Jump to content

VAL 208

From Wikipedia, the free encyclopedia
VAL 208
VAL 208 train on the Toulouse viaduct
In service2001–present
ManufacturerSiemens Mobility, Simmering-Graz-Pauker
Built atVienna, Austria
Family nameVéhicule Automatique Léger
Formation2 cars per trainset
Specifications
Car body constructionAluminium alloy
Car length13.07 m (42 ft 10+58 in)
Width2.08 m (6 ft 9+78 in)
Height3.27 m (10 ft 8+34 in)(without air conditioning)
3.7 m (12 ft 1+58 in)(with air conditioning)
Doors3 per side
Maximum speed80 km/h (50 mph)
Traction systemIGBT VVVF
Traction motors8 × MTS-14 65 kW (87 hp) brushless DC synchronous motor
Power output520 kW (700 hp)
TransmissionParallel Cardan drive
Acceleration1.3 m/s2 (4.3 ft/s2)
Deceleration1.3 m/s2 (4.3 ft/s2)
Power supply750 V DC third rail
BogiesSF-VAL208
Safety system(s)ATC (ATO)
Track gauge1,620 mm (5 ft 4 in)

The VAL 208 is one of the VAL series, an automated guideway transit system developed by Matra and Siemens. The vehicles are manufactured at Siemens SGP (Simmering-Graz-Pauker) in Vienna, Austria.

It has been adopted by multiple railway operators since 2000.

The number 208 in the name comes from the fact that the width of the vehicle is 208 cm (6 ft 9+78 in).

In the successor to VAL 206, the system is compatible with VAL 206. Normally, automatic operation is performed, but it is possible for the driver to manually operate as necessary.

Overview

[edit]

Because of automatic operation[citation needed], the delay is small, the train density can be increased. On the other hand, since this train is basically a two-car train, it is suitable for low-population areas and medium-sized cities.

Interior

[edit]

Although the vehicle is small, the window is large, so it is a car with open feeling. Due to the relatively cooler and less humid climate of Europe, air conditioning is not included in the basic specification, but is installed only on the Uijeongbu Light Rail Transit rolling stock in South Korea.

Plastics are widely used for many parts, but doors and handrail are made of stainless steel.

The color tone inside the car varies depending on the railway operator.

Interior (at Lille Metro)

Traction equipments

[edit]
Bogie

The traction control system equips Low-voltage IGBT Chopper control.

The traction motor adopted Alstom's brushless DC motor. The traction motor was self-ventilated, mounted on bogie. It is mounted inside each wheel, and the power from the traction motor is transmitted via the planetary gear and the Cardan joint mechanism.

Traction motor

VAL208NG

[edit]

A minor change has been done several times in VAL 208, and a major change in specification was made in VAL 208 NG which is a minor change car in 2006. Specific changes are as follows.

  • Abolition of VAL 208 logo
  • Abolition of the Matra logo that was on the door
  • Reduction of noise by reviewing traction motor specifications
  • Change of structure of the door
  • Weight saving

Use of the VAL208

[edit]
Country Locality Operator Type Remarks
 France Paris(Charles de Gaulle Airport) Paris-Charles de Gaulle Airport(CDGVAL) VAL208NG

VAL208NG2

Lille Transpole(Lille Metro) VAL208
Rennes STAR(Rennes Metro) VAL208

VAL208NG VAL208NG2

Toulouse Tisséo(Toulouse Metro)
 Italy Turin GTT(Turin Metro) VAL208

VAL208NG

 South Korea Uijeongbu Uijeongbu Light Rail Transit(U Line) VAL208NG The only air conditioned

References

[edit]
[edit]