Jump to content

Fujica X-mount

From Wikipedia, the free encyclopedia
(Redirected from Fujica X bayonet)

The Fujica X-mount was a lens mount created by Fujifilm in the late 1970s and early 1980s for the new Fujica SLR lineup: AX-1, AX-3, AX-5, AX Multi, STX-1, STX-1N, STX-2, MPF105X, MPF105XN. It replaced the M42 screw mount used on their earlier SLRs.

The mount is a bayonet type, with a 65° clockwise lock, and a flange focal distance of 43.5 mm.[1]

With the advent of autofocus, the Fujica series of 35 mm SLR cameras was discontinued in 1985, rendering this mount obsolete.[2] Fuji would return to the SLR market in 2000 with a series of digital SLR cameras starting with the FinePix S1 Pro, but these were based on Nikon designs and used the autofocus version of the Nikon F-mount.

Fujifilm introduced a line of twenty-seven X-Fujinon lenses with this mount (as well as three Fujinar lenses):

Fujifilm X-Fujinon lenses

[edit]

The following lists Fujifilm X-Fujinon lenses with this mount (not including Fujinar lenses with this mount).

Not on that list are the following lenses:

The Fujinar lenses are:

The "no-DM" lens cannot be used for program and shutter priority exposure modes of the AX-5 SLR; aperture priority and manual mode will work.

Accessories

[edit]

There were some accessories that complied with Fujica X-mount:

  • The "mount adapter X-S and X-D" for M42 lenses.
  • Two extension tubes : X25 (25 mm) and X50 (50 mm).
  • The "auto bellows X" used with a 50 mm lens can provide 1 to 3× magnification. It can also be used with the "focusing rail X". The Fujica "slide copier X" mounted on the "focusing rail X" simplifies the copying of 135 film pictures.
  • The "macro cine copy X" is a macro lens with specific windows to take copies from 8 mm and 16 mm films.
  • The "microscope adapter X" to adapt the camera body to a microscope.
  • A "reverse adapter X", that can be mounted with an extension tube.
  • A classic "teleconverter 2X".
  • Fuji Photo Recorder back. This data back was interchangeable with the standard camera back and was equipped with a hand-writing pen that is inter-linked with a "light pen" for printing in data (up to 80 characters) in the bottom-left corner of the image. The back can be easily detached by pushing down on the hinge pin.

See also

[edit]

References

[edit]
  1. ^ AX-1 owner's manual
  2. ^ "Fujica X Mount Camera Bodies". Pentax-manuals.com. Retrieved 2016-03-04.
[edit]