6
$\begingroup$

The ISS recently jettison some garbage and expects it to take 2-4 years to de-orbit and burn up.

From Gizmodo's ISS Ditches 2.9-Ton Pallet of Batteries, Creating Its Most Massive Piece of Space Trash:

The pallet is packed with nickel-hydrogen batteries, and it will stay in low Earth orbit for the next two to four years “before burning up harmlessly in the atmosphere,” according to a NASA statement. SpaceFlightNow reports that the pallet is the “most massive object ever jettisoned from the orbiting outpost.”

How come they don't give it a little extra push towards earth and have it de-orbit sooner?

Or perhaps they did shove it as hard as they could and this is just how long it takes.

It just seems logical that they would want to get it out of the way ASAP.

Improve this question
$\endgroup$
7
  • $\begingroup$ Welcome to Space SE. Could you put a reference in for that event? $\endgroup$
    – Puffin
    Commented Mar 16, 2021 at 18:01
  • $\begingroup$ The Canadarm2 can only move at 0.6m/s, and that is unloaded. velocity quickly drops with load. You can't simply "push harder" with an apparatus like that. Yes, the SSRMS can handle masses of up to 100 tons, but not whip them around with ease. I'm not an expert on the load limits of that system though, so I can't really tell you the maximum operational limits for a 2.9 ton payload like the garbage pallet. But 0.6m/s is the upper bound anyways. $\endgroup$
    – Polygnome
    Commented Mar 16, 2021 at 18:01
  • $\begingroup$ @Polygnome where'd you get the 0.6 number? That's different from what I remember. 0.6 is close to the number for the shuttle arm, but the SSRMS is about half that IIRC $\endgroup$
    – Organic Marble
    Commented Mar 16, 2021 at 20:39
  • $\begingroup$ Because the extra push would take extra energy they'd like to reserve for more important things, maybe... They probably could hurry the garbage down if it was important, but since it's hurting no one to have some lithium-battery satellites orbiting earth for a few years, then why waste the fuel? That's my guess. Fuel is very expensive to ship up there. $\endgroup$
    – user39728
    Commented Mar 17, 2021 at 3:23
  • $\begingroup$ @OrganicMarble Its possible I mixed up the Shuttle and ISS arm when looking up the numbers. Doesn't really change the sentiment of my comment, though, since its the same magnitude. You simply won't get much acceleration out of the arm. $\endgroup$
    – Polygnome
    Commented Mar 17, 2021 at 10:46

3 Answers 3

Reset to default
6
$\begingroup$

I assume you refer to the jettison of the garbage pallet containing the old batteries, which came in at about 2.9 tons. Those were jettisoned using the Canadarm2.

The Canadarm2 has the following operational limits:

Speed of Operations

  • Unloaded: 37 centimeters / second (1.21 feet / second)
  • Loaded:
    • Station Assembly - 2 centimeters / second (.79 inches / second)
    • EVA Support - 15 centimeters / second (5.9 inches / second)
    • Orbiter - 1.2 centimeters / second (.47 inches / second)

(Numbers from Canadarm2 and the Mobile Servicing Subsystem)

I am not exactly sure where on this range the pallet falls - but presumably somewhere between 2cm/s and 15cm/s. The upper limits is 37cm/s.

Orbital velocity of the ISS is ~7660m/s. That means the pallet can only get about 0.005% of change of velocity from the arm.

Combine this with the fact that the pallet is very dense and has a small-ish cross-sectional area, the ballistic coefficient is rather high, so it doesn't experience much drag (compared to a large, light object).

Going by this Q&A, jettisoning stuff by hand yields velocities of about 0.6m/s, but only for stuff that is significantly lighter than 2.9 tons.

@Uwe already gave a good comparison with the Shuttle, which needed 90m/s for the re-entry burn. The jettison was done with 0.37m/s.

You can not simply "push harder" because of the operational limits of the Canadarm2 and the human body, depending on who does the jettison.

And with such a small change in velocity, it takes a while to de-orbit. Which doesn't really matter. Making it de-orbit faster would incurs high costs for no apparent benefit.

Improve this answer
$\endgroup$
7
  • $\begingroup$ I was with you until the 'human body' bit. Relevance? The SSRMS controls don't require strength to operate. $\endgroup$
    – Organic Marble
    Commented Mar 17, 2021 at 12:31
  • 2
    $\begingroup$ @OrganicMarble No, but not all garbage is jettisoned using the arm. In this case it was, but at other times it was done by literally pushing the garbage away with body strength, e.g. here: twitter.com/Space_Station/status/1354461242610642945 $\endgroup$
    – Polygnome
    Commented Mar 17, 2021 at 12:34
  • $\begingroup$ Oh, ok. I thought you meant who was flying the arm to jettison the p/l. I could pick some robo nits with this but I like it well enough for a +1 $\endgroup$
    – Organic Marble
    Commented Mar 17, 2021 at 12:35
  • 1
    $\begingroup$ @OrganicMarble I've changed the list markup a bit, its now much clearer. $\endgroup$
    – Polygnome
    Commented Mar 17, 2021 at 13:58
  • 1
    $\begingroup$ There's also the tiny issue of recoil; you may not want to push any harder in order to minimize the momentum change on the ISS itself. I'm sure the mass differential is big enough that it wouldn't be worth worrying about, but there is a point where you could push hard enough to significantly affect the ISS' orbit. $\endgroup$
    – John Bode
    Commented Mar 17, 2021 at 17:28
4
$\begingroup$

There are two main reasons it takes so long:

  1. lots of mass and very little delta-v.
  2. a large ballistic coefficient.

The first is due to the limitation of the deployment mechanism. The second means that the drag takes longer than say a flimsy structure.

Improve this answer
$\endgroup$
10
  • 3
    $\begingroup$ @user39728 because it obviously does. Dense bodies tend to have high ballistic coefficients. Suggest you read the wikipedia article. $\endgroup$
    – Organic Marble
    Commented Mar 17, 2021 at 3:40
  • 1
    $\begingroup$ In the region we are talking about, we are dealing with rarefied gas dynamics. For quick looks, this is simply about density. Batteries are dense. $\endgroup$
    – Erik
    Commented Mar 17, 2021 at 4:38
  • 1
    $\begingroup$ OK, you know better than I do, but to say "because it obviously does" is hardly a good way to start an answer. Educate me so I can ask less stupid questions next time ;-) $\endgroup$
    – user39728
    Commented Mar 17, 2021 at 4:39
  • 2
    $\begingroup$ @user39728 what can you throw farther : a beach ball, a small plastic ball, or a golf ball? $\endgroup$
    – eps
    Commented Mar 17, 2021 at 6:34
  • 1
    $\begingroup$ @user39728 One way to look at it is to use a related concept, the coefficient of drag $c_d$. Given a fluid (liquid or gas) with density $\rho$ and an object moving through the fluid with a velocity $v$ and a cross section $A$ to the fluid, the force on the object is $F=\frac12 \rho v^2 c_d A$. Shape is important for aircraft, watercraft, and cars. It is not important at all for things in the very low density upper atmosphere. A standard value for $c_d$ in the upper atmosphere is 2.2. In comparison, a very good parachute (which are designed to be rather non-aerodynamic) has a $c_d$ of 1.5. $\endgroup$
    – David Hammen
    Commented Mar 18, 2021 at 2:38
2
$\begingroup$

The Space shuttle did a deorbit burn for three minutes to decrease the orbital velocity by only 1 %. This delta v was only 90 m/s. But 90 m/s are 324 km/h, much more than a little extra push. A slow walker needs about 10 minutes for one km, 1.67 m/s or 6 km/h.

If the gentle push is similar to the slow walkers speed, it is only 1.85 % of the neccessary delta v of 90 m/s. The deorbit burn speed is comparable to a ICE-3 high-speed electric multiple unit train licensed for 330 km/h.

Try to imagine an ICE-3 passing by at full speed in a distance of some 20 m. Is this like a gentle push?

Improve this answer
$\endgroup$

Not the answer you're looking for? Browse other questions tagged or ask your own question.