Skip to content
/ coffer Public

Simply ACID* key-value database. At the medium or even low latency it tries to provide greater throughput without losing the ACID properties of the database. The database provides the ability to create record headers at own discretion and use them as transactions. The maximum size of stored data is limited by the size of the computer's RAM.

License

Notifications You must be signed in to change notification settings

claygod/coffer

Repository files navigation

GoDoc Mentioned in Awesome Go Travis CI Go Report Card codecov

Coffer

Simply ACID* key-value database. At the medium or even low latency it tries to provide greater throughput without losing the ACID properties of the database. The database provides the ability to create record headers at own discretion and use them as transactions. The maximum size of stored data is limited by the size of the computer's RAM.

*is a set of properties of database transactions intended to guarantee validity even in the event of errors, power failures, etc.

Properties:

  • high throughput
  • tolerated latency
  • high reliability

ACID:

  • good durabilty
  • compulsory isolation
  • atomic operations
  • consistent transactions

Table of Contents

Usage

package main

import (
	"fmt"

	"github.com/claygod/coffer"
)

const curDir = "./"

func main() {
	// STEP init
	db, err, wrn := coffer.Db(curDir).Create()
	switch {
	case err != nil:
		fmt.Println("Error:", err)
		return
	case wrn != nil:
		fmt.Println("Warning:", err)
		return
	}
	if !db.Start() {
		fmt.Println("Error: not start")
		return
	}
	defer db.Stop()

	// STEP write
	if rep := db.Write("foo", []byte("bar")); rep.IsCodeError() {
		fmt.Sprintf("Write error: code `%d` msg `%s`", rep.Code, rep.Error)
		return
	}

	// STEP read
	rep := db.Read("foo")
	if rep.IsCodeError() {
		fmt.Sprintf("Read error: code `%v` msg `%v`", rep.Code, rep.Error)
		return
	}
	fmt.Println(string(rep.Data))
}

Examples

Use the following links to find many examples how use the transactions:

API

Started DB returns reports after has performed an operation. Reports containing:

  • code (error codes here: github.com/claygod/coffer/reports/codes)
  • error
  • data
  • other details Reporting structures read here:: github.com/claygod/coffer/reports

Methods

  • Start
  • Stop
  • StopHard
  • Save
  • Write
  • WriteList
  • WriteListUnsafe
  • Read
  • ReadList
  • ReadListUnsafe
  • Delete
  • DeleteListStrict
  • DeleteListOptional
  • Transaction
  • Count
  • CountUnsafe
  • RecordsList
  • RecordsListUnsafe
  • RecordsListWithPrefix
  • RecordsListWithSuffix

Pay attention!

All requests which names contain Unsafe can be usually executed in both cases: when the database is running or stopped (not running). In the second case (when DB is stopped), should not make requests in parallel, because in this case the consistency of DB can be compromised and data lost.

Other methods work only if the database is running.

Start

The Follow interactor turns on while running a database. It controls the relevance of the current checkpoint.

Stop

Stop DB. If you want to periodically stop and start the database in your application, probably, you may want to create a new client when the DB has been stopped.

Write

Write a new record in a database specifying the key and value. Their length must satisfy the requirements specified in configuration files.

WriteList

Write several records to the database specifying corresponding map in the arguments.

Strict mode (strictMode=true): The operation performs if there are no records with these keys. A list of existed records is returned.

Optional mode (strictMode=false): The operation performs regardless of whether there are records with these keys or not. A list of existed records is returned.

Important: this argument is a reference argument; it cannot be changed in the called code!

WriteListUnsafe

Write several records to the database specified the corresponding map in the arguments. This method exists in order to fill the database faster before it starts. The method is not for parallel use.

Read

Read one record from the database. In the received report there will be a result code. If it is positive, that means that the value in the right data field.

ReadList

Read several records. There is a limit on the maximum number of readable records in the configuration. Except found records the list of not found records is returned.

ReadListUnsafe

Read several records. The method can be called when the database is stopped (not running). The method is not for parallel use.

Delete

Remove a single record.

DeleteList

Strict mode (true): Delete several records. It is possible only if all records are in the database. If at least there is a lack of one record, none of records will be deleted.

Optional mode (false): Delete several records. All found records from the list in will be deleted in DB.

Transaction

Make a transaction. The transaction should be added in the database at the stage of creating and configuring. The user of the database is responsible for the consistency of the functionality of transaction handlers between different runs of the database. The transaction returns new values which are stored in the DB.

Count

Get the number of records in the database. A request can be made only when the database has started.

CountUnsafe

Get the number of records in the database. Requests to a stopped (or not running), database cannot be made in parallel!

RecordsList

Get a list of all database keys. With a large number of records in the database, the request will be slow. Use it only at great need to avoid problems. The method works only when the database is running.

RecordsListUnsafe

Get a list of all database keys. With a large number of records in the database, the request will be slow. Use it only at great need to avoid problems. The method is not for parallel use while using a request when database is stopped (or not running).

RecordsListWithPrefix

Get a list of all keys with prefix specified in the argument (prefix is the begging of record string).

Config

If you specify the path to the database directory all configuration parameters will be reset to the default:

cof, err, wrn := Db(dirPath) . Create()

Default values can be found in the /config.go file. But each of the parameters can be configured:

	Db(dirPath).
	BatchSize(batchSize).
	LimitRecordsPerLogfile(limitRecordsPerLogfile).
	FollowPause(100*time.Second).
	LogsByCheckpoint(1000).
	AllowStartupErrLoadLogs(true).
	MaxKeyLength(maxKeyLength).
	MaxValueLength(maxValueLength).
	MaxRecsPerOperation(1000000).
	RemoveUnlessLogs(true).
	LimitMemory(100 * 1000000).
	LimitDisk(1000 * 1000000).
	Handler("handler1", &handler1).
	Handler("handler2", &handler2).
	Handlers(map[string]*handler).
	Create()

Db

Specify the work directory where the database will store files. In case of a new database the directory should not contain files with the “log”, “check”, “checkpoint” extensions.

BatchSize

The maximum number of records which database can add at a time (this applies to setting up internal processes; this does not apply to the number of records added at a time). Decreasing of this parameter slightly improves the latency (but not too much). Increasing of this parameter slightly degrades the latency, but at the same time increases the throughput.

LimitRecordsPerLogfile

A number of operations which is going to be written to one log file. Small number forces the database creates new files very often, and it adversely affects the speed of the database. A big number reduces the number of pauses while creating files, but the size of files increases.

FollowPause

The size of the time interval for starting the Follow interactor, which analyzes old logs and periodically creates new checkpoints.

LogsByCheckpoint

The option specifies after how many full log files it is necessary to create a new checkpoint (the smaller number, the more often it should be created). For good productivity, it’s better not to do it too often.

AllowStartupErrLoadLogs

The option allows the database works at startup, even if the last log file was completed incorrectly, i.e. the last record is corrupted (a typical situation for an abnormal shutdown). By default, the option is enabled.

MaxKeyLength

This is the maximum allowable key length.

MaxValueLength

This is the maximum size of the value length.

MaxRecsPerOperation

This is the maximum number of records that is possible per operation.

RemoveUnlessLogs

The option is for deleting old files. After Follow has created a new checkpoint, with the permission of this option, it removes unnecessary operations logs. If for some reason it’s needed to store the whole log of operations, this option can be disabled. But be ready that this will increase the consumption of disk space.

LimitMemory

This is the minimum size of free RAM. When this limit reaches, the database terminates all operations and stops to avoid data loss.

LimitDisk

This is the minimum amount of free space on the hard drive. When this limit reaches, the database terminates all operations and stops to avoid data loss.

Handler

Add a transaction handler. It is important that the name of the handler and the results of its work should be idempotent while running the same database at different time. Otherwise handlers will work differently and it will leads to a violation of data consistency. If you intend to make changes to handlers time to time, adding a version number to the key helps streamline this process.

Conditions:

  • The argument passed to the handler must be a number (a slice of bytes).
  • If you need to transfer complex structures, it must be serialized into bytes.
  • The handler can only operate on existing records.
  • The handler cannot delete database records.
  • The handler should return the new values of all the requested records at the end of his work.
  • The number of records modified with the header is specified in the MaxRecsPerOperation configuration.

Example of a handler without using an argument

func HandlerExchange(arg []byte, recs map[string][]byte) (map[string][]byte, error) {
	if arg != nil {
		return nil, fmt.Errorf("Args not null.")
	} else if len(recs) != 2 {
		return nil, fmt.Errorf("Want 2 records, have %d", len(recs))
	}
	recsKeys := make([]string, 0, 2)
	recsValues := make([][]byte, 0, 2)
	for k, v := range recs {
		recsKeys = append(recsKeys, k)
		recsValues = append(recsValues, v)
	}
	out := make(map[string][]byte, 2)
	out[recsKeys[0]] = recsValues[1]
	out[recsKeys[1]] = recsValues[0]
	return out, nil
}

Example of a handler using an argument

func HandlerDebit(arg []byte, recs map[string][]byte) (map[string][]byte, error) {
	if arg == nil || len(arg) != 8 {
		return nil, fmt.Errorf("Invalid Argument: %v.", arg)
	} else if len(recs) != 1 {
		return nil, fmt.Errorf("Want 1 record, have %d", len(recs))
	}
	delta := bytesToUint64(arg)
	var recKey string
	var recValue []byte
	for k, v := range recs {
		recKey = k
		recValue = v
	}
	if len(recValue) != 8 {
		return nil, fmt.Errorf("The length of the value in the record is %d bytes, but 8 bytes are needed", len(recValue))
	}
	curAmount := bytesToUint64(recValue)
	newAmount := curAmount + delta
	if curAmount > newAmount {
		return nil, fmt.Errorf("Account overflow. There is %d, a debit of %d.", curAmount, delta)
	}
	return map[string][]byte{recKey: uint64ToBytes(newAmount)}, nil
}

Handlers

Add several handlers to the database at once. Important: handlers with matching keys are overwritten.

Create

A mandatory command (must be the last one) finishes the configuration and creates the database.

Launch

Start

At starting DB, the number in the end should be a checkpoint. If it is not, the database has been stopped incorrectly. In this “error” case the last available checkpoint and all logs after the checkpoint are loaded until it is possible.

Load the data until it is possible and finish the loading (there is must be a broken log (log with uncompleted data) or last log which has created before database has been stopped incorrectly, so you can load all available data). After all available data has loaded the database creates a new checkpoint. Only after it you can continue work with code.

Follow

After the database has been started, it writes all operations to a log. As a result, the log file can greatly grow. If at the end of the application work the database is correctly stopped, a new checkpoint appears. At the next start of DB, the data will be taken from it.

But if the database is incorrectly stopped a new checkpoint will not be created. In this case, at a new start of DB, the database loads the old checkpoint and re-performs all operations that has been completed and recorded in the log. This process can take much time, and as a result, the database will be loading for a long time (not always acceptable for applications).

That is why there is the follower mechanism in the database that methodically goes through the logs while working of the database and periodically creates checkpoints which are closer to the current moment. Also, the follower has a functionality to clean old logs and checkpoints in order to free up the space of hard drive.

Data storage

Your data is stored as files in the directory that has been specified while creating the database. Files with the log extension contain a description of completed operations. Files with the checkpoint extension contain snapshots of the database state at a certain point. Files with the check extension contain an incomplete snapshot of the database state. Using the RemoveUnlessLogs configuration parameter, you can force the database to delete old and unnecessary files in order to save the disk space.

If the database is stopped in the regular mode, the last file, which has been written to the disk, is the checkpoint file. The number of the checkpoint will be the maximum number. If the database is stopped incorrectly, most likely that files with the log or check extensions will have the maximum number.

Attention! Before the database has not been completely stopped, it is forbidden to carry out any operations with database files.

If you want to copy the database to somewhere, you must copy all content of the directory. If you want to take a minimum of files while copying, then you need: to copy the file with the checkpoint extension (which has the maximum number), and all files with the log extension (which have bigger number than copied file with the checkpoint extension).

Data loading after an incorrect shutdown

If the application work, which is using the database, is not completed correctly, then at the next staring the application, the database will try to find the last valid snapshot of the checkpoint state.

When the file is found, the database will upload it, and then upload all the log files with big numbers. We expect that the last log file might not be filled completely because during the recording the work could be interrupted.

Only undamaged part is uploaded from the damaged file and after that the database uploading is considering as completed.

At the end of the uploading, the database creates a new checkpoint. If system crashes occur during the start (loading) of the database, it possible to get errors and violation of data consistency.

Error Codes

Error codes are stored here: github.com/claygod/coffer/reports/codes If the Ok code is received, the operation is finished completely. If the Code contains Error (the operation has not been completed or not fully completed, or completed with an error), you can continue working with the database. If the code contains Panic, you cannot continue working with the database because of it stage.

Code List

  • Ok - done without comment
  • Error - not completed or not fully completed, but you can continue to work
  • ErrRecordLimitExceeded - record limit per operation exceeded
  • ErrExceedingMaxValueSize - value is too long
  • ErrExceedingMaxKeyLength - key is too long
  • ErrExceedingZeroKeyLength - key is too short
  • ErrHandlerNotFound - no handler found
  • ErrParseRequest – preparing of logging request was failed
  • ErrResources - not enough resources
  • ErrNotFound - no keys are found
  • ErrReadRecords - reading records error for a transaction (if there is a lack of at least one record, a transaction cannot be performed)
  • ErrHandlerReturn - found and uploaded handler returned an error
  • ErrHandlerResponse - handler returned incomplete reply
  • Panic - not finished, further work with the database is impossible
  • PanicStopped – application has been stopped
  • PanicWAL - an error occurred in the operation log

Code checks through methods

In order not to export data to an application (which works with a database), reports have methods:

  • IsCodeOk - done without comment
  • IsCodeError - not completed or not fully completed, but you can continue to work
  • IsCodeErrRecordLimitExceeded - record limit for one operation is exceeded
  • IsCodeErrExceedingMaxValueSize - value is too long
  • IsCodeErrExceedingMaxKeyLength - key is too long
  • IsCodeErrExceedingZeroKeyLength - key is too short
  • IsCodeErrHandlerNotFound - no handler found
  • IsCodeErrParseRequest - preparing of logging request was failed
  • IsCodeErrResources - not enough resources
  • IsCodeErrNotFound - no keys are found
  • IsCodeErrReadRecords - reading records error for a transaction (if there is a lack of at least one record, a transaction cannot be performed)
  • IsCodeErrHandlerReturn – found and uploaded handler returned an error
  • IsCodeErrHandlerResponse - handler returned incomplete reply
  • IsCodePanic - not finished, further work with the database is impossible
  • IsCodePanicStopped – application has been stopped
  • IsCodePanicWAL - error occurred in the operation log

It is not very convenient to make large switches to check the received codes. You can limit yourself to just three checks:

  • IsCodeOk - done without comment
  • IsCodeError - not completed or not fully completed, but you can continue to work (covers ALL errors)
  • IsCodePanic - not completed, further work with the database is not possible (covers ALL panics)

Benchmark

  • BenchmarkCofferWriteParallel32LowConcurent-4 100000 12933 ns/op
  • BenchmarkCofferTransactionSequence-4 2000 227928 ns/op
  • BenchmarkCofferTransactionPar32NotConcurent-4 100000 4132 ns/op
  • BenchmarkCofferTransactionPar32HalfConcurent-4 100000 4199 ns/op

Dependencies

  • github.com/shirou/gopsutil/disk
  • github.com/shirou/gopsutil/mem
  • github.com/sirupsen/logrus

TODO

  • the log should start a new log at startup
  • study out the names of checkpoints and logs (numbering logic)
  • launch and work of follower
  • cleaning unnecessary logs via follower
  • provide an opportunity not to delete old logs, add a test!
  • loading from broken files to stop loading, but work must continue (AllowStartupErrLoadLogs)
  • cyclic loading of checkpoints until they run out (with errors)
  • returns not errors, but reports of work that’s been completed
  • add DeleteOptional, and add it in Operations too
  • test Count
  • Write test
  • Read test
  • Delete test
  • Transaction test
  • test RecordsList
  • test RecordsListUnsafe
  • test RecordsListWithPrefix
  • test RecordsListWithSuffix
  • ReadListUnsafe test
  • boot test with a broken log (last, the rest are ok)
  • boot test with broken checkpoint
  • boot test with a broken log and another the log which follow after
  • transaction usage test
  • for convenience of testing do WriteUnsafe
  • ~~ what for WriteUnsafeRecord is need in Checkpoint ? (for recording at startup?) ~~ alternative to WriteListUnsafe (faster)
  • benchmark of competitive and non-competitive records
  • benchmark reading competitive
  • benchmark write and read in competitive mode
  • benchmark competitive transactions in parallel mode
  • at boot - when files are broken, the “wrn” may returns, not “err”
  • study out the log and the batch, why at fast record they get to the following log
  • interception of panics at the root of the application and at the level of use cases
  • ~~ during transactions, you can delete some of the records from participating (! need for a question!) ~~
  • testing auxiliary helpers
  • while creating a database immediately add a list of handlers because the uploading from logs happens instantly
  • add a convenient configurator while creating a database
  • translate comments into English
  • clear code from old artifacts
  • create a directory for documentation
  • create a directory for examples
  • make a simple example with writing, transaction and reading
  • make an example with financial transactions
  • error handling example
  • test the linter and eliminate all incorrectness in the code
  • add Usage / Quick start text to readme
  • description of error codes
  • configuration description
  • in the description specify third-party packages (as dependencies)
  • add methods for reports in order to check for all errors like IsErrBlahBlahBlah
  • transfer all imported packages to distribution
  • switch from WriteUnsafeRecord to WriteListUnsafe
  • add ReadListUnsafe for an ability to read when the database is stopped
  • add RecordsListUnsafe, which can work with the stopped and running database
  • get a list of keys with a condition of a prefix: RecordsListWithPrefix
  • get a list of keys with a condition of a suffix: RecordsListWithSuffix
  • remove the Save method
  • returns new values in the report during a transaction
  • check returned value in tests
  • start numbering with big numbers, for example million or a billion (more convenient for sorting files)
  • give a correct description-comment for all public methods
  • create description for error returns and warnings in the Create method
  • pause in the batcher - check its size, set the optimal size
  • add in the description that the data is stored both on disk and in memory during the operation of the database
  • method for getting all log files and checkpoints
  • method for viewing a log file
  • method of viewing a checkpoint file
  • the method of strict adding record into the database (only if the record with such a key has not already existed)
  • add a method to view the status of the database

Copyright © 2019-2022 Eduard Sesigin. All rights reserved. Contacts: claygod@yandex.ru

About

Simply ACID* key-value database. At the medium or even low latency it tries to provide greater throughput without losing the ACID properties of the database. The database provides the ability to create record headers at own discretion and use them as transactions. The maximum size of stored data is limited by the size of the computer's RAM.

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages