-
Exploring control of the emergent exciton insulator state in 1T-TiSe$_2$ monolayer by state-of-the-art theory models
Authors:
Hong Tang,
Li Yin,
Gábor I. Csonka,
Adrienn Ruzsinszky
Abstract:
The layered transition metal dichalcogenide 1T-TiSe$_2$ is of great research interest, having intriguing properties of charge density waves (CDW) and superconductivity under doping or pressurizing. The monolayer form of 1T-TiSe$_2$ also shows a CDW with a higher transition temperature T_c than the bulk, indicating a stronger CDW interaction. By using the meta-generalized gradient approximation (me…
▽ More
The layered transition metal dichalcogenide 1T-TiSe$_2$ is of great research interest, having intriguing properties of charge density waves (CDW) and superconductivity under doping or pressurizing. The monolayer form of 1T-TiSe$_2$ also shows a CDW with a higher transition temperature T_c than the bulk, indicating a stronger CDW interaction. By using the meta-generalized gradient approximation (metaGGA)-based model Bethe-Salpeter Equation (BSE) and many-body perturbation GW+BSE methods, we calculate the exciton binding energies and electron energy loss spectrum (EELS) for the 1T-TiSe$_2$ monolayer under different in-plane biaxial strains. We find that even without strain the 1T-TiSe$_2$ monolayer can have negative exciton energies at the Brillouin zone boundary point M, with a binding energy larger than the gap. The calculated EELS reinforces this picture, indicating EI (exciton insulator) states in 1T-TiSe$_2$ monolayer even without strain. The Wannier-Mott formula calculations of exciton binding energy corroborate results from GW+BSE. Small compressive strains enhance the EI state, and for tensile strains slightly less than 3%, the EI state in this monolayer persists. At large tensile strains, the material makes a transition to a normal semiconductor. Our results provide important information for understanding the quantum nature of this two-dimensional (2D) material. Our results from the standard G0W0@PBE+SOC+U+BSE approach are not qualitatively different from those of a more computationally efficient metaGGA-based SCAN+SOC+U+mBSE+$f_{xc}^{loc}$ approach that employs a model BSE.
△ Less
Submitted 4 July, 2024;
originally announced July 2024.
-
Data quality control system and long-term performance monitor of the LHAASO-KM2A
Authors:
Zhen Cao,
F. Aharonian,
Axikegu,
Y. X. Bai,
Y. W. Bao,
D. Bastieri,
X. J. Bi,
Y. J. Bi,
W. Bian,
A. V. Bukevich,
Q. Cao,
W. Y. Cao,
Zhe Cao,
J. Chang,
J. F. Chang,
A. M. Chen,
E. S. Chen,
H. X. Chen,
Liang Chen,
Lin Chen,
Long Chen,
M. J. Chen,
M. L. Chen,
Q. H. Chen,
S. Chen
, et al. (263 additional authors not shown)
Abstract:
The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To…
▽ More
The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To ensure the reliability of the LHAASO-KM2A data, a three-level quality control system has been established. It is used to monitor the status of detector units, stability of reconstructed parameters and the performance of the array based on observations of the Crab Nebula and Moon shadow. This paper will introduce the control system and its application on the LHAASO-KM2A data collected from August 2021 to July 2023. During this period, the pointing and angular resolution of the array were stable. From the observations of the Moon shadow and Crab Nebula, the results achieved using the two methods are consistent with each other. According to the observation of the Crab Nebula at energies from 25 TeV to 100 TeV, the time averaged pointing errors are estimated to be $-0.003^{\circ} \pm 0.005^{\circ}$ and $0.001^{\circ} \pm 0.006^{\circ}$ in the R.A. and Dec directions, respectively.
△ Less
Submitted 13 June, 2024; v1 submitted 20 May, 2024;
originally announced May 2024.
-
Research on the knee region of cosmic ray by using a novel type of electron-neutron detector array
Authors:
Bing-Bing Li,
Xin-Hua Ma,
Shu-Wang Cui,
Hao-Kun Chen,
Tian-Lu Chen,
Danzengluobu,
Wei Gao,
Hai-Bing Hu,
Denis Kuleshov,
Kirill Kurinov,
Hu Liu,
Mao-Yuan Liu,
Ye Liu,
Da-Yu Peng,
Yao-Hui Qi,
Oleg Shchegolev,
Yuri Stenkin,
Li-Qiao Yin,
Heng-Yu Zhang,
Liang-Wei Zhang
Abstract:
By accurately measuring composition and energy spectrum of cosmic ray, the origin problem of so called "keen" region (energy > 1 PeV) can be solved. However, up to the present, the results of the spectrum in the knee region obtained by several previous experiments have shown obvious differences, so they cannot give effective evidence for judging the theoretical models on the origin of the knee. Re…
▽ More
By accurately measuring composition and energy spectrum of cosmic ray, the origin problem of so called "keen" region (energy > 1 PeV) can be solved. However, up to the present, the results of the spectrum in the knee region obtained by several previous experiments have shown obvious differences, so they cannot give effective evidence for judging the theoretical models on the origin of the knee. Recently, the Large High Altitude Air Shower Observatory (LHAASO) has reported several major breakthroughs and important results in astro-particle physics field. Relying on its advantages of wide-sky survey, high altitude location and large area detector arrays, the research content of LHAASO experiment mainly includes ultra high-energy gamma-ray astronomy, measurement of cosmic ray spectra in the knee region, searching for dark matter and new phenomena of particle physics at higher energy. The electron and Thermal Neutron detector (EN-Detector) is a new scintillator detector which applies thermal neutron detection technology to measure cosmic ray extensive air shower (EAS). This technology is an extension of LHAASO. The EN-Detector Array (ENDA) can highly efficiently measure thermal neutrons generated by secondary hadrons so called "skeleton" of EAS. In this paper, we perform the optimization of ENDA configuration, and obtain expectations on the ENDA results, including thermal neutron distribution, trigger efficiency and capability of cosmic ray composition separation. The obtained real data results are consistent with those by the Monte Carlo simulation.
△ Less
Submitted 23 January, 2024;
originally announced January 2024.
-
Generation of polarized electron beams through self-injection in the interaction of a laser with a pre-polarized plasma
Authors:
L. R. Yin,
X. F. Li,
Y. J. Gu,
N. Cao,
Q. Kong,
M. Buescher,
S. M. Weng,
M. Chen,
Z. M. Sheng
Abstract:
Polarized electron beam production via laser wakefield acceleration in pre-polarized plasma is investigated by particle-in-cell simulations. The evolution of the electron beam polarization is studied based on the Thomas-Bargmann-Michel-Telegdi equation for the transverse and longitudinal self-injection, and the depolarization process is found to be influenced by the injection schemes. In the case…
▽ More
Polarized electron beam production via laser wakefield acceleration in pre-polarized plasma is investigated by particle-in-cell simulations. The evolution of the electron beam polarization is studied based on the Thomas-Bargmann-Michel-Telegdi equation for the transverse and longitudinal self-injection, and the depolarization process is found to be influenced by the injection schemes. In the case of transverse self-injection as found typically in the bubble regime, the spin precession of the accelerated electrons is mainly influenced by the wakefield. However, in the case of longitudinal injection in the quasi-one-dimensional regime (for example, F. Y. Li \emph{et al}., Phys. Rev. Lett. 110, 135002 (2013)), the direction of electron spin oscillates in the laser filed. Since the electrons move around the laser axis, the net influence of the laser field is nearly zero and the contribution of the wakefield can be ignored. Finally, an ultra-short electron beam with polarization of $99\%$ can be obtained using longitudinal self-injection.
△ Less
Submitted 25 November, 2023;
originally announced November 2023.
-
Amide Proton Transfer (APT) imaging in tumor with a machine learning approach using partially synthetic data
Authors:
Malvika Viswanathan,
Leqi Yin,
Yashwant Kurmi,
Zhongliang Zu
Abstract:
Machine learning (ML) has been increasingly used to quantify chemical exchange saturation transfer (CEST) effect. ML models are typically trained using either measured data or fully simulated data. However, training with measured data often lacks sufficient training data, while training with fully simulated data may introduce bias due to limited simulations pools. This study introduces a new platf…
▽ More
Machine learning (ML) has been increasingly used to quantify chemical exchange saturation transfer (CEST) effect. ML models are typically trained using either measured data or fully simulated data. However, training with measured data often lacks sufficient training data, while training with fully simulated data may introduce bias due to limited simulations pools. This study introduces a new platform that combines simulated and measured components to generate partially synthetic CEST data, and to evaluate its feasibility for training ML models to predict amide proton transfer (APT) effect. Partially synthetic CEST signals were created using an inverse summation of APT effects from simulations and the other components from measurements. Training data were generated by varying APT simulation parameters and applying scaling factors to adjust the measured components, achieving a balance between simulation flexibility and fidelity. First, tissue-mimicking CEST signals along with ground truth information were created using multiple-pool model simulations to validate this method. Second, an ML model was trained individually on partially synthetic data, in vivo data, and fully simulated data, to predict APT effect in rat brains bearing 9L tumors. Experiments on tissue-mimicking data suggest that the ML method using the partially synthetic data is accurate in predicting APT. In vivo experiments suggest that our method provides more accurate and robust prediction than the training using in vivo data and fully synthetic data. Partially synthetic CEST data can address the challenges in conventional ML methods.
△ Less
Submitted 13 December, 2023; v1 submitted 2 November, 2023;
originally announced November 2023.
-
Hybrid-VPIC: an Open-Source Kinetic/Fluid Hybrid Particle-in-Cell Code
Authors:
Ari Le,
Adam Stanier,
Lin Yin,
Blake Wetherton,
Brett Keenan,
Brian Albright
Abstract:
Hybrid-VPIC is an extension of the open-source high-performance particle-in-cell (PIC) code VPIC incorporating hybrid kinetic ion/fluid electron solvers. This paper describes the models that are available in the code and gives an overview of applications of the code to space and laboratory plasma physics problems. Particular choices in how the hybrid solvers were implemented are documented for ref…
▽ More
Hybrid-VPIC is an extension of the open-source high-performance particle-in-cell (PIC) code VPIC incorporating hybrid kinetic ion/fluid electron solvers. This paper describes the models that are available in the code and gives an overview of applications of the code to space and laboratory plasma physics problems. Particular choices in how the hybrid solvers were implemented are documented for reference by users. A few solutions for handling numerical complications particular to hybrid codes are also described. Special emphasis is given to the computationally taxing problem of modeling mix in collisional high-energy-density regimes, for which more accurate electron fluid transport coefficients have been implemented for the first time in a hybrid PIC code.
△ Less
Submitted 9 May, 2023;
originally announced May 2023.
-
Cross-beam energy transfer in conditions relevant to direct-drive implosions on OMEGA
Authors:
K. L. Nguyen,
L. Yin,
B. J. Albright,
D. H. Edgell,
R. K. Follett,
D. Turnbull,
D. H. Froula,
J. P. Palastro
Abstract:
In cross-beam energy transfer (CBET), the interference of two laser beams ponderomotively drives an ion-acoustic wave that coherently scatters light from one beam into the other. This redirection of laser beam energy can severely inhibit the performance of direct-drive inertial confinement fusion (ICF) implosions. To assess the role of nonlinear and kinetic processes in direct-drive-relevant CBET,…
▽ More
In cross-beam energy transfer (CBET), the interference of two laser beams ponderomotively drives an ion-acoustic wave that coherently scatters light from one beam into the other. This redirection of laser beam energy can severely inhibit the performance of direct-drive inertial confinement fusion (ICF) implosions. To assess the role of nonlinear and kinetic processes in direct-drive-relevant CBET, the energy transfer between two laser beams in the plasma conditions of an ICF implosion at the OMEGA laser facility was modeled using particle-in-cell simulations. For typical laser beam intensities, the simulations are in excellent agreement with linear kinetic theory, indicating that nonlinear processes do not play a role in direct-drive implosions. At higher intensities, CBET can be modified by pump depletion, backward stimulated Raman scattering, or ion trapping, depending on the plasma density.
△ Less
Submitted 25 April, 2023;
originally announced April 2023.
-
Terahertz reconfigurable multi-functional metamaterials based on 3D printed mortise-tenon structures
Authors:
Bo Yu,
Lesiqi Yin,
Peng Wang,
Cheng Gong
Abstract:
The emergence of metamaterial has provided an unprecedented ability to manipulate electromagnetic waves, especially in the terahertz band where there is a lack of natural response materials. However, most metamaterials are fixed single function due to the fixed structure at the beginning of design. The paper reports a reconfigurable multi-functional terahertz metamaterial with variable structures…
▽ More
The emergence of metamaterial has provided an unprecedented ability to manipulate electromagnetic waves, especially in the terahertz band where there is a lack of natural response materials. However, most metamaterials are fixed single function due to the fixed structure at the beginning of design. The paper reports a reconfigurable multi-functional terahertz metamaterial with variable structures based on mortise and tenon mechanism. And a hybrid 3D printing method based on FDM and E-jet is proposed to fabricate the metamaterials, which simplifies the processing process, improves the speed, and reduces the cost compared to traditional semiconductor processing methods. Through flexible mortise and tenon connections, the metamaterial can achieve: (1) narrowband transmission and broadband absorption; (2) perfect reflection; (3) narrowband reflection and broadband absorption. Relying on ingenious design and processing, the multi-functional metamaterials are expected to be widely used in fields such as electromagnetic shielding, radar stealth, communication and so on.
△ Less
Submitted 10 July, 2023; v1 submitted 4 April, 2023;
originally announced April 2023.
-
Is the Observable Universe Consistent with the Cosmological Principle?
Authors:
Pavan Kumar Aluri,
Paolo Cea,
Pravabati Chingangbam,
Ming-Chung Chu,
Roger G. Clowes,
Damien Hutsemékers,
Joby P. Kochappan,
Alexia M. Lopez,
Lang Liu,
Niels C. M. Martens,
C. J. A. P. Martins,
Konstantinos Migkas,
Eoin Ó Colgáin,
Pratyush Pranav,
Lior Shamir,
Ashok K. Singal,
M. M. Sheikh-Jabbari,
Jenny Wagner,
Shao-Jiang Wang,
David L. Wiltshire,
Shek Yeung,
Lu Yin,
Wen Zhao
Abstract:
The Cosmological Principle (CP) -- the notion that the Universe is spatially isotropic and homogeneous on large scales -- underlies a century of progress in cosmology. It is conventionally formulated through the Friedmann-Lemaître-Robertson-Walker (FLRW) cosmologies as the spacetime metric, and culminates in the successful and highly predictive $Λ$-Cold-Dark-Matter ($Λ$CDM) model. Yet, tensions ha…
▽ More
The Cosmological Principle (CP) -- the notion that the Universe is spatially isotropic and homogeneous on large scales -- underlies a century of progress in cosmology. It is conventionally formulated through the Friedmann-Lemaître-Robertson-Walker (FLRW) cosmologies as the spacetime metric, and culminates in the successful and highly predictive $Λ$-Cold-Dark-Matter ($Λ$CDM) model. Yet, tensions have emerged within the $Λ$CDM model, most notably a statistically significant discrepancy in the value of the Hubble constant, $H_0$. Since the notion of cosmic expansion determined by a single parameter is intimately tied to the CP, implications of the $H_0$ tension may extend beyond $Λ$CDM to the CP itself. This review surveys current observational hints for deviations from the expectations of the CP, highlighting synergies and disagreements that warrant further study. Setting aside the debate about individual large structures, potential deviations from the CP include variations of cosmological parameters on the sky, discrepancies in the cosmic dipoles, and mysterious alignments in quasar polarizations and galaxy spins. While it is possible that a host of observational systematics are impacting results, it is equally plausible that precision cosmology may have outgrown the FLRW paradigm, an extremely pragmatic but non-fundamental symmetry assumption.
△ Less
Submitted 27 February, 2023; v1 submitted 12 July, 2022;
originally announced July 2022.
-
Impact of initial outbreak locations on transmission risk of infectious diseases in an intra-urban area
Authors:
Kang Liu,
Ling Yin,
Jianzhang Xue
Abstract:
Infectious diseases usually originate from a specific location within a city. Due to the heterogenous distribution of population and public facilities, and the structural heterogeneity of human mobility network embedded in space, infectious diseases break out at different locations would cause different transmission risk and control difficulty. This study aims to investigate the impact of initial…
▽ More
Infectious diseases usually originate from a specific location within a city. Due to the heterogenous distribution of population and public facilities, and the structural heterogeneity of human mobility network embedded in space, infectious diseases break out at different locations would cause different transmission risk and control difficulty. This study aims to investigate the impact of initial outbreak locations on the risk of spatiotemporal transmission and reveal the driving force behind high-risk outbreak locations. First, integrating mobile phone location data, we built a SLIR (susceptible-latent-infectious-removed)-based meta-population model to simulate the spreading process of an infectious disease (i.e., COVID-19) across fine-grained intra-urban regions (i.e., 649 communities of Shenzhen City, China). Based on the simulation model, we evaluated the transmission risk caused by different initial outbreak locations by proposing three indexes including the number of infected cases (CaseNum), the number of affected regions (RegionNum), and the spatial diffusion range (SpatialRange). Finally, we investigated the contribution of different influential factors to the transmission risk via machine learning models. Results indicates that different initial outbreak locations would cause similar CaseNum but different RegionNum and SpatialRange. To avoid the epidemic spread quickly to more regions, it is necessary to prevent epidemic breaking out in locations with high population-mobility flow density. While to avoid epidemic spread to larger spatial range, remote regions with long daily trip distance of residents need attention. Those findings can help understand the transmission risk and driving force of initial outbreak locations within cities and make precise prevention and control strategies in advance.
△ Less
Submitted 23 March, 2022;
originally announced April 2022.
-
Heteroepitaxy of Large-Area, Monocrystalline Lead Halide Perovskite Films on Gallium Arsenide
Authors:
Deying Kong,
Yu Zhang,
Dali Cheng,
Enze Wang,
Kaiyuan Zhang,
Huachun Wang,
Kai Liu,
Lan Yin,
Xing Sheng
Abstract:
Lead halide perovskite materials have been emerging as promising candidates for high-performance optoelectronic devices. Significant efforts have sought to realize monocrystalline perovskite films at a large scale. Here, we epitaxially grow monocrystalline methylammonium lead tribromide (MAPbBr3) films on lattice-matched gallium arsenide (GaAs) substrates at a centimeter scale. In particular, a so…
▽ More
Lead halide perovskite materials have been emerging as promising candidates for high-performance optoelectronic devices. Significant efforts have sought to realize monocrystalline perovskite films at a large scale. Here, we epitaxially grow monocrystalline methylammonium lead tribromide (MAPbBr3) films on lattice-matched gallium arsenide (GaAs) substrates at a centimeter scale. In particular, a solution-processed lead(II) sulfide (PbS) layer provides a lattice-matched and chemical protective interface for the solid-gas reaction to form MAPbBr3 films on GaAs. Structure characterizations identify the crystal orientations in the trilayer MAPbBr3/PbS/GaAs epi-structure and confirm the monocrystalline nature of MAPbBr3 on PbS/GaAs. The dynamic evolution of surface morphologies during the growth indicates a two-step epitaxial process. These fundamental understandings and practical growth techniques offer a viable guideline to approach high-quality perovskite films for previously inaccessible applications.
△ Less
Submitted 3 February, 2022;
originally announced February 2022.
-
Ultrathin All-Angle Hyperbolic Metasurface Retroreflectors Based on Directed Routing of Canalized Plasmonics
Authors:
Li-Zheng Yin,
Jin Zhao,
Ming-Zhe Chong,
Feng-Yuan Han,
Pu-Kun Liu
Abstract:
Retroreflectors that can accurately redirect the incident wave in free space back along its original channel provide unprecedented opportunities for light manipulation in wireless communication. However, to the best of our knowledge, the existing methods of designing retroreflectors suffer from either the bulky size, narrow angular bandwidth, or time-consuming post-processing. Here, a scheme of de…
▽ More
Retroreflectors that can accurately redirect the incident wave in free space back along its original channel provide unprecedented opportunities for light manipulation in wireless communication. However, to the best of our knowledge, the existing methods of designing retroreflectors suffer from either the bulky size, narrow angular bandwidth, or time-consuming post-processing. Here, a scheme of designing ultrathin and all-angle retroreflectors based on hyperbolic plasmonic metasurfaces is proposed and experimentally demonstrated. The physical mechanism underlying this scheme is the high-efficiency all-angle transition between the traveling waves in free space and the canalized spoof surface plasmon (SSP) on the hyperbolic plasmonic metasurfaces (HPMs). In this case, the strong confinement characteristic benefited from the enhanced light-matter interaction enables us to route and retroreflect the canalized SSP with extremely ultrathin structures. As proof of the scheme, a retroreflector prototype with a thickness approximately equal to the central wavelength is designed and fabricated. Further experimental investigation obtains a maximum efficiency of 83.2% and a half-power field of view up to 53°. This scheme can find promising applications in target detection, remote sensing, and diverse on-chip light control devices.
△ Less
Submitted 10 January, 2022;
originally announced January 2022.
-
Terahertz non-label subwavelength imaging with composite photonics-plasmonics structured illumination
Authors:
Jin Zhao,
Li-Zheng Yin,
Feng-Yuan Han,
Yi-Dong Wang,
Tie-Jun Huang,
Chao-Hai Du,
Pu-Kun Liu
Abstract:
Inspired by the capability of structured illumination microscopy in subwavelength imaging, many researchers devoted themselves to investigating this methodology. However, due to the free propagating feature of the traditional structured illumination fields, the resolution can be only improved up to double times compared with the diffractied limited microscopy. Besides, most of the previous studies…
▽ More
Inspired by the capability of structured illumination microscopy in subwavelength imaging, many researchers devoted themselves to investigating this methodology. However, due to the free propagating feature of the traditional structured illumination fields, the resolution can be only improved up to double times compared with the diffractied limited microscopy. Besides, most of the previous studies, relying on incoherent illumination sources, are restricted to fluorescent samples. In this work, a subwavelength nonfluorescent imaging method is proposed based on the terahertz traveling wave and plasmonics illumination. Excited along with a metal grating, the spoof surface plasmons are employed as the plasmonics illumination. When the scattering waves with the SSPs illumination are captured, the high order spatial frequency components of the sample are already encoded into the obtainable low order ones. Then, an algorithm is summarized to shift the modulated SF components to their actual positions in the Fourier domain. In this manner, high order SF components carrying the fine information are introduced to reconstruct the desired imaging, leading to an improvement of the resolution up to 0.12 lambda. Encouragingly, the resolution can be further enhanced by tuning the working frequency of the SSPs. This method holds promise for some important applications in terahertz nonfluorescent microscopy and sample detection with weak scattering.
△ Less
Submitted 19 June, 2021;
originally announced June 2021.
-
Investigating Degradation Modes in Zn-AgO Aqueous Batteries with $\textit{In-Situ}$ X-ray Micro Computed Tomography
Authors:
Jonathan Scharf,
Lu Yin,
Christopher Redquest,
Ruixiao Liu,
Xueying L. Quinn,
Jeff Ortega,
Xia Wei,
Joseph Wang,
Jean-Marie Doux,
Ying Shirley Meng
Abstract:
To meet growing energy demands, degradation mechanisms of energy storage devices must be better understood. As a non-destructive tool, X-ray Computed Tomography (CT) has been increasingly used by the battery community to perform $\textit{in-situ}$ experiments that can investigate dynamic phenomena. However, few have used X-ray CT to study representative battery systems over long cycle lifetimes (>…
▽ More
To meet growing energy demands, degradation mechanisms of energy storage devices must be better understood. As a non-destructive tool, X-ray Computed Tomography (CT) has been increasingly used by the battery community to perform $\textit{in-situ}$ experiments that can investigate dynamic phenomena. However, few have used X-ray CT to study representative battery systems over long cycle lifetimes (>100 cycles). Here, we report the $\textit{in-situ}$ CT study of Zn-Ag batteries and demonstrate the effects of current collector parasitic gassing over long-term storage and cycling. We design performance representative $\textit{in-situ}$ CT cells that can achieve >250 cycles at a high areal capacity of $\mathrm{12.5\;mAh/cm^2}$. Combined with electrochemical experiments, the effects of current collector parasitic gassing are revealed with micro-scale CT (MicroCT). The volume expansion and evolution of ZnO and Zn depletion is quantified with cycling and elevated temperature testing. The experimental insights are then utilized to develop larger form-factor $\mathrm{4\;cm^2}$ cells with electrochemically compatible current collectors. With this, we demonstrate over 325 cycles at a high capacity of $\mathrm{12.5\;mAh/cm^2}$ for a $\mathrm{4\;cm^2}$ form-factor. This work demonstrates that $\textit{in-situ}$ X-ray CT used in long cycle-lifetime studies can be applied to examine a multitude of other battery chemistries to improve their performances.
△ Less
Submitted 7 May, 2021;
originally announced May 2021.
-
Cross-beam energy transfer saturation by ion trapping-induced detuning
Authors:
K. L. Nguyen,
L. Yin,
B. J. Albright,
A. M. Hansen,
D. H. Froula,
D. Turnbull,
R. K. Follett,
J. P. Palastro
Abstract:
The performance of direct-drive inertial confinement fusion implosions relies critically on the coupling of laser energy to the target plasma. Cross-beam energy transfer (CBET), the resonant exchange of energy between intersecting laser beams mediated by ponderomotively driven ion-acoustic waves (IAW), inhibits this coupling by scattering light into unwanted directions. The variety of beam interse…
▽ More
The performance of direct-drive inertial confinement fusion implosions relies critically on the coupling of laser energy to the target plasma. Cross-beam energy transfer (CBET), the resonant exchange of energy between intersecting laser beams mediated by ponderomotively driven ion-acoustic waves (IAW), inhibits this coupling by scattering light into unwanted directions. The variety of beam intersection angles and varying plasma conditions in an implosion results in IAWs with a range of phase velocities. Here we show that CBET saturates through a resonance detuning that depends on the IAW phase velocity and that results from trapping-induced modifications to the ion distribution functions. For smaller phase velocities, the modifications to the distribution functions can rapidly thermalize in the presence of mid-Z ions, leading to a blueshift in the resonant frequency. For larger phase velocities, the modifications can persist, leading to a redshift in the resonant frequency. Ultimately, these results may reveal pathways towards CBET mitigation and inform reduced models for radiation hydrodynamics codes to improve their predictive capability.
△ Less
Submitted 15 April, 2021;
originally announced April 2021.
-
Construction and On-site Performance of the LHAASO WFCTA Camera
Authors:
F. Aharonian,
Q. An,
Axikegu,
L. X. Bai,
Y. X. Bai,
Y. W. Bao,
D. Bastieri,
X. J. Bi,
Y. J. Bi,
H. Cai,
J. T. Cai,
Z. Cao,
Z. Cao,
J. Chang,
J. F. Chang,
X. C. Chang,
B. M. Chen,
J. Chen,
L. Chen,
L. Chen,
L. Chen,
M. J. Chen,
M. L. Chen,
Q. H. Chen,
S. H. Chen
, et al. (234 additional authors not shown)
Abstract:
The focal plane camera is the core component of the Wide Field-of-view Cherenkov/fluorescence Telescope Array (WFCTA) of the Large High-Altitude Air Shower Observatory (LHAASO). Because of the capability of working under moonlight without aging, silicon photomultipliers (SiPM) have been proven to be not only an alternative but also an improvement to conventional photomultiplier tubes (PMT) in this…
▽ More
The focal plane camera is the core component of the Wide Field-of-view Cherenkov/fluorescence Telescope Array (WFCTA) of the Large High-Altitude Air Shower Observatory (LHAASO). Because of the capability of working under moonlight without aging, silicon photomultipliers (SiPM) have been proven to be not only an alternative but also an improvement to conventional photomultiplier tubes (PMT) in this application. Eighteen SiPM-based cameras with square light funnels have been built for WFCTA. The telescopes have collected more than 100 million cosmic ray events and preliminary results indicate that these cameras are capable of working under moonlight. The characteristics of the light funnels and SiPMs pose challenges (e.g. dynamic range, dark count rate, assembly techniques). In this paper, we present the design features, manufacturing techniques and performances of these cameras. Finally, the test facilities, the test methods and results of SiPMs in the cameras are reported here.
△ Less
Submitted 4 July, 2021; v1 submitted 29 December, 2020;
originally announced December 2020.
-
Constructing Hyperbolic Metamaterials with Arbitrary Medium
Authors:
Li-Zheng Yin,
Feng-Yuan Han,
Jin Zhao,
Di Wang,
Tie-Jun Huang,
Pu-Kun Liu
Abstract:
Recent advances in hyperbolic metamaterials have spurred many breakthroughs in the field of manipulating light propagation. However, the unusual electromagnetic properties also put extremely high demands on its compositional materials. Limited by the finite relative permittivity of the natural materials, the effective permittivity of the constructed hyperbolic metamaterials is also confined to a n…
▽ More
Recent advances in hyperbolic metamaterials have spurred many breakthroughs in the field of manipulating light propagation. However, the unusual electromagnetic properties also put extremely high demands on its compositional materials. Limited by the finite relative permittivity of the natural materials, the effective permittivity of the constructed hyperbolic metamaterials is also confined to a narrow range. Here, based on the proposed concept of structure-induced spoof surface plasmon, we prove that arbitrary materials can be selected to construct the hyperbolic metamaterials with independent relative effective permittivity components. Besides, the theoretical achievable ranges of the relative effective permittivity components are unlimited. As proofs of the method, three novel hyperbolic metamaterials are designed with their functionalities validated numerically and experimentally by specified directional propagation. To further illustrate the superiority of the method, an all-metal low-loss hyperbolic metamaterial filled with air is proposed and demonstrated. The proposed methodology effectively reduces the design requirement for hyperbolic metamaterials and provides new ideas for the scenarios where large permittivity coverage is needed such as microwave and terahertz focus, super-resolution imaging, electromagnetic cloaking, and so on.
△ Less
Submitted 17 November, 2020;
originally announced December 2020.
-
Bifunctional Luneburg-fisheye Lens Based on the Manipulation of Spoof Surface Plasmons
Authors:
Jin Zhao,
Yi-Dong Wang,
Li-Zheng Yin,
Feng-Yuan Han,
Tie-Jun Huang,
Pu-Kun Liu
Abstract:
Manipulation of spoof surface plasmons (SSPs) has recently intrigued enormous interest due to the capability of guiding waves with subwavelength footsteps. However, most of the previous studies, manifested for a single functionality, are not suitable for multifunctional integrated devices. Herein, a bifunctional Luneburg-fisheye lens is proposed based on a two-dimension metal pillar array. Firstly…
▽ More
Manipulation of spoof surface plasmons (SSPs) has recently intrigued enormous interest due to the capability of guiding waves with subwavelength footsteps. However, most of the previous studies, manifested for a single functionality, are not suitable for multifunctional integrated devices. Herein, a bifunctional Luneburg-fisheye lens is proposed based on a two-dimension metal pillar array. Firstly, by tuning the geometric dimension of the metal pillars in the array, its ability to precisely manipulate the excited SSPs along one direction is confirmed, achieving subwavelength focusing and imaging with the resolution up to 0.14 times the wavelength. Then, separately controlling the propagation of the SSPs along the orthotropic directions is further implemented, and the bifunctional Luneburg-fisheye lens is realized. The bifunctional lens is characterized as a Luneburg one along the x-axis, whereas in the y-axis, it presents the properties of a Maxwell fisheye lens. The experimental results almost immaculately match with the simulation ones. This bifunctional lens can validly reduce the system complexity and exert flexibility in multifunctional applications, while the proposed metal pillar-based design method broadens the application range of gradient refractive-index lens in the microwaves, terahertz, and even optical ranges.
△ Less
Submitted 7 December, 2020;
originally announced December 2020.
-
Self-Amplification of Coherent Energy Modulation in Seeded Free-Electron Lasers
Authors:
Jiawei Yan,
Zhangfeng Gao,
Zheng Qi,
Kaiqing Zhang,
Kaishang Zhou,
Tao Liu,
Si Chen,
Chao Feng,
Chunlei Li,
Lie Feng,
Taihe Lan,
Wenyan Zhang,
Xingtao Wang,
Xuan Li,
Zenggong Jiang,
Baoliang Wang,
Zhen Wang,
Duan Gu,
Meng Zhang,
Haixiao Deng,
Qiang Gu,
Yongbin Leng,
Lixin Yin,
Bo Liu,
Dong Wang
, et al. (1 additional authors not shown)
Abstract:
The spectroscopic techniques for time-resolved fine analysis of matter require coherent X-ray radiation with femtosecond duration and high average brightness. Seeded free-electron lasers (FELs), which use the frequency up-conversion of an external seed laser to improve temporal coherence, are ideal for providing fully coherent soft X-ray pulses. However, it is difficult to operate seeded FELs at a…
▽ More
The spectroscopic techniques for time-resolved fine analysis of matter require coherent X-ray radiation with femtosecond duration and high average brightness. Seeded free-electron lasers (FELs), which use the frequency up-conversion of an external seed laser to improve temporal coherence, are ideal for providing fully coherent soft X-ray pulses. However, it is difficult to operate seeded FELs at a high repetition rate due to the limitations of present state-of-the-art laser systems. Here, we report the novel self-modulation method for enhancing laser-induced energy modulation, thereby significantly reducing the requirement of an external laser system. Driven by this scheme, we experimentally realize high harmonic generation in a seeded FEL using an unprecedentedly small energy modulation. An electron beam with a laser-induced energy modulation as small as 1.8 times the slice energy spread is used for lasing at the 7th harmonic of a 266-nm seed laser in a single-stage high-gain harmonic generation (HGHG) setup and the 30th harmonic of the seed laser in a two-stage HGHG setup. The results mark a major step towards a high-repetition-rate, fully coherent X-ray FEL.
△ Less
Submitted 11 February, 2021; v1 submitted 2 November, 2020;
originally announced November 2020.
-
High-order multipoles in all-dielectric metagrating enabling ultralarge-angle light bending with unity efficiency
Authors:
Tie-Jun Huang,
Li-Zheng Yin,
Jin Zhao,
Chao-Hai Du,
Pu-Kun Liu
Abstract:
Gradient metasurfaces have been extensively applied in recent years for enabling an unprecedented control of light beam over thin optical components. However, these metasurfaces suffer from low efficiency when it comes to bending light with large angle and high fabrication demand when it requires fine discretion. In this work, we investigate the all-dielectric metagrating based on mie-type resonan…
▽ More
Gradient metasurfaces have been extensively applied in recent years for enabling an unprecedented control of light beam over thin optical components. However, these metasurfaces suffer from low efficiency when it comes to bending light with large angle and high fabrication demand when it requires fine discretion. In this work, we investigate the all-dielectric metagrating based on mie-type resonances interference, allowing extraordinary optical diffraction for beam steering with ultralarge angle. It is found that the coupling inside and among lattice of metagrating can tune the exciting state of electric and magnetic resonances including both fundamental dipoles and high-order multipoles, leading to ideal asymmetrical scattering pattern for redistributing the energy between the diffraction channels at will. The participation of quadrupole and hexapole not only significantly enhance the working efficiency, but also bring distinctive possibilities for wave manipulation which cannot be reached by dipoles. Utilizing a thin array of silicon rods, large-angle negative refraction and reflection are demonstrated with almost unity efficiency under both polarizations. Compared with conventional metasurfaces, such an all-dielectric mategrating has the merits of high flexibility, high efficiency and low fabrication demand. The strong coupling and prosperous interactions among multipoles may behave as a cornerstone for broad range of wavefront control and offer an effective solution for various on-chip optical wave control such as bending, focusing, filtering and sensing.
△ Less
Submitted 21 October, 2020;
originally announced October 2020.
-
Loophole-free plug-and-play quantum key distribution
Authors:
Ruoyang Qi,
Haoran Zhang,
Jiancun Gao,
Liuguo Yin,
Gui-Lu Long
Abstract:
Robust, simple, and flexible quantum key distribution (QKD) is vital for realising practical applications of this technique. Contrary to typical phase-coded QKD schemes, the plug-and-play QKD design requires only one arm-length-insensitive interferometer without active feedback, in which the noise is automatically compensated by the two-way structure. However, there are certain possible loopholes…
▽ More
Robust, simple, and flexible quantum key distribution (QKD) is vital for realising practical applications of this technique. Contrary to typical phase-coded QKD schemes, the plug-and-play QKD design requires only one arm-length-insensitive interferometer without active feedback, in which the noise is automatically compensated by the two-way structure. However, there are certain possible loopholes in the typical plug-and-play designs, which require consideration and strict monitoring. This study proposes a loophole-free plug-and-play QKD scheme with two-way protocol and presents an experimental demonstration of said scheme. The security is analysed under a collective attack scenario assisted by the decoy state method. The scheme was implemented in a 50.4 km commercial fibre without active feedback. The system showed highly robust performance with an ultra-low error rate and maintained an ultra-high visibility of 0.9947+/-0.0002 through significant environmental changes over 24 hours.
△ Less
Submitted 4 January, 2021; v1 submitted 12 October, 2020;
originally announced October 2020.
-
Parallel finite volume simulation of the spherical shell dynamo with pseudo-vacuum magnetic boundary conditions
Authors:
Liang Yin,
Chao Yang,
Shi-Zhuang Ma,
Ying Cai,
Keke Zhang
Abstract:
In this paper, we study the parallel simulation of the magnetohydrodynamic (MHD) dynamo in a rapidly rotating spherical shell with pseudo-vacuum magnetic boundary conditions. A second-order finite volume scheme based on a collocated quasi-uniform cubed-sphere grid is applied to the spatial discretization of the MHD dynamo equations. To ensure the solenoidal condition of the magnetic field, we adop…
▽ More
In this paper, we study the parallel simulation of the magnetohydrodynamic (MHD) dynamo in a rapidly rotating spherical shell with pseudo-vacuum magnetic boundary conditions. A second-order finite volume scheme based on a collocated quasi-uniform cubed-sphere grid is applied to the spatial discretization of the MHD dynamo equations. To ensure the solenoidal condition of the magnetic field, we adopt a widely-used approach whereby a pseudo-pressure is introduced into the induction equation. The temporal integration is split by a second-order approximate factorization approach, resulting in two linear algebraic systems both solved by a preconditioned Krylov subspace iterative method. A multi-level restricted additive Schwarz preconditioner based on domain decomposition and multigrid method is then designed to improve the efficiency and scalability. Accurate numerical solutions of two benchmark cases are obtained with our code, comparable to the existing local method results. Several large-scale tests performed on the Sunway TaihuLight supercomputer show good strong and weak scalabilities and a noticeable improvement from the multi-level preconditioner with up to 10368 processor cores.
△ Less
Submitted 13 December, 2021; v1 submitted 4 September, 2020;
originally announced September 2020.
-
High Performance Printed AgO-Zn Rechargeable Battery for Flexible Electronics
Authors:
Lu Yin,
Jonathan Scharf,
Jessica Ma,
Jean-Marie Doux,
Christopher Redquest,
Viet Le,
Yin Yijie,
Jeff Ortega,
Xia Wei,
Joseph Wang,
Ying Shirley Meng
Abstract:
The rise of flexible electronics calls for cost-effective and scalable batteries with good mechanical and electrochemical performance. In this work, we developed printable, polymer-based AgO-Zn batteries that feature flexibility, rechargeability, high areal capacity, and low impedance. Using elastomeric substrate and binders, the current collectors, electrodes, and separators can be easily screen-…
▽ More
The rise of flexible electronics calls for cost-effective and scalable batteries with good mechanical and electrochemical performance. In this work, we developed printable, polymer-based AgO-Zn batteries that feature flexibility, rechargeability, high areal capacity, and low impedance. Using elastomeric substrate and binders, the current collectors, electrodes, and separators can be easily screen-printed layer-by-layer and vacuum-sealed in a stacked configuration. The batteries are customizable in sizes and capacities, with the highest obtained areal capacity of 54 mAh/cm2 for primary applications. Advanced micro-CT and EIS were used to characterize the battery, whose mechanical stability was tested with repeated twisting and bending. The batteries were used to power a flexible E-ink display system that requires a high-current drain and exhibited superior performance than commercial coin-cell batteries. The developed battery presents a practical solution for powering a wide range of electronics and holds major implications for the future development of practical and high-performance flexible batteries.
△ Less
Submitted 31 August, 2020;
originally announced September 2020.
-
Creating QED Photon Jets with Present-Day Lasers
Authors:
Scott V. Luedtke,
Lin Yin,
Lance A. Labun,
Ou Z. Labun,
B. J. Albright,
Robert F. Bird,
W. D. Nystrom,
Björn Manuel Hegelich
Abstract:
Large-scale, relativistic particle-in-cell simulations with quantum electrodynamics (QED) models show that high energy (1$<E_γ\lesssim$ 75 MeV) QED photon jets with a flux of $10^{12}$ sr$^{-1}$ can be created with present-day lasers and planar, unstructured targets. This process involves a self-forming channel in the target in response to a laser pulse focused tightly ($f$ number unity) onto the…
▽ More
Large-scale, relativistic particle-in-cell simulations with quantum electrodynamics (QED) models show that high energy (1$<E_γ\lesssim$ 75 MeV) QED photon jets with a flux of $10^{12}$ sr$^{-1}$ can be created with present-day lasers and planar, unstructured targets. This process involves a self-forming channel in the target in response to a laser pulse focused tightly ($f$ number unity) onto the target surface. We show the self-formation of a channel to be robust to experimentally motivated variations in preplasma, angle of incidence, and laser stability, and present in simulations using historical shot data from the Texas Petawatt. We estimate that a detectable photon flux in the 10s of MeV range will require about 60 J in a 150 fs pulse.
△ Less
Submitted 15 September, 2021; v1 submitted 24 June, 2020;
originally announced June 2020.
-
Hyperbolic spoof plasmons in layered equivalent graphene metasurfaces
Authors:
Li-Zheng Yin,
Tie-Jun Huang,
Di Wang,
Pu-Kun Liu
Abstract:
Advances in graphene plasmonics offer numerous opportunities for enabling the design and manufacture of a variety of nanoelectronics and other exciting optical devices. However, due to the limitation of material properties, its operating frequency cannot drop to the microwave range. In this work, a new concept of microwave equivalent graphene based on the ultrathin monolayer plasmonic metasurface…
▽ More
Advances in graphene plasmonics offer numerous opportunities for enabling the design and manufacture of a variety of nanoelectronics and other exciting optical devices. However, due to the limitation of material properties, its operating frequency cannot drop to the microwave range. In this work, a new concept of microwave equivalent graphene based on the ultrathin monolayer plasmonic metasurface is proposed and demonstrated. Based on this concept, elliptical and hyperbolic dispersion can be theoretically obtained by stacking the equivalent graphene metasurfaces periodically. As proofs of the concept and method, an elliptical and an all-metal hyperbolic metamaterial are designed and numerically demonstrated. As a specified realization of the method, a practical hyperbolic metamaterial is fabricated and experimentally investigated with its validity verified by the directional propagation and photonic spin Hall effect. Furthermore, to investigate the validity of the method under extreme parameter conditions, a proof-of-concept hyperlens is designed and fabricated, with its near-field resolution of 0.05$λ$ experimentally verified. Based on the proposed concept, diverse optical graphene metamaterials such as focusing lens, dispersion-dependent directional couplers, and epsilon-near-zero materials can also be realized in the microwave regime.
△ Less
Submitted 12 June, 2020;
originally announced June 2020.
-
Ghost Imaging with the Optimal Binary Sampling
Authors:
Dongyue Yang,
Guohua Wu,
Bin Luo,
Longfei Yin
Abstract:
To extract the maximum information about the object from a series of binary samples in ghost imaging applications, we propose and demonstrate a framework for optimizing the performance of ghost imaging with binary sampling to approach the results without binarization. The method is based on maximizing the information content of the signal arm detection, by formulating and solving the appropriate p…
▽ More
To extract the maximum information about the object from a series of binary samples in ghost imaging applications, we propose and demonstrate a framework for optimizing the performance of ghost imaging with binary sampling to approach the results without binarization. The method is based on maximizing the information content of the signal arm detection, by formulating and solving the appropriate parameter estimation problem - finding the binarization threshold that would yield the reconstructed image with optimal Fisher information properties. Applying the 1-bit quantized Poisson statistics to a ghost-imaging model with pseudo-thermal light, we derive the fundamental limit, i.e., the Cramer-Rao lower bound, as the benchmark for the evaluation of the accuracy of the estimator. Our theoertical model and experimental results suggest that, with the optimal binarization threshold, coincident with the statistical mean of all bucket samples, and large number of measurements, the performance of binary sampling GI can approach that of the ordinary one without binarization.
△ Less
Submitted 11 March, 2020;
originally announced March 2020.
-
Polar Rectification Effect in Electro-Fatigued SrTiO3 Based Junctions
Authors:
Xueli Xu,
Hui Zhang,
Zhicheng Zhong,
Ranran zhang,
Lihua Yin,
Yuping Sun,
Haoliang Huang,
Yalin Lu,
Yi Lu,
Chun Zhou,
Zongwei Ma,
Lei Shen,
Junsong Wang,
Jiandong Guo,
Jirong Sun,
Zhigao Sheng
Abstract:
Rectifying semiconductor junctions are crucial to electronic devices. They convert alternating current into direct one by allowing unidirectional charge flows. In analogy to the current-flow rectification for itinerary electrons, here, a polar rectification that based on the localized oxygen vacancies (OVs) in a Ti/fatigued-SrTiO3 (fSTO) Schottky junction is first demonstrated. The fSTO with OVs i…
▽ More
Rectifying semiconductor junctions are crucial to electronic devices. They convert alternating current into direct one by allowing unidirectional charge flows. In analogy to the current-flow rectification for itinerary electrons, here, a polar rectification that based on the localized oxygen vacancies (OVs) in a Ti/fatigued-SrTiO3 (fSTO) Schottky junction is first demonstrated. The fSTO with OVs is produced by an electro-degradation process. The different movability of localized OVs and itinerary electrons in the fSTO yield a unidirectional electric polarization at the interface of the junction under the coaction of external and built-in electric fields. Moreover, the fSTO displays a pre-ferroelectric state located between paraelectric and ferroelectric phases. The pre-ferroelectric state has three sub-states and can be easily driven into a ferroelectric state by external electric field. These observations open up opportunities for potential polar devices and may underpin many useful polar-triggered electronic phenomena.
△ Less
Submitted 6 January, 2020;
originally announced March 2020.
-
Amplifying Evanescent Waves by Dispersion-induced Plasmons: Defying the Materials Limitation of Superlens
Authors:
Tie-Jun Huang,
Li-Zheng Yin,
Jin Zhao,
Chao-Hai Du,
Pu-Kun Liu
Abstract:
Breaking the diffraction limit is always an appealing topic due to the urge for a better imaging resolution in almost all areas. As an effective solution, the superlens based on the plasmonic effect can resonantly amplify evanescent waves, and achieve subwavelength resolution. However, the natural plasmonic materials, within their limited choices, usually have inherit high losses and are only avai…
▽ More
Breaking the diffraction limit is always an appealing topic due to the urge for a better imaging resolution in almost all areas. As an effective solution, the superlens based on the plasmonic effect can resonantly amplify evanescent waves, and achieve subwavelength resolution. However, the natural plasmonic materials, within their limited choices, usually have inherit high losses and are only available from the infrared to visible wavelengths. In this work, we have theoretically and experimentally demonstrated that the arbitrary materials, even air, can be used to enhance evanescent waves and build low loss superlens with at the desired frequency. The operating mechanisms reside in the dispersion-induced effective plasmons in a bounded waveguide structure. Based on this, we constructed the hyperbolic metamaterials and experimentally verified its validity in the microwave range by the directional propagation and imaging with a resolution of 0.087 wavelength. We have also demonstrated that the imaging potential can be extended to terahertz and infrared bands. The proposed method can break the conventional barriers of plasmon-based lenses and bring new possibilities to the field of superresolution imaging from microwave to infrared wavelengths.
△ Less
Submitted 27 April, 2020; v1 submitted 7 November, 2019;
originally announced November 2019.
-
Terahertz dual phase gradient metasurface: high-efficiency binary-channel spoof surface plasmon excitation
Authors:
Li-Zheng Yin,
Tie-Jun Huang,
Di Wang,
Jiang-Yu Liu,
Pu-Kun Liu
Abstract:
Spoof surface plasmon meta-couplers are compact antennas which link propagating waves and surface waves. However, most of them are designed with a fixed phase gradient and channel for the incident waves with specific polarization, which limits their further applications in multichannel scenarios. In this Letter, we propose, to the best of our knowledge, a new method that combines the Brillouin fol…
▽ More
Spoof surface plasmon meta-couplers are compact antennas which link propagating waves and surface waves. However, most of them are designed with a fixed phase gradient and channel for the incident waves with specific polarization, which limits their further applications in multichannel scenarios. In this Letter, we propose, to the best of our knowledge, a new method that combines the Brillouin folds theory with the Generalized Snell Law. We demonstrate that when the phase gradient of the metasurface is large enough, Brillouin folds effect will occur, which will create dual phase gradient space in a single metasurface. With this method, we design two novel terahertz meta-couplers with functionalities of symmetrical and asymmetrical binary-channel/bidirectional SSP excitation. Furthermore, finite element method (FEM) simulations are performed to demonstrate their functionalities. Considering the orthogonality of the incident waves, there can be a total of four independent space channels to excite SSP on one metasurface. This work may open up new routes in multi-channel SSP meta-couplers and multi-beam surface wave antennas.
△ Less
Submitted 13 October, 2019;
originally announced October 2019.
-
Far-field subwavelength resolution imaging by spatial spectrum sampling
Authors:
Tie-Jun Huang,
Li-Zheng Yin,
Ya Shuang,
Jiang-Yu Liu,
Yunhua Tan,
Pu-Kun Liu
Abstract:
Imaging below the diffraction limit is always a public interest because of the restricted resolution of conventional imaging systems. To beat the limit, evanescent harmonics decaying in space must participate in the imaging process. Here, we introduce the method of spatial spectrum sampling, a novel far-field superresolution imaging method for microwave and terahertz regime. Strong dispersion and…
▽ More
Imaging below the diffraction limit is always a public interest because of the restricted resolution of conventional imaging systems. To beat the limit, evanescent harmonics decaying in space must participate in the imaging process. Here, we introduce the method of spatial spectrum sampling, a novel far-field superresolution imaging method for microwave and terahertz regime. Strong dispersion and momentum conservation allow the spoof surface plasmon polaritons (SSP) structure to become a sensitive probe for spatial harmonics. This enables that the spatial information of the targets including both propagating and evanescent components, can be extracted by tuning and recording SSP in the far field. Then, the subwavelength resolution is constructed by the inversed Fourier transform of the sampled spatial spectrum. Using the modified subwavelength metallic grating as the spoof plasmonic structure, a far-field resolution of 0.17 wavelength is numerically and experimentally verified, and two-dimensional imaging ability is also fully discussed. The imaging ability and flexibility can be further optimizing the SSP structures. We are confident that our working mechanism will have great potentials in the superresolution imaging applications in the microwave and terahertz frequency range
△ Less
Submitted 6 July, 2019; v1 submitted 21 May, 2019;
originally announced May 2019.
-
Bound-State Band Reconstruction and Resonance in Spin-1/2 Bose Gas with 1D Spin-Orbit Coupling
Authors:
Qi Gu,
Yuncheng Xiong,
Lan Yin
Abstract:
In this work, we study two-body bound states in two-component Bose gas with a one-dimensional (1D) spin-orbit coupling (SOC) induced by Raman lasers. The finite Raman coupling strength generates coupling among three spin channels, resulting in the reconstruction of three bound-state bands. In addition, multiple resonances can be induced at finite scattering lengths. By tuning the interaction in on…
▽ More
In this work, we study two-body bound states in two-component Bose gas with a one-dimensional (1D) spin-orbit coupling (SOC) induced by Raman lasers. The finite Raman coupling strength generates coupling among three spin channels, resulting in the reconstruction of three bound-state bands. In addition, multiple resonances can be induced at finite scattering lengths. By tuning the interaction in one intra-species channel, one bound-state band can be lifted and three resonances can be achieved at different center-of-mass momenta, which can be observable under current experimental conditions in ${}^{87}$Rb atoms.
△ Less
Submitted 10 May, 2019;
originally announced May 2019.
-
Laser-Plasma Interactions Enabled by Emerging Technologies
Authors:
J. P. Palastro,
F. Albert,
B. Albright,
T. M. Antonsen Jr.,
A. Arefiev,
J. Bates,
R. Berger,
J. Bromage,
M. Campbell,
T. Chapman,
E. Chowdhury,
A. Colaïtis,
C. Dorrer,
E. Esarey,
F. Fiúza,
N. Fisch,
R. Follett,
D. Froula,
S. Glenzer,
D. Gordon,
D. Haberberger,
B. M. Hegelich,
T. Jones,
D. Kaganovich,
K. Krushelnick
, et al. (29 additional authors not shown)
Abstract:
An overview from the past and an outlook for the future of fundamental laser-plasma interactions research enabled by emerging laser systems.
An overview from the past and an outlook for the future of fundamental laser-plasma interactions research enabled by emerging laser systems.
△ Less
Submitted 30 April, 2019;
originally announced April 2019.
-
The expectation of cosmic ray proton and helium energy spectrum below 4 PeV measured by LHAASO
Authors:
L. Q. Yin,
S. S. Zhang,
Z. Cao,
B. Y. Bi,
C. Wang,
J. L. Liu,
L. L. Ma,
M. J. Yang,
Tiina Suomijarvi,
Y. Zhang,
Z. Y. You,
Z. Z Zong
Abstract:
Large High Altitude Air Shower Observatory(LHAASO) is a composite cosmic ray observatory consisting of three detector arrays: kilometer square array (KM2A) which includes the electromagnetic detector array and muon detector array, water Cherenkov detector array (WCDA) and wide field of view Cherenkov telescope array (WFCTA). One of the main scientific objectives of LHAASO is to precisely measure t…
▽ More
Large High Altitude Air Shower Observatory(LHAASO) is a composite cosmic ray observatory consisting of three detector arrays: kilometer square array (KM2A) which includes the electromagnetic detector array and muon detector array, water Cherenkov detector array (WCDA) and wide field of view Cherenkov telescope array (WFCTA). One of the main scientific objectives of LHAASO is to precisely measure the cosmic rays energy spectrum of individual components from 1014 eV to 1018 eV. The hybrid observation will be employed by LHAASO experiment, in which the lateral and longitudinal distributions of the extensive air shower can be observed simultaneously. Thus many kinds of parameters can be used for primary nuclei identification. In this paper, high purity cosmic ray simulation samples of light nuclei component are obtained through Multi-Variable Analysis. The apertures of 1/4 LHAASO array for pure proton and mixed proton and helium (H&He) samples are 900 m2Sr and 1800 m2Sr respectively. A prospect of proton and H&He spectra from 100 TeV to 4 PeV is discussed.
△ Less
Submitted 19 April, 2019;
originally announced April 2019.
-
High-efficiency terahertz spin-decoupled meta-coupler for spoof surface plasmon excitation and beam steering
Authors:
Li-Zheng Yin,
Tie-Jun Huang,
Feng-Yuan Han,
Jiang-Yu Liu,
Pu-Kun Liu
Abstract:
Spoof surface plasmon (SSP) meta-couplers that efficiently integrate other diversified functionalities into a single ultrathin device are highly desirable in the modern microwave and terahertz fields. However, the diversified functionalities, to the best of our knowledge, have not been applied to circular polarization meta-couplers because of the spin coupling between the orthogonal incident waves…
▽ More
Spoof surface plasmon (SSP) meta-couplers that efficiently integrate other diversified functionalities into a single ultrathin device are highly desirable in the modern microwave and terahertz fields. However, the diversified functionalities, to the best of our knowledge, have not been applied to circular polarization meta-couplers because of the spin coupling between the orthogonal incident waves. In this paper, we propose and numerically demonstrate a terahertz spin-decoupled bifunctional meta-coupler for SSP excitation and beam steering. The designed meta-coupler is composed of a coupling metasurface and a propagating metasurface. The former aims at realizing anomalous reflection or converting the incident waves into SSP under the illumination of the left or right circular polarization waves, respectively, and the latter are used to guide out the excited SSP. The respective converting efficiency can reach 82% and 70% at 0.3THz for the right and left circular polarization incident waves. Besides, by appropriately adjusting the reflection phase distribution, many other diversified functionalities can also be integrated into the meta-coupler. Our study may open up new routes for polarization-related SSP couplers, detectors, and other practical terahertz devices.
△ Less
Submitted 12 April, 2019;
originally announced April 2019.
-
A semi-implicit, energy- and charge-conserving particle-in-cell algorithm for the relativistic Vlasov-Maxwell equations
Authors:
Guangye Chen,
Luis Chacón,
Lin Yin,
Brian J. Albright,
David J. Stark,
Robert F. Bird
Abstract:
Conventional explicit electromagnetic particle-in-cell (PIC) algorithms do not conserve discrete energy exactly. Time-centered fully implicit PIC algorithms can conserve discrete energy exactly, but may introduce large dispersion errors in the light-wave modes. This can lead to intolerable simulation errors where accurate light propagation is needed (e.g. in laser-plasma interactions). In this stu…
▽ More
Conventional explicit electromagnetic particle-in-cell (PIC) algorithms do not conserve discrete energy exactly. Time-centered fully implicit PIC algorithms can conserve discrete energy exactly, but may introduce large dispersion errors in the light-wave modes. This can lead to intolerable simulation errors where accurate light propagation is needed (e.g. in laser-plasma interactions). In this study, we selectively combine the leap-frog and Crank-Nicolson methods to produce an exactly energy- and charge-conserving relativistic electromagnetic PIC algorithm. Specifically, we employ the leap-frog method for Maxwell's equations, and the Crank-Nicolson method for the particle equations. The semi-implicit algorithm admits exact global energy conservation, exact local charge conservation, and preserves the dispersion properties of the leap-frog method for the light wave. The algorithm employs a new particle pusher designed to maximize efficiency and minimize wall-clock-time impact vs. the explicit alternative. It has been implemented in a code named iVPIC, based on the Los Alamos National Laboratory VPIC code (\url{https://github.com/losalamos/vpic}). We present numerical results that demonstrate the properties of the scheme with sample test problems: relativistic two-stream instability, Weibel instability, and laser-plasma instabilities.
△ Less
Submitted 8 March, 2019; v1 submitted 28 February, 2019;
originally announced March 2019.
-
On Predictability of Time Series
Authors:
Paiheng Xu,
Likang Yin,
Zhongtao Yue,
Tao Zhou
Abstract:
The method to estimate the predictability of human mobility was proposed in [C. Song \emph{et al.}, Science {\bf 327}, 1018 (2010)], which is extensively followed in exploring the predictability of disparate time series. However, the ambiguous description in the original paper leads to some misunderstandings, including the inconsistent logarithm bases in the entropy estimator and the entropy-predi…
▽ More
The method to estimate the predictability of human mobility was proposed in [C. Song \emph{et al.}, Science {\bf 327}, 1018 (2010)], which is extensively followed in exploring the predictability of disparate time series. However, the ambiguous description in the original paper leads to some misunderstandings, including the inconsistent logarithm bases in the entropy estimator and the entropy-predictability-conversion equation, as well as the details in the calculation of the Lempel-Ziv estimator, which further results in remarkably overestimated predictability. This paper demonstrates the degree of overestimation by four different types of theoretically generated time series and an empirical data set, and shows the intrinsic deviation of the Lempel-Ziv estimator for highly random time series. This work provides a clear picture on this issue and thus helps researchers in correctly estimating the predictability of time series.
△ Less
Submitted 11 June, 2018;
originally announced June 2018.
-
Sidebands suppression of 852 nm Cesium Faraday anomalous dispersion optical filter by argon gas
Authors:
Junyu Xiong,
Longfei Yin,
Bin Luo,
Jingbiao Chen,
Hong Guo
Abstract:
In this work, sidebands suppression brought by buffer gas argon (Ar) in cesium Faraday anomalous dispersion optical filter (FADOF) at 852 nm is investigated. FADOF performances at different Ar pressures (0 torr, 1 torr, 5 torr and 10 torr) are compared, and a single-peak transmittance spectrum with peak transmittance up to 80% is achieved at the high Ar pressure. A detailed analysis shows that, th…
▽ More
In this work, sidebands suppression brought by buffer gas argon (Ar) in cesium Faraday anomalous dispersion optical filter (FADOF) at 852 nm is investigated. FADOF performances at different Ar pressures (0 torr, 1 torr, 5 torr and 10 torr) are compared, and a single-peak transmittance spectrum with peak transmittance up to 80% is achieved at the high Ar pressure. A detailed analysis shows that, this sidebands suppression comes from the depopulation enhancement by the buffer gas. This result can be generalized to other FADOFs with similar level structures such as the D2 lines of other alkali metal atoms.
△ Less
Submitted 22 November, 2017; v1 submitted 14 November, 2017;
originally announced November 2017.
-
Negative exponential behavior of image mutual information for pseudo-thermal light ghost imaging: Observation, modeling, and verification
Authors:
Junhui Li,
Bin Luo,
Dongyue Yang,
Longfie Yin,
Guohua Wu,
Hong Guo
Abstract:
When use the image mutual information to assess the quality of reconstructed image in pseudo-thermal light ghost imaging, a negative exponential behavior with respect to the measurement number is observed. Based on information theory and a few simple and verifiable assumptions, semi-quantitative model of image mutual information under varying measurement numbers is established. It is the Gaussian…
▽ More
When use the image mutual information to assess the quality of reconstructed image in pseudo-thermal light ghost imaging, a negative exponential behavior with respect to the measurement number is observed. Based on information theory and a few simple and verifiable assumptions, semi-quantitative model of image mutual information under varying measurement numbers is established. It is the Gaussian characteristics of the bucket detector output probability distribution that leads to this negative exponential behavior. Designed experiments verify the model.
△ Less
Submitted 26 March, 2017;
originally announced March 2017.
-
Binary sampling ghost imaging: add random noise to fight quantization caused image quality decline
Authors:
Junhui Li,
Dongyue Yang,
Bin Luo,
Guohua Wu,
Longfei Yin,
Hong Guo
Abstract:
When the sampling data of ghost imaging is recorded with less bits, i.e., experiencing quantization, decline of image quality is observed. The less bits used, the worse image one gets. Dithering, which adds suitable random noise to the raw data before quantization, is proved to be capable of compensating image quality decline effectively, even for the extreme binary sampling case. A brief explanat…
▽ More
When the sampling data of ghost imaging is recorded with less bits, i.e., experiencing quantization, decline of image quality is observed. The less bits used, the worse image one gets. Dithering, which adds suitable random noise to the raw data before quantization, is proved to be capable of compensating image quality decline effectively, even for the extreme binary sampling case. A brief explanation and parameter optimization of dithering are given.
△ Less
Submitted 28 February, 2017;
originally announced February 2017.
-
Source coding model for repeated snapshot imaging
Authors:
Junhui Li,
Bin Luo,
Dongyue Yang,
Guohua wu,
Longfei Yin,
Hong Guo
Abstract:
Imaging based on successive repeated snapshot measurement is modeled as a source coding process in information theory. The necessary number of measurement to maintain a certain level of error rate is depicted as the rate-distortion function of the source coding. Quantitative formula of the error rate versus measurement number relation is derived, based on the information capacity of imaging system…
▽ More
Imaging based on successive repeated snapshot measurement is modeled as a source coding process in information theory. The necessary number of measurement to maintain a certain level of error rate is depicted as the rate-distortion function of the source coding. Quantitative formula of the error rate versus measurement number relation is derived, based on the information capacity of imaging system. Second order fluctuation correlation imaging (SFCI) experiment with pseudo-thermal light verifies this formula, which paves the way for introducing information theory into the study of ghost imaging (GI), both conventional and computational.
△ Less
Submitted 8 April, 2016;
originally announced April 2016.
-
Modeling the behavior of signal-to-noise ratio for repeated snapshot imaging
Authors:
Junhui Li,
Bin Luo,
Dongyue Yang,
Guohua Wu,
Longfei Yin,
Hong Guo
Abstract:
For imaging of static object by the means of sequential repeated independent measurements, a theoretical modeling of the behavior of signal-to-noise ratio (SNR) with varying number of measurement is developed, based on the information capacity of optical imaging systems. Experimental veritification of imaging using pseudo-thermal light source is implemented, for both the direct average of multiple…
▽ More
For imaging of static object by the means of sequential repeated independent measurements, a theoretical modeling of the behavior of signal-to-noise ratio (SNR) with varying number of measurement is developed, based on the information capacity of optical imaging systems. Experimental veritification of imaging using pseudo-thermal light source is implemented, for both the direct average of multiple measurements, and the image reconstructed by second order fluctuation correlation (SFC) which is closely related to ghost imaging. Successful curve fitting of data measured under different conditions verifies the model.
△ Less
Submitted 1 March, 2016;
originally announced March 2016.
-
The role of narrowband filtering in improving signal-to-noise ratio of ghost imaging with thermal light background
Authors:
Dongyue Yang,
Junhui Li,
Guohua Wu,
Bin Luo,
Longfei Yin,
Hong Guo
Abstract:
In ghost imaging with narrow-band signal in thermal light background, signal arm filters bring higher value and upper limit of signal-to-noise ratio (SNR), and faster speed to reach that limit. The narrower bandwidth, the better.
In ghost imaging with narrow-band signal in thermal light background, signal arm filters bring higher value and upper limit of signal-to-noise ratio (SNR), and faster speed to reach that limit. The narrower bandwidth, the better.
△ Less
Submitted 20 February, 2016; v1 submitted 11 February, 2016;
originally announced February 2016.
-
Preprint Virtual Geographic Environment Based Coach Passenger Flow Forecasting
Authors:
Zhihan Lv,
Xiaoming Li,
Jinxing Hu,
Ling Yin,
Baoyun Zhang,
Shengzhong Feng
Abstract:
This is the preprint version of our paper on 2015 IEEE Computational Intelligence and Virtual Environments for Measurement Systems and Applications (CIVEMSA). There are lacks of integrated analysis and visual display of multiple real-time dynamic traffic information. This research proposed a deep research and application examples on this basis which is conducted in virtual geographic environment.…
▽ More
This is the preprint version of our paper on 2015 IEEE Computational Intelligence and Virtual Environments for Measurement Systems and Applications (CIVEMSA). There are lacks of integrated analysis and visual display of multiple real-time dynamic traffic information. This research proposed a deep research and application examples on this basis which is conducted in virtual geographic environment. Currently, there are many kinds of traffic passenger flow forecasting models, and the common models include regression forecasting model and time series prediction model. The coach passenger flow shows strong regularity and stability without longterm change trend, so this research adopts regression forecasting model to forecast the coach passenger flow
△ Less
Submitted 13 August, 2015; v1 submitted 4 April, 2015;
originally announced April 2015.
-
Scaling of laser-driven ion energies in the relativistic transparent regime
Authors:
D. Jung,
L. Yin,
B. J. Albright,
D. C. Gautier,
B. Dromey,
R. Shah,
S. Palaniyappan,
S. Letzring,
H. -C. Wu,
T. Shimada,
R. P. Johnson,
D. Habs,
M. Roth,
J. C. Fernandez,
B. M. Hegelich
Abstract:
Laser-driven ions have compelling properties and their potential use for medical applications has attracted a huge global interest. One of the major challenges of these applications is generating beams of the required energies. To date, there has been no systematic study of the effect of laser intensity on the generation of laser-driven ions from ultrathin foils during relativistic transparency. H…
▽ More
Laser-driven ions have compelling properties and their potential use for medical applications has attracted a huge global interest. One of the major challenges of these applications is generating beams of the required energies. To date, there has been no systematic study of the effect of laser intensity on the generation of laser-driven ions from ultrathin foils during relativistic transparency. Here we present a scaling for ion energies with respect to the on-target laser intensity and in considering target thickness we find an optimum thickness closely related to the experimentally observed relativistic transparency. A steep linear scaling with the normalized laser amplitude a0 has been measured and verified with PIC simulations. In contrast to TNSA, this scaling is much steeper and has been measured for ions with Z > 1. Following our results, ion energies exceeding 100MeV/amu are already accessible with currently available laser systems enabling realization of numerous advanced applications
△ Less
Submitted 3 June, 2014;
originally announced June 2014.
-
The Tip-Induced Twisted Bilayer Graphene Superlattice on HOPG: Capillary Attraction Effect
Authors:
Long Jing Yin,
Wen Xiao Wang,
Ke Ke Feng,
Rui-Fen Dou,
Jia-Cai Nie
Abstract:
We use the tip of the scanning tunneling microscope (STM) to manipulate single weakly bound nanometer-sized sheets on the the highly oriented pyrolytic graphite (HOPG) surface through artifically increasing the tip and sample interaction in humid environment. By this means it is possible to tear apart a graphite sheet againt a step and fold this part onto the HOPG surface and thus generate the gap…
▽ More
We use the tip of the scanning tunneling microscope (STM) to manipulate single weakly bound nanometer-sized sheets on the the highly oriented pyrolytic graphite (HOPG) surface through artifically increasing the tip and sample interaction in humid environment. By this means it is possible to tear apart a graphite sheet againt a step and fold this part onto the HOPG surface and thus generate the gaphene superlattices with hexagonal symmetry. The tip and sample surface interactions, including the van der Waals force, eletrostatic force and capillary attraction force originating from the Laplace pressure due to the formation of a highly curved fluid meniscus connecting the tip and sample, are discussed in details to understand the fromation mechnism of graphen superlattice induced by the STM tip. Especially, the capillary force is the key role in manipulating the graphite surface sheet in the hunmidity condition. Our approach may provides a simple and feasible route to prepare the controllable superlattices and graphene nanoribbons but also replenish and find down the theory of generation of graphene superlattice on HOPG surface by the tip.
△ Less
Submitted 5 May, 2014;
originally announced May 2014.
-
Broadband omnidirectional invisibility for sound in three dimensions
Authors:
Weiwei Kan,
Bin Liang,
Ruiqi Li,
Xue Jiang,
Xin-ye Zou,
Lei-lei Yin,
Jianchun Cheng
Abstract:
Acoustic cloaks that make object undetectable to sound waves have potential applications in a variety of scenarios and have received increasing interests recently. However, the experimental realization of a three-dimensional (3D) acoustic cloak that works within broad ranges of operating frequency and incident angle still remains a challenge despite the paramount importance for the practical appli…
▽ More
Acoustic cloaks that make object undetectable to sound waves have potential applications in a variety of scenarios and have received increasing interests recently. However, the experimental realization of a three-dimensional (3D) acoustic cloak that works within broad ranges of operating frequency and incident angle still remains a challenge despite the paramount importance for the practical application of cloaking devices. Here we report the design and experimental demonstration of the first 3D broadband cloak capable of cancelling the scattering field near curved surfaces. Unlike the ground cloaks that only work in the presence of a flat boundary, the proposed scheme can render the invisibility effect for an arbitrarily curved boundary. The designed cloak simply comprises homogeneous positive-index anisotropic materials, with parameters completely independent of either the cloaked object or the boundary. With the flexibility of applying to arbitrary boundaries and the potential of being extended to yield 3D acoustic illusion effects, our method may take major a step toward the application of acoustic cloaks in reality and open the avenue to build other acoustic devices with versatile functionalities.
△ Less
Submitted 12 March, 2014;
originally announced March 2014.
-
160 MeV laser-accelerated protons from CH2 nano-targets for proton cancer therapy
Authors:
B. M. Hegelich,
D. Jung,
B. J. Albright,
M. Cheung,
B. Dromey,
D. C. Gautier,
C. Hamilton,
S. Letzring,
R. Munchhausen,
S. Palaniyappan,
R. Shah,
H. -C. Wu,
L. Yin,
J. C. Fernández
Abstract:
Proton (and ion) cancer therapy has proven to be an extremely effective even supe-rior method of treatment for some tumors 1-4. A major problem, however, lies in the cost of the particle accelerator facilities; high procurement costs severely limit the availability of ion radiation therapy, with only ~26 centers worldwide. Moreover, high operating costs often prevent economic operation without sta…
▽ More
Proton (and ion) cancer therapy has proven to be an extremely effective even supe-rior method of treatment for some tumors 1-4. A major problem, however, lies in the cost of the particle accelerator facilities; high procurement costs severely limit the availability of ion radiation therapy, with only ~26 centers worldwide. Moreover, high operating costs often prevent economic operation without state subsidies and have led to a shutdown of existing facilities 5,6. Laser-accelerated proton and ion beams have long been thought of as a way out of this dilemma, with the potential to provide the required ion beams at lower cost and smaller facility footprint 7-14. The biggest challenge has been the achievement of sufficient particle energy for therapy, in the 150-250 MeV range for protons 15,16. For the last decade, the maximum exper-imentally observed energy of laser-accelerated protons has remained at ~60 MeV 17. Here we the experimental demonstration of laser-accelerated protons to energies exceeding 150 MeV, reaching the therapy window. This was achieved through a dif-ferent acceleration regime rather than a larger laser, specifically a 150 TW laser with CH2 nano-targets in the relativistically transparent regime 18,19. We also demonstrate a clear scaling law with laser intensity based on analytical theory, computer simulations and experimental validation that will enable design of a pro-totype system spanning the full range of therapeutically desirable energies.
△ Less
Submitted 31 October, 2013;
originally announced October 2013.
-
Control of Stimulated Raman Scattering in the Strongly Nonlinear and Kinetic Regime Using Spike Trains of Uneven Duration and Delay: STUD Pulses
Authors:
B. J. Albright,
L. Yin,
B. Afeyan
Abstract:
Stimulated Raman scattering (SRS) in its strongly nonlinear, kinetic regime is controlled by a technique of deterministic, strong temporal modulation and spatial scrambling of laser speckle patterns, called Spike Trains of Uneven Duration and Delay (STUD pulses) [B. Afeyan and S. Hüller, Phys. Rev. Lett. (submitted)]. Kinetic simulations show that use of STUD pulses may decrease SRS reflectivity b…
▽ More
Stimulated Raman scattering (SRS) in its strongly nonlinear, kinetic regime is controlled by a technique of deterministic, strong temporal modulation and spatial scrambling of laser speckle patterns, called Spike Trains of Uneven Duration and Delay (STUD pulses) [B. Afeyan and S. Hüller, Phys. Rev. Lett. (submitted)]. Kinetic simulations show that use of STUD pulses may decrease SRS reflectivity by more than an order of magnitude over random-phase-plate (RPP) or induced-spatial-incoherence (ISI) beams of the same average intensity and comparable bandwidth.
△ Less
Submitted 17 April, 2013;
originally announced April 2013.
-
Record Performance of Electrical Injection Sub-wavelength Metallic-Cavity Semiconductor Lasers at Room Temperature
Authors:
K. Ding,
M. T. Hill,
Z. C. Liu,
L. J. Yin,
P. J. van Veldhoven,
C. Z. Ning
Abstract:
Metallic-Cavity lasers or plasmonic nanolasers of sub-wavelength sizes have attracted great attentions in recent years, with the ultimate goal of achieving continuous wave (CW), room temperature (RT) operation under electrical injection. Despite great efforts, a conclusive and convincing demonstration of this goal has proven challenging. By overcoming several fabrication challenges imposed by the…
▽ More
Metallic-Cavity lasers or plasmonic nanolasers of sub-wavelength sizes have attracted great attentions in recent years, with the ultimate goal of achieving continuous wave (CW), room temperature (RT) operation under electrical injection. Despite great efforts, a conclusive and convincing demonstration of this goal has proven challenging. By overcoming several fabrication challenges imposed by the stringent requirement of such small scale devices, we were finally able to achieve this ultimate goal. Our metallic nanolaser with a cavity volume of 0.67λ3 (λ=1591 nm) shows a linewidth of 0.5 nm at RT, which corresponds to a Q-value of 3182 compared to 235 of the cavity Q, the highest Q under lasing condition for RT CW operation of any sub-wavelength laser. Such record performance provides convincing evidences of the feasibility of RT CW metallic nanolasers, thus opening a wide range of practical possibilities of novel nanophotonic devices based on metal-semiconductor structures.
△ Less
Submitted 28 May, 2013; v1 submitted 14 September, 2012;
originally announced September 2012.
-
Particle Energization in 3D Magnetic Reconnection of Relativistic Pair Plasmas
Authors:
Wei Liu,
Hui Li,
Lin Yin,
B. J. Albright,
K. J. Bowers,
E. P. Liang
Abstract:
We present large scale 3D particle-in-cell (PIC) simulations to examine particle energization in magnetic reconnection of relativistic electron-positron (pair) plasmas. The initial configuration is set up as a relativistic Harris equilibrium without a guide field. These simulations are large enough to accommodate a sufficient number of tearing and kink modes. Contrary to the non-relativistic limit…
▽ More
We present large scale 3D particle-in-cell (PIC) simulations to examine particle energization in magnetic reconnection of relativistic electron-positron (pair) plasmas. The initial configuration is set up as a relativistic Harris equilibrium without a guide field. These simulations are large enough to accommodate a sufficient number of tearing and kink modes. Contrary to the non-relativistic limit, the linear tearing instability is faster than the linear kink instability, at least in our specific parameters. We find that the magnetic energy dissipation is first facilitated by the tearing instability and followed by the secondary kink instability. Particles are mostly energized inside the magnetic islands during the tearing stage due to the spatially varying electric fields produced by the outflows from reconnection. Secondary kink instability leads to additional particle acceleration. Accelerated particles are, however, observed to be thermalized quickly. The large amplitude of the vertical magnetic field resulting from the tearing modes by the secondary kink modes further help thermalizing the non-thermal particles generated from the secondary kink instability. Implications of these results for astrophysics are briefly discussed.
△ Less
Submitted 19 April, 2011; v1 submitted 13 May, 2010;
originally announced May 2010.