EmbeddedRelated.com

Lost Secrets of the H-Bridge, Part V: Gate Drives for Dummies

Jason Sachs June 22, 20242 comments

Learn the most important issues in power MOSFET and IGBT gate drives: - Transistor behavior during switching - Calculating turn-on and turn-off times - Passive components used between gate drive IC and transistor - Reverse recovery - Capacitively-coupled spurious turn-on - Factors that influence a good choice of turn-on and turn-off times - Gate drive supply voltage management - Bootstrap gate drives - Design issues impacting reliability


Turn It On Again: Modeling Power MOSFET Turn-On Dependence on Source Inductance

Jason Sachs April 29, 2024

This is a short article explaining how to analyze part of the behavior of a power MOSFET during turn-on, and how it is influenced by the parasitic inductance at the source terminal. The brief qualitative reason that source inductance is undesirable is that it uses up voltage when current starts increasing during turn-on (remember, V = L dI/dt), voltage that would otherwise be available to turn the transistor on faster. But I want to show a quantitative approximation to understand the impact of additional source inductance, and I want to compare it to the effects of extra inductance at the gate or drain.


Linear Feedback Shift Registers for the Uninitiated

Jason Sachs April 28, 2024

In 2017 and 2018 I wrote an eighteen-part series of articles about linear feedback shift registers, or LFSRs:

div.jms-article-content ol > li { list-style-type: upper-roman } Ex-Pralite Monks and Finite Fields, in which we describe what an LFSR is as a digital circuit; its cyclic behavior over time; the definition of groups, rings, and fields; the isomorphism between N-bit LFSRs and the field \( GF(2^N) \); and the reason why I wrote this series

Modeling Gate Drive Diodes

Jason Sachs March 11, 20241 comment

This is a short article about how to analyze the diode in some gate drive circuits when figuring out turn-off characteristics --- specifically, determining the relationship between gate drive current and gate voltage during turn-off of a power transistor.


Ten Little Algorithms, Part 7: Continued Fraction Approximation

Jason Sachs December 24, 2023

In this article we explore the use of continued fractions to approximate any particular real number, with practical applications.


Supply Chain Games: What Have We Learned From the Great Semiconductor Shortage of 2021? (Part 5)

Jason Sachs August 28, 2023

In this article we’re going to take a look at cycle time, queues, and inventory. Cycle time is a manufacturing term — for anything, not just semiconductors — meaning how long it takes for an individual product to make its way through a manufacturing process, from start to finish. We’re going to try to understand how long it takes to manufacture semiconductors. In particular, we’re going to try to answer these questions:

  • How long does it take...

Return of the Delta-Sigma Modulators, Part 1: Modulation

Jason Sachs May 28, 2023

About a decade ago, I wrote two articles:

Each of these are about delta-sigma modulation, but they’re short and sweet, and not very in-depth. And the 2013 article was really more about analog-to-digital converters. So we’re going to revisit the subject, this time with a lot more technical depth — in fact, I’ve had to split this...


Supply Chain Games: What Have We Learned From the Great Semiconductor Shortage of 2021? (Part 4)

Jason Sachs December 31, 2022

Today we’re going to look at what’s been going on this past year in the chip shortage, particularly in the automotive markets. I’m going to share some recent events and statements that may shed some light on what’s been happening.

In Part Three we went through a deep dive on some aspects of Moore’s Law, the semiconductor foundries, and semiconductor economics, and we looked at the game Supply Chain Idle. We touched on a couple of important points about the...


Supply Chain Games: What Have We Learned From the Great Semiconductor Shortage of 2021? (Part 3)

Jason Sachs December 10, 2022

Hello again! Today we’re going to take a closer look at Moore’s Law, semiconductor foundries, and semiconductor economics — and a game that explores the effect of changing economics on the supply chain.

We’ll try to answer some of these questions:

  • What does Moore’s Law really mean, and how does it impact the economics of semiconductor manufacturing?
  • How does the foundry business model work, and how is it affected by the different mix of technology...

In Memoriam: Frederick P. Brooks, Jr. and The Mythical Man-Month

Jason Sachs November 20, 2022

It is with some sadness that I have read that Fred Brooks has passed away. Brooks (1931 - 2022) worked at IBM and managed a large team developing the IBM System/360 computers in the early 1960s. Brooks was thirty years old at the start of this project. He founded the Computer Science Department at UNC Chapel Hill in 1964, at the age of thirty-three, acting as its department chair for twenty years. He remained at IBM until 1965, however. During this one-year...


Chebyshev Approximation and How It Can Help You Save Money, Win Friends, and Influence People

Jason Sachs September 30, 201220 comments

Well... maybe that's a stretch. I don't think I can recommend anything to help you win friends. Not my forte.

But I am going to try to convince you why you should know about Chebyshev approximation, which is a technique for figuring out how you can come as close as possible to computing the result of a mathematical function, with a minimal amount of design effort and CPU power. Let's explore two use cases:

  • Amy has a low-power 8-bit microcontroller and needs to compute \( \sqrt{x} \)...

How to Read a Power MOSFET Datasheet

Jason Sachs September 15, 20159 comments

One of my pet peeves is when my fellow engineers misinterpret component datasheets. This happened a few times recently in separate instances, all involving power MOSFETs. So it’s time for me to get on my soapbox. Listen up!

I was going to post an article on how to read component datasheets in general. But MOSFETs are a good place to start, and are a little more specific. I’m not the first person to write something about how to read datasheets; here are some other good...


Understanding and Preventing Overflow (I Had Too Much to Add Last Night)

Jason Sachs December 4, 2013

Happy Thanksgiving! Maybe the memory of eating too much turkey is fresh in your mind. If so, this would be a good time to talk about overflow.

In the world of floating-point arithmetic, overflow is possible but not particularly common. You can get it when numbers become too large; IEEE double-precision floating-point numbers support a range of just under 21024, and if you go beyond that you have problems:

for k in [10, 100, 1000, 1020, 1023, 1023.9, 1023.9999, 1024]: try: ...

Adventures in Signal Processing with Python

Jason Sachs June 23, 201311 comments

Author’s note: This article was originally called Adventures in Signal Processing with Python (MATLAB? We don’t need no stinkin' MATLAB!) — the allusion to The Treasure of the Sierra Madre has been removed, in deference to being a good neighbor to The MathWorks. While I don’t make it a secret of my dislike of many aspects of MATLAB — which I mention later in this article — I do hope they can improve their software and reduce the price. Please note this...


How to Estimate Encoder Velocity Without Making Stupid Mistakes: Part I

Jason Sachs December 27, 201230 comments

Here's a common problem: you have a quadrature encoder to measure the angular position of a motor, and you want to know both the position and the velocity. How do you do it? Some people do it poorly -- this article is how not to be one of them.

Well, first we need to get position. Quadrature encoders are incremental encoders, meaning they can only measure relative changes in position. They produce a pair of pulse trains, commonly called A and B, that look like...


My Love-Hate Relationship with Stack Overflow: Arthur S., Arthur T., and the Soup Nazi

Jason Sachs February 15, 201551 comments

Warning: In the interest of maintaining a coherent stream of consciousness, I’m lowering the setting on my profanity filter for this post. Just wanted to let you know ahead of time.

I’ve been a user of Stack Overflow since December of 2008. And I say “user” both in the software sense, and in the drug-addict sense. I’m Jason S, user #44330, and I’m a programming addict. (Hi, Jason S.) The Gravatar, in case you were wondering, is a screen...


Ten Little Algorithms, Part 2: The Single-Pole Low-Pass Filter

Jason Sachs April 27, 201516 comments

Other articles in this series:

I’m writing this article in a room with a bunch of other people talking, and while sometimes I wish they would just SHUT UP, it would be...


Thermistor signal conditioning: Dos and Don'ts, Tips and Tricks

Jason Sachs June 15, 201118 comments

In an earlier blog entry,  I mentioned this circuit for thermistor signal conditioning:

It is worth a little more explanation on thermistor signal conditioning; it's something that's often done poorly, whereas it's among the easiest applications for signal conditioning.

The basic premise here is that there are two resistors in a voltage divider: Rth is the thermistor, and Rref is a reference resistor. Here Rref is either R3 alone, or R3 || R4, depending on the gain...


Zebras Hate You For No Reason: Why Amdahl's Law is Misleading in a World of Cats (And Maybe in Ours Too)

Jason Sachs February 27, 20171 comment

I’ve been wasting far too much of my free time lately on this stupid addicting game called the Kittens Game. It starts so innocently. You are a kitten in a catnip forest. Gather catnip.

And you click on Gather catnip and off you go. Soon you’re hunting unicorns and building Huts and studying Mathematics and Theology and so on. AND IT’S JUST A TEXT GAME! HTML and Javascript, that’s it, no pictures. It’s an example of an


Important Programming Concepts (Even on Embedded Systems) Part I: Idempotence

Jason Sachs August 26, 20145 comments

There are literally hundreds, if not thousands, of subtle concepts that contribute to high quality software design. Many of them are well-known, and can be found in books or the Internet. I’m going to highlight a few of the ones I think are important and often overlooked.

But first let’s start with a short diversion. I’m going to make a bold statement: unless you’re a novice, there’s at least one thing in computer programming about which you’ve picked up...