For my first post on Stack Exchange I have a situation that seems to be impossible: fast internet on cables that show no continuity.
I just installed 16 Cat6 ethernet runs in an office. All of them are under 100 feet and most are under 50 feet. The 10 shortest runs have no troubles at all. All 16 runs tested good for continuity when installation was completed. Four days later I re-tested all of them because one wasn't working right (fixed by re-terminating, one wire was a little loose). With the second testing, the 6 longest runs have the oddest results I've ever seen:
- No continuity on any of the 8 wires. Four different testers agree. (Two NETcat NC-100 from Greenlee and two IPC testers.)
- Excellent internet speeds. > 500/500 Mbps after hours, roughly what the ISP provides. Measured from my laptop with wifi turned off.
My internet searching only turns up the opposite problem in which continuity is good but there's no internet. That's not my situation.
Any ideas what could be going on?
That situation and possibly solving it is my top concern. ("Possibly" solving it because the cables are working, after all.) The discussion could easily turn to getting better testing equipment. I am open to that and interested in suggestions. Part of the context is that my shop is a small, rural, jack-of-all-trades shop which is primarily a managed service provider for small businesses and residential customers. We rarely pull more than 5,000 feet of ethernet cable per year, and none of our customers (so far) ask for cable certification results. A high-end tester for $2k or more would be excellent and might be what we get, but the return on investment would be much less than it would for a tech whose main job is pulling data cables.