAGE
LANG
COLORTERM
Environment variables to remove:
RUBYOPT
RUBYLIB
PYTHONUSERBASE
PYTHONINSPECT
PYTHONPATH
PYTHONHOME
TMPPREFIX
ZDOTDIR
READNULLCMD
NULLCMD
FPATH
PERL5DB
PERL5OPT
PERL5LIB
PERLLIB
PERLIO_DEBUG
JAVA_TOOL_OPTIONS
SHELLOPTS
GLOBIGNORE
PS4
BASH_ENV
ENV
TERMCAP
TERMPATH
TERMINFO_DIRS
TERMINFO
_RLD*
LD_*
PATH_LOCALE
NLSPATH
HOSTALIASES
RES_OPTIONS
LOCALDOMAIN
CDPATH
IFS
Environment variables to preserve:
XAUTHORITY
_XKB_CHARSET
LINGUAS
LANGUAGE
LC_ALL
LC_TIME
LC_TELEPHONE
LC_PAPER
LC_NUMERIC
LC_NAME
LC_MONETARY
LC_MESSAGES
LC_MEASUREMENT
LC_IDENTIFICATION
LC_COLLATE
LC_CTYPE
LC_ADDRESS
LANG
USERNAME
QTDIR
PS2
PS1
MAIL
LS_COLORS
KDEDIR
INPUTRC
HISTSIZE
HOSTNAME
DISPLAY
COLORS
Locale to use while parsing sudoers: C
Directory in which to store input/output logs
File in which to store the input/output log
Add an entry to the utmp/utmpx file when allocating a pty
Local IP address and netmask pairs:
192.168.1.88/255.255.255.0
fe80::216:76ff:feb2:49a2/ffff:ffff:ffff:ffff::
fe80::214:d1ff:fed5:60e9/ffff:ffff:ffff:ffff::
Sudoers I/O plugin version 1.8.3p1
If someone could help me fix these 2 issues, that would be nice. To be honest, if someone could tell me why fastboot (Android partition flash tool, through USB) needs root access on my linux box, and then show me an easier way to make that run without asking for root access, that would be nice. My old linux didn't need root access for fastboot for some reason.
Also, please keep security in mind. I do not plan to allow everything to be run as root without requiring a password. Thank you.
I just found this in my .bashrc:
alias sudo='sudo env PATH=$PATH'
I forgot I added it. I had had some issues in the past with $PATH orders.
I removed the line, and my problems are now fixed. Thanks...I guess. *sighs I'm a power user and I always seem to fix my own problem. I can honestly say I have done so for almost 5 years now without anyone helping. This is sad.