Questions tagged [creality-ender-3]
For questions about the Creality Ender 3 family of 3D printers
788
questions
2
votes
3
answers
23
views
Printing more heat resistant materials or increasing melting point
I use an Ender-3 3D printer with no additional modifications, due to a specific project I require printing of material that is more heat resistant than the usual PLA by at least 40 - 50 °C. A method ...
0
votes
1
answer
27
views
Why is my printer overextruding at one end of one layer?
My Ender 3 v2 pushes extra filament for about half a second at the end of each layer, which makes it extrude a tiny bit of filament. After more layers, that bump becomes bigger and bigger. I've tried: ...
0
votes
0
answers
22
views
Marlin suddenly ignoring all endstops?
My Ender 3 Pro running the below firmware has suddenly started to ignore all endstops, causing stepper motors to skip and causing damage.
...
1
vote
1
answer
26
views
What would cause my 3D printer to start printing badly from one day to the other?
I started to 3D print a week and a half ago more or less, and I have been doing it with a decent quality, not perfect but decent, while trying to tweak the machine to improve the quality but have ...
1
vote
2
answers
30
views
Why is my Ender 3 nozzle z-axis raising before printing?
I just finished building my Ender 3 printer but the nozzle randomly goes up on the z-axis but won't go back down. Because of this, the filament isn't sticking to the bed and is just being dragged ...
0
votes
1
answer
37
views
Optimal settings for accurate and fast printing?
So, I'm new to the 3D printing scene, I'm a 3D artist by trade. I'm freelancing for a guy who's got a Creality Ender 3 with a nozzle size of 0.8 mm. I need to 3D print a lampshade of 2 mm thick all ...
0
votes
0
answers
6
views
Ender 3 V2 screen overlaying print temps and words
I have tried multiple different things and can't seem to fix it. I am using an 8GB SD card formatted for FAT32 with 4096 allocation. I have tried redoing my firmware on the printer and still get the ...
0
votes
0
answers
41
views
Accidentally bumped the head and it is now offset mid-print; how can I save the print?
I tried to fix a very minor stringing during print and I accidentally bumped the head. As a result, it's now offset and printing spaghetti. I want to save the print but I'm new to this and I'm not ...
0
votes
2
answers
31
views
Device reports readiness to read but returned no data
I'm suddenly unable to connect to my Creality Ender 3 Pro 3D printer (CrealityV4.2.2) via the USB/serial port using Octoprint. Here are some of the logs from Octoprint:
...
0
votes
0
answers
26
views
Custom G-code Routine: Ender 3 Hotend Shutting Off
I'm trying to use some handwritten G-code to cut a shape from a styrofoam sheet, for which I've fused a small copper protrusion to the nozzle of an Ender 3. This seems to work magnificently, save for ...
0
votes
0
answers
28
views
Ender 3 print head doesn't rise when printing
I'm stuck with this one and can't find an answer online, so here it is.
I've had an Ender 3 for coming up to two years now, it's generally been running fine, the occasional head clogging but nothing I ...
0
votes
3
answers
51
views
Why is my Ender 3 v2 Neo bed overheating without any interaction?
I have just purchased my third Ender 3 V2, this time a Neo. After unpacking and assembling it, then switching it on, without any prompt from me the bed starts heating, and carries on heating until it ...
3
votes
2
answers
70
views
Ender 3 Pro Not Using the Whole Bed
My Ender 3-Pro has a printing area of about 24x24 square centimeters. However, when I move the nozzle around either the x or y axes, it only goes up to 21 centimeters. Printing something that requires ...
0
votes
0
answers
15
views
Ender 3 S1 3D printer stops and does not respond when the nozzle heats up to 51 °C
At first I turned on the 3D printer and everything worked fine, but when the nozzle heated up to 51 degrees centigrade, the 3D printer stopped, all I could do was disconnect the printer from the ...
0
votes
1
answer
59
views
Prints finish before they actually are finished
The printer is finishing prints early. The printer notifies the print is finished but, in fact, it is not.
It is probably not a slicer error because I used the same settings for our other Ender 3 ...