0

I am having issues connecting via WireGuard on OpenWRT wirelessly.

I have followed ALL instructions on AzireVPN's website except for Firewall Zones settings, which I had to set as follows for it to work (it wouldn't work at all with their settings, not even via Ethernet):

https://i.sstatic.net/EdCk1.png

Now, here's what I have for my wireless settings, maybe you can shed some light so I can get this to work via WiFi:

https://i.sstatic.net/hrSCn.png

Please note under Interface Configuration > Network there is no wg interface to choose from, I am unsure if this has anything to do with the issue:

https://i.sstatic.net/CUubA.png

Another bit of crucial information, my current (physical) network setup is as follows:

  • Main DSL line connected to ISP router/modem
  • OpenWRT router with WireGuard VPN installed connected via WAN to ISP router in ETH0 port.
  • As you can see on one of the screenshots above, OpenWRT router's Mode is Access Point, ISP Modem/Router has DHCP activated.

As highlighted above, the issue is I am unable to get this to work via WiFi, it works via Ethernet when connected to OpenWRT router though.

Many thanks in advance!

Improve this question

1 Answer 1

Reset to default
0

so I've been struggling with this very same issue, I tried several guides and whatnot to do this, probably this is due to the fact that I'm quite an stranger to networking, anyway it turns out I overlooked the fact that curl and ca-bundle need to be installed, after that the connection was routed through wireguard.

Improve this answer

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .