Showing 1–50 of 82 results for author: Yin, Y

Continuous broadband Rydberg receiver using AC Stark shifts and Floquet States

Authors: Danni Song, Yuechun Jiao, Jinlian Hu, Yuwen Yin, Zhenhua Li, Yunhui He, Jingxu Bai, Jianming Zhao, Suotang Jia

Abstract: We demonstrate the continuous broadband microwave receivers based on AC Stark shifts and Floquet States of Rydberg levels in a cesium atomic vapor cell. The resonant transition frequency of two adjacent Rydberg states 78$S_{1/2}$ and 78$P_{1/2}$ is tuned based on AC Stark effect of 70~MHz Radio frequency (RF) field that is applied outside the vapor cell. Meanwhile, the Rydberg states also exhibit… ▽ More We demonstrate the continuous broadband microwave receivers based on AC Stark shifts and Floquet States of Rydberg levels in a cesium atomic vapor cell. The resonant transition frequency of two adjacent Rydberg states 78$S_{1/2}$ and 78$P_{1/2}$ is tuned based on AC Stark effect of 70~MHz Radio frequency (RF) field that is applied outside the vapor cell. Meanwhile, the Rydberg states also exhibit Floquet even-order sidebands that are used to extend the bandwidths further. We achieve microwave electric field measurements over 1.172~GHz of continuous frequency range. The sensitivity of the Rydberg receiver with heterodyne technique in the absence of RF field is 280.2~nVcm$^{-1}$Hz$^{-1/2}$, while it is dramatically decreased with tuning the resonant transition frequency in the presence of RF field. Surprisingly, the sensitivity can be greatly improved if the microwave field couples the Floquet sideband transition. The achieving of continuous frequency and high sensitivity microwave detection will promote the application of Rydberg receiver in the radar technique and wireless communication. △ Less

Submitted 8 July, 2024; originally announced July 2024.

Comments: 5 pages, 4 figures

Periodic domain inversion in single crystal barium titanate-on-insulator thin film

Authors: Pragati Aashna, Hong-Lin Lin, Yu Cao, Yuhui Yin, Yuan Gao, Sakthi Sanjeev Mohanraj, Di Zhu, Aaron Danner

Abstract: We report experimentally achieving first-ever electric field periodic poling of single crystal barium titanate (BTO, or BaTiO3) thin film on insulator. Owing to the outstanding optical nonlinearities of BTO, this result is a key step towards achieving quasi-phase-matching in BTO. We first grow the BTO thin film on a dysprosium scandate substrate using pulsed laser deposition with a thin layer of s… ▽ More We report experimentally achieving first-ever electric field periodic poling of single crystal barium titanate (BTO, or BaTiO3) thin film on insulator. Owing to the outstanding optical nonlinearities of BTO, this result is a key step towards achieving quasi-phase-matching in BTO. We first grow the BTO thin film on a dysprosium scandate substrate using pulsed laser deposition with a thin layer of strontium ruthenate later serving as the bottom electrode for poling. We present characterization of the BTO thin film using x-ray diffraction and piezo-response force microscopy to clearly demonstrate single crystal, single domain growth of the film which enables the desired periodic poling. To investigate the poling quality, we apply both non-destructive piezo force response microscopy and destructive etching-assisted scanning electron microscopy and we show that high quality, uniform and intransient poling with 50 % duty cycle and periods ranging from 2 μm to 10 μm is achieved. The successful realization of periodic poling in BTO thin film unlocks the potential for highly efficient nonlinear processes under quasi-phase-matching that seemed far-fetched with prior polycrystalline BTO thin films which predominantly relied on efficiency-limited random or non-phase matching conditions and is a key step towards integration of BTO photonic devices. △ Less

Submitted 1 July, 2024; originally announced July 2024.

Genetics-based deperturbation analysis for the spin-orbit coupled ${\rm A}^1Σ^+$ and ${\rm b}^3Π_{0^+}$ states of LiRb

Authors: Yide Yin, Xuhui Bai, Xuechun Li, Xin-Yu Luo, Jie Yu, Gaoren Wang, Yongchang Han

Abstract: We present a deperturbation analysis of the spin-orbit coupled $\rm A^1Σ^+$ and $\rm b^3Π_{0^+}$ states of LiRb based on the rovibrational energy levels observed previously by photoassociation spectroscopy in bosonic $^7$Li$^{85}$Rb molecule. Using the genetic algorithm, we fit the potential energy curves of the $\rm A^1Σ^+$ state and the $\rm b^3Π$ state into point-wise form. We then fit these po… ▽ More We present a deperturbation analysis of the spin-orbit coupled $\rm A^1Σ^+$ and $\rm b^3Π_{0^+}$ states of LiRb based on the rovibrational energy levels observed previously by photoassociation spectroscopy in bosonic $^7$Li$^{85}$Rb molecule. Using the genetic algorithm, we fit the potential energy curves of the $\rm A^1Σ^+$ state and the $\rm b^3Π$ state into point-wise form. We then fit these point-wise potentials along with the spin-orbit coupling into expanded Morse oscillator functional form and optimise analytical parameters based on the experimental data. From the fitted results, we calculate the transition dipole moment matrix elements for transitions from the rovibrational levels of the coupled $\rm A^1Σ^+$-$\rm b^3Π_{0^+}$ state to the Feshbach state and the absolute rovibrational ground state for fermionic $^6$Li$^{87}$Rb molecule. Based on the calculated transition dipole moment matrix elements, several levels of the coupled $\rm A^1Σ^+$-$\rm b^3Π_{0^+}$ state are predicted to be suitable as the intermediate state for stimulated Raman adiabatic passage transfer from the Feshbach state to the absolute rovibrational ground state. In addition, we also provide a similar estimation for ${\rm B}^1Π$-${\rm c}^3Σ_1^+$-${\rm b}^3Π_1$ state based on available $ab\ initio$ interaction potentials. △ Less

Submitted 4 July, 2024; v1 submitted 18 June, 2024; originally announced June 2024.

Comments: 12 pages, 9 figures

Shape Measurement of Single Gold Nanorods in Water Using Open-access Optical Microcavities

Authors: Yumeng Yin, Aurelien Trichet, Jiangrui Qian, Jason Smith

Abstract: Shape measurement of rod-shaped particles in fluids is an outstanding challenge with applications in characterising synthetic functional nanoparticles and in early warning detection of rod-shaped pathogens in water supplies. However, it is challenging to achieve accurate and real-time measurements at a single particle scale in solution with existing methods. Here we introduce a novel technique to… ▽ More Shape measurement of rod-shaped particles in fluids is an outstanding challenge with applications in characterising synthetic functional nanoparticles and in early warning detection of rod-shaped pathogens in water supplies. However, it is challenging to achieve accurate and real-time measurements at a single particle scale in solution with existing methods. Here we introduce a novel technique to measure the aspect ratio of rod-shaped particles by analysing changes in the polarisation state of a laser beam transmitted through an optical microcavity through which the particle diffuses. The resolution in aspect ratio measurement is found to be around 1%. Our work opens the new possibility of in-situ and single-particle shape measurements, which have promising applications in nanoparticle characterisation, water monitoring, and beyond. △ Less

Submitted 13 May, 2024; originally announced May 2024.

Microwave seeding time crystal in Floquet driven Rydberg atoms

Authors: Bang Liu, Li-Hua Zhang, Yu Ma, Tian-Yu Han, Qi-Feng Wang, Jun Zhang, Zheng-Yuan Zhang, Shi-Yao Shao, Qing Li, Han-Chao Chen, Ya-Jun Wang, Jia-Dou Nan, Yi-Ming Yin, Dong-Sheng Ding, Bao-Sen Shi

Abstract: Crystal seeding enables a deeper understanding of phase behavior, leading to the development of methods for controlling and manipulating phase transitions in various applications such as materials synthesis, crystallization processes, and phase transformation engineering. How to seed a crystalline in time domain is an open question, which is of great significant and may provide an avenue to unders… ▽ More Crystal seeding enables a deeper understanding of phase behavior, leading to the development of methods for controlling and manipulating phase transitions in various applications such as materials synthesis, crystallization processes, and phase transformation engineering. How to seed a crystalline in time domain is an open question, which is of great significant and may provide an avenue to understand and control time-dependent quantum many-body physics. Here, we utilize a microwave pulse as a seed to induce the formation of a discrete time crystal in Floquet driven Rydberg atoms. In the experiment, the periodic driving on Rydberg states acts as a seeded crystalline order in subspace, which triggers the time-translation symmetry breaking across the entire ensemble. The behavior of the emergent time crystal is elaborately linked to alterations in the seed, such as the relative phase shift and the frequency difference, which result in phase dependent seeding and corresponding shift in periodicity of the time crystal, leading to embryonic synchronization. This result opens up new possibilities for studying and harnessing time-dependent quantum many-body phenomena, offering insights into the behavior of complex many-body systems under seeding. △ Less

Submitted 18 April, 2024; originally announced April 2024.

EL-MLFFs: Ensemble Learning of Machine Leaning Force Fields

Authors: Bangchen Yin, Yue Yin, Yuda W. Tang, Hai Xiao

Abstract: Machine learning force fields (MLFFs) have emerged as a promising approach to bridge the accuracy of quantum mechanical methods and the efficiency of classical force fields. However, the abundance of MLFF models and the challenge of accurately predicting atomic forces pose significant obstacles in their practical application. In this paper, we propose a novel ensemble learning framework, EL-MLFFs,… ▽ More Machine learning force fields (MLFFs) have emerged as a promising approach to bridge the accuracy of quantum mechanical methods and the efficiency of classical force fields. However, the abundance of MLFF models and the challenge of accurately predicting atomic forces pose significant obstacles in their practical application. In this paper, we propose a novel ensemble learning framework, EL-MLFFs, which leverages the stacking method to integrate predictions from diverse MLFFs and enhance force prediction accuracy. By constructing a graph representation of molecular structures and employing a graph neural network (GNN) as the meta-model, EL-MLFFs effectively captures atomic interactions and refines force predictions. We evaluate our approach on two distinct datasets: methane molecules and methanol adsorbed on a Cu(100) surface. The results demonstrate that EL-MLFFs significantly improves force prediction accuracy compared to individual MLFFs, with the ensemble of all eight models yielding the best performance. Moreover, our ablation study highlights the crucial roles of the residual network and graph attention layers in the model's architecture. The EL-MLFFs framework offers a promising solution to the challenges of model selection and force prediction accuracy in MLFFs, paving the way for more reliable and efficient molecular simulations. △ Less

Submitted 26 March, 2024; originally announced March 2024.

Comments: 12 pages, 3 figures

Influence of source parameters on the longitudinal phase-space distribution of a pulsed cryogenic beam of barium fluoride molecules

Authors: M C Mooij, H L Bethlem, A Boeschoten, A Borschevsky, K Esajas, T H Fikkers, S Hoekstra, J W F van Hofslot, K Jungmann, V R Marshall, T B Meijknecht, R G E Timmermans, A Touwen, W Ubachs, L Willmann, Y Yin.

Abstract: Recently, we have demonstrated a method to record the longitudinal phase-space distribution of a pulsed cryogenic buffer gas cooled beam of barium fluoride molecules. In this paper, we use this method to determine the influence of various source parameters. Besides the expected dependence on temperature and pressure, the forward velocity of the molecules is strongly correlated with the time they e… ▽ More Recently, we have demonstrated a method to record the longitudinal phase-space distribution of a pulsed cryogenic buffer gas cooled beam of barium fluoride molecules. In this paper, we use this method to determine the influence of various source parameters. Besides the expected dependence on temperature and pressure, the forward velocity of the molecules is strongly correlated with the time they exit the cell, revealing the dynamics of the gas inside the cell. Three observations are particularly noteworthy: (1) The velocity of the barium fluoride molecules increases rapidly as a function of time, reaches a maximum 50-200 $μ$s after the ablation pulse and then decreases exponentially. We attribute this to the buffer gas being heated up by the plume of hot atoms released from the target by the ablation pulse and subsequently being cooled down via conduction to the cell walls. (2) The time constant associated with the exponentially decreasing temperature increases when the source is used for a longer period of time, which we attribute to the formation of a layer of isolating dust on the walls of the cell. By thoroughly cleaning the cell, the time constant is reset to its initial value. (3) The velocity of the molecules at the trailing end of the molecular pulse depends on the length of the cell. For short cells, the velocity is significantly higher than expected from the sudden freeze model. We attribute this to the target remaining warm over the duration of the molecular pulse giving rise to a temperature gradient within the cell. Our observations will help to optimize the source parameters for producing the most intense molecular beam at the target velocity. △ Less

Submitted 29 January, 2024; originally announced January 2024.

Comments: 17 pages, 7 figures

Control water waves by metagratings

Authors: Linkang Han, Qilin Duan, Junliang Duan, Shan Zhu, Shiming Chen, Yuhang Yin, Huanyang Chen

Abstract: Metasurfaces and metagratings offers new platforms for electromagnetic wave control with significant responses. However, metasurfaces based on abrupt phase change and resonant structures suffer from the drawback of high loss and face challenges when applied in water waves. Therefore, the application of metasurfaces in water wave control is not ideal due to the limitations associated with high loss… ▽ More Metasurfaces and metagratings offers new platforms for electromagnetic wave control with significant responses. However, metasurfaces based on abrupt phase change and resonant structures suffer from the drawback of high loss and face challenges when applied in water waves. Therefore, the application of metasurfaces in water wave control is not ideal due to the limitations associated with high loss and other challenges. We have discovered that non-resonant metagratings exhibit promising effects in water wave control. Leveraging the similarity between bridges and metagratings, we have successfully developed a water wave metagrating model inspired by the Luoyang Bridge in ancient China. We conducted theoretical calculations and simulations on the metagrating and derived the equivalent anisotropic model of the metagrating. This model provides evidence that the metagrating has the capability to control water waves and achieve unidirectional surface water wave. The accuracy of our theory is strongly supported by the clear observation of the unidirectional propagation phenomenon during simulation and experiments conducted using a reduced version of the metagrating. It is the first time that the unidirectional propagation of water waves has been seen in water wave metagrating experiment. Above all, we realize the water wave metagrating experiment for the first time. By combining complex gratings with real bridges, we explore the physics embedded in the ancient building-Luoyang Bridge, which are of great significance for the water wave metagrating design, as well as the development and preservation of ancient bridges. △ Less

Submitted 27 November, 2023; originally announced November 2023.

Comments: 25 pages, 13 figures

PF-DMD: Physics-fusion dynamic mode decomposition for accurate and robust forecasting of dynamical systems with imperfect data and physics

Authors: Yuhui Yin, Chenhui Kou, Shengkun Jia, Lu Lu, Xigang Yuan, Yiqing Luo

Abstract: The DMD (Dynamic Mode Decomposition) method has attracted widespread attention as a representative modal-decomposition method and can build a predictive model. However, the DMD may give predicted results that deviate from physical reality in some scenarios, such as dealing with translation problems or noisy data. Therefore, this paper proposes a physics-fusion dynamic mode decomposition (PFDMD) me… ▽ More The DMD (Dynamic Mode Decomposition) method has attracted widespread attention as a representative modal-decomposition method and can build a predictive model. However, the DMD may give predicted results that deviate from physical reality in some scenarios, such as dealing with translation problems or noisy data. Therefore, this paper proposes a physics-fusion dynamic mode decomposition (PFDMD) method to address this issue. The proposed PFDMD method first obtains a data-driven model using DMD, then calculates the residual of the physical equations, and finally corrects the predicted results using Kalman filtering and gain coefficients. In this way, the PFDMD method can integrate the physics-informed equations with the data-driven model generated by DMD. Numerical experiments are conducted using the PFDMD, including the Allen-Cahn, advection-diffusion, and Burgers' equations. The results demonstrate that the proposed PFDMD method can significantly reduce the reconstruction and prediction errors by incorporating physics-informed equations, making it usable for translation and shock problems where the standard DMD method has failed. △ Less

Submitted 27 November, 2023; v1 submitted 27 November, 2023; originally announced November 2023.

Confining charged particles with time-varying magnetic fields: toward non-torus configuration of fusion plasmas

Authors: Shao-Wu Yao, Bo You, Yue-Hao Yin, Zhi-Yong Wu, Li-Xiang Cen

Abstract: We develop protocols to confine charged particles using time-varying magnetic fields and demonstrate the possible non-torus configuration resulting from the distribution of single-particle motion orbits. A two-step strategy is proposed to achieve this goal: preliminary protocols are contrived by solely considering the magnetic force; afterwards they are evaluated and selected through numerical sol… ▽ More We develop protocols to confine charged particles using time-varying magnetic fields and demonstrate the possible non-torus configuration resulting from the distribution of single-particle motion orbits. A two-step strategy is proposed to achieve this goal: preliminary protocols are contrived by solely considering the magnetic force; afterwards they are evaluated and selected through numerical solutions to the equation of motion, taking into account inductive electric fields. It is shown that a fine-tuned tangent-pulse protocol can maintain its centralized configuration even in the presence of associated electric fields, which illuminates an alternative approach to designing the confinement scenario for fusion plasmas. △ Less

Submitted 26 November, 2023; originally announced November 2023.

Comments: 5 pages, 3 figures

Experimental implementation of laser cooling of trapped ions in strongly inhomogeneous magnetic fields

Authors: Christian Mangeng, Yanning Yin, Richard Karl, Stefan Willitsch

Abstract: We demonstrate the Doppler laser cooling of $^{40}$Ca$^+$ ions confined in a segmented linear Paul trap in the presence of a strong quadrupolar magnetic field generated by two permanent ring magnets. Magnetic field gradients of 800 to 1600 G/mm give rise to a highly position-dependent Zeeman shift on the energy levels of the trapped ions. Efficient laser cooling is demonstrated using two 397 nm co… ▽ More We demonstrate the Doppler laser cooling of $^{40}$Ca$^+$ ions confined in a segmented linear Paul trap in the presence of a strong quadrupolar magnetic field generated by two permanent ring magnets. Magnetic field gradients of 800 to 1600 G/mm give rise to a highly position-dependent Zeeman shift on the energy levels of the trapped ions. Efficient laser cooling is demonstrated using two 397 nm cooling laser beams with appropriate wavelengths and polarizations and one 866 nm repumper laser beam. Coulomb crystals of ions are found to exhibit similar secular temperatures to those trapped in absence of the magnetic field. In addition, the position dependency of the Zeeman effect is used to generate a map of the field strength. This work forms the basis for developing hybrid trapping experiments for cold ions and neutral molecules that consist of an ion and a magnetic trap to study cold interactions between these species, and opens up new possibilities for quantum-science experiments that employ trapped ions in inhomogeneous magnetic fields. △ Less

Submitted 6 September, 2023; originally announced September 2023.

Comments: 7 pages, 7 figures

INFINITY: Neural Field Modeling for Reynolds-Averaged Navier-Stokes Equations

Authors: Louis Serrano, Leon Migus, Yuan Yin, Jocelyn Ahmed Mazari, Patrick Gallinari

Abstract: For numerical design, the development of efficient and accurate surrogate models is paramount. They allow us to approximate complex physical phenomena, thereby reducing the computational burden of direct numerical simulations. We propose INFINITY, a deep learning model that utilizes implicit neural representations (INRs) to address this challenge. Our framework encodes geometric information and ph… ▽ More For numerical design, the development of efficient and accurate surrogate models is paramount. They allow us to approximate complex physical phenomena, thereby reducing the computational burden of direct numerical simulations. We propose INFINITY, a deep learning model that utilizes implicit neural representations (INRs) to address this challenge. Our framework encodes geometric information and physical fields into compact representations and learns a mapping between them to infer the physical fields. We use an airfoil design optimization problem as an example task and we evaluate our approach on the challenging AirfRANS dataset, which closely resembles real-world industrial use-cases. The experimental results demonstrate that our framework achieves state-of-the-art performance by accurately inferring physical fields throughout the volume and surface. Additionally we demonstrate its applicability in contexts such as design exploration and shape optimization: our model can correctly predict drag and lift coefficients while adhering to the equations. △ Less

Submitted 25 July, 2023; originally announced July 2023.

Comments: ICML 2023 Workshop on Synergy of Scientific and Machine Learning Modeling

Journal ref: ICML 2023 Workshop on Synergy of Scientific and Machine Learning Modeling

Electrically Controlled Reversible Strain Modulation in MoS$_2$ Field-effect Transistors via an Electro-mechanically Coupled Piezoelectric Thin Film

Authors: Abin Varghese, Adityanarayan Pandey, Pooja Sharma, Yuefeng Yin, Nikhil Medhekar, Saurabh Lodha

Abstract: Strain can efficiently modulate the bandgap and carrier mobilities in two-dimensional (2D) materials. Conventional mechanical strain-application methodologies that rely on flexible, patterned or nano-indented substrates are severely limited by low thermal tolerance, lack of tunability and/or poor scalability. Here, we leverage the converse piezoelectric effect to electrically generate and control… ▽ More Strain can efficiently modulate the bandgap and carrier mobilities in two-dimensional (2D) materials. Conventional mechanical strain-application methodologies that rely on flexible, patterned or nano-indented substrates are severely limited by low thermal tolerance, lack of tunability and/or poor scalability. Here, we leverage the converse piezoelectric effect to electrically generate and control strain transfer from a piezoelectric thin film to electro-mechanically coupled ultra-thin 2D MoS$_2$. Electrical bias polarity change across the piezoelectric film tunes the nature of strain transferred to MoS$_2$ from compressive $\sim$0.23% to tensile $\sim$0.14% as verified through peak shifts in Raman and photoluminescence spectroscopies and substantiated by density functional theory calculations. The device architecture, built on a silicon substrate, uniquely integrates an MoS$_2$ field-effect transistor on top of a metal-piezoelectric-metal stack enabling strain modulation of transistor drain current 130$\times$, on/off current ratio 150$\times$, and mobility 1.19$\times$ with high precision, reversibility and resolution. Large, tunable tensile (1056) and compressive (-1498) strain gauge factors, easy electrical strain modulation, high thermal tolerance and substrate compatibility make this technique promising for integration with silicon-based CMOS and micro-electro-mechanical systems. △ Less

Submitted 25 April, 2023; originally announced April 2023.

Comments: Manuscript and Supplementary Information

Laser Cooling of Trapped Ions in Strongly Inhomogeneous Magnetic Fields

Authors: Richard Karl, Yanning Yin, Stefan Willitsch

Abstract: Hybrid traps for the simultaneous confinement of neutrals and ions have recently emerged as versatile tools for studying interactions between these species at very low temperatures. Such traps rely on the combination of different types of external fields for the confinement of either species raising the question of interactions between the individual traps. Here, the influence of a strongly inhomo… ▽ More Hybrid traps for the simultaneous confinement of neutrals and ions have recently emerged as versatile tools for studying interactions between these species at very low temperatures. Such traps rely on the combination of different types of external fields for the confinement of either species raising the question of interactions between the individual traps. Here, the influence of a strongly inhomogeneous magnetic field used for trapping neutrals on the trapping and laser cooling of a single Ca$^+$ ion in a radiofrequency ion trap is studied theoretically using molecular-dynamics simulations based on multilevel rate equations. The inhomogeneous magnetic field couples the different components of the ion motion and introduces position-dependent Zeeman splittings. Nonetheless, laser cooling is still found to work efficiently as the ion samples different magnetic field strengths and directions along its trajectory. Offsetting the centres of the two traps generates a linear magnetic-field gradient so that multiple lasers are required to address the resulting range of Zeeman splittings in order to ensure efficient cooling. The present study yields detailed insights into the ion cooling dynamics in combined magnetic and radiofrequency electric fields relevant for the characterisation and optimisation of hybrid trapping experiments. △ Less

Submitted 22 December, 2022; originally announced December 2022.

Ultra-Low Temperature Li/CFx Batteries Enabled by Fast-transport and Anion-pairing Liquefied Gas Electrolytes

Authors: Yijie Yin, John Holoubek, Alex Liu, Baharak Sayahpour, Ganesh Raghavendran, Guorui Cai, Bing Han, Matthew Mayer, Noah B. Schorr, Timothy N. Lambert, Katharine L. Harrison, Weikang Li, Zheng Chen, Y. Shirley Meng

Abstract: Lithium fluorinated carbon is one of the most promising chemistries for high-energy-density primary energy storage systems in applications where rechargeability is not required. Though Li/CFx demonstrates high energy density under ambient conditions, achieving such a high energy density when exposed to subzero temperatures remains a challenge, particularly under high current density. Here, we repo… ▽ More Lithium fluorinated carbon is one of the most promising chemistries for high-energy-density primary energy storage systems in applications where rechargeability is not required. Though Li/CFx demonstrates high energy density under ambient conditions, achieving such a high energy density when exposed to subzero temperatures remains a challenge, particularly under high current density. Here, we report a liquefied gas electrolyte with an anion-pair solvation structure based on dimethyl ether with a low melting point and low viscosity, leading to high ionic conductivity between a wide temperature range. Besides that, through systematic X-ray photoelectron spectroscopy integrated with transmission electron microscopy characterizations, we evaluate the interface of CFx for low-temperature performance. We conclude that the fast transport and anion-pairing solvation structure of the electrolyte bring about reduced charge transfer resistance at low temperatures, which resulted in significantly enhanced performance of Li/CFx cells. Utilizing 50 mg/cm2 loading electrodes, the Li/CFx still displayed 1530 Wh/kg at reduced temperature. This work provides insights into the electrolyte design that may overcome the operational limits of batteries in extreme environments. △ Less

Submitted 1 September, 2022; originally announced September 2022.

Minkowski's lost legacy and hadron electromagnetism

Authors: Yang Li, Wen-bo Dong, Yi-liang Yin, Qun Wang, James P. Vary

Abstract: We revisit Minkowski's lost legacy on relativistic electromagnetism in order to resolve long-standing puzzles over the charge distribution of relativistic systems like hadrons. Hadrons are unique relativistic electromagnetic systems characterized by their comparable size and Compton wavelength $r_h \sim λ_C$. As such, it was recently realized that the traditional Sachs definition of the charge dis… ▽ More We revisit Minkowski's lost legacy on relativistic electromagnetism in order to resolve long-standing puzzles over the charge distribution of relativistic systems like hadrons. Hadrons are unique relativistic electromagnetic systems characterized by their comparable size and Compton wavelength $r_h \sim λ_C$. As such, it was recently realized that the traditional Sachs definition of the charge distribution based on a non-relativistic formula is invalid. We explain that this is the same problem pursued by Lorentz, Einstein and others, on the electromagnetism of a moving body. We show how various charge distributions proposed in hadronic physics naturally emerge as the multipole moment densities in the macroscopic theory of relativistic electromagnetism. △ Less

Submitted 21 January, 2023; v1 submitted 26 June, 2022; originally announced June 2022.

Comments: 7 pages, 2 figures; published on Physics Letters B

Journal ref: Phys. Lett. B 838, 137676 (2023)

Experimental Observation of Berry Phases in Optical Moebius-strip Microcavities

Authors: Jiawei Wang, Sreeramulu Valligatla, Yin Yin, Lukas Schwarz, Mariana Medina-Sanchez, Stefan Baunack, Ching Hua Lee, Ronny Thomale, Shilong Li, Vladimir M. Fomin, Libo Ma, Oliver G. Schmidt

Abstract: The Moebius strip, as a fascinating loop structure with one-sided topology, provides a rich playground for manipulating the non-trivial topological behavior of spinning particles, such as electrons, polaritons, and photons in both real and parameter spaces. For photons resonating in a Moebius-strip cavity, the occurrence of an extra phase, known as Berry phase, with purely topological origin is ex… ▽ More The Moebius strip, as a fascinating loop structure with one-sided topology, provides a rich playground for manipulating the non-trivial topological behavior of spinning particles, such as electrons, polaritons, and photons in both real and parameter spaces. For photons resonating in a Moebius-strip cavity, the occurrence of an extra phase, known as Berry phase, with purely topological origin is expected due to its non-trivial evolution in the parameter space. However, despite numerous theoretical investigations, characterizing optical Berry phase in a Moebius-strip cavity has remained elusive. Here we report the experimental observation of Berry phase generated in optical Moebius-strip microcavities. In contrast to theoretical predictions in optical, electronic, and magnetic Moebius-topology systems where only Berry phase π occurs, we demonstrate that variable Berry phase smaller than π can be acquired by generating elliptical polarization of resonating light. Moebius-strip microcavities as integrable and Berry-phase-programmable optical systems are of great interest in topological physics and emerging classical or quantum photonic applications. △ Less

Submitted 14 October, 2022; v1 submitted 9 June, 2022; originally announced June 2022.

An iterative data-driven turbulence modeling framework based on Reynolds stress representation

Authors: Yuhui Yin, Yufei Zhang, Haixin Chen, Song Fu

Abstract: Data-driven turbulence modeling studies have reached such a stage that the fundamental framework is basically settled, but several essential issues remain that strongly affect the performance, including accuracy, smoothness, and generalization capacity. Two problems are studied in the current research: (1) the processing of the Reynolds stress tensor and (2) the coupling method between the machine… ▽ More Data-driven turbulence modeling studies have reached such a stage that the fundamental framework is basically settled, but several essential issues remain that strongly affect the performance, including accuracy, smoothness, and generalization capacity. Two problems are studied in the current research: (1) the processing of the Reynolds stress tensor and (2) the coupling method between the machine learning turbulence model and flow solver. The first determines the form of predicting targets and the resulting physical completeness and interpretability. The second determines the training process and intrinsic relevance between the mean flow features and Reynolds stress. For the Reynolds stress processing issue, we perform the theoretical derivation to extend the relevant tensor arguments of Reynolds stress in addition to the strain rate and rotation rate. Then, the tensor representation theorem is employed to give the complete irreducible invariants and integrity basis. In addition, an adaptive regularization term is employed to enhance the representation performance. For the coupling issue, an iterative coupling data-driven turbulence modeling framework with consistent convergence is proposed. The training data preparation, predicting target selection, and computation platform are illustrated. The framework is then applied to a canonical separated flow for verification. The mean flow results obtained by coupling computation of the trained machine learning model and flow solver have high consistency with the direct numerical simulation true values, which proves the validity of the current approach. △ Less

Submitted 20 August, 2022; v1 submitted 16 April, 2022; originally announced April 2022.

Journal ref: Theoretical and Applied Mechanics Letters 2022

SerialTrack: ScalE and Rotation Invariant Augmented Lagrangian Particle Tracking

Authors: Jin Yang, Yue Yin, Alexander K. Landauer, Selda Buyuktozturk, Jing Zhang, Luke Summey, Alexander McGhee, Matt K. Fu, John O. Dabiri, Christian Franck

Abstract: We present a new particle tracking algorithm to accurately resolve large deformation and rotational motion fields, which takes advantage of both local and global particle tracking algorithms. We call this method the ScalE and Rotation Invariant Augmented Lagrangian Particle Tracking (SerialTrack). This method builds an iterative scale and rotation invariant topology-based feature for each particle… ▽ More We present a new particle tracking algorithm to accurately resolve large deformation and rotational motion fields, which takes advantage of both local and global particle tracking algorithms. We call this method the ScalE and Rotation Invariant Augmented Lagrangian Particle Tracking (SerialTrack). This method builds an iterative scale and rotation invariant topology-based feature for each particle within a multi-scale tracking algorithm. The global kinematic compatibility condition is applied as a global augmented Lagrangian constraint to enhance the tracking accuracy. An open source software package implementing this numerical approach to track both 2D and 3D, incremental and cumulative deformation fields is provided. △ Less

Submitted 23 March, 2022; originally announced March 2022.

Benchmarking of the Fock space coupled cluster method and uncertainty estimation: Magnetic hyperfine interaction in the excited state of BaF

Authors: Malika Denis, Pi A. B. Haase, Maarten C. Mooij, Yuly Chamorro, Parul Aggarwal, Hendrick L. Bethlem, Alexander Boeschoten, Anastasia Borschevsky, Kevin Esajas, Yongliang Hao, Steven Hoekstra, Joost W. F. van Hofslot, Virginia R. Marshall, Thomas B. Meijknecht, RobG. E. Timmermans, Anno Touwen, Wim Ubachs, Lorenz Willmann, Yanning Yin

Abstract: We present an investigation of the performance of the relativistic multi-reference Fock-space coupled cluster (FSCC) method for predicting molecular hyperfine structure (HFS) constants, including a thorough computational study to estimate the associated uncertainties. In particular, we considered the $^{19}$F HFS constant in the ground and excited states of BaF. Due to a larger basis set dependenc… ▽ More We present an investigation of the performance of the relativistic multi-reference Fock-space coupled cluster (FSCC) method for predicting molecular hyperfine structure (HFS) constants, including a thorough computational study to estimate the associated uncertainties. In particular, we considered the $^{19}$F HFS constant in the ground and excited states of BaF. Due to a larger basis set dependence, the uncertainties on the excited state results (16-85%) were found to be significantly larger than those on the ground state constants ($\sim$2%). The ab initio values were compared to the recent experimental results, and good overall agreement within the theoretical uncertainties was found. This work demonstrates the predictive power of the FSCC method and the reliability of the established uncertainty estimates, which can be crucial in cases where the calculated property cannot be directly compared to experiment. △ Less

Submitted 21 January, 2022; originally announced January 2022.

Insights into Cold Source MOSFETs with Sub-60 mV/decade and Negative Differential Resistance Effect

Authors: Yiheng Yin, Zhaofu Zhang, Chen Shao, John Robertson, Yuzheng Guo

Abstract: To extend the Moores law in the 5 nm node, a large number of two dimensional (2D) materials and devices have been thoroughly researched, among which the cold metals 2H MS2 (M = Nb, Ta) with unique band structures are expected to achieve the sub-60 mV/dec subthreshold swing (SS). The studied cold metal field-effect transistors (CM-FETs) based on the cold metals are capable to fulfill the high-perfo… ▽ More To extend the Moores law in the 5 nm node, a large number of two dimensional (2D) materials and devices have been thoroughly researched, among which the cold metals 2H MS2 (M = Nb, Ta) with unique band structures are expected to achieve the sub-60 mV/dec subthreshold swing (SS). The studied cold metal field-effect transistors (CM-FETs) based on the cold metals are capable to fulfill the high-performance (HP) and low-dissipation (LP) goals simultaneously, as required by the International Technology Roadmap for Semiconductors (ITRS). Moreover, gaps of cold metals also enable the CM-FETs to realize negative differential resistance (NDR) effect. Owing to the wide transmission path in the broken gap structure of NbS2/MoS2 heterojunction, the recording 4110 A/m peak current, several orders of magnitude higher than the tunneling current of the Esaki diode, is achieved by NbS2/MoS2 CM-FET. The largest peak-valley ratio (PVR) is obtained by TaS2/MoS2 CM-FET with VGS = -1V at room temperature. Our results claim that the superior on-state current, SS, cut-off frequency and NDR effect can be obtained by CM-FETs simultaneously. The study of CM-FETs provides a practicable solution for state-of-the-art logic device in sub 5 nm node for both more Moore roadmap and more than Moore roadmap applications. △ Less

Submitted 5 December, 2021; originally announced December 2021.

Loss of New Ideas: Potentially Long-lasting Effects of the Pandemic on Scientists

Authors: Jian Gao, Yian Yin, Kyle R. Myers, Karim R. Lakhani, Dashun Wang

Abstract: Extensive research has documented the immediate impacts of the COVID-19 pandemic on scientists, yet it remains unclear if and how such impacts have shifted over time. Here we compare results from two surveys of principal investigators, conducted between April 2020 and January 2021, along with analyses of large-scale publication data. We find that there has been a clear sign of recovery in some reg… ▽ More Extensive research has documented the immediate impacts of the COVID-19 pandemic on scientists, yet it remains unclear if and how such impacts have shifted over time. Here we compare results from two surveys of principal investigators, conducted between April 2020 and January 2021, along with analyses of large-scale publication data. We find that there has been a clear sign of recovery in some regards, as scientists' time spent on their work has almost returned to pre-pandemic levels. However, the latest data also reveals a new dimension in which the pandemic is affecting the scientific workforce: the rate of initiating new research projects. Except for the small fraction of scientists who directly engaged in COVID-related research, most scientists started significantly fewer new research projects in 2020. This decline is most pronounced amongst the same demographic groups of scientists who reported the largest initial disruptions: female scientists and those with young children. Yet in sharp contrast to the earlier phase of the pandemic, when there were large disparities across scientific fields, this loss of new projects appears remarkably homogeneous across fields. Analyses of large-scale publication data reveal a global decline in the rate of new collaborations, especially in non-COVID-related preprints, which is consistent with the reported decline in new projects. Overall, these findings highlight that, while the end of the pandemic may appear in sight in some countries, its large and unequal impact on the scientific workforce may be enduring, which may have broad implications for inequality and the long-term vitality of science. △ Less

Submitted 20 July, 2021; originally announced July 2021.

Comments: 14 pages, 2 figures, with supplementary information

Adaptability and the Pivot Penalty in Science

Authors: Ryan Hill, Yian Yin, Carolyn Stein, Dashun Wang, Benjamin F. Jones

Abstract: The ability to confront new questions, opportunities, and challenges is of fundamental importance to human progress and the resilience of human societies, yet the capacity of science to meet new demands remains poorly understood. Here we deploy a new measurement framework to investigate the scientific response to the COVID-19 pandemic and the adaptability of science as a whole. We find that scienc… ▽ More The ability to confront new questions, opportunities, and challenges is of fundamental importance to human progress and the resilience of human societies, yet the capacity of science to meet new demands remains poorly understood. Here we deploy a new measurement framework to investigate the scientific response to the COVID-19 pandemic and the adaptability of science as a whole. We find that science rapidly shifted to engage COVID-19 following the advent of the virus, with scientists across all fields making large jumps from their prior research streams. However, this adaptive response reveals a pervasive "pivot penalty", where the impact of the new research steeply declines the further the scientists move from their prior work. The pivot penalty is severe amidst COVID-19 research, but it is not unique to COVID-19. Rather it applies nearly universally across the sciences, and has been growing in magnitude over the past five decades. While further features condition pivoting, including a scientist's career stage, prior expertise and impact, collaborative scale, the use of new coauthors, and funding, we find that the pivot penalty persists and remains substantial regardless of these features, suggesting the pivot penalty acts as a fundamental friction that governs science's ability to adapt. The pivot penalty not only holds key implications for the design of the scientific system and human capacity to confront emergent challenges through scientific advance, but may also be relevant to other social and economic systems, where shifting to meet new demands is central to survival and success. △ Less

Submitted 13 July, 2021; originally announced July 2021.

Seismic Inverse Modeling Method based on Generative Adversarial Network

Authors: Pengfei Xie, YanShu Yin, JiaGen Hou, Mei Chen, Lixin Wang

Abstract: Seismic inverse modeling is a common method in reservoir prediction and it plays a vital role in the exploration and development of oil and gas. Conventional seismic inversion method is difficult to combine with complicated and abstract knowledge on geological mode and its uncertainty is difficult to be assessed. The paper proposes an inversion modeling method based on GAN consistent with geology,… ▽ More Seismic inverse modeling is a common method in reservoir prediction and it plays a vital role in the exploration and development of oil and gas. Conventional seismic inversion method is difficult to combine with complicated and abstract knowledge on geological mode and its uncertainty is difficult to be assessed. The paper proposes an inversion modeling method based on GAN consistent with geology, well logs, seismic data. GAN is a the most promising generation model algorithm that extracts spatial structure and abstract features of training images. The trained GAN can reproduce the models with specific mode. In our test, 1000 models were generated in 1 second. Based on the trained GAN after assessment, the optimal result of models can be calculated through Bayesian inversion frame. Results show that inversion models conform to observation data and have a low uncertainty under the premise of fast generation. This seismic inverse modeling method increases the efficiency and quality of inversion iteration. It is worthy of studying and applying in fusion of seismic data and geological knowledge. △ Less

Submitted 8 June, 2021; originally announced June 2021.

Comments: 22 pages,13 figures

MSC Class: 86-08 ACM Class: I.1.5

Systematic study and uncertainty evaluation of $P,T$-odd molecular enhancement factors in BaF

Authors: Pi A. B. Haase, Diewertje J. Doeglas, Alexander Boeschoten, Ephraim Eliav, Miroslav Iliaš, Parul Aggarwal, Hendrick L. Bethlem, Anastasia Borschevsky, Kevin Esajas, Yongliang Hao, Steven Hoekstra, Virginia R. Marshall, Thomas B. Meijknecht, Maarten C. Mooij, Kees Steinebach, Rob G. E. Timmermans, Anno Touwen, Wim Ubachs, Lorenz Willmann, Yanning Yin

Abstract: A measurement of the magnitude of the electric dipole moment of the electron (eEDM) larger than that predicted by the Standard Model (SM) of particle physics is expected to have a huge impact on the search for physics beyond the SM. Polar diatomic molecules containing heavy elements experience enhanced sensitivity to parity ($P$) and time-reversal ($T$)-violating phenomena, such as the eEDM and th… ▽ More A measurement of the magnitude of the electric dipole moment of the electron (eEDM) larger than that predicted by the Standard Model (SM) of particle physics is expected to have a huge impact on the search for physics beyond the SM. Polar diatomic molecules containing heavy elements experience enhanced sensitivity to parity ($P$) and time-reversal ($T$)-violating phenomena, such as the eEDM and the scalar-pseudoscalar (S-PS) interaction between the nucleons and the electrons, and are thus promising candidates for measurements. The NL-\textit{e}EDM collaboration is preparing an experiment to measure the eEDM and S-PS interaction in a slow beam of cold BaF molecules [Eur. Phys. J. D, 72, 197 (2018)]. Accurate knowledge of the electronic structure parameters, $W_d$ and $W_s$, connecting the eEDM and the S-PS interaction to the measurable energy shifts is crucial for the interpretation of these measurements. In this work we use the finite field relativistic coupled cluster approach to calculate the $W_d$ and $W_s$ parameters in the ground state of the BaF molecule. Special attention was paid to providing a reliable theoretical uncertainty estimate based on investigations of the basis set, electron correlation, relativistic effects and geometry. Our recommended values of the two parameters, including conservative uncertainty estimates, are 3.13 $\pm$ $0.12 \times 10^{24}\frac{\text{Hz}}{e\cdot \text{cm}}$ for $W_d$ and 8.29 $\pm$ 0.12 kHz for $W_s$. △ Less

Submitted 3 May, 2021; originally announced May 2021.

Science as a Public Good: Public Use and Funding of Science

Authors: Yian Yin, Yuxiao Dong, Kuansan Wang, Dashun Wang, Benjamin F. Jones

Abstract: Knowledge of how science is consumed in public domains is essential for a deeper understanding of the role of science in human society. While science is heavily supported by public funding, common depictions suggest that scientific research remains an isolated or 'ivory tower' activity, with weak connectivity to public use, little relationship between the quality of research and its public use, an… ▽ More Knowledge of how science is consumed in public domains is essential for a deeper understanding of the role of science in human society. While science is heavily supported by public funding, common depictions suggest that scientific research remains an isolated or 'ivory tower' activity, with weak connectivity to public use, little relationship between the quality of research and its public use, and little correspondence between the funding of science and its public use. This paper introduces a measurement framework to examine public good features of science, allowing us to study public uses of science, the public funding of science, and how use and funding relate. Specifically, we integrate five large-scale datasets that link scientific publications from all scientific fields to their upstream funding support and downstream public uses across three public domains - government documents, the news media, and marketplace invention. We find that the public uses of science are extremely diverse, with different public domains drawing distinctively across scientific fields. Yet amidst these differences, we find key forms of alignment in the interface between science and society. First, despite concerns that the public does not engage high-quality science, we find universal alignment, in each scientific field and public domain, between what the public consumes and what is highly impactful within science. Second, despite myriad factors underpinning the public funding of science, the resulting allocation across fields presents a striking alignment with the field's collective public use. Overall, public uses of science present a rich landscape of specialized consumption, yet collectively science and society interface with remarkable, quantifiable alignment between scientific use, public use, and funding. △ Less

Submitted 30 April, 2021; originally announced May 2021.

Deceleration and trapping of SrF molecules

Authors: NL-eEDM collaboration, :, P. Aggarwal, Y. Yin, K. Esajas, H. L. Bethlem, A. Boeschoten, A. Borschevsky, S. Hoekstra, K. Jungmann, V. R. Marshall, T. B. Meijknecht, M. C. Mooij, R. G. E. Timmermans, A. Touwen, W. Ubachs, L. Willmann

Abstract: We report on the electrostatic trapping of neutral SrF molecules. The molecules are captured from a cryogenic buffer-gas beam source into the moving traps of a 4.5 m long traveling-wave Stark decelerator. The SrF molecules in $X^2Σ^+(v=0, N=1)$ state are brought to rest as the velocity of the moving traps is gradually reduced from 190 m/s to zero. The molecules are held for up to 50 ms in multiple… ▽ More We report on the electrostatic trapping of neutral SrF molecules. The molecules are captured from a cryogenic buffer-gas beam source into the moving traps of a 4.5 m long traveling-wave Stark decelerator. The SrF molecules in $X^2Σ^+(v=0, N=1)$ state are brought to rest as the velocity of the moving traps is gradually reduced from 190 m/s to zero. The molecules are held for up to 50 ms in multiple electric traps of the decelerator. The trapped packets have a volume (FWHM) of 1 mm$^{3}$ and a velocity spread of 5(1) m/s which corresponds to a temperature of $60(20)$ mK. Our result demonstrates a factor 3 increase in the molecular mass that has been Stark-decelerated and trapped. Heavy molecules (mass$>$100 amu) offer a highly increased sensitivity to probe physics beyond the Standard Model. This work significantly extends the species of neutral molecules of which slow beams can be created for collision studies, precision measurement and trapping experiments. △ Less

Submitted 14 March, 2021; originally announced March 2021.

Journal ref: Phys. Rev. Lett. 127, 173201 (2021)

Diffusion-weighted MRI-guided needle biopsies permit quantitative tumor heterogeneity assessment and cell load estimation

Authors: Yi Yin, Kai Breuhahn, Hans-Ulrich Kauczor, Oliver Sedlaczek, Irene E. Vignon-Clementel, Dirk Drasdo

Abstract: Quantitative information on tumor heterogeneity and cell load could assist in designing effective and refined personalized treatment strategies. It was recently shown by us that such information can be inferred from the diffusion parameter D derived from the diffusion-weighted MRI (DWI) if a relation between D and cell density can be established. However, such relation cannot a priori be assumed t… ▽ More Quantitative information on tumor heterogeneity and cell load could assist in designing effective and refined personalized treatment strategies. It was recently shown by us that such information can be inferred from the diffusion parameter D derived from the diffusion-weighted MRI (DWI) if a relation between D and cell density can be established. However, such relation cannot a priori be assumed to be constant for all patients and tumor types. Hence to assist in clinical decisions in palliative settings, the relation needs to be established without tumor resection. It is here demonstrated that biopsies may contain sufficient information for this purpose if the localization of biopsies is chosen as systematically elaborated in this paper. A superpixel-based method for automated optimal localization of biopsies from the DWI D-map is proposed. The performance of the DWI-guided procedure is evaluated by extensive simulations of biopsies. Needle biopsies yield sufficient histological information to establish a quantitative relationship between D-value and cell density, provided they are taken from regions with high, intermediate, and low D-value in DWI. The automated localization of the biopsy regions is demonstrated from a NSCLC patient tumor. In this case, even two or three biopsies give a reasonable estimate. Simulations of needle biopsies under different conditions indicate that the DWI-guidance highly improves the estimation results. Tumor cellularity and heterogeneity in solid tumors may be reliably investigated from DWI and a few needle biopsies that are sampled in regions of well-separated D-values, excluding adipose tissue. This procedure could provide a way of embedding in the clinical workflow assistance in cancer diagnosis and treatment based on personalized information. △ Less

Submitted 28 February, 2021; originally announced March 2021.

Computationally Efficient Multiscale Neural Networks Applied To Fluid Flow In Complex 3D Porous Media

Authors: Javier Santos, Ying Yin, Honggeun Jo, Wen Pan, Qinjun Kang, Hari Viswanathan, Masa Prodanovic, Michael Pyrcz, Nicholas Lubbers

Abstract: The permeability of complex porous materials can be obtained via direct flow simulation, which provides the most accurate results, but is very computationally expensive. In particular, the simulation convergence time scales poorly as simulation domains become tighter or more heterogeneous. Semi-analytical models that rely on averaged structural properties (i.e. porosity and tortuosity) have been p… ▽ More The permeability of complex porous materials can be obtained via direct flow simulation, which provides the most accurate results, but is very computationally expensive. In particular, the simulation convergence time scales poorly as simulation domains become tighter or more heterogeneous. Semi-analytical models that rely on averaged structural properties (i.e. porosity and tortuosity) have been proposed, but these features only summarize the domain, resulting in limited applicability. On the other hand, data-driven machine learning approaches have shown great promise for building more general models by virtue of accounting for the spatial arrangement of the domains solid boundaries. However, prior approaches building on the Convolutional Neural Network (ConvNet) literature concerning 2D image recognition problems do not scale well to the large 3D domains required to obtain a Representative Elementary Volume (REV). As such, most prior work focused on homogeneous samples, where a small REV entails that that the global nature of fluid flow could be mostly neglected, and accordingly, the memory bottleneck of addressing 3D domains with ConvNets was side-stepped. Therefore, important geometries such as fractures and vuggy domains could not be well-modeled. In this work, we address this limitation with a general multiscale deep learning model that is able to learn from porous media simulation data. By using a coupled set of neural networks that view the domain on different scales, we enable the evaluation of large images in approximately one second on a single Graphics Processing Unit. This model architecture opens up the possibility of modeling domain sizes that would not be feasible using traditional direct simulation tools on a desktop computer. △ Less

Submitted 10 February, 2021; originally announced February 2021.

Protein corona critically affects the bio-behaviors of SARS-CoV-2

Authors: Yue-wen Yin, Yan-jing Sheng, Min Wang, Song-di Ni, Hong-ming Ding, Yu-qiang Ma

Abstract: The outbreak of the coronavirus disease 2019 (COVID-19) caused by severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) has become a worldwide public health crisis. When the SARS-CoV-2 enters the biological fluids in the human body, different types of biomolecules (in particular proteins) may adsorb on its surface and alter its infection ability. Although great efforts have recently been de… ▽ More The outbreak of the coronavirus disease 2019 (COVID-19) caused by severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) has become a worldwide public health crisis. When the SARS-CoV-2 enters the biological fluids in the human body, different types of biomolecules (in particular proteins) may adsorb on its surface and alter its infection ability. Although great efforts have recently been devoted to the interaction of the specific antibodies with the SARS-CoV-2, it still remains largely unknown how the other serum proteins affect the infection of the SARS-CoV-2. In this work, we systematically investigate the interaction of serum proteins with the SARS-CoV-2 RBD by the molecular docking and the all-atom molecular dynamics simulations. It is found that the non-specific immunoglobulin (Ig) indeed cannot effectively bind to the SARS-CoV-2 RBD while the human serum albumin (HSA) may have some potential of blocking its infection (to ACE2). More importantly, we find that the RBD can cause the significant structural change of the Apolipoprotein E (ApoE), by which SARS-CoV-2 may hijack the metabolic pathway of the ApoE to facilitate its cell entry. The present study enhances the understanding of the role of protein corona in the bio-behaviors of SARS-CoV-2, which may aid the more precise and personalized treatment for COVID-19 infection in the clinic. △ Less

Submitted 10 February, 2021; originally announced February 2021.

Comments: 18 pages, 7 figures

Accurate Evaluation on the Interactions of SARS-CoV-2 with Its Receptor ACE2 and Antibodies CR3022/CB6

Authors: Hong-ming Ding, Yue-wen Yin, Song-di Ni, Yan-jing Sheng, Yu-qiang Ma

Abstract: The spread of the coronavirus disease 2019 (COVID-19) caused by severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) has become a global health crisis. The binding affinity of SARS-CoV-2 (in particular the receptor binding domain, RBD) to its receptor angiotensin converting enzyme 2 (ACE2) and the antibodies is of great importance in understanding the infectivity of COVID-19 and evaluating… ▽ More The spread of the coronavirus disease 2019 (COVID-19) caused by severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) has become a global health crisis. The binding affinity of SARS-CoV-2 (in particular the receptor binding domain, RBD) to its receptor angiotensin converting enzyme 2 (ACE2) and the antibodies is of great importance in understanding the infectivity of COVID-19 and evaluating the candidate therapeutic for COVID-19. In this work, we propose a new method based on molecular mechanics/Poisson-Boltzmann surface area (MM/PBSA) to accurately calculate the free energy of SARS-CoV-2 RBD binding to ACE2 and antibodies. The calculated binding free energy of SARS-CoV-2 RBD to ACE2 is -13.3 kcal/mol, and that of SARS-CoV RBD to ACE2 is -11.4 kcal/mol, which agrees well with experimental result (-11.3 kcal/mol and -10.1 kcal/mol, respectively). Moreover, we take two recently reported antibodies as the example, and calculate the free energy of antibodies binding to SARS-CoV-2 RBD, which is also consistent with the experimental findings. Further, within the framework of the modified MM/PBSA, we determine the key residues and the main driving forces for the SARS-CoV-2 RBD/CB6 interaction by the computational alanine scanning method. The present study offers a computationally efficient and numerically reliable method to evaluate the free energy of SARS-CoV-2 binding to other proteins, which may stimulate the development of the therapeutics against the COVID-19 disease in real applications. △ Less

Submitted 17 January, 2021; originally announced February 2021.

Comments: 18 pages, 5 figures

Journal ref: CHIN.PHYS.LETT. Vol.38, No.1(2021)018701 Express Letter

Feature selection and processing of turbulence modeling based on an artificial neural network

Authors: Yuhui Yin, Pu Yang, Yufei Zhang, Haixin Chen, Song Fu

Abstract: Data-driven turbulence modeling has been considered an effective method for improving the prediction accuracy of Reynolds-averaged Navier-Stokes equations. Related studies aimed to solve the discrepancy of traditional turbulence modeling by acquiring specific patterns from high-fidelity data through machine learning methods, such as artificial neural networks. The present study focuses on the unsm… ▽ More Data-driven turbulence modeling has been considered an effective method for improving the prediction accuracy of Reynolds-averaged Navier-Stokes equations. Related studies aimed to solve the discrepancy of traditional turbulence modeling by acquiring specific patterns from high-fidelity data through machine learning methods, such as artificial neural networks. The present study focuses on the unsmoothness and prediction error problems from the aspect of feature selection and processing. The selection criteria for the input features are summarized, and an effective input set is constructed. The effect of the computation grid on the smoothness is studied. A modified feature decomposition method for the spatial orientation feature of the Reynolds stress is proposed. The improved machine learning framework is then applied to the periodic hill database with notably varying geometries. The results of the modified method show significant enhancement in the prediction accuracy and smoothness, including the shape and size of separation areas and the friction and pressure distributions on the wall, which confirms the validity of the approach. △ Less

Submitted 5 October, 2020; originally announced October 2020.

Comments: 43 pages, 17 figures

Report number: https://aip.scitation.org/doi/10.1063/5.0022561

Journal ref: Physics of Fluids 32, 105117 (2020)

Quantifying Policy Responses to a Global Emergency: Insights from the COVID-19 Pandemic

Authors: Jian Gao, Yian Yin, Benjamin F. Jones, Dashun Wang

Abstract: Public policy must confront emergencies that evolve in real time and in uncertain directions, yet little is known about the nature of policy response. Here we take the coronavirus pandemic as a global and extraordinarily consequential case, and study the global policy response by analyzing a novel dataset recording policy documents published by government agencies, think tanks, and intergovernment… ▽ More Public policy must confront emergencies that evolve in real time and in uncertain directions, yet little is known about the nature of policy response. Here we take the coronavirus pandemic as a global and extraordinarily consequential case, and study the global policy response by analyzing a novel dataset recording policy documents published by government agencies, think tanks, and intergovernmental organizations (IGOs) across 114 countries (37,725 policy documents from Jan 2nd through May 26th 2020). Our analyses reveal four primary findings. (1) Global policy attention to COVID-19 follows a remarkably similar trajectory as the total confirmed cases of COVID-19, yet with evolving policy focus from public health to broader social issues. (2) The COVID-19 policy frontier disproportionately draws on the latest, peer-reviewed, and high-impact scientific insights. Moreover, policy documents that cite science appear especially impactful within the policy domain. (3) The global policy frontier is primarily interconnected through IGOs, such as the WHO, which produce policy documents that are central to the COVID19 policy network and draw especially strongly on scientific literature. Removing IGOs' contributions fundamentally alters the global policy landscape, with the policy citation network among government agencies increasingly fragmented into many isolated clusters. (4) Countries exhibit highly heterogeneous policy attention to COVID-19. Most strikingly, a country's early policy attention to COVID-19 shows a surprising degree of predictability for the country's subsequent deaths. Overall, these results uncover fundamental patterns of policy interactions and, given the consequential nature of emergent threats and the paucity of quantitative approaches to understand them, open up novel dimensions for assessing and effectively coordinating global and local responses to COVID-19 and beyond. △ Less

Submitted 24 June, 2020; originally announced June 2020.

Quantifying the Immediate Effects of the COVID-19 Pandemic on Scientists

Authors: Kyle R. Myers, Wei Yang Tham, Yian Yin, Nina Cohodes, Jerry G. Thursby, Marie C. Thursby, Peter E. Schiffer, Joseph T. Walsh, Karim R. Lakhani, Dashun Wang

Abstract: The COVID-19 pandemic has undoubtedly disrupted the scientific enterprise, but we lack empirical evidence on the nature and magnitude of these disruptions. Here we report the results of a survey of approximately 4,500 Principal Investigators (PIs) at U.S.- and Europe-based research institutions. Distributed in mid-April 2020, the survey solicited information about how scientists' work changed from… ▽ More The COVID-19 pandemic has undoubtedly disrupted the scientific enterprise, but we lack empirical evidence on the nature and magnitude of these disruptions. Here we report the results of a survey of approximately 4,500 Principal Investigators (PIs) at U.S.- and Europe-based research institutions. Distributed in mid-April 2020, the survey solicited information about how scientists' work changed from the onset of the pandemic, how their research output might be affected in the near future, and a wide range of individuals' characteristics. Scientists report a sharp decline in time spent on research on average, but there is substantial heterogeneity with a significant share reporting no change or even increases. Some of this heterogeneity is due to field-specific differences, with laboratory-based fields being the most negatively affected, and some is due to gender, with female scientists reporting larger declines. However, among the individuals' characteristics examined, the largest disruptions are connected to a usually unobserved dimension: childcare. Reporting a young dependent is associated with declines similar in magnitude to those reported by the laboratory-based fields and can account for a significant fraction of gender differences. Amidst scarce evidence about the role of parenting in scientists' work, these results highlight the fundamental and heterogeneous ways this pandemic is affecting the scientific workforce, and may have broad relevance for shaping responses to the pandemic's effect on science and beyond. △ Less

Submitted 26 May, 2020; v1 submitted 22 May, 2020; originally announced May 2020.

Ho:YLF amplifier with Ti:Sapphire frontend for pumping mid-infrared optical parametric amplifier

Authors: Krishna Murari, Fangjie Zhou, Yanchun Yin, Yi Wu, Bruce Weaver, Timur Avni, Esben Larsen, Zenghu Chang

Abstract: We present a Ho:YLF Chirped-Pulse Amplification (CPA) laser for pumping a longwave infrared Optical Parametric Chirped Pulse Amplifier (OPCPA) at a 1 kHz repetition rate. By utilizing a Ti:Sapphire laser as a frontend, 5-μJ seed pulses at 2051 nm laser pulse are generated in a Dual-Chirp Optical Parametric Amplifier (DC-OPA), which are amplified to 28 mJ pulses with a pulse duration of 6.8 ps. The… ▽ More We present a Ho:YLF Chirped-Pulse Amplification (CPA) laser for pumping a longwave infrared Optical Parametric Chirped Pulse Amplifier (OPCPA) at a 1 kHz repetition rate. By utilizing a Ti:Sapphire laser as a frontend, 5-μJ seed pulses at 2051 nm laser pulse are generated in a Dual-Chirp Optical Parametric Amplifier (DC-OPA), which are amplified to 28 mJ pulses with a pulse duration of 6.8 ps. The scheme offers a potential driver for two-color (800 nm and 8 μm) high harmonic generation with an increased keV X-ray photon flux. △ Less

Submitted 27 April, 2020; originally announced April 2020.

Comments: 5 pages, 5 figures

Performance of the ISS-CREAM calorimeter in a calibration beam test

Authors: H. G. Zhang, D. Angelaszek, M. Copley, J. H. Han, H. G. Huh, Y. S. Hwang, H. J. Hyun, J. A. Jeon, K. C. Kim, M. H. Kim, H. J. Kim, K. Kwashnak, H. Y. Lee, J. Lee, M. H. Lee, J. Lundquist, L. Lutz, A. Malinin, H. Park, J. M. Park, N. Picot-Clemente, E. S. Seo, J. Smith, J. Wu, Z. Y. Yin , et al. (1 additional authors not shown)

Abstract: The Cosmic Ray Energetics And Mass experiment for the International Space Station (ISS-CREAM) was installed on the ISS to measure high-energy cosmic-ray elemental spectra for the charge range $\rm Z=1$ to 26. The ISS-CREAM instrument includes a tungsten scintillating-fiber calorimeter preceded by a carbon target for energy measurements. The carbon target induces hadronic interactions, and showers… ▽ More The Cosmic Ray Energetics And Mass experiment for the International Space Station (ISS-CREAM) was installed on the ISS to measure high-energy cosmic-ray elemental spectra for the charge range $\rm Z=1$ to 26. The ISS-CREAM instrument includes a tungsten scintillating-fiber calorimeter preceded by a carbon target for energy measurements. The carbon target induces hadronic interactions, and showers of secondary particles develop in the calorimeter. The energy deposition in the calorimeter is proportional to the particle energy. As a predecessor to ISS-CREAM, the balloon-borne CREAM instrument was successfully flown seven times over Antarctica for a cumulative exposure of 191 days. The CREAM calorimeter demonstrated its capability to measure energies of cosmic-ray particles, and the ISS-CREAM calorimeter is expected to have a similar performance. Before the launch, an engineering-unit calorimeter was shipped to CERN for calibration and performance tests. This beam test included position, energy, and angle scans of electron and pion beams together with a high-voltage scan for calibration and characterization. Additionally, an attenuation effect in the scintillating fibers was studied. In this paper, beam test results, including corrections for the attenuation effect, are presented. △ Less

Submitted 9 June, 2021; v1 submitted 21 April, 2020; originally announced April 2020.

Comments: 23 pages, 18 figures

Modeling Epidemic Spreading through Public Transit using Time-Varying Encounter Network

Authors: Baichuan Mo, Kairui Feng, Yu Shen, Clarence Tam, Daqing Li, Yafeng Yin, Jinhua Zhao

Abstract: Passenger contact in public transit (PT) networks can be a key mediate in the spreading of infectious diseases. This paper proposes a time-varying weighted PT encounter network to model the spreading of infectious diseases through the PT systems. Social activity contacts at both local and global levels are also considered. We select the epidemiological characteristics of coronavirus disease 2019 (… ▽ More Passenger contact in public transit (PT) networks can be a key mediate in the spreading of infectious diseases. This paper proposes a time-varying weighted PT encounter network to model the spreading of infectious diseases through the PT systems. Social activity contacts at both local and global levels are also considered. We select the epidemiological characteristics of coronavirus disease 2019 (COVID-19) as a case study along with smart card data from Singapore to illustrate the model at the metropolitan level. A scalable and lightweight theoretical framework is derived to capture the time-varying and heterogeneous network structures, which enables to solve the problem at the whole population level with low computational costs. Different control policies from both the public health side and the transportation side are evaluated. We find that people's preventative behavior is one of the most effective measures to control the spreading of epidemics. From the transportation side, partial closure of bus routes helps to slow down but cannot fully contain the spreading of epidemics. Identifying "influential passengers" using the smart card data and isolating them at an early stage can also effectively reduce the epidemic spreading. △ Less

Submitted 21 November, 2020; v1 submitted 9 April, 2020; originally announced April 2020.

Scientific elite revisited: Patterns of productivity, collaboration, authorship and impact

Authors: Jichao Li, Yian Yin, Santo Fortunato, Dashun Wang

Abstract: Throughout history, a relatively small number of individuals have made a profound and lasting impact on science and society. Despite long-standing, multi-disciplinary interests in understanding careers of elite scientists, there have been limited attempts for a quantitative, career-level analysis. Here, we leverage a comprehensive dataset we assembled, allowing us to trace the entire career histor… ▽ More Throughout history, a relatively small number of individuals have made a profound and lasting impact on science and society. Despite long-standing, multi-disciplinary interests in understanding careers of elite scientists, there have been limited attempts for a quantitative, career-level analysis. Here, we leverage a comprehensive dataset we assembled, allowing us to trace the entire career histories of nearly all Nobel laureates in physics, chemistry, and physiology or medicine over the past century. We find that, although Nobel laureates were energetic producers from the outset, producing works that garner unusually high impact, their careers before winning the prize follow relatively similar patterns as ordinary scientists, being characterized by hot streaks and increasing reliance on collaborations. We also uncovered notable variations along their careers, often associated with the Nobel prize, including shifting coauthorship structure in the prize-winning work, and a significant but temporary dip in the impact of work they produce after winning the Nobel. Together, these results document quantitative patterns governing the careers of scientific elites, offering an empirical basis for a deeper understanding of the hallmarks of exceptional careers in science. △ Less

Submitted 27 March, 2020; originally announced March 2020.

Generation of 3 mJ, 44 fs, 2.5 micrometer pulses from a single-stage Cr2+:ZnSe amplifier

Authors: Yi. Wu, Fangjie Zhou, Esben W. Larsen, Fengjiang Zhuang, Yanchun Yin, Zenghu Chang

Abstract: Lasers capable of generating attosecond X-ray pulses in the water window (282 to 533 eV) through high-order harmonic generation are normally based on inefficient, multi-stage optical parametric amplifiers or optical parametric chirped pulse amplifiers pumped by femtosecond or picosecond lasers. Here we report a very efficient single amplification stage laser based on traditional chirped pulse ampl… ▽ More Lasers capable of generating attosecond X-ray pulses in the water window (282 to 533 eV) through high-order harmonic generation are normally based on inefficient, multi-stage optical parametric amplifiers or optical parametric chirped pulse amplifiers pumped by femtosecond or picosecond lasers. Here we report a very efficient single amplification stage laser based on traditional chirped pulse amplification capable of producing 3 mJ, near-transform limited 44 fs (<6 cycles), 1 kHz pulses centered at 2.5 micrometer. The 68 GW peak power is the highest value ever reached at this wavelength. In order to fully compress the laser pulses our system is built in a nitrogen box. Our system utilizes water cooled chromium doped zinc selenide (Cr2+:ZnSe) as the gain medium and is pumped by a commercial nanosecond holmium doped yttrium-aluminum-garnet (Ho:YAG) laser. △ Less

Submitted 15 October, 2019; originally announced October 2019.

Comments: 4 pages, 3 figures

Adiabatic hydrodynamization in rapidly-expanding quark-gluon plasma

Authors: Jasmine Brewer, Li Yan, Yi Yin

Abstract: We propose a new scenario characterizing the transition of the quark-gluon plasma (QGP) produced in heavy-ion collisions from a highly non-equilibrium state at early times toward a fluid described by hydrodynamics at late times. We develop an analogy to the evolution of a quantum mechanical system that is governed by the instantaneous ground states. In the simplest case, these slow modes are "pre-… ▽ More We propose a new scenario characterizing the transition of the quark-gluon plasma (QGP) produced in heavy-ion collisions from a highly non-equilibrium state at early times toward a fluid described by hydrodynamics at late times. We develop an analogy to the evolution of a quantum mechanical system that is governed by the instantaneous ground states. In the simplest case, these slow modes are "pre-hydrodynamic" in the sense that they are initially distinct from, but evolve continuously into, hydrodynamic modes. For a class of collision integrals, the pre-hydrodynamic mode represents the angular distribution (in momentum space) of those gluons that carry most of the energy. We illustrate this scenario using a kinetic description of weakly-coupled Bjorken expanding plasma. Rapid longitudinal expansion drives a reduction in the degrees of freedom at early times. In the relaxation time approximation for the collision integral, we show quantitatively that the full kinetic theory evolution is dominated by the pre-hydrodynamic mode. We elaborate on the criterion for the dominance of pre-hydrodynamic slow modes and speculate that adiabatic hydrodynamization may describe the pre-equilibrium behavior of the QGP produced in heavy-ion collisions. △ Less

Submitted 9 March, 2021; v1 submitted 30 September, 2019; originally announced October 2019.

Comments: 7 pages, 1 figure. Added appendix and updates to match published version

Report number: MIT-CTP/5141

Journal ref: Phys. Lett. B 816, 136189 (2021)

High-performance silicon-graphene hybrid plasmonic waveguide photodetectors beyond 1.55 μm

Authors: Jingshu Guo, Jiang Li, Chaoyue Liu, Yanlong Yin, Wenhui Wang, Zhenhua Ni, Zhilei Fu, Hui Yu, Yang Xu, Yaocheng Shi, Yungui Ma, Shiming Gao, Liming Tong, Daoxin Dai

Abstract: A fast silicon-graphene hybrid plasmonic waveguide photodetectors beyond 1.55 μm is proposed and realized by introducing an ultra-thin wide silicon-on-insulator ridge core region with a narrow metal cap. With this novel design, the light absorption in graphene is enhanced while the metal absorption loss is reduced simultaneously, which helps greatly improve the responsivity as well as shorten the… ▽ More A fast silicon-graphene hybrid plasmonic waveguide photodetectors beyond 1.55 μm is proposed and realized by introducing an ultra-thin wide silicon-on-insulator ridge core region with a narrow metal cap. With this novel design, the light absorption in graphene is enhanced while the metal absorption loss is reduced simultaneously, which helps greatly improve the responsivity as well as shorten the absorption region for achieving fast responses. Furthermore, metal-graphene-metal sandwiched electrodes are introduced to reduce the metal-graphene contact resistance, which is also helpful for improving the response speed. When the photodetector operates at 2 μm, the measured 3dB-bandwidth is >20 GHz (which is limited by the experimental setup) while the 3dB-bandwith calculated from the equivalent circuit with the parameters extracted from the measured S11 is as high as ~100 GHz. To the best of our knowledge, it is the first time to report the waveguide photodetector at 2 μm with a 3dB-bandwidth over 20 GHz. Besides, the present photodetectors also work very well at 1.55 μm. The measured responsivity is about 0.4 A/W under a bias voltage of -0.3 V for an optical power of 0.16 mW, while the measured 3dB-bandwidth is over 40 GHz (limited by the test setup) and the 3 dB-bandwidth estimated from the equivalent circuit is also as high as ~100 GHz, which is one of the best results reported for silicon-graphene photodetectors at 1.55 μm. △ Less

Submitted 18 July, 2019; originally announced July 2019.

Comments: 22 pages, 7 figures, 1 table. Supplementary Materials are available

Lifetime Measurements of the $A^2Π_{1/2}$ and $A^2Π_{3/2}$ States in BaF

Authors: P. Aggarwal, V. R. Marshall, H. L. Bethlem, A. Boeschoten, A. Borschevsky, M. Denis, K. Esajas, Y. Hao, S. Hoekstra, K. Jungmann, T. B. Meijknecht, M. C. Mooij, R. G. E. Timmermans, A. Touwen, W. Ubachs, S. M. Vermeulen, L. Willmann, Y. Yin, A. Zapara

Abstract: Time resolved detection of laser induced fluorescence from pulsed excitation of electronic states in barium monofluoride (BaF) molecules has been performed in order to determine the lifetimes of the $A^2Π_{1/2}$ and $A^2Π_{3/2}$ states. The method permits control over experimental parameters such that systematic biases in the interpretation of the data can be controlled to below $10^{-3}$ relative… ▽ More Time resolved detection of laser induced fluorescence from pulsed excitation of electronic states in barium monofluoride (BaF) molecules has been performed in order to determine the lifetimes of the $A^2Π_{1/2}$ and $A^2Π_{3/2}$ states. The method permits control over experimental parameters such that systematic biases in the interpretation of the data can be controlled to below $10^{-3}$ relative accuracy. The statistically limited values for the lifetimes of the $A^2Π_{1/2}(ν=0)$ and $A^2Π_{3/2}(ν=0)$ states are 57.1(3) ns and 47.9(7)~ns, respectively. The ratio of these values is in good agreement with scaling for the different excitation energies. The investigated molecular states are of relevance for an experimental search for a permanent electric dipole moment (EDM) of the electron in BaF. △ Less

Submitted 16 July, 2019; originally announced July 2019.

Journal ref: Phys. Rev. A 100, 052503 (2019)

High accuracy theoretical investigations of CaF, SrF, and BaF and implications for laser-cooling

Authors: Yongliang Hao, Lukaš F. Pašteka, Lucas Visscher, the NL-eEDM collaboration, :, Parul Aggarwal, Hendrick L. Bethlem, Alexander Boeschoten, Anastasia Borschevsky, Malika Denis, Kevin Esajas, Steven Hoekstra, Klaus Jungmann, Virginia R. Marshall, Thomas B. Meijknecht, Maarten C. Mooij, Rob G. E. Timmermans, Anno Touwen, Wim Ubachs, Lorenz Willmann, Yanning Yin, Artem Zapara

Abstract: The NL-eEDM collaboration is building an experimental setup to search for the permanent electric dipole moment of the electron in a slow beam of cold barium fluoride molecules [Eur. Phys. J. D, 72, 197 (2018)]. Knowledge of molecular properties of BaF is thus needed to plan the measurements and in particular to determine an optimal laser-cooling scheme. Accurate and reliable theoretical prediction… ▽ More The NL-eEDM collaboration is building an experimental setup to search for the permanent electric dipole moment of the electron in a slow beam of cold barium fluoride molecules [Eur. Phys. J. D, 72, 197 (2018)]. Knowledge of molecular properties of BaF is thus needed to plan the measurements and in particular to determine an optimal laser-cooling scheme. Accurate and reliable theoretical predictions of these properties require incorporation of both high-order correlation and relativistic effects in the calculations. In this work theoretical investigations of the ground and the lowest excited states of BaF and its lighter homologues, CaF and SrF, are carried out in the framework of the relativistic Fock-space coupled cluster (FSCC) and multireference configuration interaction (MRCI) methods. Using the calculated molecular properties, we determine the Franck-Condon factors (FCFs) for the $A^2Π_{1/2} \rightarrow X^2Σ^{+}_{1/2}$ transition, which was successfully used for cooling CaF and SrF and is now considered for BaF. For all three species, the FCFs are found to be highly diagonal. Calculations are also performed for the $B^2Σ^{+}_{1/2} \rightarrow X^2Σ^{+}_{1/2}$ transition recently exploited for laser-cooling of CaF; it is shown that this transition is not suitable for laser-cooling of BaF, due to the non-diagonal nature of the FCFs in this system. Special attention is given to the properties of the $A'^2Δ$ state, which in the case of BaF causes a leak channel, in contrast to CaF and SrF species where this state is energetically above the excited states used in laser-cooling. We also present the dipole moments of the ground and the excited states of the three molecules and the transition dipole moments (TDMs) between the different states. △ Less

Submitted 3 June, 2019; v1 submitted 4 April, 2019; originally announced April 2019.

Comments: Minor changes; The following article has been submitted to the Journal of Chemical Physics. After it is published, it will be found at https://publishing.aip.org/resources/librarians/products/journals/

Journal ref: J. Chem. Phys. 151, 034302 (2019)

A Theoretical Investigation of Charge Density Wave Instability in CuS$_2$

Authors: Yuxin Yin, Jennifer Coulter, Christopher J. Ciccarino, Prineha Narang

Abstract: The existence of a charge density wave (CDW) in transition metal dichalcogenide CuS$_2$ has remained undetermined since its first experimental synthesis nearly 50 years ago. Despite conflicting experimental literature regarding its low temperature structure, there exists no theoretical study of the phonon properties and lattice stability of this material. By studying the first-principles electroni… ▽ More The existence of a charge density wave (CDW) in transition metal dichalcogenide CuS$_2$ has remained undetermined since its first experimental synthesis nearly 50 years ago. Despite conflicting experimental literature regarding its low temperature structure, there exists no theoretical study of the phonon properties and lattice stability of this material. By studying the first-principles electronic structure and phonon properties of CuS$_2$ at various electronic temperatures, we identify temperature-sensitive soft phonon modes which unveil a previously unreported Kohn anomaly at approximately 100K. Variation of the electronic temperature shows the presence of two distinct phases, characterized at low temperature by a $2\times2\times2$ periodic charge modulation associated with the motion of the S$_2$ dimers. Investigation of the Fermi surface presents a potential Fermi surface nesting vector related to the location of the Kohn anomaly and observed band splittings in the unfolded bandstructure. The combination of these results suggests a strong possibility of CDW order in CuS$_2$. Further study of CuS$_2$ in monolayer form finds no evidence of a CDW phase, as the identified bulk periodic distortions cannot be realized in 2D. This behavior sets this material apart from other transition metal dichalcogenide materials, which exhibit a charge density wave phase down to the 2D limit. As CDW in TMDC materials is considered to compete with superconductivity, the lack of CDW in monolayer CuS$_2$ suggests the possibility of enhanced superconductivity relative to other transition metal dichalcogenides. Overall, our work identifies CuS$_2$ as a previously unrealized candidate to study interplay of superconductivity, CDW order, and dimensionality. △ Less

Submitted 21 March, 2019; originally announced March 2019.

Comments: 6 pages, 4 figures

Journal ref: Phys. Rev. Materials 4, 104001 (2020)

Quantifying dynamics of failure across science, startups, and security

Authors: Yian Yin, Yang Wang, James A. Evans, Dashun Wang

Abstract: Human achievements are often preceded by repeated attempts that initially fail, yet little is known about the mechanisms governing the dynamics of failure. Here, building on the rich literature on innovation, human dynamics and learning, we develop a simple one-parameter model that mimics how successful future attempts build on those past. Analytically solving this model reveals a phase transition… ▽ More Human achievements are often preceded by repeated attempts that initially fail, yet little is known about the mechanisms governing the dynamics of failure. Here, building on the rich literature on innovation, human dynamics and learning, we develop a simple one-parameter model that mimics how successful future attempts build on those past. Analytically solving this model reveals a phase transition that separates dynamics of failure into regions of stagnation or progression, predicting that near the critical threshold, agents who share similar characteristics and learning strategies may experience fundamentally different outcomes following failures. Below the critical point, we see those who explore disjoint opportunities without a pattern of improvement, and above it, those who exploit incremental refinements to systematically advance toward success. The model makes several empirically testable predictions, demonstrating that those who eventually succeed and those who do not may be initially similar, yet are characterized by fundamentally distinct failure dynamics in terms of the efficiency and quality of each subsequent attempt. We collected large-scale data from three disparate domains, tracing repeated attempts by (i) NIH investigators to fund their research, (ii) innovators to successfully exit their startup ventures, and (iii) terrorist organizations to post casualties in violent attacks, finding broadly consistent empirical support across all three domains. Together, our findings unveil identifiable yet previously unknown early signals that allow us to identify failure dynamics that will lead to ultimate victory or defeat. Given the ubiquitous nature of failures and the paucity of quantitative approaches to understand them, these results represent a crucial step toward deeper understanding of the complex dynamics beneath failures, the essential prerequisites for success. △ Less

Submitted 18 March, 2019; originally announced March 2019.

Identifying the Geometry of an Object Using Lock-In Thermography

Authors: Xiao Tian, Meng Yuan Yin, Kok Hin Henry Goh

Abstract: Lock-in Thermography (LIT) is a type of Infrared Thermography (IRT) that can be used as a useful non-destructive testing (NDT) technique for the detection of subsurface anomalies in objects. Currently, LIT fails to estimate the thickness at a point on the tested object. This makes LIT unable to figure out the 3-dimensional geometry of an object. In this project, two techniques of identifying the g… ▽ More Lock-in Thermography (LIT) is a type of Infrared Thermography (IRT) that can be used as a useful non-destructive testing (NDT) technique for the detection of subsurface anomalies in objects. Currently, LIT fails to estimate the thickness at a point on the tested object. This makes LIT unable to figure out the 3-dimensional geometry of an object. In this project, two techniques of identifying the geometry of an object using LIT are discussed. The main idea of both techniques is to find a relationship between the parameters obtained from LIT and the thickness at each data point. Technique I builds a numerical function that models the relationship between thickness, Lock-In phase, and other parameters. The function is then inverted for thickness estimation. Technique II is a quantitative method, in which a database is created with six dimensions - thickness, Lock-In phase, Lock-In amplitude and three other parameters, based on data obtained from LIT experiments or simulations. Estimated thickness is obtained by retrieving data from the database. The database can be improved based on Principal Component Analysis. Evaluation of the techniques is done by measuring root-mean-square deviation, and calculating successful rate with different tolerances. Moreover, during the application of the techniques, Stochastic Gradient Descent can be used to determine the time when sufficient data have been collected from LIT measurement to generate the estimated geometry accurately. △ Less

Submitted 7 March, 2019; originally announced March 2019.

Comments: Thermography, depth/thickness detection, Lock-In Thermography, Big Data, Additive Manufacturing

MSC Class: 62P30

Three-dimensional modeling magneto-optical trapping of MgF molecule with multilevel rate equations

Authors: Supeng Xu, Meng Xia, Ruoxi Gu, Yanning Yin, Liang Xu, Yong Xia, Jianping Yin

Abstract: We present a theoretical study of magneto-optical trapping (MOT) force exerted on magnesium monofluoride (MgF) with 3D rate equations, in which we have considered the complex vibrational and rotational levels and the effects of small internal splittings and degeneracies,including fine and hyperfine structures and the magnetic quantum numbers. We investigate the feasibility of MOT for MgF with a ve… ▽ More We present a theoretical study of magneto-optical trapping (MOT) force exerted on magnesium monofluoride (MgF) with 3D rate equations, in which we have considered the complex vibrational and rotational levels and the effects of small internal splittings and degeneracies,including fine and hyperfine structures and the magnetic quantum numbers. We investigate the feasibility of MOT for MgF with a very small excited state g-factor ($g_{e} = -0.0002$) and a large radiative decay reate ($Γ = 2π\times22$MHz) for the electronic transition of X$^2Σ^{+}$ to A$^2Π_{1/2}$ states. We also optimize the MOT with reference to the three-, four- and more-frequency component models with various polarization configurations and detunings. By applying the dual frequency arrangement to more than one hyperfine level, we suggest a configuration of the 3+1 frequency components for achieving the MOT of MgF. △ Less

Submitted 1 March, 2019; originally announced March 2019.

Experimental Investigation of the Transition Energy $γ_t$ in the Isochronous Mode of the HIRFL-CSRe

Authors: W. W. Ge, Y. J. Yuan, J. C. Yang, R. J. Chen, X. L. Yan, H. Du, Z. S. Li, J. Yang, D. Y. Yin, L. J. Mao, X. N. Li, W. H. Zheng, G. D. Shen, B. Wu, S. Ruan, G. Wang, H. Zhao, M. Wang, M. Z. Sun, Y. M. Xing, P. Zhang, C. Y. Fu, P. Shuai, X. Xu, Y. H. Zhang , et al. (9 additional authors not shown)

Abstract: The Isochronous Mass Spectrometry (IMS) based on storage rings is a powerful technique for mass measurement of short-lived exotic nuclei. The transition energy $γ_t$ of the storage ring is a vital parameter of the IMS technique. It is difficult to measure the $γ_t$ and its relation to momentum spread or circulating length, especially to monitor the variation of $γ_t$ during experiments. An experim… ▽ More The Isochronous Mass Spectrometry (IMS) based on storage rings is a powerful technique for mass measurement of short-lived exotic nuclei. The transition energy $γ_t$ of the storage ring is a vital parameter of the IMS technique. It is difficult to measure the $γ_t$ and its relation to momentum spread or circulating length, especially to monitor the variation of $γ_t$ during experiments. An experimental investigation on the $γ_t$ has been performed for the IMS experiment at the Cooler Storage Ring of the Heavy Ion Research Facility in Lanzhou (HIRFL-CSRe). With the velocity measured by two time-of-flight (TOF) detectors, the $γ_t$ as a function of orbital length can be determined. The influences of higher order magnetic field components on the $γ_t$ function were inferred for isochronous correction. This paper introduces and investigates the influence of dipole magnetic fields, quadrupole magnetic fields and sextupole magnetic fields on the $γ_t$ function. With the quadrupole magnets and sextupole magnets corrections, a mass resolution of 171332 (FWHM) and $σ(T)/T=1.34\times10^{-6}$ were reached, which shall be compared with 31319 (FWHM) and $σ(T)/T=7.35\times10^{-6}$ obtained without correction. △ Less

Submitted 29 November, 2018; originally announced November 2018.

Comments: 10 figures,19 pages

Journal ref: Nuclear Inst. and Methods in Physics Research, A (2018)

A method to measure the transition energy $γ_{t}$ of the isochronously tuned storage ring

Authors: R. J. Chen, X. L. Yan, W. W. Ge, Y. J. Yuan, M. Wang, M. Z. Sun, Y. M. Xing, P. Zhang, C. Y. Fu, P. Shuai, X. Xu, Y. H. Zhang, T. Bao, X. C. Chen, X. J. Hu, W. J. Huang, H. F. Li, J. H. Liu, Yu. A. Litvinov, S. A. Litvinov, L. J. Mao, B. Wu, H. S. Xu, J. C. Yang, D. Y. Yin , et al. (5 additional authors not shown)

Abstract: The Isochronous Mass Spectrometry (IMS) is a powerful technique developed in heavy-ion storage rings for measuring masses of very short-lived exotic nuclei. The IMS is based on the isochronous setting of the ring. One of the main parameters of this setting is the transition energy $γ_{t}$. %The transition energy $γ_{t}$ plays an important role in the isochronous mass spectrometry (IMS). It has bee… ▽ More The Isochronous Mass Spectrometry (IMS) is a powerful technique developed in heavy-ion storage rings for measuring masses of very short-lived exotic nuclei. The IMS is based on the isochronous setting of the ring. One of the main parameters of this setting is the transition energy $γ_{t}$. %The transition energy $γ_{t}$ plays an important role in the isochronous mass spectrometry (IMS). It has been a challenge to determine the $γ_{t}$ and especially to monitor the variation of $γ_{t}$ during experiments. In this paper we introduce a method to measure the $γ_{t}$ online during IMS experiments by using the acquired experimental data. Furthermore, since the storage ring has (in our context) a relatively large momentum acceptance, the variation of the $γ_{t}$ across the ring acceptance is a source of systematic uncertainty of measured masses. With the installation of two time-of-flight (TOF) detectors, the velocity of each stored ion and its revolution time are simultaneously available for the analysis. These quantities enabled us to determine the $γ_{t}$ as a function of orbital length in the ring. The presented method is especially important for future IMS experiments planned at the new-generation storage ring facilities FAIR in Germany and HIAF in China. △ Less

Submitted 22 November, 2018; originally announced November 2018.

Comments: 7 pages

High-speed and high-responsivity hybrid silicon/black-phosphorus waveguide photodetectors at 2 μm

Authors: Yanlong Yin, Rui Cao, Jingshu Guo, Chaoyue Liu, Jiang Li, Xianglian Feng, Huide Wang, Wei Du, Akeel Qadir, Han Zhang, Yungui Ma, Shiming Gao, Yang Xu, Yaocheng Shi, Limin Tong, Daoxin Dai

Abstract: Silicon photonics is being extended from the near-infrared (near-IR) window of 1.3-1.5 μm for optical fiber communications to the mid-infrared (mid-IR) wavelength-band of 2 μm or longer for satisfying the increasing demands in many applications. Mid-IR waveguide photodetectors on silicon have attracted intensive attention as one of the indispensable elements for various photonic systems. Previousl… ▽ More Silicon photonics is being extended from the near-infrared (near-IR) window of 1.3-1.5 μm for optical fiber communications to the mid-infrared (mid-IR) wavelength-band of 2 μm or longer for satisfying the increasing demands in many applications. Mid-IR waveguide photodetectors on silicon have attracted intensive attention as one of the indispensable elements for various photonic systems. Previously high-performance waveguide photodetectors on silicon were realized for the near-IR window of 1.3-1.5 μm by introducing another semiconductor material (e.g., Ge, and III-V compounds) in the active region. Unfortunately, these traditional semiconductor materials do not work well for the wavelength of ~2 μm or longer because the light absorption becomes very weak. As an alternative, two-dimensional materials provide a new and promising option for enabling active photonic devices on silicon. Here black-phosphorus (BP) thin films with optimized medium thicknesses (~40 nm) are introduced as the active material for light absorption and silicon/BP hybrid ridge waveguide photodetectors are demonstrated with a high responsivity at a low bias voltage. And up to 4.0Gbps data transmission is achieved at 2μm. △ Less

Submitted 5 November, 2018; originally announced November 2018.

Comments: 20 pages, 13 figures, 2 tables