All Questions
Tagged with brakes brake-levers
60
questions
1
vote
1
answer
129
views
Front hydraulic brake lever dislodged
This is a brand new mountain bike for kids with hydraulic brakes.
The bike fell on its side and when we picked it up, the brake handle got caught by a branch. With a little effort, we were able to ...
4
votes
3
answers
845
views
Replacing hydraulic brake lever
This is my first time dealing with hydraulic brakes.
The front brake on my bike is Shimano BL-M4100 lever with MT410 caliper. I stripped the lever's clamp thread and going to replace the lever with a ...
2
votes
1
answer
499
views
What tool do I need to adjust the brake cable here?
I need to loosen very tight bicycle brakes(pads). This is the only thing running over the cable, have no idea what it is and don't have many tools to begin with so assuming I don't have what is needed ...
1
vote
1
answer
115
views
Can i replace just the brake on a bike that has a combined shifter/brake lever unit
i’ve just bought a new bike with shifter and brake units together on the handlebars.
i want to replace the brakes with hydraulics from
my last bike (new bike has cable brakes), however i don’t know if ...
-1
votes
1
answer
98
views
Mechanical bike disc brake caliper lever
Where can I find a data sheet for this part? I want to know if there is a magnification factor between the force which acts on the disc brake by pads, and the force that I pull the wire with, as I ...
6
votes
1
answer
3k
views
How to interpret Shimano compatibility chart?
How does one interpret the delineation of horizontally-aligned boxes on the Shimano compatibility charts? Below is a screenshot (with added blue numbering) for discussion purposes.
For example, why ...
3
votes
3
answers
2k
views
Where/how do I reduce travel on my brake levers?
How do I reduce travel my brake lever? (To brake currently, I practically have to depress it all the way to the handle bar.)
I don't see any place to put an allen wrench anywhere. What am I missing?
2
votes
0
answers
284
views
after multiple brake bleed, lever's max stiffness is still close to bar
so after a few bleeds i've done on these Shimano saints, because of new levers replacement, i've found that the rear brake lever, although on max stiffness, goes way further to the bar then the other ...
-1
votes
1
answer
111
views
Performance of 'safety levers' [duplicate]
How do safety levers work exactly?
When installed properly, what is their braking performance? What about when installed improperly?
What faults do they have?
How ergonomic are they? How good of a fit ...
3
votes
2
answers
751
views
Would you be able to use mountain bike/straight bar cable brake levers as auxiliary/inline brake levers on drop bars?
Really dumb question, but would this be possible, with or without practicality? Drill a hole in them, perhaps?
3
votes
1
answer
4k
views
Repair Tektro HD-M275 brake lever
My girlfriend's son recently acquired a pre-owned Scott Aspect 760 for Christmas (2021 model) - essentially brand-new and ridden once or twice, if at all.
We noticed the other day that something ...
1
vote
0
answers
108
views
when bike kept inside, brake/ lever goes extremely stiff
so, I've been through a lot of fiddling with my brake levers, giving them a small clean out and bleed, but I've noticed now that when i keep my bike inside (on heated floor) the brake levers go stiff, ...
2
votes
1
answer
1k
views
Why do my side pull caliper brakes work better with linear pull levers
I have an older Windsor bike that came with some long arm side pull caliper brakes. I was using it with a pair of avid fr-5 brake levers that are stated on the specs as "Compatible - All levers ...
2
votes
2
answers
2k
views
failed brake bleed, lever is blocked up
My brakes are Shimano Saint.
I tried bleeding my brake to identify a problem and no fluid went through. I took the brake lever off separately and pushed water through it, still blocked so I gathered ...
1
vote
1
answer
3k
views
Brake lever suddenly lost its extra movement (extremely stiff). before the pads contact the Disk
a month back i had a crash where the brake lever got a clump of sand on it, so i washed it out with water and didn't have any problems, then one random day when i took my bike out for a ride i noticed ...
2
votes
1
answer
5k
views
My Hydraulic Brakes Always Need To Be Pumped/Burped Before Braking Sharply
So my mechanic and I bled my brakes after it always needing to be pumped before it brakes, brake fluid came out black and seemed to have metal shavings at the bottom. The only problem now is weirdly ...
7
votes
2
answers
559
views
Are clear hydraulic brake lines available for sale?
Since all brake lines are not see through, the only way to determine if your brake needs a bleed is by feeling the brakes. If they are "squishy", then you need a brake bleed.
I'm of the ...
3
votes
1
answer
121
views
Should brake lever move if you press the (V-brake) calipers together?
The "normal" way is pretty clear: you press the brake lever, it pulls the bowden, which then forces the V-brake calipers together.
However, the question is: should it work also the other way ...
2
votes
2
answers
2k
views
Are there downsides to cross-top brake levers? Compatible with all mechanical-hydraulic disc brakes?
I have a Genesis Croix de Fer 20 from a few years ago with the following specs:
Brakes: TRP HY-RD mechanical-hydraulic caliper w/160mm TR160 rotors
Levers: Shimano Tiagra ST-4700
I would like to fit ...
8
votes
1
answer
1k
views
My front brakes contact the rim at different times instead of simultaneously. Is that normal or are they misaligned?
here's the video for reference
When I lightly apply the brakes only one part makes contact with the wheel which makes a squeaking noise.
How can I change this? I'm ...
0
votes
1
answer
155
views
Brake lever compatibility between disc and v brake
I bought a used bike that had no front brake lever or caliper. I am putting this one onCaliper
and am wondering if I can use a lever from a v brake.
7
votes
3
answers
9k
views
Hydraulic brake lever doesn't return after being released, dependent on weather
I have a pair of second-hand Shimano ST-RS685 hydraulic brake levers / shifters. Unbeknownst to me they hadn't been used for a year and had quite a bit of dirt / grit inside, which I've cleaned to a ...
0
votes
1
answer
2k
views
How to adjust brake level movement on hydraulic brake?
My bicycle has Tektro Auriga hydraulic disc brakes. I can adjust how far the level stitches out with a small screw (see here, figure c2).
I was wondering if it is possible to adjust how much the ...
1
vote
1
answer
4k
views
The brake lever of Shimano's BL-MT200 is too long for me, can I modified it to a shorter one?
The brake lever of Shimano's BL-MT200 is too long for me, can I modify it to a shorter one?
2
votes
2
answers
736
views
New disc-brake, rotor, pads; terrible braking performance
I replaced the following:
Front brake: a brand new Magura MT4 (pre-bled) brake with brand new pads installed
Front rotor: replaced it with a brand new Magura HC Storm 203mm rotor
I used the correct ...
1
vote
0
answers
84
views
Differences and effects of brake lever offset
I've seen some flat bar brake levers where the the pivoting plane of the lever blade is offset and not in line with the center of the handlebar's cross section.
What's the purpose for such design? ...
1
vote
3
answers
1k
views
What is the purpose of an insert pin for Magura brake hoses?
I just upgraded my broken Magura HS11 brake lever assembly to a HS33R. The new HS33R was packaged with a sleeve nut and an olive, which I used to connect the brake hose to the brake lever assembly. ...
5
votes
3
answers
3k
views
Switching the position of brake levers for a bike ordered from another country
I purchased a bike from Germany and I noticed the front brake lever is on the left and the back brake level is on the right. I'm from the UK, and all the bikes I've ever ridden have had a setup that's ...
2
votes
2
answers
2k
views
Why are brake levers still bent in form to accomodate more than one finger?
I thought of it for a while now. Our brake levers look like this:
Why aren't they designed more like this?
Is there a purpose for the extra space? Is two-finger braking still essential in hydraulic ...
3
votes
3
answers
349
views
TRP quadiem brakes - lever not in place
Today I got my new YT Tues bike and I've noticed that front brake lever came off the piston and I have no idea how to get it in place if it is even possible? Is it defective or can I fix it? Rear ...