5

I'm having an issue on our home network that is driving me mad.

More often than not, when a user on our LAN is downloading and using most of the bandwidth my connection my PC or my laptop or my brothers laptop drops.

It's not only when bandwidth is being used but it does seem to happen more often when this is the case.

As this affects more than just my PC I know it can't be PC specific (I hope, anyway).

The router WAS a Draytek Vigor 2820n and I blamed the router for the drops so I asked work for a new router and they were kind enough to buy me the newer model, the Draytek Vigor 2830n. Annoyingly, the problem still exists.

I've tried several things here to get this working and I've listed them below. I'd appreciate any advice that may help me fix the issue.

  • Changed the router from a 2820n to a new 2830n, the problem persists.
  • Reset to factory settings.
  • Manually set an IP address and changed my PC name in case there were any conflicts with my previous wireless card.
  • As above, I tried a USB wireless dongle, a wireless card and am now using an ethernet plug - I still have the issue.
  • Flushed my DNS/cleared ARP cache table on router.
  • Punched monitor.
  • Changed my local DNS to use Google DNS.
  • Upgraded to the latest firmware (on both routers).
  • Screamed.
  • Disabled my wireless and used the ethernet plugs to run on a LAN.
  • Replaced router power cable
  • Changed wireless channel (several times!)

Now my last point is interesting. My brother had the same problems as I was getting but he switched to an ethernet plug and according to him he hasn't experienced any further problems so I thought "Ah, OK. Must be interference" and get myself an ethernet plug. Nope, I still get disconnections.

Also 90% of the time it's when first using the internet that it will drop and then intermittently after that.

I think that covers it, if I think of any more things I've tried I'll add it to the list.

Thanks, Ricky

Edit: By "ethernet plugs" I think I actually mean "ethernet adapters".

Edit 2: By editing the first time, I got disconnected when trying to save the edit. Good timing.

Edit 3: The only thing I can think of is the login/interface on both routers is very similar. Perhaps it uses the same firmware, and that firmware has a bug. The next step might be to trial a totally different make of router? I have now set the router DNS servers to Google DNS, still no luck. Update: Removed this now.

UPDATE: It definitely seems to happen more when a user is downloading on our LAN. If no-one is downloading we can browse fine. As soon as someone starts downloading (even about 10% of the entire bandwidth) it seems prone to disconnecting.

Now, one thing I have thought is my ISP is Sky and I replaced their horrible router with our current Draytek. I did read when I done this you aren't supposed to change the Sky router as Sky can detect this and complain or something along them lines. I wonder if the ISP could be causing this?

Update 2: Today I've had the exact same issues and I can confirm no-one is downloading at this time. 4 IP's are connected. I don't know if this is relevant either but it does also seem to me disconnect shortly after connecting back to the router after a short period of inactivity (e.g laptop to sleep for 30 mins > log in, browse literally a page or two and then bam > disconnected/hanging).

Update 3: I have switched the router back from a Draytek to our original Sky router. From tests yesterday, on my laptop and another laptop (wireless) we did not get disconnected once. My PC upstairs (wired) didn't disconnect either but did hang here and then. It seems there is an improvement but I wouldn't say the issue is fixed until I trial it for a few more days. As ever, I will update!

Update 4: Well, since switching back to the Sky router I've not been disconnected once. It's appearing that for some reason, both different models of the Draytek routers caused me grief, both with different firmware too. I don't know if this is because Sky can some how send 'kill packets' if they detect we aren't using their stock router or it's configured in some way to work with our line correctly, my networking isn't great. Providing I've had no disconnections following the next few days, I will end this question. I'll update in a few more days to see how things have gone.

Update 5: Well, even when switching back to the original router we started getting problems. The problem IS definitely worse when maxing out the download or upload. After several tests and changing equipment etc I've come to the conclusion it's the ISP/exchange at fault. There are no other answers. After reading a few threads, it seems a common problem with Sky Broadband too, see here and this. Thanks for all your help.

Ping results once disconnected (this shows a ping from the router, but I cannot get access to the interface on 192.168.1.1, it just hangs saying "connecting..."):

C:\Users\Ricky\Desktop>ping google.com

Pinging google.com [173.194.67.104] with 32 bytes of data:
Reply from 173.194.67.104: bytes=32 time=461ms TTL=49
Request timed out.
Request timed out.
Reply from 173.194.67.104: bytes=32 time=454ms TTL=49

Ping statistics for 173.194.67.104:
    Packets: Sent = 4, Received = 2, Lost = 2 (50% loss),
Approximate round trip times in milli-seconds:
    Minimum = 454ms, Maximum = 461ms, Average = 457ms

C:\Users\Ricky\Desktop>ping 192.168.1.1

Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time=4ms TTL=255
Reply from 192.168.1.1: bytes=32 time=3ms TTL=255
Reply from 192.168.1.1: bytes=32 time=3ms TTL=255
Reply from 192.168.1.1: bytes=32 time=3ms TTL=255

Ping statistics for 192.168.1.1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 3ms, Maximum = 4ms, Average = 3ms

C:\Users\Ricky\Desktop>ping 8.8.8.8

Pinging 8.8.8.8 with 32 bytes of data:
Reply from 8.8.8.8: bytes=32 time=472ms TTL=54
Reply from 8.8.8.8: bytes=32 time=267ms TTL=54
Reply from 8.8.8.8: bytes=32 time=355ms TTL=54
Reply from 8.8.8.8: bytes=32 time=464ms TTL=54

Ping statistics for 8.8.8.8:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 267ms, Maximum = 472ms, Average = 389ms

C:\Users\Ricky\Desktop>pause
Press any key to continue . . .
13
  • Just a note, you do not need to write out your edit descriptions in the post. SuperUser keeps track of the revisions, which can be viewed by anyone. It is encouraged to add information to the Edit Summary box, however. :)
    – iglvzx
    Commented Dec 14, 2011 at 22:27
  • Fair doos, I shall remember for future questions. :) Commented Dec 14, 2011 at 22:35
  • When it disconnects, can you try pinging the router, and also 8.8.8.8 which will let us know if it is internet access that is failing or the LAN connection.
    – Paul
    Commented Dec 14, 2011 at 22:42
  • When you hard-wired yourself via Ethernet, did you disable the wireless adapter? If you did not, it's possible for connections to be using that interface and therefore still be dropped.
    – Garrett
    Commented Dec 15, 2011 at 5:08
  • 2
    What happens if you bypass the router and just go right into the modem and max out your downstream? Commented Dec 19, 2011 at 15:13

12 Answers 12

1

It might be worth doing a packet capture with wireshark or network monitor. You may see a flood of traffic, or a time out, which leads you to the cause.

1
  • Now downloading Wireshark, I'll see how it goes. Thanks Chris. Commented Dec 19, 2011 at 15:39
1
  1. Try disabling one of the adapters.
  2. If that works then change HP team config from auto to 'Network Fault Tolerance only NFT'
1

I faced the same problem. My wireless continued to disconnect after couple of minutes.

Under DrayTek Wireless General Settings my channel was 6.

I changed to Auto, and the problem was resolved. I believe it was due to frequency intereference from some neighbouring equipments.

thanks.

0

Had a similar issue and found the culprit quite by accident. I was moving some equipment and discovered that my cable between my modem and ISP was damaged. Replaced the cable and all is well. Check your physical cables for problems and (ISP to modem, modem to router, router to PC, etc). Good luck

1
  • I've literally replaced all cables now (that I can), the problem is still happening. :( Thanks for the reply. Commented Dec 17, 2011 at 13:42
0

according to following link your router has QOS compatibility:

http://www.draytek.co.uk/products/vigor2830.html

Have you log in to your router configuration and make sure that QOS is enabled? Have you reset both your modem and router and see if that fixes it.

1
  • Hi Manuel, I have tested/enabled QOS - it didn't appear to make any difference to the disconnections. The router itself has been rebooted/replaced/upgraded etc, still I have problems. :( Commented Dec 18, 2011 at 18:31
0

I think you're just seeing the normal symptoms of an overloaded downlink. You'll notice that your pings have no problem reaching the router, so it doesn't seem to be a LAN issue. The issue is probably whatever is overloading the downlink -- the machine that's causing the traffic that you're having to compete with.

1
  • Hi David, just updated my question. Today no-one has been downloading and I still see the same problems. Although the router pinged in that case, every time I've tried connecting to 192.168.1.1 through the web interface it just hangs for about 30 seconds. Commented Dec 19, 2011 at 15:35
0

I have had problems where my router was incompatible with my broadband network interface and caused intermittent problems like that. Trying a router from a different manufacturer as you are doing is a good way to rule that out.

0

Judging by the number of results of a google search for "draytek router connection drop" it appears this is an issue with these routers both on the wired and wireless interfaces: https://www.google.com/search?q=draytek+router+connection+drop

Can you upgrade these devices to an alternative firmware such as DDWRT or the like?

Hmmmm. These appear to use a proprietary chipset that is not compatible with alternative firmwares.

1
  • Hi, I had looked previously and like you I saw quite a few results however I did try many of their suggestions but I still had issues. I have recently got in touch with Draytek support who said they were unaware of the issue but offered me beta firmware to see if it fixed the issue - it didn't. I'm still hopeful that since changing to a Sky router the problem may be resolved but I've been so busy recently I've not had time to thoroughly test it. Once I do I will update my question. Thanks. Commented Dec 22, 2011 at 9:17
0

Might sound silly but sometimes 'if you haven't already' changing the routers wireless channel can help as you may be getting interference from another router.

1
  • Hi Wezly, I'll update my question. I've changed the wireless channel several times, but forgot to add it to my question (it also happens when wired anyhow). Commented Dec 22, 2011 at 13:57
0

This is likely to be something to do with Sky looking for a valid MAC address of the router. Try changing the MAC address of the WAN link on the Draytek to thecsame as the Sky router.

0

I had the exact same issue. I was connecting to the router using an hidden SSID. It turns out that disabling this option completely solved my problems...

The OS X wireless diagnostic utility pointed out that some devices could encounter connectivity issues with hidden SSID, as the SSID is not broadcasting.

I don't know whether you were using an hidden SSID, but hopefully this will be relevant/helpful for someone else.

-1

I have a Vigor 2830vn- and most of the time it's fine. But some days, I get a lot of problems with dropouts. The syslog shows a series of MAC/IP associations and dis-associations, and session stops.

Other days, it's fine. It does seem that weekends are worse - which makes me wonder if it's caused by a local capacity issue on the DSLAM. But even just logging into the router admin page can be flaky.

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .