26

I use my bicycle in a typical urban commute setting. No extreme MTB, but it still accumulates some dust and grime.

How should I wash my bicycle?

1
  • @Vorac Why would you dup a question with an accepted answer to a newer question with no accepted answer?
    – paparazzo
    Commented Mar 7, 2016 at 12:11

2 Answers 2

12

Cycling Tips has some useful pointers.

To summarize:

  • Degrease the drivetrain.
  • Wash the degreaser off the drivetrain with the brush and sponge.
  • Wash the rest of the bike with soapy water and the sponge.
  • Rinse the bike off with the clean water and sponge (or a low pressure hose).
  • You can dry the bike by wiping it down with a cloth or let it air dry. It’s a matter of preference.
  • Finish the frame off with Armor-All or give a light wipe with silicon spray to deter the next lot of mud or dust from sticking to the frame too quickly. For obvious reasons don’t wipe on the handlebars, brake hoods, saddle, or wheels.
1
  • 5
    Then relube the chain/drivetrain, and oil other moving parts (3 in 1 oil on various pivot points etc).
    – Amos
    Commented Aug 26, 2010 at 9:21
4

On the urban commute you do not want to be constantly degreasing and lubing the drive chain. Simply keep it lightly oiled so that it is lubricated but not attracting dirt.

If you have normal rim brakes then you will collect that evil dirt on the wheels/rims from braking and this can be hard to shift with soapy water. What you need is washing powder, that stuff you put in the washing machine. Put a small quantity in a bucket of hot water and, with the clean water, give the frame a going over with a soft cloth or sponge.

Get a small screwdriver and clean what you can from in between the sprockets, jockey wheels and chainset. Pedalling backwards whilst holding the screwdriver in place should lift off most of the built-up debris.

Now give the components a quick once over, recommended tool being a brush in the hot washing-powder enhanced water. Use nothing too abrasive, the brush from a dustpan and brush will suffice and can be replaced/disposed affordably.

Now do the wheels. The washing powder should work wonders lifting off the evil black stuff. You can hopefully get in between the spokes and do the sides quickly if you spin the wheels round.

Now you can wash the bike with clean water. Cold is more eco-friendly. Have a look underneath to make sure you have not missed too much. Bounce the bike a few times to get most of the water drops off and then give it a quick dry down with a cloth.

With an oily rag go over the hex bolts and other areas where you need a light coating of protection from rust. Put your favourite lube on the chain and spray minute quantities of 'GT85' on brake pivots, gear mechanisms and catch the excess with a cloth, making extra sure that none of it gets on the rims.

Not the answer you're looking for? Browse other questions tagged or ask your own question.