Supervisor - Plastic Maintenance

Summary

Job Description

The Plastic Maintenance Supervisor provides leadership and oversight to the Plastic Maintenance Department by monitoring maintenance activities and employees, and by reporting information regularly to other shifts and Management.

ESSENTIAL FUNCTIONS (To perform within this position successfully, the incumbent must be able to perform each essential duty satisfactorily. Other duties may be assigned.)

Create weekend work plans/schedule, including shutdown and holidays

Supervise planning of preventive maintenance schedules, shutdowns, and repairs related to equipment

Monitor and report downtime, Mean Time To Repair (MTTR), Mean Time Between Fail (MTBF), and 3R5S for shift

Report weekly and monthly result and plan for shift

Directly supervise weekend and shutdown work completed by team members

Report work results on weekends and holidays with construction report and hourly summary

Report weekly and monthly attendance analysis for shift

Monitor 3R5S in work areas related to the Maintenance Department’s property and equipment

Evaluate hourly Team Members’ skills and work performance

Report training results and improvement progress

Communicate with each department's vendors and contractors regarding maintenance issues

Report information after shift change meeting regarding any maintenance issues

Ensure OSHA and Mobis standards are adhered to for Personal Protective Equipment

Report daily downtime of all processes, including trouble reports for major downtime

Submit continuous improvement ideas for equipment issues

Create, maintain, and monitor list of needed repairs

Create notification and work orders in SAP for preventive maintenance, corrective actions, and breakdowns

Assist with new equipment installation in cooperation with engineering

Document process data required per ADEM and OEM related equipment

Comply with and promote safety in the workplace

All other duties assigned

Supervisory Responsibilities:

Yes, supervise a team of five (5) or more Hourly Maintenance Technicians

BASIC QUALIFICATIONS (The requirements listed below are representative of the knowledge, skills, and/or ability desired for this position.)

Preferred Education & Experience:

Associates Degree plus three (3) or more years of maintenance supervisor experience

Or, a High School Diploma or GED plus five (5) or more years of maintenance supervisor experience

Working knowledge of refrigeration systems

Knowledge, Skills, & Abilities:

Knowledge of pneumatics, hydraulics, electrical, and mechanical systems

Knowledge of robotics, automation, and injection molding machines

Knowledge of Total Productive Maintenance (TMP) techniques

Knowledge of Microsoft Excel, Word, and PowerPoint

Leadership and supervisory skills

Certificates, Licenses, and Registrations: None

WORKING CONDITIONS:

The incumbent works in both the office and on the production floor and must be able to climb ladders and stairs and must be able to up to 50 lbs. This position works a 12 hour Fixed Day or Night Shift. Schedule cycle consists of 2 days on, 2 days off, 3 days on, 2 days off, 2 days on, 3 days off (every other weekend off)

Company Description

Who is Hyundai MOBIS?

Hyundai MOBIS forms the parts and service arm for South Korean automakers Hyundai Motor Company, Genesis Motors, and Kia Motors. The company offers chassis, cockpit, and front-end modules; safety products, including airbags, headlights, anti-lock brake systems, and electronic stability control products; steering parts; multimedia systems; UVO systems; injection-molded plastic parts, such as instrument panels, carriers, and bumpers; and steel wheel rims and decks. It also supplies after-sales service parts for vehicles. Concentrating its resources on after-sales parts, module parts manufacture, and parts export, Hyundai MOBIS has firmly established its position as one of the leading auto parts specialist companies in the world.

Hyundai MOBIS’s Module Division, of which MOBIS Alabama, LLC is part, has supplied the three major modules, chassis module, cockpit module, and front-end module, to automakers in the just-in-sequence (JIS) system. Participating in the initial stages of a new vehicle development process, Hyundai MOBIS performs research and development of auto-parts, taking into account the specifications for modules, including designing and testing for production applications. Through system integration of modularization, Hyundai MOBIS is contributing to increased competitiveness and in-sequence processing, reducing total weight and the number of parts needed. This allows for easier assembly, effective inventory control, and cost reduction.

Who is MOBIS Alabama?

Established in 2002 and operating on nearly 83 acres in Montgomery, Alabama, MOBIS Alabama, LLC is the largest Tier 1 supplier to both Hyundai Motor Manufacturing Alabama (HMMA) and KIA Motor Manufacturing Georgia (KMMG). With a commitment to quality, we pride ourselves on providing state-of-the-art Modules, Assemblies, and genuine Hyundai and KIA after-service parts. We hold both the ISO14001 and IATF16949 Certifications for Environmental Management and Quality Management.

Our process begins in the sprawling 600,000 square-foot Plastics plant where we use injection molding to produce front and rear bumpers, instrument panel frames, and after-service parts. Our bumpers are molded and painted in-house. Bumpers for HMMA are also assembled in-house before transfer to HMMA for final assembly, while bumpers for KMMG are sent to our sister plant in Georgia for assembly. After molding, instrument panel frames move to the Module plant next door where we prepare them to receive additional parts to form a complete Cockpit (dashboard) assembly. Also in the Module building are our front and rear Chassis (vehicle suspension) assembly lines. Here, parts from Tier 2 and 3 suppliers are assembled into completed Chassis modules which are transported to nearby HMMA for final vehicle assembly.

Our Redistribution Center (RDC) supplies genuine Hyundai and KIA after-service parts to dealerships, auto parts stores, and other parts distribution centers. We receive parts from suppliers globally which are distributed across North America to satisfy our customers’ demand for high-quality automotive parts.

Who is Hyundai MOBIS? Hyundai MOBIS forms the parts and service arm for South Korean automakers Hyundai Motor Company, Genesis Motors, and Kia Motors. The company offers chassis, cockpit, and front-end modules; safety products, including airbags, headlights, anti-lock brake systems, and electronic stability control products; steering parts; multimedia systems; UVO systems; injection-molded plastic parts, such as instrument panels, carriers, and bumpers; and steel wheel rims and decks. It also supplies after-sales service parts for vehicles. Concentrating its resources on after-sales parts, module parts manufacture, and parts export, Hyundai MOBIS has firmly established its position as one of the leading auto parts specialist companies in the world. Hyundai MOBIS’s Module Division, of which MOBIS Alabama, LLC is part, has supplied the three major modules, chassis module, cockpit module, and front-end module, to automakers in the just-in-sequence (JIS) system. Participating in the initial stages of a new vehicle development process, Hyundai MOBIS performs research and development of auto-parts, taking into account the specifications for modules, including designing and testing for production applications. Through system integration of modularization, Hyundai MOBIS is contributing to increased competitiveness and in-sequence processing, reducing total weight and the number of parts needed. This allows for easier assembly, effective inventory control, and cost reduction. Who is MOBIS Alabama? Established in 2002 and operating on nearly 83 acres in Montgomery, Alabama, MOBIS Alabama, LLC is the largest Tier 1 supplier to both Hyundai Motor Manufacturing Alabama (HMMA) and KIA Motor Manufacturing Georgia (KMMG). With a commitment to quality, we pride ourselves on providing state-of-the-art Modules, Assemblies, and genuine Hyundai and KIA after-service parts. We hold both the ISO14001 and IATF16949 Certifications for Environmental Management and Quality Management. Our process begins in the sprawling 600,000 square-foot Plastics plant where we use injection molding to produce front and rear bumpers, instrument panel frames, and after-service parts. Our bumpers are molded and painted in-house. Bumpers for HMMA are also assembled in-house before transfer to HMMA for final assembly, while bumpers for KMMG are sent to our sister plant in Georgia for assembly. After molding, instrument panel frames move to the Module plant next door where we prepare them to receive additional parts to form a complete Cockpit (dashboard) assembly. Also in the Module building are our front and rear Chassis (vehicle suspension) assembly lines. Here, parts from Tier 2 and 3 suppliers are assembled into completed Chassis modules which are transported to nearby HMMA for final vehicle assembly. Our Redistribution Center (RDC) supplies genuine Hyundai and KIA after-service parts to dealerships, auto parts stores, and other parts distribution centers. We receive parts from suppliers globally which are distributed across North America to satisfy our customers’ demand for high-quality automotive parts.