3D - Energia
86 Pins
1mo
Collection by
ART Turbine by drewrt
I aim to provide more useful drawings, including documented instructions for building a 10ft tall (about 2 sq meters swept area) version. I will probably only be able to update this once a week or so. While smaller versions can be printed, because of the way air works (Kinematic Viscosity), smaller versions of the turbine do not work as well (however they should work great in water). I'm providing these for scientific purposes. This is my design, and it is my opinion that it is not co
Modular VAWT Verticle axis wind turbine by TheSovereign
This is a modular VAWT that can be made on smaller printers. It can be stacked as high as needed to get the torque required for your energy production. This is a work in progress so things will change however at this point in time it fully functional. the hub should be printed with double thick walls and at least 50 percent infill the rods should be 100% as should the fins and the bottom bearing, top bearing should be 50%+. all of the project is designed to slot into each other part so its pre