0

I recently added a 2GB memory stick to a TravelMate 5740 laptop running Windows 7 32-bit which already had 2GB of RAM. I am aware of 32-bit systems not making use of the full 4GB memory, but I was expecting actual usage between 3GB and 3.5GB. Instead, Windows reports 4GB installed, 2.3GB usable. This is not your average "where is my memory" question, and I don't think it is a duplicate. 2.3GB of usable memory out of 4GB installed is unexpectedly low even for 32-bit systems. Graphics card is an Intel shared-memory one that uses 128MB. Can anyone explain this? Can this problem be "addressed", pun intended?

Improve this question
8
  • it is a duplicate question superuser.com/questions/296164/…
    – Outdated Computer Tech
    Commented Sep 12, 2013 at 19:29
  • 4
    @Sickest it's an exact duplicate even the same laptop
    – Ramhound
    Commented Sep 12, 2013 at 19:49
  • I don't know how a TravelMate 5740 is the same as a TravelMate 8572 . . .
    – ernie
    Commented Sep 12, 2013 at 19:59
  • It's not the same laptop, there wasn't a definite answer, and the link provided regarding that Acer model is dead.
    – Makaveli84
    Commented Sep 12, 2013 at 20:01
  • New link here for the Travelmate 8572. Note 3 + 5 probably also go for the 5740. So the Travelmate only has 3Gb available minus shared memory :(
    – Rik
    Commented Sep 12, 2013 at 20:13

2 Answers 2

Reset to default
1

Here is something you are forgetting to mention:

If you have a graphics card that is not a dedicated Graphics card then it probably uses up memory from your computer.

For instance, I have an HP Pavilion G6 and it has a Radeon HD 6470M graphics card. It is a 1.5 GB graphics card and it is not dedicated.

Because of this, I am only able to use 4.5GB of the 6GB of RAM that I have installed. The graphics card uses the other 1.5BGs. A dedicated graphics card has its own RAM. If you have a dedicated graphics card and you have 6GB of RAM, then you will be able to use all 6BGs.

Improve this answer
0

Unfortunately, on 32bit systems hardware address spaces get mapped into the 4GB address space of your memory hence the reason why you never can really fully use the 4GB installed. Usually, one of the biggest culprits is the graphic's card's memory. Since yours only uses 128MB your available size is quite baffling, but who knows what else is mapped into the address space by your BIOS and to what extent. There are several things you can try though:

Open a command prompt and enter "BCDedit /set PAE forceenable". Then reboot, enter your BIOS and check if it has an option that allows for memory remapping. If so, activate it. Boot into Windows and check your available RAM.

If this doesn't help then the only option would be to upgrade to a 64bit version, or use software that makes use of the unaccessible RAM through other means such as a RAM-Disk.

Edit: I just checked. Your laptop is equipped with a modern Intel I5 which should support 64bit operating systems, so there's really no reason not to upgrade.

Improve this answer
2
  • It's a relative's laptop, backup/upgrade is not an option for now. BIOS doesn't have any memory options. Graphics card using 128MB is exactly what makes this whole thing so baffling (hence not actually a duplicate). I am looking into PAE and the /3GB switch.
    – Makaveli84
    Commented Sep 12, 2013 at 20:04
  • Please read the whole discussion carefully. I mentioned the graphics card - a non dedicated Intel card using only 128 MB - on several occasions (original post, subsequent comments, comments on other responses).
    – Makaveli84
    Commented Nov 13, 2013 at 16:03

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .