Here is my environment:
WAN Cable -> Docsis 3 Zoom 1094 Modem -> TP-Link AC1750 Dual Link Router -> Server to forward
(dynamic public IP) -> Modem: (internal nic: 192.168.100.1
) -> Router: 10.1.1.1
-> Internal Server (10.1.1.10
)
I turned off the firewall to Internal Server for now to make sure everything can get in/out. It is also set to have a static IP
In the 'Router' 10.1.1.1
. management interface I went to Forwarding -> Virtual Servers and added an allow to 10.1.1.10
on port 80 TCP/UDP and enabled it
I change the router management interface to 8080 so there is no port 80 conflict just because.
Docsis 3 Zoom 1094 modem has no configurable options, just an info page at 192.168.100.1
, this is accessible from all PCs on the network.
When I attempt to access my public IP—as listed in the router and on whatsmyip.com—I get a error that no data was received. Internally, when accessing the IP the web server responds.
Strangely, when I enter my public IP on a PC in my internal network it still lands on the internal server page I am trying to access.
I can not figure out what configurations are wrong. UPNP is on, DMZ computer is off, no port triggering rules. More info below
Here is the cable modem info page: (from 192.168.100.1)
Here is some IP and router info:
Here is the LAN info:
WAN info from router:
NAT Settings:
Port forward settings: