Anybody have a copy of the specifications for the Interim Control Module? Particularly interested in mass, either dry or fully loaded...or both!
Add a comment
|
1 Answer
$\begingroup$
$\endgroup$
3
A problem with getting detailed info on the ICM is that it was based on a classified spacecraft. Even when I worked at JSC, details were scant.
Here is the best info I've seen in the wild, from the January 20, 1997 issue of Aviation Week. I can't give a direct link since it's behind a paywall, but here is an excerpt (sorry that it's an image, that is how the archives are stored).
The April 14, 1997 issue contained a schematic drawing of the ICM docked to the proto-ISS. At this point the ISS (exclusive of the ICM) consisted of Node 1, the FGB, three conical Pressurized Mating Adaptors, and the Z1 truss segment. A Soyuz is shown docked.
answered Jul 28, 2017 at 17:54
-
$\begingroup$ Thank you! Any guesses out there as to what four 15-foot wide, 5 foot tall isogrid panels would weigh? The TLD/ICM's core structure was made up of four isogrid (like Delta tank) panels. $\endgroup$ Commented Jul 28, 2017 at 18:39
-
$\begingroup$ That is way smaller than I ever envisioned from reading about it over the years. Interesting, thanks for that one! $\endgroup$– geoffcCommented Jul 28, 2017 at 18:43
-
2$\begingroup$ Using the ISOGRID Design Handbook from the NASA Reports Server (Report CR 124075) I was able to come up with a weight of 2182 pounds for the panels. THIS IS A ROM ESTIMATE, if not an outright SWAG, but is a starting point for estimating the ICM's mass. Note that ISOGRID panels use triangular webs while the TLD/ICM used square webs, but still should be in the ballpark $\endgroup$ Commented Jul 29, 2017 at 20:11