1

Recently installed Windows Home Server 2011. For those that don't know, it runs on Windows Server 2008 R2 SP1. Unfortunately, I cannot remote desktop to box by machine name I gave it. I set the computer name to during install to ATLAS. I have confirmed it is called ATLAS on the machine. No idea how, but even after I run ipconfig /flushdns and then run nslookup, I get the following:

nslookup atlas 127.0.0.1

nslookup server 192.168.1.68 (correct IP)

Methods:
IPv6: Works
IPv4: Works
"ATLAS" machine name: No
"Server" machine name: Works

Any ideas how I can fix this or how it keeps setting the machine name to "server" ?

Update: Here are the results of two different ping tests. Notice that when I ping ATLAS, it doesn't have a DNS suffix.

ping atlas Pinging ATLAS [192.168.1.68] with 32 bytes of data:

nslookup server Pinging server.gateway.2wire.net [192.168.1.68] with 32 bytes of data:

Improve this question
1
  • nslookup works via DNS. If the machine has a dynamically allocated IP address you might want to refresh/renew it to let it automatically register itself in DNS (or let the DHCP server do it, if the DHCP server is directed to register all DHCP leases into DNS).
    – ta.speot.is
    Commented Jun 25, 2011 at 3:27

2 Answers 2

Reset to default
1

Are you sure that the firewall settings are configured correctly? Most probably a firewall issue.

Improve this answer
5
  • Which firewall? My laptop or the server? The router? What kind of settings would I be looking for?
    – IrishBoiler
    Commented Jun 25, 2011 at 0:14
  • Have you checked if Network discovery is set to ON on both machines? You can check it at network & sharing center by clicking the network connection icon on the system tray (just in case you don't know). Also check that the network is not set to "public" network as it will also turn off discovery.
    – can poyrazoğlu
    Commented Jun 25, 2011 at 0:19
  • Both are set to Network discovery to ON. I can pull up the network map in Network & Sharing center on my laptop and it correctly calls the machine ATLAS. ATLAS even joined the homegroup
    – IrishBoiler
    Commented Jun 25, 2011 at 0:25
  • Just to be sure, you can RD by IP address, right?
    – can poyrazoğlu
    Commented Jun 25, 2011 at 0:33
  • Correct, using either the IPv4 or v6, I can get there just fine
    – IrishBoiler
    Commented Jun 25, 2011 at 0:36
1

In the end, I gave up and just added it to the hosts file on my laptop. While it works, I was hoping for a more universal solution.

Improve this answer

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .