I am trying to replace the burned out fuse in my multimeter. It is very small with dimensions of 3.6mm X 10.25mm and has a rating of 600mA @ 250V. I can't seem to find this fuse. I can find one with the same dimensions but it has a 1A rating and much larger ones with the same ratings. Is there any reason why I shouldn't use a larger(physically) fuse in my multimeter? I'd have to make some modifications to the multimeter to accept it of course...(I'd only ever be using this multimeter for low power applications).
\$\begingroup\$
\$\endgroup\$
8
-
3\$\begingroup\$ You've already blown one fuse which indicates that you are error prone and need protection. Putting a higher rated fuse in is a bad idea. Putting a physically larger fuse in will compromise safety clearance. I'd recommend getting the right fuse. \$\endgroup\$– TransistorCommented Feb 5, 2018 at 18:52
-
1\$\begingroup\$ The fuse is there to prevent fire. Replace it only with equivalent or faster fuses. \$\endgroup\$– Jeroen3Commented Feb 5, 2018 at 18:52
-
\$\begingroup\$ Do you have an image of the old fuse, or can you provide the markings on it? \$\endgroup\$– SolveEtCoagula07Commented Feb 5, 2018 at 18:52
-
\$\begingroup\$ ive added a couple of images. not sure if they'll be of any help. I would say i am reasonably error prone as any beginner is yes but as i stated i wont be working on high voltage projects. i really just wanted to know whether there was any different in the way the fuse operated because if there isnt then it should work in my multimeter after i modify it. \$\endgroup\$– user2105725Commented Feb 5, 2018 at 19:06
-
\$\begingroup\$ the blob on the end of the fuse indicates that the fuse wire is soldered in .... just break a 600mA glass fuse and use the fuse wire to replace the blown one .... i have done this before and it works .... otherwiese, install an inline fuse holder, if there is room \$\endgroup\$– jsotolaCommented Feb 5, 2018 at 19:09
|
Show 3 more comments