If I have a system running at ~500W of power draw, will there be any tangible difference in the outlet wattage draw between a 1200W power supply vs, say, a a 800W power supply? Does the wattage only imply the max available wattage to the system?
4 Answers
UPDATE
I am aware this is not the correct answer, but cannot delete it because it is accepted. The right answer is given by Hennes.
Original post
The wattage of your power supply is what it could potentially supply. However, in practice the supply won't ever make that. I always count 60% of the capacity as the truly maximum capacity. Today however, there are also bronze, silver, gold, platinum power supplies which guarantee a certain amount (minimum of 80%) of efficiency. See this link for a summary of 80 PLUS labels.
Example: If your 1200W supply has a 80 PLUS label on it, it will supply probably 1200W but will consume 1500W. I think you 800W supply will be sufficient, but it won't guarantee you safety.
-
5It will supply at least 1200 Watt, not 960 Watt. If it is 80% efficient and supplying 1200 Watt then it will draw 1500 Watt from the wall socket. If a PSU fails to deliver its stated rating then that is fraud.– HennesCommented Nov 23, 2012 at 7:49
-
@Hennes your right, I was still sleeping I guess :)... Edited my post Commented Nov 23, 2012 at 8:12
-
1@Hennes - "It will supply at least 1200 Watt" - No, a PSU will not supply "at least" its rating. The PSU is capable at most of delivering 1200 watts. The rating is often bogus, since it is a sum (often rounded up) of the rails measured independently, rather than simultaneously. Mixxiphoid - You corrected your arithmetic, but the first paragraph still misconstrues the meaning of 80Plus certification, which is for efficiency, not power levels.– sawdustCommented Nov 23, 2012 at 9:45
-
-
1Efficiency ratings have nothing to do with how much a PSU can supply. The efficiency is the percentage of the input power that is actually usable. So if your build is actually using 1000W at 80% efficiency, then it's pulling 1250W from the wall. Of course you'll only actually get that efficiency if you're at a particular load as Hennes shows. Commented Sep 21, 2015 at 23:47
The wattage implies the maximum available wattage to the system.
However note that the PSU draws AC power from the wall socket, converts it to some other DC voltages, and provides those to your system. There is some loss during this conversion. How much depends on the quality of your PSU and on how much power you draw from it.
Almost any PSU is very inefficient when you draw less then 20% of max rated power from it.
Almost any PSU has less than peak efficiency when you draw close to the max rated power from it.
Almost any PSU has their optimum efficiency around 40% to 60% of maximum load.
Thus if you get a PSU which is 'just large enough' or 'way to big' it is likely to be less efficient.
[But note that your PC does not consume a fixed or constant level of power. At idle, when not much is happening, the DC power consumed will be low. Perform a lot of processing and I/O operations, then power demand goes high.]
Bellow is a nice example of a real world efficiency graph for 900W PSU. The x-axis shows the power supply load in Watts and the y-axis shows efficiency.
will there be any tangible difference in the outlet wattage draw between a 1200W power supply vs, say, a a 800W power supply?
The 800 Watt PSU would run at 62.5% of max rating. That is a good value.
The 1200 Watt PSU would run at only 41% of its maximum rating. That is still within the normally accepted range, but at the low end. If your system is not going to change than the 800 Watt PSU is the better choice.
Note that even with a good (bronze+ or silver rated PSU) you are still loosing about 15% during conversion. 15% of 500 Watt means that your computer would use 500 Watt, but the PSU would draw 588 Watt from the wall socket.
-
3How ironic, you correct Mixxiphoid's arithmetic, but use bad arithmetic in your answer. A 15% inefficiency when delivering 500 Watts of DC power implies that the PSU consumes 588 Watts of AC power from the wall outlet. 588W * (100% - 15%) = 500W– sawdustCommented Nov 23, 2012 at 9:54
For the most informed reading about PSUs go to this site and especially read the article "Firecracker or Power Plant" Very informative even for the lay person.
http://www.tomshardware.com/reviews/power-supply-oem-manufacturer,2913.html
-
1Welcome to Super User! Whilst this may theoretically answer the question, it would be preferable to include the essential parts of the answer here, and provide the link for reference.– Daniel Beck ♦Commented Jan 13, 2013 at 21:17
manufacturers of electrical power supplies often indicate the input power (the power which it consumes) because it is the higher value and can be marketed better. you should check if they also indicate the output power to be on the safe side.
regarding efficiency there is a big difference based on the technology used. the efficiency is calculated as efficiency = output power / input power
.