Recently, I bought this: https://www.dustinhome.se/product/5010763579/displayport-to-hdmi-adapter
It was not cheap and it feels quite heavy and quality-ish in my hand. I'm not at all convinced that the error is simply that there is something wrong with it. It seems like too simple of a device to really "break" in that sense.
My tests:
- I plug a HDMI cable into my Raspberry Pi and into the HDMI connector on a TV. The RPI's picture is shown. Thus, I make the conclusion that there is nothing wrong with the RPI nor the HDMI cable.
- I plug the very same HDMI cable into the very same Raspberry Pi and, since my computer monitor does not have a HDMI socket, but only DisplayPort, I plug the other end of the HDMI cable into my "Displayport To HDMI Adapter", which I then plug into the DisplayPort connector on the monitor. There is no picture signal whatsoever. The simple conclusion would be that the adapter is faulty, but I'm not convinced.
I have repeated these steps many times, to rule out any "loose cables", etc. I have also specifically set the video mode on the monitor to "DisplayPort", rather than "auto", just to make 100% clear to the monitor that it's supposed to be displaying the HDMI-turned-DisplayPort signal and nothing else. (Besides, nothing else is connected to the monitor anyway.)
Another reason I don't think the adapter is physically/electronically "fried" is that I've in the past had similar issues when I tried to use various adapters for video signals. It seems like a common problem, but it makes no sense to me. What exactly is the problem? As far as the monitor is concerned, I have plugged in a DisplayPort video output device -- not a HDMI one. After all, that is the whole point of the adapter!
I also should point out that I have turned the RPI off/on again several times, with the HDMI cable already plugged in.
What could be wrong?