-
Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$
Authors:
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere,
A. Brueggemann
, et al. (645 additional authors not shown)
Abstract:
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be…
▽ More
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σ$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
FuXi-ENS: A machine learning model for medium-range ensemble weather forecasting
Authors:
Xiaohui Zhong,
Lei Chen,
Hao Li,
Jun Liu,
Xu Fan,
Jie Feng,
Kan Dai,
Jing-Jia Luo,
Jie Wu,
Yuan Qi,
Bo Lu
Abstract:
Ensemble forecasting is crucial for improving weather predictions, especially for forecasts of extreme events. Constructing an ensemble prediction system (EPS) based on conventional NWP models is highly computationally expensive. ML models have emerged as valuable tools for deterministic weather forecasts, providing forecasts with significantly reduced computational requirements and even surpassin…
▽ More
Ensemble forecasting is crucial for improving weather predictions, especially for forecasts of extreme events. Constructing an ensemble prediction system (EPS) based on conventional NWP models is highly computationally expensive. ML models have emerged as valuable tools for deterministic weather forecasts, providing forecasts with significantly reduced computational requirements and even surpassing the forecast performance of traditional NWP models. However, challenges arise when applying ML models to ensemble forecasting. Recent ML models, such as GenCast and SEEDS model, rely on the ERA5 EDA or operational NWP ensemble members for forecast generation. Their spatial resolution is also considered too coarse for many applications. To overcome these limitations, we introduce FuXi-ENS, an advanced ML model designed to deliver 6-hourly global ensemble weather forecasts up to 15 days. This model runs at a significantly increased spatial resolution of 0.25\textdegree, incorporating 5 atmospheric variables at 13 pressure levels, along with 13 surface variables. By leveraging the inherent probabilistic nature of Variational AutoEncoder (VAE), FuXi-ENS optimizes a loss function that combines the CRPS and the KL divergence between the predicted and target distribution, facilitating the incorporation of flow-dependent perturbations in both initial conditions and forecast. This innovative approach makes FuXi-ENS an advancement over the traditional ones that use L1 loss combined with the KL loss in standard VAE models for ensemble weather forecasting. Results demonstrate that FuXi-ENS outperforms ensemble forecasts from the ECMWF, a world leading NWP model, in the CRPS of 98.1% of 360 variable and forecast lead time combinations. This achievement underscores the potential of the FuXi-ENS model to enhance ensemble weather forecasts, offering a promising direction for further development in this field.
△ Less
Submitted 5 July, 2024; v1 submitted 9 May, 2024;
originally announced May 2024.
-
Fuxi-DA: A Generalized Deep Learning Data Assimilation Framework for Assimilating Satellite Observations
Authors:
Xiaoze Xu,
Xiuyu Sun,
Wei Han,
Xiaohui Zhong,
Lei Chen,
Hao Li
Abstract:
Data assimilation (DA), as an indispensable component within contemporary Numerical Weather Prediction (NWP) systems, plays a crucial role in generating the analysis that significantly impacts forecast performance. Nevertheless, the development of an efficient DA system poses significant challenges, particularly in establishing intricate relationships between the background data and the vast amoun…
▽ More
Data assimilation (DA), as an indispensable component within contemporary Numerical Weather Prediction (NWP) systems, plays a crucial role in generating the analysis that significantly impacts forecast performance. Nevertheless, the development of an efficient DA system poses significant challenges, particularly in establishing intricate relationships between the background data and the vast amount of multi-source observation data within limited time windows in operational settings. To address these challenges, researchers design complex pre-processing methods for each observation type, leveraging approximate modeling and the power of super-computing clusters to expedite solutions. The emergence of deep learning (DL) models has been a game-changer, offering unified multi-modal modeling, enhanced nonlinear representation capabilities, and superior parallelization. These advantages have spurred efforts to integrate DL models into various domains of weather modeling. Remarkably, DL models have shown promise in matching, even surpassing, the forecast accuracy of leading operational NWP models worldwide. This success motivates the exploration of DL-based DA frameworks tailored for weather forecasting models. In this study, we introduces FuxiDA, a generalized DL-based DA framework for assimilating satellite observations. By assimilating data from Advanced Geosynchronous Radiation Imager (AGRI) aboard Fengyun-4B, FuXi-DA consistently mitigates analysis errors and significantly improves forecast performance. Furthermore, through a series of single-observation experiments, Fuxi-DA has been validated against established atmospheric physics, demonstrating its consistency and reliability.
△ Less
Submitted 12 April, 2024;
originally announced April 2024.
-
I-mode Plasma Confinement Improvement by Real-time Lithium Injection and its Classification on EAST Tokamak
Authors:
X. M. Zhong,
X. L. Zou,
A. D. Liu,
Y. T. Song,
G. Zhuang,
H. Q. Liu,
L. Q. Xu,
E. Z. Li,
B. Zhang,
G. Z. Zuo,
Z. Wang,
C. Zhou,
J. Zhang,
W. X. Shi,
L. T. Gao,
S. F. Wang,
W. Gao,
T. Q. Jia,
Q. Zang,
H. L. Zhao,
M. Wang,
H. D. Xu,
X. J. Wang,
X. Gao,
X. D. Lin
, et al. (3 additional authors not shown)
Abstract:
I-mode is a promising regime for future fusion reactors due to the high energy confinement and the moderate particle confinement. However, the effect of lithium, which has been widely applied for particle recycling and impurity control, on I-mode plasma is still unclear. Recently, experiments of real-time lithium powder injection on I-mode plasma have been carried out in EAST Tokamak. It was found…
▽ More
I-mode is a promising regime for future fusion reactors due to the high energy confinement and the moderate particle confinement. However, the effect of lithium, which has been widely applied for particle recycling and impurity control, on I-mode plasma is still unclear. Recently, experiments of real-time lithium powder injection on I-mode plasma have been carried out in EAST Tokamak. It was found that the confinement performance of the I-mode can be improved by the lithium powder injection, which can strongly reduce electron turbulence (ET) and then trigger ion turbulence (IT). Four different regimes of I-mode have been identified in EAST. The Type I I-mode plasma is characterized by the weakly coherent mode (WCM) and the geodesic-acoustic mode (GAM). The Type II I-mode is featured as the WCM and the edge temperature ring oscillation (ETRO). The Type III I-mode corresponds to the plasma with the co-existence of ETRO, GAM, and WCM. The Type IV I-mode denotes the plasma with only WCM but without ETRO and GAM. It has been observed that WCM and ETRO are increased with lithium powder injection due to the reduction of ion and electron turbulence, and the enhancement of the pedestal electron temperature gradient. EAST experiments demonstrate that lithium powder injection is an effective tool for real-time control and confinement improvement of I-mode plasma.
△ Less
Submitted 10 April, 2024;
originally announced April 2024.
-
Multi-photon super-linear image scanning microscopy using upconversion nanoparticles
Authors:
Yao Wang,
Baolei Liu,
Lei Ding,
Chaohao Chen,
Xuchen Shan,
Dajing Wang,
Menghan Tian,
Jiaqi Song,
Ze Zheng,
Xiaoxue Xu,
Xiaolan Zhong,
Fan Wang
Abstract:
Super-resolution fluorescence microscopy is of great interest in life science studies for visualizing subcellular structures at the nanometer scale. Among various kinds of super-resolution approaches, image scanning microscopy (ISM) offers a doubled resolution enhancement in a simple and straightforward manner, based on the commonly used confocal microscopes. ISM is also suitable to be integrated…
▽ More
Super-resolution fluorescence microscopy is of great interest in life science studies for visualizing subcellular structures at the nanometer scale. Among various kinds of super-resolution approaches, image scanning microscopy (ISM) offers a doubled resolution enhancement in a simple and straightforward manner, based on the commonly used confocal microscopes. ISM is also suitable to be integrated with multi-photon microscopy techniques, such as two-photon excitation and second-harmonic generation imaging, for deep tissue imaging, but it remains the twofold limited resolution enhancement and requires expensive femtosecond lasers. Here, we present and experimentally demonstrate the super-linear ISM (SL-ISM) to push the resolution enhancement beyond the factor of two, with a single low-power, continuous-wave, and near-infrared laser, by harnessing the emission nonlinearity within the multiphoton excitation process of lanthanide-doped upconversion nanoparticles (UCNPs). Based on a modified confocal microscope, we achieve a resolution of about 120 nm, 1/8th of the excitation wavelength. Furthermore, we demonstrate a parallel detection strategy of SL-ISM with the multifocal structured excitation pattern, to speed up the acquisition frame rate. This method suggests a new perspective for super-resolution imaging or sensing, multi-photon imaging, and deep-tissue imaging with simple, low-cost, and straightforward implementations.
△ Less
Submitted 20 March, 2024;
originally announced March 2024.
-
Miniaturized on-chip spectrometer enabled by electrochromic modulation
Authors:
Menghan Tian,
Baolei Liu,
Zelin Lu,
Yao Wang,
Ze Zheng,
Jiaqi Song,
Xiaolan Zhong,
Fan Wang
Abstract:
Miniaturized on-chip spectrometers with small footprints, lightweight, and low cost are in great demand for portable optical sensing, lab-on-chip systems, and so on. Such miniaturized spectrometers are usually based on engineered spectral response units and then reconstruct unknown spectra with algorithms. However, due to the limited footprints of computational on-chip spectrometers, the recovered…
▽ More
Miniaturized on-chip spectrometers with small footprints, lightweight, and low cost are in great demand for portable optical sensing, lab-on-chip systems, and so on. Such miniaturized spectrometers are usually based on engineered spectral response units and then reconstruct unknown spectra with algorithms. However, due to the limited footprints of computational on-chip spectrometers, the recovered spectral resolution is limited by the number of integrated spectral response units/filters. Thus, it is challenging to improve the spectral resolution without increasing the number of used filters. Here we present a computational on-chip spectrometer using electrochromic filters that can be electrochemically modulated to increase the efficient sampling number for higher spectral resolution. These filters are directly integrated on top of the photodetector pixels, and the spectral modulation of the filters results from redox reactions during the dual injection of ions and electrons into the electrochromic material. We experimentally demonstrate that the spectral resolution of the proposed spectrometer can be effectively improved as the number of applied voltages increases. The average difference of the peak wavelengths between the reconstructed and the reference spectra decreases from 14.48 nm to 2.57 nm. We also demonstrate the proposed spectrometer can be worked with only four or two filter units, assisted by electrochromic modulation. This strategy suggests a new way to enhance the performance of miniaturized spectrometers with tunable spectral filters for high resolution, low-cost, and portable spectral sensing, and would also inspire the exploration of other stimulus responses such as photochromic and force-chromic, etc, on computational spectrometers.
△ Less
Submitted 29 February, 2024;
originally announced February 2024.
-
An Artificial Intelligence (AI) workflow for catalyst design and optimization
Authors:
Nung Siong Lai,
Yi Shen Tew,
Xialin Zhong,
Jun Yin,
Jiali Li,
Binhang Yan,
Xiaonan Wang
Abstract:
In the pursuit of novel catalyst development to address pressing environmental concerns and energy demand, conventional design and optimization methods often fall short due to the complexity and vastness of the catalyst parameter space. The advent of Machine Learning (ML) has ushered in a new era in the field of catalyst optimization, offering potential solutions to the shortcomings of traditional…
▽ More
In the pursuit of novel catalyst development to address pressing environmental concerns and energy demand, conventional design and optimization methods often fall short due to the complexity and vastness of the catalyst parameter space. The advent of Machine Learning (ML) has ushered in a new era in the field of catalyst optimization, offering potential solutions to the shortcomings of traditional techniques. However, existing methods fail to effectively harness the wealth of information contained within the burgeoning body of scientific literature on catalyst synthesis. To address this gap, this study proposes an innovative Artificial Intelligence (AI) workflow that integrates Large Language Models (LLMs), Bayesian optimization, and an active learning loop to expedite and enhance catalyst optimization. Our methodology combines advanced language understanding with robust optimization strategies, effectively translating knowledge extracted from diverse literature into actionable parameters for practical experimentation and optimization. In this article, we demonstrate the application of this AI workflow in the optimization of catalyst synthesis for ammonia production. The results underscore the workflow's ability to streamline the catalyst development process, offering a swift, resource-efficient, and high-precision alternative to conventional methods.
△ Less
Submitted 6 February, 2024;
originally announced February 2024.
-
Improving Global Weather and Ocean Wave Forecast with Large Artificial Intelligence Models
Authors:
Fenghua Ling,
Lin Ouyang,
Boufeniza Redouane Larbi,
Jing-Jia Luo,
Tao Han,
Xiaohui Zhong,
Lei Bai
Abstract:
The rapid advancement of artificial intelligence technologies, particularly in recent years, has led to the emergence of several large parameter artificial intelligence weather forecast models. These models represent a significant breakthrough, overcoming the limitations of traditional numerical weather prediction models and indicating the emergence of profound potential tools for atmosphere-ocean…
▽ More
The rapid advancement of artificial intelligence technologies, particularly in recent years, has led to the emergence of several large parameter artificial intelligence weather forecast models. These models represent a significant breakthrough, overcoming the limitations of traditional numerical weather prediction models and indicating the emergence of profound potential tools for atmosphere-ocean forecasts. This study explores the evolution of these advanced artificial intelligence forecast models, and based on the identified commonalities, proposes the "Three Large Rules" to measure their development. We discuss the potential of artificial intelligence in revolutionizing numerical weather prediction, and briefly outlining the underlying reasons for its great potential. While acknowledging the high accuracy, computational efficiency, and ease of deployment of large artificial intelligence forecast models, we also emphasize the irreplaceable values of traditional numerical forecasts and explore the challenges in the future development of large-scale artificial intelligence atmosphere-ocean forecast models. We believe that the optimal future of atmosphere-ocean weather forecast lies in achieving a seamless integration of artificial intelligence and traditional numerical models. Such a synthesis is anticipated to offer a more advanced and reliable approach for improved atmosphere-ocean forecasts. Additionally, we illustrate how forecasters can adapt and leverage the advanced artificial intelligence model through an example by building a large artificial intelligence model for global ocean wave forecast.
△ Less
Submitted 18 April, 2024; v1 submitted 29 January, 2024;
originally announced January 2024.
-
FuXi-S2S: A machine learning model that outperforms conventional global subseasonal forecast models
Authors:
Lei Chen,
Xiaohui Zhong,
Hao Li,
Jie Wu,
Bo Lu,
Deliang Chen,
Shangping Xie,
Qingchen Chao,
Chensen Lin,
Zixin Hu,
Yuan Qi
Abstract:
Skillful subseasonal forecasts are crucial for various sectors of society but pose a grand scientific challenge. Recently, machine learning based weather forecasting models outperform the most successful numerical weather predictions generated by the European Centre for Medium-Range Weather Forecasts (ECMWF), but have not yet surpassed conventional models at subseasonal timescales. This paper intr…
▽ More
Skillful subseasonal forecasts are crucial for various sectors of society but pose a grand scientific challenge. Recently, machine learning based weather forecasting models outperform the most successful numerical weather predictions generated by the European Centre for Medium-Range Weather Forecasts (ECMWF), but have not yet surpassed conventional models at subseasonal timescales. This paper introduces FuXi Subseasonal-to-Seasonal (FuXi-S2S), a machine learning model that provides global daily mean forecasts up to 42 days, encompassing five upper-air atmospheric variables at 13 pressure levels and 11 surface variables. FuXi-S2S, trained on 72 years of daily statistics from ECMWF ERA5 reanalysis data, outperforms the ECMWF's state-of-the-art Subseasonal-to-Seasonal model in ensemble mean and ensemble forecasts for total precipitation and outgoing longwave radiation, notably enhancing global precipitation forecast. The improved performance of FuXi-S2S can be primarily attributed to its superior capability to capture forecast uncertainty and accurately predict the Madden-Julian Oscillation (MJO), extending the skillful MJO prediction from 30 days to 36 days. Moreover, FuXi-S2S not only captures realistic teleconnections associated with the MJO, but also emerges as a valuable tool for discovering precursor signals, offering researchers insights and potentially establishing a new paradigm in Earth system science research.
△ Less
Submitted 5 July, 2024; v1 submitted 15 December, 2023;
originally announced December 2023.
-
Machine Learning Parameterization of the Multi-scale Kain-Fritsch (MSKF) Convection Scheme
Authors:
Xiaohui Zhong,
Xing Yu,
Hao Li
Abstract:
Warm-sector heavy rainfall often occurs along the coast of South China, and it is usually localized and long-lasting, making it challenging to predict. High-resolution numerical weather prediction (NWP) models are increasingly used to better resolve topographic features and forecast such high-impact weather events. However, when the grid spacing becomes comparable to the length scales of convectio…
▽ More
Warm-sector heavy rainfall often occurs along the coast of South China, and it is usually localized and long-lasting, making it challenging to predict. High-resolution numerical weather prediction (NWP) models are increasingly used to better resolve topographic features and forecast such high-impact weather events. However, when the grid spacing becomes comparable to the length scales of convection, known as the gray zone, the turbulent eddies in the atmospheric boundary layer are only partially resolved and parameterized to some extent. Whether using a convection parameterization (CP) scheme in the gray zone remains controversial. Scale-aware CP schemes are developed to enhance the representation of convective transport within the gray zone. The multi-scale Kain-Fritsch (MSKF) scheme includes modifications that allow for its effective implementation at a grid resolution as high as 2 km. In recent years, there has been an increasing application of machine learning (ML) models to various domains of atmospheric sciences, including the replacement of physical parameterizations with ML models. This work proposes a multi-output bidirectional long short-term memory (Bi-LSTM) model as a replace the scale-aware MSKF CP scheme. The Weather Research and Forecast (WRF) model is used to generate training and testing data over South China at a horizontal resolution of 5 km. Furthermore, the WRF model is coupled with the ML based CP scheme and compared with WRF simulations with original MSKF scheme. The results demonstrate that the Bi-LSTM model can achieve high accuracy, indicating the potential use of ML models to substitute the MSKF scheme in the gray zone.
△ Less
Submitted 6 November, 2023;
originally announced November 2023.
-
FuXi-Extreme: Improving extreme rainfall and wind forecasts with diffusion model
Authors:
Xiaohui Zhong,
Lei Chen,
Jun Liu,
Chensen Lin,
Yuan Qi,
Hao Li
Abstract:
Significant advancements in the development of machine learning (ML) models for weather forecasting have produced remarkable results. State-of-the-art ML-based weather forecast models, such as FuXi, have demonstrated superior statistical forecast performance in comparison to the high-resolution forecasts (HRES) of the European Centre for Medium-Range Weather Forecasts (ECMWF). However, ML models f…
▽ More
Significant advancements in the development of machine learning (ML) models for weather forecasting have produced remarkable results. State-of-the-art ML-based weather forecast models, such as FuXi, have demonstrated superior statistical forecast performance in comparison to the high-resolution forecasts (HRES) of the European Centre for Medium-Range Weather Forecasts (ECMWF). However, ML models face a common challenge: as forecast lead times increase, they tend to generate increasingly smooth predictions, leading to an underestimation of the intensity of extreme weather events. To address this challenge, we developed the FuXi-Extreme model, which employs a denoising diffusion probabilistic model (DDPM) to restore finer-scale details in the surface forecast data generated by the FuXi model in 5-day forecasts. An evaluation of extreme total precipitation ($\textrm{TP}$), 10-meter wind speed ($\textrm{WS10}$), and 2-meter temperature ($\textrm{T2M}$) illustrates the superior performance of FuXi-Extreme over both FuXi and HRES. Moreover, when evaluating tropical cyclone (TC) forecasts based on International Best Track Archive for Climate Stewardship (IBTrACS) dataset, both FuXi and FuXi-Extreme shows superior performance in TC track forecasts compared to HRES, but they show inferior performance in TC intensity forecasts in comparison to HRES.
△ Less
Submitted 24 October, 2023;
originally announced October 2023.
-
Enhancement of cell membrane poration by the antimicrobial peptide Melp5
Authors:
Qixuan Li,
Xiaoshuang Zhong,
Liang Sun,
Liang Dai
Abstract:
Melittin, a natural antimicrobial peptide comprising 26 amino acid residues, can kill bacteria by inducing pores in cell membranes. Clinical applications of melittin as an antibiotic require a thorough understanding of its poration mechanism and mutations that enhance its antimicrobial activity. Previous experiments showed Melp5, a variant of melittin with five mutations, exhibits a higher poratio…
▽ More
Melittin, a natural antimicrobial peptide comprising 26 amino acid residues, can kill bacteria by inducing pores in cell membranes. Clinical applications of melittin as an antibiotic require a thorough understanding of its poration mechanism and mutations that enhance its antimicrobial activity. Previous experiments showed Melp5, a variant of melittin with five mutations, exhibits a higher poration ability. However, the mechanism of the enhanced poration ability is not fully understood. Here, we investigated the mechanism by comparing the poration of melittin and Melp5 using coarse-grained (CG) and all-atom (AA) molecular dynamics (MD) simulations. We observe that Melp5 is likely to form a pore with 5 peptides (pentameric), while melittin is likely to form a pore with 4 peptides (tetrameric). Our atomistic MD simulations show that the pentameric pore of Melp5 has a higher water permeability than the tetrameric pore of melittin. We also analyze the stability of the pores of melittin and Melp5 by calculating the interaction energies of the pores. In particular, we investigate the effects of mutant residues on pore stability by calculating electrostatic and LJ interactions. These results should provide insights on the enhanced poration ability of Melp5 and push it toward applications.
△ Less
Submitted 6 January, 2024; v1 submitted 17 October, 2023;
originally announced October 2023.
-
Temporal compressive edge imaging enabled by a lensless diffuser camera
Authors:
Ze Zheng,
Baolei Liu,
Jiaqi Song,
Lei Ding,
Xiaolan Zhong,
David Mcgloin,
Fan Wang
Abstract:
Lensless imagers based on diffusers or encoding masks enable high-dimensional imaging from a single shot measurement and have been applied in various applications. However, to further extract image information such as edge detection, conventional post-processing filtering operations are needed after the reconstruction of the original object images in the diffuser imaging systems. Here, we present…
▽ More
Lensless imagers based on diffusers or encoding masks enable high-dimensional imaging from a single shot measurement and have been applied in various applications. However, to further extract image information such as edge detection, conventional post-processing filtering operations are needed after the reconstruction of the original object images in the diffuser imaging systems. Here, we present the concept of a temporal compressive edge detection method based on a lensless diffuser camera, which can directly recover a time sequence of edge images of a moving object from a single-shot measurement, without further post-processing steps. Our approach provides higher image quality during edge detection, compared with the conventional post-processing method. We demonstrate the effectiveness of this approach by both numerical simulation and experiments. The proof-of-concept approach can be further developed with other image post-process operations or versatile computer vision assignments toward task-oriented intelligent lensless imaging systems.
△ Less
Submitted 13 September, 2023;
originally announced September 2023.
-
Quantitative and dark field ghost imaging with ultraviolet light
Authors:
Jiaqi Song,
Baolei Liu,
Yao Wang,
Chaohao Chen,
Xuchen Shan,
Xiaolan Zhong,
Ling-An Wu,
Fan Wang
Abstract:
Ultraviolet (UV) imaging enables a diverse array of applications, such as material composition analysis, biological fluorescence imaging, and detecting defects in semiconductor manufacturing. However, scientific-grade UV cameras with high quantum efficiency are expensive and include a complex thermoelectric cooling system. Here, we demonstrate a UV computational ghost imaging (UV-CGI) method to pr…
▽ More
Ultraviolet (UV) imaging enables a diverse array of applications, such as material composition analysis, biological fluorescence imaging, and detecting defects in semiconductor manufacturing. However, scientific-grade UV cameras with high quantum efficiency are expensive and include a complex thermoelectric cooling system. Here, we demonstrate a UV computational ghost imaging (UV-CGI) method to provide a cost-effective UV imaging and detection strategy. By applying spatial-temporal illumination patterns and using a 325 nm laser source, a single-pixel detector is enough to reconstruct the images of objects. To demonstrate its capability for quantitative detection, we use UV-CGI to distinguish four UV-sensitive sunscreen areas with different densities on a sample. Furthermore, we demonstrate dark field UV-CGI in both transmission and reflection schemes. By only collecting the scattered light from objects, we can detect the edges of pure phase objects and small scratches on a compact disc. Our results showcase a feasible low-cost solution for non-destructive UV imaging and detection. By combining it with other imaging techniques, such as hyperspectral imaging or time-resolved imaging, a compact and versatile UV computational imaging platform may be realized for future applications.
△ Less
Submitted 2 August, 2023;
originally announced August 2023.
-
Nano-Subsidence Assisted Precise Integration of Patterned Two-Dimensional Materials for High-Performance Photodetector Arrays
Authors:
Song-Lin Li,
Lei Zhang,
Xiaolan Zhong,
Marco Gobbi,
Simone Bertolazzi,
Wei Guo,
Bin Wu,
Yunqi Liu,
Emanuele Orgiu,
Paolo Samorì
Abstract:
The spatially precise integration of arrays of micro-patterned two-dimensional (2D) crystals onto three-dimensionally structured Si/SiO$_2$ substrates represents an attractive strategy towards the low-cost system-on-chip integration of extended functions in silicon microelectronics. However, the reliable integration of the arrays of 2D materials on non-flat surfaces has thus far proved extremely c…
▽ More
The spatially precise integration of arrays of micro-patterned two-dimensional (2D) crystals onto three-dimensionally structured Si/SiO$_2$ substrates represents an attractive strategy towards the low-cost system-on-chip integration of extended functions in silicon microelectronics. However, the reliable integration of the arrays of 2D materials on non-flat surfaces has thus far proved extremely challenging due to their poor adhesion to underlying substrates as ruled by weak van der Waals interactions. Here we report on a novel fabrication method based on nano-subsidence which enables the precise and reliable integration of the micro-patterned 2D materials/silicon photodiode arrays exhibiting high uniformity. Our devices display peak sensitivity as high as 0.35 A/W and external quantum efficiency (EQE) of ca. 90%, outperforming most commercial photodiodes. The nano-subsidence technique opens a viable path to on-chip integrate 2D crystals onto silicon for beyond-silicon microelectronics.
△ Less
Submitted 24 June, 2023;
originally announced June 2023.
-
FuXi: A cascade machine learning forecasting system for 15-day global weather forecast
Authors:
Lei Chen,
Xiaohui Zhong,
Feng Zhang,
Yuan Cheng,
Yinghui Xu,
Yuan Qi,
Hao Li
Abstract:
Over the past few years, due to the rapid development of machine learning (ML) models for weather forecasting, state-of-the-art ML models have shown superior performance compared to the European Centre for Medium-Range Weather Forecasts (ECMWF)'s high-resolution forecast (HRES) in 10-day forecasts at a spatial resolution of 0.25 degree. However, the challenge remains to perform comparably to the E…
▽ More
Over the past few years, due to the rapid development of machine learning (ML) models for weather forecasting, state-of-the-art ML models have shown superior performance compared to the European Centre for Medium-Range Weather Forecasts (ECMWF)'s high-resolution forecast (HRES) in 10-day forecasts at a spatial resolution of 0.25 degree. However, the challenge remains to perform comparably to the ECMWF ensemble mean (EM) in 15-day forecasts. Previous studies have demonstrated the importance of mitigating the accumulation of forecast errors for effective long-term forecasts. Despite numerous efforts to reduce accumulation errors, including autoregressive multi-time step loss, using a single model is found to be insufficient to achieve optimal performance in both short and long lead times. Therefore, we present FuXi, a cascaded ML weather forecasting system that provides 15-day global forecasts with a temporal resolution of 6 hours and a spatial resolution of 0.25 degree. FuXi is developed using 39 years of the ECMWF ERA5 reanalysis dataset. The performance evaluation, based on latitude-weighted root mean square error (RMSE) and anomaly correlation coefficient (ACC), demonstrates that FuXi has comparable forecast performance to ECMWF EM in 15-day forecasts, making FuXi the first ML-based weather forecasting system to accomplish this achievement.
△ Less
Submitted 20 October, 2023; v1 submitted 22 June, 2023;
originally announced June 2023.
-
PDS-MAR: a fine-grained Projection-Domain Segmentation-based Metal Artifact Reduction method for intraoperative CBCT images with guidewires
Authors:
Tianling Lyu,
Zhan Wu,
Gege Ma,
Chen Jiang,
Xinyun Zhong,
Yan Xi,
Yang Chen,
Wentao Zhu
Abstract:
Since the invention of modern CT systems, metal artifacts have been a persistent problem. Due to increased scattering, amplified noise, and insufficient data collection, it is more difficult to suppress metal artifacts in cone-beam CT, limiting its use in human- and robot-assisted spine surgeries where metallic guidewires and screws are commonly used. In this paper, we demonstrate that conventiona…
▽ More
Since the invention of modern CT systems, metal artifacts have been a persistent problem. Due to increased scattering, amplified noise, and insufficient data collection, it is more difficult to suppress metal artifacts in cone-beam CT, limiting its use in human- and robot-assisted spine surgeries where metallic guidewires and screws are commonly used. In this paper, we demonstrate that conventional image-domain segmentation-based MAR methods are unable to eliminate metal artifacts for intraoperative CBCT images with guidewires. To solve this problem, we present a fine-grained projection-domain segmentation-based MAR method termed PDS-MAR, in which metal traces are augmented and segmented in the projection domain before being inpainted using triangular interpolation. In addition, a metal reconstruction phase is proposed to restore metal areas in the image domain. The digital phantom study and real CBCT data study demonstrate that the proposed algorithm achieves significantly better artifact suppression than other comparing methods and has the potential to advance the use of intraoperative CBCT imaging in clinical spine surgeries.
△ Less
Submitted 20 June, 2023;
originally announced June 2023.
-
Characteristics of the edge temperature ring oscillation during stationary improved confnement mode in EAST
Authors:
A. D. Liu,
X. L. Zou,
X. M. Zhong,
Y. T. Song,
M. K. Han,
Y. M. Duan,
H. Q. Liu,
T. B. Wang,
E. Z. Li,
L. Zhang,
X. Feng,
G. Zhuang,
EAST I-mode working group
Abstract:
I-mode is a natural ELMy-free regime with H-mode like improved energy confnement and L-mode like particle confnement, making it an attractive scenario for future tokamak based fusion reactors. A kind of low frequency oscillation was widely found and appeared to be unique in I-mode, with the frequency between stationary zonal flow and geodesic-acoustic mode (GAM) zonal flow. In EAST, 90 percent I-m…
▽ More
I-mode is a natural ELMy-free regime with H-mode like improved energy confnement and L-mode like particle confnement, making it an attractive scenario for future tokamak based fusion reactors. A kind of low frequency oscillation was widely found and appeared to be unique in I-mode, with the frequency between stationary zonal flow and geodesic-acoustic mode (GAM) zonal flow. In EAST, 90 percent I-mode shots have such mode, called edge temperature ring oscillation (ETRO). The mode probably plays an important role during I-mode development and sustainment, while investigations are needed to clarify the differences between ETRO and the similar mode named as low frequency edge oscillation (LFEO) in AUG and C-Mod, especially whether it is still GAM. In the paper, the ETRO characteristics in EAST were investigated in detail and most do not agree with GAM, including that 1) during L-I transition with edge Te and Ti both increasing, ETRO has a smaller frequency than GAM; 2) ETRO has distinct harmonics in various diagnostics; 3) The magnetic component of ETRO is dominated by m = 1 structure; 4) ETRO is accompanied by turbulence transition between electron-scale and ion-scale; 5) As I-mode approaching to H-mode, ETRO frequency would decrease rapidly with Te increasing. These features imply that ETRO is probably caused by the stationary zonal flow with fnite frequency. Moreover, other damping mechanisms need to be involved besides collision in the Imode edge region. It was found that modest fueling could decrease the ETRO intensity with the I-mode confnement sustaining, suggesting that supersonic molecular beam injection (SMBI) could be used as an effective tool to control ETRO.
△ Less
Submitted 14 June, 2023;
originally announced June 2023.
-
STCF Conceptual Design Report: Volume 1 -- Physics & Detector
Authors:
M. Achasov,
X. C. Ai,
R. Aliberti,
L. P. An,
Q. An,
X. Z. Bai,
Y. Bai,
O. Bakina,
A. Barnyakov,
V. Blinov,
V. Bobrovnikov,
D. Bodrov,
A. Bogomyagkov,
A. Bondar,
I. Boyko,
Z. H. Bu,
F. M. Cai,
H. Cai,
J. J. Cao,
Q. H. Cao,
Z. Cao,
Q. Chang,
K. T. Chao,
D. Y. Chen,
H. Chen
, et al. (413 additional authors not shown)
Abstract:
The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII,…
▽ More
The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII, providing a unique platform for exploring the asymmetry of matter-antimatter (charge-parity violation), in-depth studies of the internal structure of hadrons and the nature of non-perturbative strong interactions, as well as searching for exotic hadrons and physics beyond the Standard Model. The STCF project in China is under development with an extensive R\&D program. This document presents the physics opportunities at the STCF, describes conceptual designs of the STCF detector system, and discusses future plans for detector R\&D and physics case studies.
△ Less
Submitted 5 October, 2023; v1 submitted 28 March, 2023;
originally announced March 2023.
-
Deep Learning (DL)-based Automatic Segmentation of the Internal Pudendal Artery (IPA) for Reduction of Erectile Dysfunction in Definitive Radiotherapy of Localized Prostate Cancer
Authors:
Anjali Balagopal,
Michael Dohopolski,
Young Suk Kwon,
Steven Montalvo,
Howard Morgan,
Ti Bai,
Dan Nguyen,
Xiao Liang,
Xinran Zhong,
Mu-Han Lin,
Neil Desai,
Steve Jiang
Abstract:
Background and purpose: Radiation-induced erectile dysfunction (RiED) is commonly seen in prostate cancer patients. Clinical trials have been developed in multiple institutions to investigate whether dose-sparing to the internal-pudendal-arteries (IPA) will improve retention of sexual potency. The IPA is usually not considered a conventional organ-at-risk (OAR) due to segmentation difficulty. In t…
▽ More
Background and purpose: Radiation-induced erectile dysfunction (RiED) is commonly seen in prostate cancer patients. Clinical trials have been developed in multiple institutions to investigate whether dose-sparing to the internal-pudendal-arteries (IPA) will improve retention of sexual potency. The IPA is usually not considered a conventional organ-at-risk (OAR) due to segmentation difficulty. In this work, we propose a deep learning (DL)-based auto-segmentation model for the IPA that utilizes CT and MRI or CT alone as the input image modality to accommodate variation in clinical practice. Materials and methods: 86 patients with CT and MRI images and noisy IPA labels were recruited in this study. We split the data into 42/14/30 for model training, testing, and a clinical observer study, respectively. There were three major innovations in this model: 1) we designed an architecture with squeeze-and-excite blocks and modality attention for effective feature extraction and production of accurate segmentation, 2) a novel loss function was used for training the model effectively with noisy labels, and 3) modality dropout strategy was used for making the model capable of segmentation in the absence of MRI. Results: The DSC, ASD, and HD95 values for the test dataset were 62.2%, 2.54mm, and 7mm, respectively. AI segmented contours were dosimetrically equivalent to the expert physician's contours. The observer study showed that expert physicians' scored AI contours (mean=3.7) higher than inexperienced physicians' contours (mean=3.1). When inexperienced physicians started with AI contours, the score improved to 3.7. Conclusion: The proposed model achieved good quality IPA contours to improve uniformity of segmentation and to facilitate introduction of standardized IPA segmentation into clinical trials and practice.
△ Less
Submitted 2 February, 2023;
originally announced February 2023.
-
Epitaxial growth of high quality $Mn_3Sn$ thin films by pulsed laser deposition
Authors:
Dong Gao,
Zheng Peng,
Ningbin Zhang,
Yunfei Xie,
Yucong Yang,
Weihao Yang,
Shuang Xia,
Wei Yan,
Longjiang Deng,
Tao Liu,
Jun Qin,
Xiaoyan Zhong,
Lei Bi
Abstract:
Non-collinear antiferromagnet Weyl semimetal $Mn_3Sn$ have attracted great research interest recently. Although large anomalous Hall effect, anomalous Nernst effect and magneto-optical effect have been observed in $Mn_3Sn$, most studies are based on single crystals. So far, it is still challenging to grow high quality epitaxial $Mn_3Sn$ thin films with transport and optical properties comparable t…
▽ More
Non-collinear antiferromagnet Weyl semimetal $Mn_3Sn$ have attracted great research interest recently. Although large anomalous Hall effect, anomalous Nernst effect and magneto-optical effect have been observed in $Mn_3Sn$, most studies are based on single crystals. So far, it is still challenging to grow high quality epitaxial $Mn_3Sn$ thin films with transport and optical properties comparable to their single crystal counterparts. Here, we report the structure, magneto-optical and transport properties of epitaxial $Mn_3Sn$ thin films fabricated by pulsed laser deposition (PLD). Highly oriented $Mn_{3+x}Sn_{1-x}$ (0001) and (11$\bar2$0) epitaxial films are successfully growth on single crystalline $Al_2O_3$ and MgO substrates. Large anomalous Hall effect (AHE) up to $\left| ΔR_H\right|$=3.02 $μΩ\cdot cm$, and longitudinal magneto-optical Kerr effect (LMOKE) with $θ_K$ = 38.1 mdeg at 633 nm wavelength are measured at 300 K temperature, which are comparable to $Mn_3Sn$ single crystals. Our work demonstrates that high quality $Mn_3Sn$ epitaxial thin films can be fabricated by PLD, paving the way for future device applications.
△ Less
Submitted 8 August, 2022;
originally announced August 2022.
-
Actively tuning anisotropic light-matter interaction in biaxial hyperbolic material $α$-MoO$_3$ using phase change material VO$_2$ and graphene
Authors:
Kun Zhou,
Yang Hu,
Xiaoxing Zhong,
Xiaohu Wu
Abstract:
Anisotropic hyperbolic phonon polaritons (PhPs) in natural biaxial hyperbolic material MoO$_3$ has opened up new avenues for mid-infrared nanophotonics, while active tunability of $α$-MoO$_3$ PhPs is still an urgent problem needing to be solved.In this study, we present a theoretical demonstration of actively tuning $α$-MoO$_3$ PhPs using phase change material VO$_2$ and graphene. It is observed t…
▽ More
Anisotropic hyperbolic phonon polaritons (PhPs) in natural biaxial hyperbolic material MoO$_3$ has opened up new avenues for mid-infrared nanophotonics, while active tunability of $α$-MoO$_3$ PhPs is still an urgent problem needing to be solved.In this study, we present a theoretical demonstration of actively tuning $α$-MoO$_3$ PhPs using phase change material VO$_2$ and graphene. It is observed that $α$-MoO$_3$ PhPs are greatly depending on the propagation plane angle of PhPs. The metal-to-insulator phase transition of VO$_2$ has a significant effect on the hybridization PhPs of the $α$-MoO$_3$/VO$_2$ structure and allows to obtain an actively tunable $α$-MoO$_3$ PhPs, which is especially obvious when the propagation plane angle of PhPs is 90.
△ Less
Submitted 9 June, 2022;
originally announced June 2022.
-
Exploiting dynamic nonlinearity in upconversion nanoparticles for super-resolution imaging
Authors:
Chaohao Chen,
Lei Ding,
Baolei Liu,
Ziqin Du,
Yongtao Liu,
Xiangjun Di,
Xuchen Shan,
Chenxiao Lin,
Min Zhang,
Xiaoxue Xu,
Xiaolan Zhong,
Jianfeng Wang,
Lingqian Chang,
Ben J. Halkon,
Xin Chen,
Faliang Cheng,
Fan Wang
Abstract:
Single-beam super-resolution microscopy, also known as superlinear microscopy, exploits the nonlinear response of fluorescent probes in confocal microscopy. The technique requires no complex purpose-built system, light field modulation, or beam shaping. Here, we present a strategy to enhance spatial resolution of superlinear microscopy by modulating excitation intensity during image acquisition. T…
▽ More
Single-beam super-resolution microscopy, also known as superlinear microscopy, exploits the nonlinear response of fluorescent probes in confocal microscopy. The technique requires no complex purpose-built system, light field modulation, or beam shaping. Here, we present a strategy to enhance spatial resolution of superlinear microscopy by modulating excitation intensity during image acquisition. This modulation induces dynamic optical nonlinearity in upconversion nanoparticles (UCNPs), resulting in variations of higher spatial-frequency information in the obtained images. The high-order information can be extracted with a proposed weighted finite difference imaging algorithm from raw fluorescence images, to generate an image with a higher resolution than superlinear microscopy images. We apply this approach to resolve two adjacent nanoparticles within a diffraction-limited area, improving the resolution to 130 nm. This work suggests a new scope for developing dynamic nonlinear fluorescent probes in super-resolution nanoscopy.
△ Less
Submitted 2 June, 2022;
originally announced June 2022.
-
Sedimentation of a surfactant-laden drop in a liquid with particles
Authors:
Xiaoxu Zhong
Abstract:
This project aims to study the sedimentation of a surfactant-laden drop in a liquid with particles. A 2D simulation is performed with MATLAB. The interface is captured by the front-tracking method. The local viscosity depends on the local particle concentration, which follows a power law. The surfactants not only decrease the surface tension but also induce a surface tension gradient. If the surfa…
▽ More
This project aims to study the sedimentation of a surfactant-laden drop in a liquid with particles. A 2D simulation is performed with MATLAB. The interface is captured by the front-tracking method. The local viscosity depends on the local particle concentration, which follows a power law. The surfactants not only decrease the surface tension but also induce a surface tension gradient. If the surface tension decreases, the settling velocity will decrease due to a larger deformation of the drop (i.e., the drop becomes more flat). Additionally, increasing the Peclet number (ratio of convection to diffusion on the interface) for surfactants will reduce the settling velocity due to a larger surface tension gradient.
△ Less
Submitted 8 April, 2022;
originally announced April 2022.
-
Multiphase curved boundary condition in lattice Boltzmann method
Authors:
Yichen Yao,
Yangsha Liu,
Xingguo Zhong,
Binghai Wen
Abstract:
The boundary treatment is fundamental for modeling fluid flows; especially, in the lattice Boltzmann method, the curved boundary conditions effectively improve the accuracy of single-phase simulations with complex-geometry boundaries. However, the conventional curved boundary conditions usually cause dramatic mass leakage or increase when they are directly used for multiphase flow simulations. We…
▽ More
The boundary treatment is fundamental for modeling fluid flows; especially, in the lattice Boltzmann method, the curved boundary conditions effectively improve the accuracy of single-phase simulations with complex-geometry boundaries. However, the conventional curved boundary conditions usually cause dramatic mass leakage or increase when they are directly used for multiphase flow simulations. We find that the principal reason is the absence of nonideal effect in the curved boundary conditions, followed by the calculation error. In this paper, incorporating the nonideal effect into the linear interpolation scheme and compensating for the interpolating error, we propose a multiphase curved boundary condition to treat the wetting boundaries with complex geometries. A series of static and dynamic multiphase simulations with large density ratio verify that the present scheme is accurate and ensures mass conservation.
△ Less
Submitted 13 May, 2022; v1 submitted 8 March, 2022;
originally announced March 2022.
-
High-order exceptional point in a nanofiber cavity quantum electrodynamics system
Authors:
Zigeng Li,
Xiaomiao Li,
Xiaolan Zhong
Abstract:
We present an all-fiber emitter-cavity quantum electrodynamics (QED) system which consists of two two-level emitters and a nanofiber cavity. Our scheme makes it possible to observe the higher-order exceptional points based on the coupling between the emitters and the nanofiber cavity. The effective gain of this cavity can be obtained by weakly driven to the nanofiber cavity via two identical laser…
▽ More
We present an all-fiber emitter-cavity quantum electrodynamics (QED) system which consists of two two-level emitters and a nanofiber cavity. Our scheme makes it possible to observe the higher-order exceptional points based on the coupling between the emitters and the nanofiber cavity. The effective gain of this cavity can be obtained by weakly driven to the nanofiber cavity via two identical laser fields, which will realize coherent perfect absorption (CPA) in the implementation of the experiments. Under the experimental feasible parameters, the Hamiltonian of this system is in the condition of pseudo-Hermiticity, which means that its eigenvalues can be made of one real and a pair of complex conjugates, or be all real. By controllably tuned the ratio of the two emitter-cavity coupling strengths, and the ratio of the decay rates of the emitters, we can discover both the three-order exceptional point (EP3) and the second-order exceptional point (EP2) without parity-time symmetry in our emitter-cavity system. These results can also be demonstrated by the total output spectra and transmission spectra. We also find that the symmetric modes come into being when the coupling strength greater than the critical coupling strength at EP3 points. Our proposal will provide a new method to realize higher-order exceptional points.
△ Less
Submitted 10 January, 2022;
originally announced January 2022.
-
Characterization of Pedestal Burst Instabilities during I-mode to H-mode Transition in the EAST Tokamak
Authors:
X. M. Zhong,
X. L. Zou,
A. D. Liu,
Y. T. Song,
G. Zhuang,
E. Z. Li,
B. Zhang,
J. Zhang,
C. Zhou,
X. Feng,
Y. M. Duan,
R. Ding,
H. Q. Liu,
B. Lv,
L. Wang,
L. Q. Xu,
L. Zhang,
Hailin Zhao,
Tao Zhang,
Qing Zang,
B. J. Ding,
M. H. Li,
C. M. Qin,
X. J. Wang,
X. J. Zhang
, et al. (1 additional authors not shown)
Abstract:
Quasi-periodic Pedestal Burst Instabilities (PBIs), featuring alternative turbulence suppression and bursts, have been clearly identified by various edge diagnostics during I-mode to H-mode transition in the EAST Tokamak. The radial distribution of the phase perturbation caused by PBI shows that PBI is localized in the pedestal. Prior to each PBI, a significant increase of density gradient close t…
▽ More
Quasi-periodic Pedestal Burst Instabilities (PBIs), featuring alternative turbulence suppression and bursts, have been clearly identified by various edge diagnostics during I-mode to H-mode transition in the EAST Tokamak. The radial distribution of the phase perturbation caused by PBI shows that PBI is localized in the pedestal. Prior to each PBI, a significant increase of density gradient close to the pedestal top can be clearly distinguished, then the turbulence burst is generated, accompanied by the relaxation of the density profile, and then induces an outward particle flux. The relative density perturbation caused by PBIs is about $6 \sim 8\%$. Statistic analyses show that the pedestal normalized density gradient triggering the first PBI has a threshold value, mostly in the range of $22 \sim 24$, suggesting that a PBI triggering instability could be driven by the density gradient. And the pedestal normalized density gradient triggering the last PBI is about $30 \sim 40$ and seems to increase with the loss power and the chord-averaged density. In addition, the frequency of PBI is likely to be inversely proportional to the chord-averaged density and the loss power. These results suggest that PBIs and the density gradient prompt increase prior to PBIs can be considered as the precursor for controlling I-H transition.
△ Less
Submitted 7 February, 2022; v1 submitted 1 November, 2021;
originally announced November 2021.
-
Site-Agnostic 3D Dose Distribution Prediction with Deep Learning Neural Networks
Authors:
Maryam Mashayekhi,
Itzel Ramirez Tapia,
Anjali Balagopal,
Xinran Zhong,
Azar Sadeghnejad Barkousaraie,
Rafe McBeth,
Mu-Han Lin,
Steve Jiang,
Dan Nguyen
Abstract:
Typically, the current dose prediction models are limited to small amounts of data and require re-training for a specific site, often leading to suboptimal performance. We propose a site-agnostic, 3D dose distribution prediction model using deep learning that can leverage data from any treatment site, thus increasing the total data available to train the model. Applying our proposed model to a new…
▽ More
Typically, the current dose prediction models are limited to small amounts of data and require re-training for a specific site, often leading to suboptimal performance. We propose a site-agnostic, 3D dose distribution prediction model using deep learning that can leverage data from any treatment site, thus increasing the total data available to train the model. Applying our proposed model to a new target treatment site requires only a brief fine-tuning of the model to the new data and involves no modifications to the model input channels or its parameters. Thus, it can be efficiently adapted to a different treatment site, even with a small training dataset.
△ Less
Submitted 14 June, 2021;
originally announced June 2021.
-
Experiment on scalable multi-user twin-field quantum key distribution network
Authors:
Xiaoqing Zhong,
Wenyuan Wang,
Reem Mandil,
Hoi-Kwong Lo,
Li Qian
Abstract:
Twin-field quantum key distribution (TFQKD) systems have shown great promise for implementing practical long-distance secure quantum communication due to its measurement-device-independent nature and its ability to offer fundamentally superior rate-loss scaling than point-to-point QKD systems. A surge of research and development effort in the last two years has produced many variants of protocols…
▽ More
Twin-field quantum key distribution (TFQKD) systems have shown great promise for implementing practical long-distance secure quantum communication due to its measurement-device-independent nature and its ability to offer fundamentally superior rate-loss scaling than point-to-point QKD systems. A surge of research and development effort in the last two years has produced many variants of protocols and experimental demonstrations. In terms of hardware topology, TFQKD systems interfering quantum signals from two remotely phase-locked laser sources are in essence giant Mach-Zehnder interferometers (MZIs) requiring active phase stabilization. Such configurations are inherently unsuitable for a TFQKD network, where more than one user-pair share the common quantum measurement station, because it is practically extremely difficult, if not impossible, to stabilize MZIs of largely disparate path lengths, a situation that is inevitable in a multi-user-pair TFQKD network. On the other hand, Sagnac interferometer based TFQKD systems exploiting the inherent phase stability of the Sagnac ring can implement asymmetric TFQKD, and are therefore eminently suitable for implementing a TFQKD network. In this work, we experimentally demonstrate a proof-of-principle multi-user-pair Sagnac TFQKD network where three user pairs sharing the same measurement station can perform pair-wise TFQKD through time multiplexing, with channel losses up to 58 dB, and channel loss asymmetry up to 15 dB. In some cases, the secure key rates still beat the rate-loss bounds for point-to-point repeaterless QKD systems, even in this network configuration. It is to our knowledge the first multi-user-pair TFQKD network demonstration, an important step in advancing quantum communication network technologies.
△ Less
Submitted 14 June, 2021;
originally announced June 2021.
-
Simultaneous Estimation of X-ray Back-Scatter and Forward-Scatter using Multi-Task Learning
Authors:
Philipp Roser,
Xia Zhong,
Annette Birkhold,
Alexander Preuhs,
Christopher Syben,
Elisabeth Hoppe,
Norbert Strobel,
Markus Kowarschik,
Rebecca Fahrig,
Andreas Maier
Abstract:
Scattered radiation is a major concern impacting X-ray image-guided procedures in two ways. First, back-scatter significantly contributes to patient (skin) dose during complicated interventions. Second, forward-scattered radiation reduces contrast in projection images and introduces artifacts in 3-D reconstructions. While conventionally employed anti-scatter grids improve image quality by blocking…
▽ More
Scattered radiation is a major concern impacting X-ray image-guided procedures in two ways. First, back-scatter significantly contributes to patient (skin) dose during complicated interventions. Second, forward-scattered radiation reduces contrast in projection images and introduces artifacts in 3-D reconstructions. While conventionally employed anti-scatter grids improve image quality by blocking X-rays, the additional attenuation due to the anti-scatter grid at the detector needs to be compensated for by a higher patient entrance dose. This also increases the room dose affecting the staff caring for the patient. For skin dose quantification, back-scatter is usually accounted for by applying pre-determined scalar back-scatter factors or linear point spread functions to a primary kerma forward projection onto a patient surface point. However, as patients come in different shapes, the generalization of conventional methods is limited. Here, we propose a novel approach combining conventional techniques with learning-based methods to simultaneously estimate the forward-scatter reaching the detector as well as the back-scatter affecting the patient skin dose. Knowing the forward-scatter, we can correct X-ray projections, while a good estimate of the back-scatter component facilitates an improved skin dose assessment. To simultaneously estimate forward-scatter as well as back-scatter, we propose a multi-task approach for joint back- and forward-scatter estimation by combining X-ray physics with neural networks. We show that, in theory, highly accurate scatter estimation in both cases is possible. In addition, we identify research directions for our multi-task framework and learning-based scatter estimation in general.
△ Less
Submitted 8 July, 2020;
originally announced July 2020.
-
Efficient experimental quantum fingerprinting with wavelength division multiplexing
Authors:
Xiaoqing Zhong,
Feihu Xu,
Hoi-Kwong Lo,
Li Qian
Abstract:
Quantum communication complexity studies the efficiency of information communication (that is, the minimum amount of communication required to achieve a certain task) using quantum states. One representative example is quantum fingerprinting, in which the simultaneous message passing model is considered and the minimum amount of communication could be exponentially smaller than the classical finge…
▽ More
Quantum communication complexity studies the efficiency of information communication (that is, the minimum amount of communication required to achieve a certain task) using quantum states. One representative example is quantum fingerprinting, in which the simultaneous message passing model is considered and the minimum amount of communication could be exponentially smaller than the classical fingerprinting protocol. Experimental demonstrations based on a practical quantum fingerprinting protocol where coherent states are used to construct the fingerprints, have successfully shown the superiority of quantum fingerprinting. However, as a consequence of using coherent states, the communication time in this coherent quantum fingerprinting (CQF) protocol is increased. Moreover, the minimum amount of information communicated in these experimental demonstrations is largely limited by the dark counts of the single photon detectors. Here, we propose to enhance the performance of the existing CQF protocol through applying wavelength division multiplexing (WDM) and simultaneous detection of multiple wavelength channels. We show that the new WDM-CQF protocol can potentially reduce the communication time significantly. More importantly, with the same experimental parameters, the amount of communication is much reduced in the new scheme compared with the original CQF protocol. The more wavelength channels are used, the less communication is required by WDM-CQF protocol. We also perform a proof-of-concept experimental demonstration of the new WDM-CQF protocol with 6 wavelength channels. The experimental results further validate that the new scheme with WDM not only beats the classical protocol, but also reduces the amount of communication required by the original CQF protocol by more than half.
△ Less
Submitted 12 May, 2020;
originally announced May 2020.
-
Pitfalls in interventional X-ray organ dose assessment -- combined experimental and computational phantom study: application to prostatic artery embolization
Authors:
Philipp Roser,
Annette Birkhold,
Xia Zhong,
Philipp Ochs,
Elizaveta Stepina,
Markus Kowarschik,
Rebecca Fahrig,
Andreas Maier
Abstract:
With X-ray radiation protection and dose management constantly gaining interest in interventional radiology, novel procedures often undergo prospective dose studies using anthropomorphic phantoms to determine expected dose values. Due to inherent uncertainties, these dose values might not allow for patient-specific risk assessment. Therefore, first the aim of this study is to quantify the influenc…
▽ More
With X-ray radiation protection and dose management constantly gaining interest in interventional radiology, novel procedures often undergo prospective dose studies using anthropomorphic phantoms to determine expected dose values. Due to inherent uncertainties, these dose values might not allow for patient-specific risk assessment. Therefore, first the aim of this study is to quantify the influence of these parameters on local X-ray dose to evaluate their relevance in the assessment of patient-specific organ doses. Second, this knowledge further enables validating a simulation approach, which allows employing physiological material models and patient-specific geometries. Phantom dosimetry experiments using MOSFET dosimeters were conducted reproducing imaging scenarios in prostatic arterial embolization (PAE). Associated organ-equivalent dose of prostate, bladder, colon and skin was determined. Dose deviation induced by possible small displacements of the patient was reproduced by moving the X-ray source. Dose deviation induced by material differences was investigated by analyzing two different commonly used phantoms. We reconstructed the experiments using Monte Carlo (MC) simulations, a reference male geometry, and different material properties. Overall, MC simulated organ dose values are in accordance with the measured ones for the majority of cases. Marginal displacements of X-ray source relative to the phantoms lead to deviations of 6% to 135% in organ dose values, while skin dose remains relatively constant. Regarding the impact of phantom material composition, underestimation of internal organ dose values by 12% to 20% is prevalent in all simulated phantoms. Skin dose, however, can be estimated with low deviation of 1% to 8% at least for two materials. Prospective reference dose studies might not extend to precise patient-specific dose assessment.
△ Less
Submitted 7 May, 2020;
originally announced May 2020.
-
Effects of Tissue Material Properties on X-Ray Image, Scatter and Patient Dose Determined using Monte Carlo Simulations
Authors:
Philipp Roser,
Annette Birkhold,
Xia Zhong,
Elizaveta Stepina,
Markus Kowarschik,
Rebecca Fahrig,
Andreas Maier
Abstract:
With increasing patient and staff X-ray radiation awareness, many efforts have been made to develop accurate patient dose estimation methods. To date, Monte Carlo (MC) simulations are considered golden standard to simulate the interaction of X-ray radiation with matter. However, sensitivity of MC simulation results to variations in the experimental or clinical setup of image guided interventional…
▽ More
With increasing patient and staff X-ray radiation awareness, many efforts have been made to develop accurate patient dose estimation methods. To date, Monte Carlo (MC) simulations are considered golden standard to simulate the interaction of X-ray radiation with matter. However, sensitivity of MC simulation results to variations in the experimental or clinical setup of image guided interventional procedures are only limited studied. In particular, the impact of patient material compositions is poorly investigated. This is mainly due to the fact, that these methods are commonly validated in phantom studies utilizing a single anthropomorphic phantom. In this study, we therefore investigate the impact of patient material parameters mapping on the outcome of MC X-ray dose simulations. A computation phantom geometry is constructed and three different commonly used material composition mappings are applied. We used the MC toolkit Geant4 to simulate X-ray radiation in an interventional setup and compared the differences in dose deposition, scatter distributions and resulting X-ray images. The evaluation shows a discrepancy between different material composition mapping up to 20 % concerning directly irradiated organs. These results highlight the need for standardization of material composition mapping for MC simulations in a clinical setup.
△ Less
Submitted 7 May, 2020;
originally announced May 2020.
-
Edge Temperature Ring Oscillation Modulated by Turbulence Transition for Sustaining Stationary Improved Energy Confinement Plasmas
Authors:
A. D. Liu,
X. L. Zou,
M. K. Han,
T. B. Wang,
C. Zhou,
M. Y. Wang,
Y. M. Duan,
G. Verdoolaege,
J. Q. Dong,
Z. X. Wang,
X. Feng,
J. L. Xie,
G. Zhuang,
W. X. Ding,
S. B. Zhang,
Y. Liu,
H. Q. Liu,
L. Wang,
Y. Y. Li,
Y. M. Wang,
B. Lv,
G. H. Hu,
Q. Zhang,
S. X. Wang,
H. L. Zhao
, et al. (11 additional authors not shown)
Abstract:
A reproducible stationary improved confinement mode (I-mode) has been achieved recently in the Experimental Advanced Superconducting Tokamak, featuring good confinement without particle transport barrier, which could be beneficial to solving the heat flux problem caused by edge localized modes (ELM) and the helium ash problem for future fusion reactors. The microscopic mechanism of sustaining stat…
▽ More
A reproducible stationary improved confinement mode (I-mode) has been achieved recently in the Experimental Advanced Superconducting Tokamak, featuring good confinement without particle transport barrier, which could be beneficial to solving the heat flux problem caused by edge localized modes (ELM) and the helium ash problem for future fusion reactors. The microscopic mechanism of sustaining stationary I-mode, based on the coupling between turbulence transition and the edge temperature oscillation, has been discovered for the first time. A radially localized edge temperature ring oscillation (ETRO) with azimuthally symmetric structure ($n=0$,$m=0$) has been identified and it is caused by alternative turbulence transitions between ion temperature gradient modes (ITG) and trapped electron modes (TEM). The ITG-TEM transition is controlled by local electron temperature gradient and consistent with the gyrokinetic simulations. The self-organizing system consisting with ETRO, turbulence and transport transitions plays the key role in sustaining the I-mode confinement. These results provide a novel physics basis for accessing, maintaining and controlling stationary I-mode in the future.
△ Less
Submitted 19 February, 2020;
originally announced February 2020.
-
Double lattice potential for molecular dynamics simulation of silicon with demonstrated validity
Authors:
Hui Zhang,
Chongyang Wei,
Zhongwu Liu,
Xichun Zhong,
Dongling Jiao,
Wanqi Qiu,
Hongya Yu
Abstract:
To reproduce the diamond structure of silicon, double lattice (DL) potential constructed from two interatomic potentials for face centered cubic (fcc) lattice, is proposed for molecular dynamics (MD) simulations. For the validity test of MD simulation, the Tersoff potential, the Stillinger and Weber (SW) potential, the environment-dependent interatomic (EDI) potential, the charge optimized many-bo…
▽ More
To reproduce the diamond structure of silicon, double lattice (DL) potential constructed from two interatomic potentials for face centered cubic (fcc) lattice, is proposed for molecular dynamics (MD) simulations. For the validity test of MD simulation, the Tersoff potential, the Stillinger and Weber (SW) potential, the environment-dependent interatomic (EDI) potential, the charge optimized many-body (COMB) potential, and the modified embedded-atom (MEAM) potential have been also employed for comparison. The crystal lattice of simulated silicon system is identified by calculating the distribution functions of the distances between the atoms and the angles between the lines linking an atom with its nearest neighbors. The results are also compared with the perfect silicon crystal. The crystal lattice, the crystallization temperature, and elastic constants have been calculated from MD simulations using above potentials. The results show that the systems with modified Tersoff, SW, EDI, COMB, and MEAM potentials could not exhibit the diamond structure and only the DL potential gives diamond lattice. The ground state for DL potential is the wurtzite structure, and the metastable state formed during rapid cooling is the cubic diamond structure. The physical parameters obtained from the simulation with DL potential are in agreement with the experiment results. This work indicated that only DL potential is valid for MD simulation of silicon crystal among above various potentials.
△ Less
Submitted 11 August, 2020; v1 submitted 3 February, 2020;
originally announced February 2020.
-
An automatic deep learning-based workflow for glioblastoma survival prediction using pre-operative multimodal MR images
Authors:
Jie Fu,
Kamal Singhrao,
Xinran Zhong,
Yu Gao,
Sharon Qi,
Yingli Yang,
Dan Ruan,
John H Lewis
Abstract:
We proposed a fully automatic workflow for glioblastoma (GBM) survival prediction using deep learning (DL) methods. 285 glioma (210 GBM, 75 low-grade glioma) patients were included. 163 of the GBM patients had overall survival (OS) data. Every patient had four pre-operative MR scans and manually drawn tumor contours. For automatic tumor segmentation, a 3D convolutional neural network (CNN) was tra…
▽ More
We proposed a fully automatic workflow for glioblastoma (GBM) survival prediction using deep learning (DL) methods. 285 glioma (210 GBM, 75 low-grade glioma) patients were included. 163 of the GBM patients had overall survival (OS) data. Every patient had four pre-operative MR scans and manually drawn tumor contours. For automatic tumor segmentation, a 3D convolutional neural network (CNN) was trained and validated using 122 glioma patients. The trained model was applied to the remaining 163 GBM patients to generate tumor contours. The handcrafted and DL-based radiomic features were extracted from auto-contours using explicitly designed algorithms and a pre-trained CNN respectively. 163 GBM patients were randomly split into training (n=122) and testing (n=41) sets for survival analysis. Cox regression models with regularization techniques were trained to construct the handcrafted and DL-based signatures. The prognostic power of the two signatures was evaluated and compared. The 3D CNN achieved an average Dice coefficient of 0.85 across 163 GBM patients for tumor segmentation. The handcrafted signature achieved a C-index of 0.64 (95% CI: 0.55-0.73), while the DL-based signature achieved a C-index of 0.67 (95% CI: 0.57-0.77). Unlike the handcrafted signature, the DL-based signature successfully stratified testing patients into two prognostically distinct groups (p-value<0.01, HR=2.80, 95% CI: 1.26-6.24). The proposed 3D CNN generated accurate GBM tumor contours from four MR images. The DL-based signature resulted in better GBM survival prediction, in terms of higher C-index and significant patient stratification, than the handcrafted signature. The proposed automatic radiomic workflow demonstrated the potential of improving patient stratification and survival prediction in GBM patients.
△ Less
Submitted 29 January, 2020;
originally announced January 2020.
-
Proof-of-principle experimental demonstration of twin-field quantum key distribution over optical channels with asymmetric losses
Authors:
Xiaoqing Zhong,
Wenyuan Wang,
Li Qian,
Hoi-Kwong Lo
Abstract:
Twin-field (TF) quantum key distribution (QKD) is highly attractive because it can beat the fundamental limit of secret key rate for point-to-point QKD without quantum repeaters. Many theoretical and experimental studies have shown the superiority of TFQKD in long-distance communication. All previous experimental implementations of TFQKD have been done over optical channels with symmetric losses.…
▽ More
Twin-field (TF) quantum key distribution (QKD) is highly attractive because it can beat the fundamental limit of secret key rate for point-to-point QKD without quantum repeaters. Many theoretical and experimental studies have shown the superiority of TFQKD in long-distance communication. All previous experimental implementations of TFQKD have been done over optical channels with symmetric losses. But in reality, especially in a network setting, the distances between users and the middle node could be very different. In this paper, we perform a first proof-of-principle experimental demonstration of TFQKD over optical channels with asymmetric losses. We compare two compensation strategies, that are (1) applying asymmetric signal intensities and (2) adding extra losses, and verify that strategy (1) provides much better key rate. Moreover, the higher the loss, the more key rate enhancement it can achieve. By applying asymmetric signal intensities, TFQKD with asymmetric channel losses not only surpasses the fundamental limit of key rate of point-to-point QKD for 50 dB overall loss, but also has key rate as high as $2.918\times10^{-6}$ for 56 dB overall loss. Whereas no keys are obtained with strategy (2) for 56 dB loss. The increased key rate and enlarged distance coverage of TFQKD with asymmetric channel losses guarantee its superiority in long-distance quantum networks.
△ Less
Submitted 28 January, 2020;
originally announced January 2020.
-
Self-formed 2D/3D Heterostructure on the Edge of 2D Ruddlesden-Popper Hybrid Perovskites Responsible for Intriguing Optoelectronic Properties and Higher Cell Efficiency
Authors:
Zhaojun Qin,
Shenyu Dai,
Chalapathi Charan Gajjala,
Chong Wang,
Viktor G. Hadjiev,
Guang Yang,
Jiabing Li,
Xin Zhong,
Zhongjia Tang,
Yan Yao,
Arnold M. Guloy,
Rohith Reddy,
David Mayerich,
Liangzi Deng,
Qingkai Yu,
Guoying Feng,
Zhiming Wang,
Jiming Bao
Abstract:
The observation of low energy edge photoluminescence and its beneficial effect on the solar cell efficiency of Ruddlesden-Popper perovskites has unleashed an intensive research effort to reveal its origin. This effort, however, has been met with more challenges as the underlying material structure has still not been identified; new modellings and observations also do not seem to converge. Using 2D…
▽ More
The observation of low energy edge photoluminescence and its beneficial effect on the solar cell efficiency of Ruddlesden-Popper perovskites has unleashed an intensive research effort to reveal its origin. This effort, however, has been met with more challenges as the underlying material structure has still not been identified; new modellings and observations also do not seem to converge. Using 2D (BA)2(MA)2Pb3Br10 as an example, we show that 3D MAPbBr3 is formed due to the loss of BA on the edge. This self-formed MAPbBr3 can explain the reported edge emission under various conditions, while the reported intriguing optoelectronic properties such as fast exciton trapping from the interior 2D perovskite, rapid exciton dissociation and long carrier lifetime can be understood via the self-formed 2D/3D lateral perovskite heterostructure. The 3D perovskite is identified by submicron infrared spectroscopy, the emergence of XRD signature from freezer-milled nanometer-sized 2D perovskite and its photoluminescence response to external hydrostatic pressure. The revelation of this edge emission mystery and the identification of a self-formed 2D/3D heterostructure provide a new approach to engineering 2D perovskites for high-performance optoelectronic devices.
△ Less
Submitted 26 January, 2020;
originally announced January 2020.
-
Deep Learning-based Radiomic Features for Improving Neoadjuvant Chemoradiation Response Prediction in Locally Advanced Rectal Cancer
Authors:
Jie Fu,
Xinran Zhong,
Ning Li,
Ritchell Van Dams,
John Lewis,
Kyunghyun Sung,
Ann C. Raldow,
Jing Jin,
X. Sharon Qi
Abstract:
Radiomic features achieve promising results in cancer diagnosis, treatment response prediction, and survival prediction. Our goal is to compare the handcrafted (explicitly designed) and deep learning (DL)-based radiomic features extracted from pre-treatment diffusion-weighted magnetic resonance images (DWIs) for predicting neoadjuvant chemoradiation treatment (nCRT) response in patients with local…
▽ More
Radiomic features achieve promising results in cancer diagnosis, treatment response prediction, and survival prediction. Our goal is to compare the handcrafted (explicitly designed) and deep learning (DL)-based radiomic features extracted from pre-treatment diffusion-weighted magnetic resonance images (DWIs) for predicting neoadjuvant chemoradiation treatment (nCRT) response in patients with locally advanced rectal cancer (LARC). 43 patients receiving nCRT were included. All patients underwent DWIs before nCRT and total mesorectal excision surgery 6-12 weeks after completion of nCRT. Gross tumor volume (GTV) contours were drawn by an experienced radiation oncologist on DWIs. The patient-cohort was split into the responder group (n=22) and the non-responder group (n=21) based on the post-nCRT response assessed by postoperative pathology, MRI or colonoscopy. Handcrafted and DL-based features were extracted from the apparent diffusion coefficient (ADC) map of the DWI using conventional computer-aided diagnosis methods and a pre-trained convolution neural network, respectively. Least absolute shrinkage and selection operator (LASSO)-logistic regression models were constructed using extracted features for predicting treatment response. The model performance was evaluated with repeated 20 times stratified 4-fold cross-validation using receiver operating characteristic (ROC) curves and compared using the corrected resampled t-test. The model built with handcrafted features achieved the mean area under the ROC curve (AUC) of 0.64, while the one built with DL-based features yielded the mean AUC of 0.73. The corrected resampled t-test on AUC showed P-value < 0.05. DL-based features extracted from pre-treatment DWIs achieved significantly better classification performance compared with handcrafted features for predicting nCRT response in patients with LARC.
△ Less
Submitted 9 September, 2019;
originally announced September 2019.
-
I-mode investigation on the Experimental Advanced Superconducting Tokamak
Authors:
X. Feng,
A. D. Liu,
C. Zhou,
Z. X. Liu,
M. Y. Wang,
G. Zhuang,
X. L. Zou,
T. B. Wang,
Y. Z. Zhang,
J. L. Xie,
H. Q. Liu,
T. Zhang,
Y. Liu,
Y. M. Duan,
L. Q. Hu,
G. H. Hu,
D. F. Kong,
S. X. Wang,
H. L. Zhao,
Y. Y. Li,
L. M. Shao,
T. Y. Xia,
W. X. Ding,
T. Lan,
H. Li
, et al. (13 additional authors not shown)
Abstract:
By analyzing large quantities of discharges in the unfavorable ion $ \vec B\times \nabla B $ drift direction, the I-mode operation has been confirmed in EAST tokamak. During the L-mode to I-mode transition, the energy confinement has a prominent improvement by the formation of a high-temperature edge pedestal, while the particle confinement remains almost identical to that in the L-mode. Similar w…
▽ More
By analyzing large quantities of discharges in the unfavorable ion $ \vec B\times \nabla B $ drift direction, the I-mode operation has been confirmed in EAST tokamak. During the L-mode to I-mode transition, the energy confinement has a prominent improvement by the formation of a high-temperature edge pedestal, while the particle confinement remains almost identical to that in the L-mode. Similar with the I-mode observation on other devices, the $ E_r $ profiles obtained by the eight-channel Doppler backscattering system (DBS8)\cite{J.Q.Hu} show a deeper edge $ E_r $ well in the I-mode than that in the L-mode. And a weak coherent mode (WCM) with the frequency range of 40-150 kHz is observed at the edge plasma with the radial extend of about 2-3 cm. WCM could be observed in both density fluctuation and radial electric field fluctuation, and the bicoherence analyses showed significant couplings between WCM and high frequency turbulence, implying that the $ E_r $ fluctuation and the caused flow shear from WCM should play an important role during I-mode. In addition, a low-frequency oscillation with a frequency range of 5-10 kHz is always accompanied with WCM, where GAM intensity is decreased or disappeared. Many evidences show that the a low-frequency oscillation may be a novel kind of limited cycle oscillation but further investigations are needed to explain the new properties such as the harmonics and obvious magnetical perturbations.
△ Less
Submitted 31 May, 2019; v1 submitted 13 February, 2019;
originally announced February 2019.
-
An Efficient Solver for Cumulative Density Function-based Solutions of Uncertain Kinematic Wave Models
Authors:
Ming Cheng,
Yi Qin,
Akil Narayan,
Xinghui Zhong,
Xueyu Zhu,
Peng Wang
Abstract:
We develop a numerical framework to implement the cumulative density function (CDF) method for obtaining the probability distribution of the system state described by a kinematic wave model. The approach relies on Monte Carlo Simulations (MCS) of the fine-grained CDF equation of system state, as derived by the CDF method. This fine-grained CDF equation is solved via the method of characteristics.…
▽ More
We develop a numerical framework to implement the cumulative density function (CDF) method for obtaining the probability distribution of the system state described by a kinematic wave model. The approach relies on Monte Carlo Simulations (MCS) of the fine-grained CDF equation of system state, as derived by the CDF method. This fine-grained CDF equation is solved via the method of characteristics. Each method of characteristics solution is far more computationally efficient than the direct solution of the kinematic wave model, and the MCS estimator of the CDF converges relatively quickly. We verify the accuracy and robustness of our procedure via comparison with direct MCS of a particular kinematic wave system, the Saint-Venant equation.
△ Less
Submitted 24 January, 2019;
originally announced January 2019.
-
Designing ABO3 crystal structure with Lennard-Jones interatomic potentials
Authors:
Hui Zhang,
Zhongwu Liu,
Xichun Zhong,
Dongling Jiao,
Wanqi Qiu
Abstract:
In this paper, our goal is to design ABO3 crystal structure with simple interatomic Lennard-Jones (LJ) potentials and without setting any initial Bravais lattice and it is carried out by molecular dynamics (MD) simulation. In the simulation, the equilibrium distances between atoms are determined by LJ potentials. For the identification of the microstructure of simulated system, we have calculated…
▽ More
In this paper, our goal is to design ABO3 crystal structure with simple interatomic Lennard-Jones (LJ) potentials and without setting any initial Bravais lattice and it is carried out by molecular dynamics (MD) simulation. In the simulation, the equilibrium distances between atoms are determined by LJ potentials. For the identification of the microstructure of simulated system, we have calculated the distribution functions of both the angles between one atom and its nearest neighbors and the distances between atoms and compared the results with those of ideal lattices. The results have clearly shown that we have successfully produced ABO3 crystal structure by MD simulation.
△ Less
Submitted 14 September, 2018;
originally announced September 2018.
-
Lennard-Jones interatomic potentials for the allotropes of carbon
Authors:
Hui Zhang,
Zhongwu Liu,
Xichun Zhong,
Dongling Jiao,
Wanqi Qiu
Abstract:
Finding appropriate interatomic potentials which can accurately describe the crystal structure of material is one of important topics in material science. In this paper, several interatomic potentials which comprise of Lennard-Jones (LJ) potentials have been proposed for describing both the crystal structures and the evolution of microstructure of the allotropes of carbon such as diamond and graph…
▽ More
Finding appropriate interatomic potentials which can accurately describe the crystal structure of material is one of important topics in material science. In this paper, several interatomic potentials which comprise of Lennard-Jones (LJ) potentials have been proposed for describing both the crystal structures and the evolution of microstructure of the allotropes of carbon such as diamond and graphite. The validity of these LJ potentials can be checked by molecular dynamics (MD) simulation. For the lattice identification of simulated systems, we have calculated the distribution functions of the angles between one atom and its nearest neighbors and the distances between atoms and checked the atomic arrangements. Our simulated results have clearly demonstrated that we have successfully produced diamond and graphite structures by MD simulations and with the above LJ potentials.
△ Less
Submitted 1 July, 2018; v1 submitted 27 May, 2018;
originally announced May 2018.
-
Crystallization and non-crystallization of Lennard-Jones particles studied by molecular dynamics simulation
Authors:
Hui Zhang,
Zhongwu Liu,
Xichun Zhong,
Dongling Jiao,
Wanqi Qiu
Abstract:
What lattice Lennard-Jones (LJ) solid favors, the lattice identification of simulated system and the microstructures of liquid and non-crystalline solid are three important questions in condensed physics and material science and are addressed in this paper. Both the crystallization and non-crystallization of LJ particles have been investigated by molecular dynamic (MD) simulation without setting a…
▽ More
What lattice Lennard-Jones (LJ) solid favors, the lattice identification of simulated system and the microstructures of liquid and non-crystalline solid are three important questions in condensed physics and material science and are addressed in this paper. Both the crystallization and non-crystallization of LJ particles have been investigated by molecular dynamic (MD) simulation without setting any initial Bravais lattice. To identify the Bravais lattice of simulated system, two distribution functions of both the angles between one particle and its nearest neighbors and the distances between particles have been proposed. The final identification can be made by comparing these two calculated distribution functions with those of ideal Bravais lattices and checking the particle arrangement of simulated system. Our results have shown that simulated systems show either the face-centered cubic (fcc) lattice or the hexagonal close-packed (hcp) lattice. The microstructure of non-crystalline system is similar to that of LJ liquid at a temperature near the crystallization temperature, and shows no order of the second nearest neighbors in comparison with that of crystalline system. This paper has proposed a new way of investigating the microstructure of material and its evolution, and paved the way for MD simulation of large scale particle system consisting of more than one million particles.
△ Less
Submitted 18 June, 2018; v1 submitted 20 May, 2018;
originally announced May 2018.
-
A singularity-free analytic solution of rise dynamics of a liquid in a vertical cylindrical capillary
Authors:
Xiaoxu Zhong,
Bohua Sun,
Shijun Liao
Abstract:
Capillary driven flow is a famous problem in fluid dynamics which dates back to Leonardo da Vinci. In this paper, we apply an analytic approximation method for highly nonlinear problem, namely the homotopy analysis method (HAM), to a model of the meniscus movement in a uniform vertical circular tube. Convergent explicit series solution is successfully obtained. Our results agree well with the nume…
▽ More
Capillary driven flow is a famous problem in fluid dynamics which dates back to Leonardo da Vinci. In this paper, we apply an analytic approximation method for highly nonlinear problem, namely the homotopy analysis method (HAM), to a model of the meniscus movement in a uniform vertical circular tube. Convergent explicit series solution is successfully obtained. Our results agree well with the numerical results given by the symbolic computing software Mathematica using six-order Runge-Kutta methods. More importantly, our analytic solution is valid in the whole region of physical parameters, and therefore can predict whether the path of liquid is monotonic or oscillatory. This kind of solution, to the best knowledge of the authors, has never been reported in the past, which might greatly deepen our understandings about capillarity.
△ Less
Submitted 23 January, 2018;
originally announced January 2018.
-
Electric-field control of oxygen vacancy and magnetic phase transition in cobaltite/manganite bilayer
Authors:
B. Cui,
C. Song,
F. Li,
X. Y. Zhong,
Z. C. Wang,
P. Werner,
Y. D. Gu,
H. Q. Wu,
J. J. Peng,
M. S. Saleem,
S. S. P. Parkin,
F. Pan
Abstract:
Manipulation of oxygen vacancies (V_O) in single oxide layers by varying the electric field can result in significant modulation of the ground state. However, in many oxide multilayers with strong application potentials, e.g. ferroelectric tunnel junctions and solid-oxide fuel cells, understanding V_O behaviour in various layers under an applied electric field remains a challenge, owing to complex…
▽ More
Manipulation of oxygen vacancies (V_O) in single oxide layers by varying the electric field can result in significant modulation of the ground state. However, in many oxide multilayers with strong application potentials, e.g. ferroelectric tunnel junctions and solid-oxide fuel cells, understanding V_O behaviour in various layers under an applied electric field remains a challenge, owing to complex V_O transport between different layers. By sweeping the external voltage, a reversible manipulation of V_O and a corresponding fixed magnetic phase transition sequence in cobaltite/manganite (SrCoO3-x/La0.45Sr0.55MnO3-y) heterostructures are reported. The magnetic phase transition sequence confirms that the priority of electric-field-induced V_O formation/annihilation in the complex bilayer system is mainly determined by the V_O formation energies and Gibbs free energy differences, which is supported by theoretical analysis. We not only realize a reversible manipulation of the magnetic phase transition in an oxide bilayer, but also provide insight into the electric field control of V_O engineering in heterostructures.
△ Less
Submitted 31 October, 2017;
originally announced December 2017.
-
On the Limiting Stokes' Wave of Extreme Height in Arbitrary Water Depth
Authors:
Xiaoxu Zhong,
Shijun Liao
Abstract:
As mentioned by Schwartz (1974) and Cokelet (1977), it was failed to gain convergent results of limiting Stokes' waves in extremely shallow water by means of perturbation methods even with the aid of extrapolation techniques such as Padé approximant. Especially, it is extremely difficult for traditional analytic/numerical approaches to present the wave profile of limiting waves with a sharp crest…
▽ More
As mentioned by Schwartz (1974) and Cokelet (1977), it was failed to gain convergent results of limiting Stokes' waves in extremely shallow water by means of perturbation methods even with the aid of extrapolation techniques such as Padé approximant. Especially, it is extremely difficult for traditional analytic/numerical approaches to present the wave profile of limiting waves with a sharp crest of $120^\circ$ included angle first mentioned by Stokes in 1880s. Thus, traditionally, different wave models are used for waves in different water depths. In this paper, by means of the homotopy analysis method (HAM), an analytic approximation method for highly nonlinear equations, we successfully gain convergent results (and especially the wave profiles) of the limiting Stokes' waves with this kind of sharp crest in arbitrary water depth, even including solitary waves of extreme form in extremely shallow water, without using any extrapolation techniques. Therefore, in the frame of the HAM, the Stokes' wave can be used as a unified theory for all kinds of waves, including periodic waves in deep and intermediate depth, cnoidal waves in shallow water and solitary waves in extremely shallow water.
△ Less
Submitted 13 February, 2018; v1 submitted 7 September, 2017;
originally announced September 2017.
-
Study on high order modes in a beta=0.09 srf hwr cavity for 100 ma proton acceleration
Authors:
H. T. X. Zhong,
F. Zhu,
S. W. Quan,
F. Wang,
K. X. Liu
Abstract:
There's presently a growing demand for cw high current proton and deuteron linear accelerators based on superconducting technology to better support various fields of science. Up to now, high order modes (HOMs) studies induced by ion beams with current higher than 10 mA and even 100 mA accelerated by low beta non-elliptical Superconducting rf (SRF) cavities are very few. Peking University has rece…
▽ More
There's presently a growing demand for cw high current proton and deuteron linear accelerators based on superconducting technology to better support various fields of science. Up to now, high order modes (HOMs) studies induced by ion beams with current higher than 10 mA and even 100 mA accelerated by low beta non-elliptical Superconducting rf (SRF) cavities are very few. Peking University has recently designed and fabricated a beta=0.09 162.5 MHz HWR cavity to study the key physics problems in accelerating beam with current of about 100mA. This paper focuses on the study of the HOM-induced power in this cavity. The incoherent beam energy loss induced by 100 mA beam through the HWR SRF cavity were obtained from both time domain solver and frequency domain eigenmodes spectrum method. We also analysed the possibility of coherent excitation of this cavity considering of manufacture errors.
△ Less
Submitted 13 February, 2017;
originally announced February 2017.
-
Self-deformation in a dc driven helium jet micro discharge
Authors:
Shaofeng Xu,
Xiaoxia Zhong
Abstract:
We report on the experimental observation of three dimensional self-deformation in an atmospheric micro discharge of the helium microjet through a tube into the ambient air upon a water electrode. The geometry of the discharge system is axial symmetric. While decreasing the discharge current, three dimensional collective motion of plasma filaments are directly observed. The three dimensional confi…
▽ More
We report on the experimental observation of three dimensional self-deformation in an atmospheric micro discharge of the helium microjet through a tube into the ambient air upon a water electrode. The geometry of the discharge system is axial symmetric. While decreasing the discharge current, three dimensional collective motion of plasma filaments are directly observed. The three dimensional configuration of the discharge self changed from an axial symmetrical horn to a rectangular horn when the water acts as a cathode.
△ Less
Submitted 1 January, 2016;
originally announced January 2016.
-
Non-linear macro evolution of a dc driven micro atmospheric glow discharge
Authors:
Shaofeng Xu,
Xiaoxia Zhong
Abstract:
We studied the macro evolution of the micro atmospheric glow discharge generated between a micro argon jet into ambient air and static water. The micro discharge behaves similarly to a complex ecosystem. Non-linear behaviors are found for the micro discharge when the water acts as a cathode, different from the discharge when water behaves as an anode. Groups of snapshots of the micro discharge for…
▽ More
We studied the macro evolution of the micro atmospheric glow discharge generated between a micro argon jet into ambient air and static water. The micro discharge behaves similarly to a complex ecosystem. Non-linear behaviors are found for the micro discharge when the water acts as a cathode, different from the discharge when water behaves as an anode. Groups of snapshots of the micro discharge formed at different discharge currents are captured by an intensified charge-coupled device with controlled exposure time, and each group consisted of 256 images taken in succession. Edge detection methods are used to identify the water surface and then the total brightness is defined by adding up the signal counts over the area of the micro discharge. Motions of the water surface at different discharge currents show that the water surface lowers increasingly rapidly when the water acts as a cathode. In contrast, the water surface lowers at a constant speed when the water behaves as an anode. The light curves are similar to logistic growth curves, suggesting that a self-inhibition process occurs in the micro discharge. Meanwhile, the total brightness increases linearly during the same time when the water acts as an anode. Discharge-water interactions cause the micro discharge to evolve. The charged particle bomb process is probably responsible for the different behavior of the micro discharges when the water acts as cathode and anode.
△ Less
Submitted 15 October, 2015;
originally announced October 2015.