Showing 1–50 of 56 results for author: Xie, S

Demonstration of Si-doped Al-rich thin regrown Al(Ga)N films on AlN on sapphire templates with $\gt10^{15}/cm^3$ free carrier concentration using close-coupled showerhead MOCVD reactor

Authors: Swarnav Mukhopadhyay, Parthasarathy Seshadri, Mobinul Haque, Shuwen Xie, Ruixin Bai, Surjava Sanyal, Guangying Wang, Chirag Gupta, Shubhra S. Pasayat

Abstract: Thin Si-doped Al-rich (Al>0.85) regrown Al(Ga)N layers were deposited on AlN on Sapphire template using metal-organic chemical vapor deposition (MOCVD) techniques. The optimization of the deposition conditions such as temperature, V/III ratio, deposition rate, and Si concentration resulted in a high charge carrier concentration (>$10^{15}/cm^{3}$) in the Si-doped Al-rich Al(Ga)N films. A pulsed de… ▽ More Thin Si-doped Al-rich (Al>0.85) regrown Al(Ga)N layers were deposited on AlN on Sapphire template using metal-organic chemical vapor deposition (MOCVD) techniques. The optimization of the deposition conditions such as temperature, V/III ratio, deposition rate, and Si concentration resulted in a high charge carrier concentration (>$10^{15}/cm^{3}$) in the Si-doped Al-rich Al(Ga)N films. A pulsed deposition condition was employed to achieve a controllable Al composition greater than 95% and to prevent unintended Ga incorporation in the AlGaN material deposited using the close-coupled showerhead reactor. Also, the effect of unintentional Si incorporation on free charge carrier concentration at the regrowth interface was observed by varying the thickness of the regrown Al(Ga)N layer. A maximum charge carrier concentration of $4.8\times 10^{16}/cm^3$ and $7.5\times 10^{15}/cm^3$ were achieved for Al0.97Ga0.03N and AlN films with thickness <300 nm compared to previously reported n-Al(Ga)N films with thickness $\ge$400 nm deposited using MOCVD technique. △ Less

Submitted 14 July, 2024; originally announced July 2024.

Comments: 13 pages, 5 figures

Results for pixel and strip centimeter-scale AC-LGAD sensors with a 120 GeV proton beam

Authors: Irene Dutta, Christopher Madrid, Ryan Heller, Shirsendu Nanda, Danush Shekar, Claudio San Martín, Matías Barría, Artur Apresyan, Zhenyu Ye, William K. Brooks, Wei Chen, Gabriele D'Amen, Gabriele Giacomini, Alessandro Tricoli, Aram Hayrapetyan, Hakseong Lee, Ohannes Kamer Köseyan, Sergey Los, Koji Nakamura, Sayuka Kita, Tomoka Imamura, Cristían Peña, Si Xie

Abstract: We present the results of an extensive evaluation of strip and pixel AC-LGAD sensors tested with a 120 GeV proton beam, focusing on the influence of design parameters on the sensor temporal and spatial resolutions. Results show that reducing the thickness of pixel sensors significantly enhances their time resolution, with 20 $μ$m-thick sensors achieving around 20 ps. Uniform performance is attaina… ▽ More We present the results of an extensive evaluation of strip and pixel AC-LGAD sensors tested with a 120 GeV proton beam, focusing on the influence of design parameters on the sensor temporal and spatial resolutions. Results show that reducing the thickness of pixel sensors significantly enhances their time resolution, with 20 $μ$m-thick sensors achieving around 20 ps. Uniform performance is attainable with optimized sheet resistance, making these sensors ideal for future timing detectors. Conversely, 20 $μ$m-thick strip sensors exhibit higher jitter than similar pixel sensors, negatively impacting time resolution, despite reduced Landau fluctuations with respect to the 50 $μ$m-thick versions. Additionally, it is observed that a low resistivity in strip sensors limits signal size and time resolution, whereas higher resistivity improves performance. This study highlights the importance of tuning the n$^{+}$ sheet resistance and suggests that further improvements should target specific applications like the Electron-Ion Collider or other future collider experiments. In addition, the detailed performance of four AC-LGADs sensor designs is reported as examples of possible candidates for specific detector applications. These advancements position AC-LGADs as promising candidates for future 4D tracking systems, pending the development of specialized readout electronics. △ Less

Submitted 13 July, 2024; originally announced July 2024.

Enhancing Low-Energy Neutron and Gamma Ray Detection Using Convolutional Neural Networks with EJ-276 Scintillators

Authors: Fengzhao Shen, Tao Li, Jingkui He, Shenghui Xie, Yuehuan Wei, Tuchen Huang, Wei Wang

Abstract: Organic scintillators, such as plastic scintillators, are widely used to detect fast neutrons and gamma rays. The EJ-276 scintillator offers a versatile solution for detecting fast neutrons and gamma rays simultaneously, making it ideal for mixed neutron-gamma field detection applications. This study evaluates the Pulse Shape Discrimination (PSD) capabilities of the EJ-276 scintillator paired with… ▽ More Organic scintillators, such as plastic scintillators, are widely used to detect fast neutrons and gamma rays. The EJ-276 scintillator offers a versatile solution for detecting fast neutrons and gamma rays simultaneously, making it ideal for mixed neutron-gamma field detection applications. This study evaluates the Pulse Shape Discrimination (PSD) capabilities of the EJ-276 scintillator paired with silicon photomultiplier (SiPM) array readouts. Integrating the 1-inch EJ-276 scintillator with SiPM arrays achieved a Figure of Merit (FOM) of 1.13 at an energy threshold of 200 keVee (electron equivalent). However, using the Charge Comparison Method (CCM) to distinguish between neutrons and gamma rays was challenging, especially at energies below 200 keVee. To improve low-energy resolution, the Convolutional Neural Network (CNN) approach was adopted. The InceptionTime and EfficientNetV2 models were developed, using one-dimensional time series and two-dimensional matrix image inputs, respectively. The transformation from one-dimensional arrays to two-dimensional images was achieved using three techniques: Gramian Angular Summation Field(GASF), Recurrence Plot(RP), and Relative Position Matrix(RPM). These methods demonstrated high accuracy at energy levels above 200 keVee. At lower energy regions, CNN methods, particularly the InceptionTime model, outperformed CCM methods. Notably, CNN methods reached accuracies of 96.79% and 98.33% in the 0-100 keVee and 100-200 keVee ranges, respectively, significantly higher than the 85.49% and 94.56% achieved by CCM, representing improvements of 13.22% and 3.99%. These results highlight the superior performance of CNN methods in differentiating between neutrons and gamma rays, especially in low-energy regions. △ Less

Submitted 10 May, 2024; originally announced May 2024.

Nonreciprocal interactions in crowd dynamics: investigating the impact of moving threats on pedestrian speed preferences

Authors: Shaocong Xie, Rui Ye, Xiaolian Li, Zhongyi Huang, Shuchao Cao, Wei Lv, Hong He, Ping Zhang, Zhiming Fang, Jun Zhang, Weiguo Song

Abstract: Nonreciprocal interaction crowd systems, such as human-human, human-vehicle, and human-robot systems, often have serious impacts on pedestrian safety and social order. A more comprehensive understanding of these systems is needed to optimize system stability and efficiency. Despite the importance of these interactions, empirical research in this area remains limited. Thus, in our study we explore… ▽ More Nonreciprocal interaction crowd systems, such as human-human, human-vehicle, and human-robot systems, often have serious impacts on pedestrian safety and social order. A more comprehensive understanding of these systems is needed to optimize system stability and efficiency. Despite the importance of these interactions, empirical research in this area remains limited. Thus, in our study we explore this underresearched area, focusing on scenarios where nonreciprocity plays a critical role, such as mass stabbings, which pose a substantial risk to public safety. We conducted the first experiments on this system and analysed high-accuracy data obtained from these experiments. The extent of the direct threat zone is determined by the speed of the moving threat and the radius of danger occurrence. We further categorize potential threats into direct, adjacent, and rear-view zones, quantifying the level of threat for pedestrians. Our study revealed that a pedestrian's desired velocity correlated positively with potential threat intensity, increasing until near the direct threat zone. An emerging steady state is observed when escape routes are blocked by moving threats. This deviation affects the density-velocity relationship, making it distinct from the general relationship. This deviation signifies unique pedestrian behaviour in the presence of moving threats. Additionally, the rate of change in the angle for pedestrian motion in various desired directions is synchronized. This indicates the emergence of collective intelligence in nonreciprocal interaction crowd systems. As a result, our study may constitute a pioneering step towards understanding nonreciprocal interactions in crowd systems through laboratory experiments. These findings may enhance pedestrian safety and inform not only government crowd management strategies but also individual self-protection measures. △ Less

Submitted 2 April, 2024; originally announced April 2024.

Quantum entanglement during single-cycle nonsequential ionization

Authors: Daniel Younis, Songbo Xie, Joseph H. Eberly

Abstract: In order to elucidate the correlated motion of atomic electrons, we investigate the attosecond-scale dynamics of their entanglement arising due to nonsequential ionization driven by a strong, linearly-polarized laser field. The calculation is based on numerical integration of the time-dependent Schrödinger equation for helium irradiated by a one-cycle, near-infrared field whose intensity is in the… ▽ More In order to elucidate the correlated motion of atomic electrons, we investigate the attosecond-scale dynamics of their entanglement arising due to nonsequential ionization driven by a strong, linearly-polarized laser field. The calculation is based on numerical integration of the time-dependent Schrödinger equation for helium irradiated by a one-cycle, near-infrared field whose intensity is in the neighborhood of $1\textrm{ PW/cm}^2$. The entanglement measure (Schmidt weight) is resolved on a sub-cycle timescale, and its key dependency on the field profile is exposed for the first time by tuning the carrier-envelope phase (CEP) to control the ionization-recollision timing. We find that between CEP cases, this can result in a $20\%$ enhancement in the peak entanglement. A connection is made between the entanglement, the probability current, and the correlation coefficient for the two electron momenta, providing new insights into the nonsequential ionization mechanism. △ Less

Submitted 14 March, 2024; originally announced March 2024.

Comments: 8 pages, 8 figures

FuXi-S2S: A machine learning model that outperforms conventional global subseasonal forecast models

Authors: Lei Chen, Xiaohui Zhong, Hao Li, Jie Wu, Bo Lu, Deliang Chen, Shangping Xie, Qingchen Chao, Chensen Lin, Zixin Hu, Yuan Qi

Abstract: Skillful subseasonal forecasts are crucial for various sectors of society but pose a grand scientific challenge. Recently, machine learning based weather forecasting models outperform the most successful numerical weather predictions generated by the European Centre for Medium-Range Weather Forecasts (ECMWF), but have not yet surpassed conventional models at subseasonal timescales. This paper intr… ▽ More Skillful subseasonal forecasts are crucial for various sectors of society but pose a grand scientific challenge. Recently, machine learning based weather forecasting models outperform the most successful numerical weather predictions generated by the European Centre for Medium-Range Weather Forecasts (ECMWF), but have not yet surpassed conventional models at subseasonal timescales. This paper introduces FuXi Subseasonal-to-Seasonal (FuXi-S2S), a machine learning model that provides global daily mean forecasts up to 42 days, encompassing five upper-air atmospheric variables at 13 pressure levels and 11 surface variables. FuXi-S2S, trained on 72 years of daily statistics from ECMWF ERA5 reanalysis data, outperforms the ECMWF's state-of-the-art Subseasonal-to-Seasonal model in ensemble mean and ensemble forecasts for total precipitation and outgoing longwave radiation, notably enhancing global precipitation forecast. The improved performance of FuXi-S2S can be primarily attributed to its superior capability to capture forecast uncertainty and accurately predict the Madden-Julian Oscillation (MJO), extending the skillful MJO prediction from 30 days to 36 days. Moreover, FuXi-S2S not only captures realistic teleconnections associated with the MJO, but also emerges as a valuable tool for discovering precursor signals, offering researchers insights and potentially establishing a new paradigm in Earth system science research. △ Less

Submitted 5 July, 2024; v1 submitted 15 December, 2023; originally announced December 2023.

Acoustic Vortex in Waveguide with Chiral Gradient Sawtooth Metasurface

Authors: Zeliang Song, Shuhuan Xie, Yong Li, Hua Ding, Feiyan Cai, Yugui Peng, Xuefeng Zhu, Degang Zhao

Abstract: The acoustic vortex states with spiral phase dislocation that can carry orbital angular moment (OAM) have aroused many research interests in recent years. The mainstream methods of generating acoustic vortex are based on Huygens-Fresnel principle to modulate the wavefront to create spatial spiral phase dislocation. In this work, we propose an entirely new scenario to generate acoustic vortex in a… ▽ More The acoustic vortex states with spiral phase dislocation that can carry orbital angular moment (OAM) have aroused many research interests in recent years. The mainstream methods of generating acoustic vortex are based on Huygens-Fresnel principle to modulate the wavefront to create spatial spiral phase dislocation. In this work, we propose an entirely new scenario to generate acoustic vortex in a waveguide with chiral gradient sawtooth metasurface. The physical mechanism of our method is to lift the degenerate dipole eigenmodes through the scattering effect of the chiral surface structure, and then the superposition of them will generate both and order vortices in place. Compared to the existing methods of acoustic vortex production, our design has many merits, such as easy to manufacture and control, the working frequency is broadband, sign of vortex order can be readily flipped. Both the full-wave simulations and experimental measurements validate the existence of the acoustic vortices. The torque effect of the acoustic vortices is also successfully performed by rotating a foam disk as a practical application. Our work opens up a new route for generating acoustic vortex and could have potential significances in microfluidics, acoustic tweezers and ultrasonic communication, etc. △ Less

Submitted 14 January, 2024; v1 submitted 21 November, 2023; originally announced November 2023.

Detector R&D needs for the next generation $e^+e^-$ collider

Authors: A. Apresyan, M. Artuso, J. Brau, H. Chen, M. Demarteau, Z. Demiragli, S. Eno, J. Gonski, P. Grannis, H. Gray, O. Gutsche, C. Haber, M. Hohlmann, J. Hirschauer, G. Iakovidis, K. Jakobs, A. J. Lankford, C. Pena, S. Rajagopalan, J. Strube, C. Tully, C. Vernieri, A. White, G. W. Wilson, S. Xie , et al. (3 additional authors not shown)

Abstract: The 2021 Snowmass Energy Frontier panel wrote in its final report "The realization of a Higgs factory will require an immediate, vigorous and targeted detector R&D program". Both linear and circular $e^+e^-$ collider efforts have developed a conceptual design for their detectors and are aggressively pursuing a path to formalize these detector concepts. The U.S. has world-class expertise in particl… ▽ More The 2021 Snowmass Energy Frontier panel wrote in its final report "The realization of a Higgs factory will require an immediate, vigorous and targeted detector R&D program". Both linear and circular $e^+e^-$ collider efforts have developed a conceptual design for their detectors and are aggressively pursuing a path to formalize these detector concepts. The U.S. has world-class expertise in particle detectors, and is eager to play a leading role in the next generation $e^+e^-$ collider, currently slated to become operational in the 2040s. It is urgent that the U.S. organize its efforts to provide leadership and make significant contributions in detector R&D. These investments are necessary to build and retain the U.S. expertise in detector R&D and future projects, enable significant contributions during the construction phase and maintain its leadership in the Energy Frontier regardless of the choice of the collider project. In this document, we discuss areas where the U.S. can and must play a leading role in the conceptual design and R&D for detectors for $e^+e^-$ colliders. △ Less

Submitted 26 June, 2023; v1 submitted 23 June, 2023; originally announced June 2023.

Comments: 63 pages, 6 figures, submitted to P5

Design and performance of the Fermilab Constant Fraction Discriminator ASIC

Authors: Si Xie, Artur Apresyan, Ryan Heller, Christopher Madrid, Irene Dutta, Aram Hayrapetyan, Sergey Los, Cristian Pena, Tom Zimmerman

Abstract: We present the design and performance characterization results of the novel Fermilab Constant Fraction Discriminator ASIC (FCFD) developed to readout low gain avalanche detector (LGAD) signals by directly using a constant fraction discriminator (CFD) to measure signal arrival time. Silicon detectors with time resolutions less than 30 ps will play a critical role in future collider experiments, and… ▽ More We present the design and performance characterization results of the novel Fermilab Constant Fraction Discriminator ASIC (FCFD) developed to readout low gain avalanche detector (LGAD) signals by directly using a constant fraction discriminator (CFD) to measure signal arrival time. Silicon detectors with time resolutions less than 30 ps will play a critical role in future collider experiments, and LGADs have been demonstrated to provide the required time resolution and radiation tolerance for many such applications. The FCFD has a specially designed discriminator that is robust against amplitude variations of the signal from the LGAD that normally requires an additional correction step when using a traditional leading edge discriminator based measurement. The application of the CFD directly in the ASIC promises to be more reliable and reduces the complication of timing detectors during their operation. We will present a summary of the measured performance of the FCFD for input signals generated by internal charge injection, LGAD signals from an infrared laser, and LGAD signals from minimum-ionizing particles. The mean time response for a wide range of LGAD signal amplitudes has been measured to vary no more than 15 ps, orders of magnitude more stable than an uncorrected leading edge discriminator based measurement, and effectively removes the need for any additional time-walk correction. The measured contribution to the time resolution from the FCFD ASIC is also found to be 10 ps for signals with charge above 20 fC. △ Less

Submitted 12 June, 2023; originally announced June 2023.

Report number: FERMILAB-PUB-23-248-PPD

Inverse design of artificial skins

Authors: Zhiguang Liu, Minkun Cai, Shenda Hong, Junli Shi, Sai Xie, Chang Liu, Huifeng Du, James D. Morin, Gang Li, Wang Liu, Hong Wang, Ke Tang, Nicholas X. Fang, Chuan Fei Guo

Abstract: Mimicking the perceptual functions of human cutaneous mechanoreceptors, artificial skins or flexible pressure sensors can transduce tactile stimuli to quantitative electrical signals. Conventional methods to design such devices follow a forward structure-to-property routine based on trial-and-error experiments/simulations, which take months or longer to determine one solution valid for one specifi… ▽ More Mimicking the perceptual functions of human cutaneous mechanoreceptors, artificial skins or flexible pressure sensors can transduce tactile stimuli to quantitative electrical signals. Conventional methods to design such devices follow a forward structure-to-property routine based on trial-and-error experiments/simulations, which take months or longer to determine one solution valid for one specific material. Target-oriented inverse design that shows far higher output efficiency has proven effective in other fields, but is still absent for artificial skins because of the difficulties in acquiring big data. Here, we report a property-to-structure inverse design of artificial skins based on small dataset machine learning, exhibiting a comprehensive efficiency at least four orders of magnitude higher than the conventional routine. The inverse routine can predict hundreds of solutions that overcome the intrinsic signal saturation problem for linear response in hours, and the solutions are valid to a variety of materials. Our results demonstrate that the inverse design allowed by small dataset is an efficient and powerful tool to target multifarious applications of artificial skins, which can potentially advance the fields of intelligent robots, advanced healthcare, and human-machine interfaces. △ Less

Submitted 10 April, 2023; originally announced April 2023.

Entangled Photon Pair Source Demonstrator using the Quantum Instrumentation Control Kit System

Authors: Si Xie, Leandro Stefanazzi, Christina Wang, Cristian Pena, Raju Valivarthi, Lautaro Narvaez, Gustavo Cancelo, Keshav Kapoor, Boris Korzh, Matthew Shaw, Panagiotis Spentzouris, Maria Spiropulu

Abstract: We report the first demonstration of using the Quantum Instrumentation and Control Kit (QICK) system on RFSoCFPGA technology to drive an entangled photon pair source and to detect the photon signals. With the QICK system, we achieve high levels of performance metrics including coincidence-to-accidental ratio exceeding 150, and entanglement visibility exceeding 95%, consistent with performance metr… ▽ More We report the first demonstration of using the Quantum Instrumentation and Control Kit (QICK) system on RFSoCFPGA technology to drive an entangled photon pair source and to detect the photon signals. With the QICK system, we achieve high levels of performance metrics including coincidence-to-accidental ratio exceeding 150, and entanglement visibility exceeding 95%, consistent with performance metrics achieved using conventional waveform generators. We also demonstrate simultaneous detector readout using the digitization functional of QICK, achieving internal system synchronization time resolution of 3.2 ps. The work reported in this paper represents an explicit demonstration of the feasibility for replacing commercial waveform generators and time taggers with RFSoC-FPGA technology in the operation of a quantum network, representing a cost reduction of more than an order of magnitude. △ Less

Submitted 3 April, 2023; originally announced April 2023.

Report number: FERMILAB-PUB-23-118-LDRD-QIS

First survey of centimeter-scale AC-LGAD strip sensors with a 120 GeV proton beam

Authors: Christopher Madrid, Ryan Heller, Claudio San Martín, Shirsendu Nanda, Artur Apresyan, William K. Brooks, Wei Chen, Gabriele Giacomini, Ohannes Kamer Köseyan, Sergey Los, Cristián Peña, René Rios, Alessandro Tricoli, Si Xie, Zhenyu Ye

Abstract: We present the first beam test results with centimeter-scale AC-LGAD strip sensors, using the Fermilab Test Beam Facility and sensors manufactured by the Brookhaven National Laboratory. Sensors of this type are envisioned for applications that require large-area precision 4D tracking coverage with economical channel counts, including timing layers for the Electron Ion Collider (EIC), and space-bas… ▽ More We present the first beam test results with centimeter-scale AC-LGAD strip sensors, using the Fermilab Test Beam Facility and sensors manufactured by the Brookhaven National Laboratory. Sensors of this type are envisioned for applications that require large-area precision 4D tracking coverage with economical channel counts, including timing layers for the Electron Ion Collider (EIC), and space-based particle experiments. A survey of sensor designs is presented, with the aim of optimizing the electrode geometry for spatial resolution and timing performance. Several design considerations are discussed towards maintaining desirable signal characteristics with increasingly larger electrodes. The resolutions obtained with several prototypes are presented, reaching simultaneous 18 micron and 32 ps resolutions from strips of 1 cm length and 500 micron pitch. With only slight modifications, these sensors would be ideal candidates for a 4D timing layer at the EIC. △ Less

Submitted 20 April, 2023; v1 submitted 17 November, 2022; originally announced November 2022.

Solid State Detectors and Tracking for Snowmass

Authors: A. Affolder, A. Apresyan, S. Worm, M. Albrow, D. Ally, D. Ambrose, E. Anderssen, N. Apadula, P. Asenov, W. Armstrong, M. Artuso, A. Barbier, P. Barletta, L. Bauerdick, D. Berry, M. Bomben, M. Boscardin, J. Brau, W. Brooks, M. Breidenbach, J. Buckley, V. Cairo, R. Caputo, L. Carpenter, M. Centis-Vignali , et al. (110 additional authors not shown)

Abstract: Tracking detectors are of vital importance for collider-based high energy physics (HEP) experiments. The primary purpose of tracking detectors is the precise reconstruction of charged particle trajectories and the reconstruction of secondary vertices. The performance requirements from the community posed by the future collider experiments require an evolution of tracking systems, necessitating the… ▽ More Tracking detectors are of vital importance for collider-based high energy physics (HEP) experiments. The primary purpose of tracking detectors is the precise reconstruction of charged particle trajectories and the reconstruction of secondary vertices. The performance requirements from the community posed by the future collider experiments require an evolution of tracking systems, necessitating the development of new techniques, materials and technologies in order to fully exploit their physics potential. In this article we summarize the discussions and conclusions of the 2022 Snowmass Instrumentation Frontier subgroup on Solid State and Tracking Detectors (Snowmass IF03). △ Less

Submitted 19 October, 2022; v1 submitted 8 September, 2022; originally announced September 2022.

Comments: for the Snowmass Instrumentation Frontier Solid State Detector and Tracking community

Fano Interference in a Single-Molecule Junction

Authors: Yiping Ouyang, Rui Wang, Deping Guo, Yang-Yang Ju, Danfeng Pan, Xuecou Tu, Lin Kang, Jian Chen, Peiheng Wu, Xuefeng Wang, Jianguo Wan, Minhao Zhang, Wei Ji, Yuan-Zhi Tan, Su-Yuan Xie, Fengqi Song

Abstract: Trends of miniaturized devices and quantum interference electronics lead to the long desire of Fano interference in single-molecule junctions, here, which is successfully demonstrated using the 2,7-di(4-pyridyl)-9,9'-spirobifluorene molecule with a long backbone group and a short side group. Experimentally, the two electrically coupled groups are found to contribute to two blurred degenerate point… ▽ More Trends of miniaturized devices and quantum interference electronics lead to the long desire of Fano interference in single-molecule junctions, here, which is successfully demonstrated using the 2,7-di(4-pyridyl)-9,9'-spirobifluorene molecule with a long backbone group and a short side group. Experimentally, the two electrically coupled groups are found to contribute to two blurred degenerate points in the differential conductance mapping. This forms a characteristic non-centrosymmetric double-crossing feature, with distinct temperature response for each crossing. Theoretically, we describe the practical in-junction electron transmission using a new two-tunnelling-channel coupling model and obtain a working formula with a Fano term and a Breit-Wigner term. The formula is shown to provide a good fit for all the mapping data and their temperature dependence in three dimensions, identifying the Fano component. Our work thus forms a complete set of evidence of the Fano interference in a single-molecule junction induced by two-tunnelling-channel coupling transport. Density functional theory calculations are used to corroborate this new physics. △ Less

Submitted 18 August, 2022; originally announced August 2022.

Comments: 13 pages (main text), 4000 Words (main text), 5 figures

A Data Driven Method for Multi-step Prediction of Ship Roll Motion in High Sea States

Authors: Dan Zhang, Xi Zhou, Zi-Hao Wang, Yan Peng, Shao-Rong Xie

Abstract: Ship roll motion in high sea states has large amplitudes and nonlinear dynamics, and its prediction is significant for operability, safety, and survivability. This paper presents a novel data-driven methodology to provide a multi-step prediction of ship roll motions in high sea states. A hybrid neural network is proposed that combines long short-term memory (LSTM) and convolutional neural network… ▽ More Ship roll motion in high sea states has large amplitudes and nonlinear dynamics, and its prediction is significant for operability, safety, and survivability. This paper presents a novel data-driven methodology to provide a multi-step prediction of ship roll motions in high sea states. A hybrid neural network is proposed that combines long short-term memory (LSTM) and convolutional neural network (CNN) in parallel. The motivation is to extract the nonlinear dynamic characteristics and the hydrodynamic memory information through the advantage of CNN and LSTM, respectively. For the feature selection, the time histories of motion states and wave heights are selected to involve sufficient information. Taken a scaled KCS as the study object, the ship motions in sea state 7 irregular long-crested waves are simulated and used for the validation. The results show that at least one period of roll motion can be accurately predicted. Compared with the single LSTM and CNN methods, the proposed method has better performance in predicting the amplitude of roll angles. Besides, the comparison results also demonstrate that selecting motion states and wave heights as feature space improves the prediction accuracy, verifying the effectiveness of the proposed method. △ Less

Submitted 7 February, 2023; v1 submitted 26 July, 2022; originally announced July 2022.

Emergent s-wave interactions between identical fermions in quasi-one-dimensional geometries

Authors: Kenneth G. Jackson, Colin J. Dale, Jeff Maki, Kevin G. S. Xie, Ben A. Olsen, Denise J. M. Ahmed-Braun, Shizhong Zhang, Joseph H. Thywissen

Abstract: Orbital degrees of freedom play an essential role in metals, semiconductors, and strongly confined electronic systems. Experiments with ultracold atoms have used highly anisotropic confinement to explore low-dimensional physics, but typically eliminate orbital degrees of freedom by preparing motional ground states in strongly confined directions. Here we prepare multi-band systems of spin-polarize… ▽ More Orbital degrees of freedom play an essential role in metals, semiconductors, and strongly confined electronic systems. Experiments with ultracold atoms have used highly anisotropic confinement to explore low-dimensional physics, but typically eliminate orbital degrees of freedom by preparing motional ground states in strongly confined directions. Here we prepare multi-band systems of spin-polarized fermionic potassium ($^{40}$K) in the quasi-one-dimensional (q1D) regime and quantify the strength of atom-atom correlations using radio-frequency spectroscopy. The activation of orbital degrees of freedom leads to a new phenomenon: a low-energy scattering channel that has even particle-exchange parity along the q1D axis, as if the underlying interactions were s-wave. This emergent exchange symmetry is enabled by orbital singlet wave functions in the strongly confined directions, which also confer high-momentum components to low-energy q1D collisions. We measure both the q1D odd-wave and even-wave "contact" parameters for the first time, and compare them to theoretical predictions of one-dimensional many-body models. The strength and spatial symmetry of interactions are tuned by a p-wave Feshbach resonance and by transverse confinement strength. Near resonance, the even-wave contact approaches its theoretical unitary value, whereas the maximum observed odd-wave contact remains several orders of magnitude below its unitary limit. Low-energy scattering channels of multi-orbital systems, such as those found here, may provide new routes for the exploration of universal many-body phenomena. △ Less

Submitted 3 February, 2023; v1 submitted 21 June, 2022; originally announced June 2022.

Comments: v2: revised manuscript

Journal ref: Physical Review X 13, 201013 (2023)

High-quality femtosecond laser surface micro/nano-structuring assisted by a thin frost layer

Authors: Wenhai Gao, Kai Zheng, Yang Liao, Henglei Du, Chengpu Liu, Chengrun Ye, Ke Liu, Shaoming Xie, Cong Chen, Junchi Chen, Yujie Peng, Yuxin Leng

Abstract: Femtosecond laser ablation has been demonstrated to be a versatile tool to produce micro/nanoscale features with high precision and accuracy. However, the use of high laser fluence to increase the ablation efficiency usually results in unwanted effects, such as redeposition of debris, formation of recast layer and heat-affected zone in or around the ablation craters. Here we circumvent this limita… ▽ More Femtosecond laser ablation has been demonstrated to be a versatile tool to produce micro/nanoscale features with high precision and accuracy. However, the use of high laser fluence to increase the ablation efficiency usually results in unwanted effects, such as redeposition of debris, formation of recast layer and heat-affected zone in or around the ablation craters. Here we circumvent this limitation by exploiting a thin frost layer with a thickness of tens of microns, which can be directly formed by the condensation of water vapor from the air onto the exposed surface whose temperature is below the freezing point. When femtosecond laser beam is focused onto the target surface covered with a thin frost layer, only the local frost layer around the laser-irradiated spot melts into water, helping to boost ablation efficiency, suppress the recast layer and reduce the heat-affect zone, while the remaining frost layer can prevent ablation debris from adhering to the target surface. By this frost-assisted strategy, high-quality surface micro/nano-structures are successfully achieved on both plane and curved surfaces at high laser fluences, and the mechanism behind the formation of high-spatial-frequency (HSF) laser induced periodic surface structures (LIPSSs) on silicon is discussed. △ Less

Submitted 15 May, 2022; originally announced May 2022.

Comments: 18 pages, 10 figures

On-Chip High Extinction Ratio Single-Stage Mach-Zehnder Interferometer based on Multimode Interferometer

Authors: Shengjie Xie, Sylvain Veilleux, Mario Dagenais

Abstract: On-chip high extinction ratio Mach-Zehnder interferometers (MZI) have always attracted interest from researchers as it can be used in many applications in astrophotonics, optical switching, programmable photonic circuits, and quantum information. However, in previous research studies, ultra-high extinction ratio on-chip MZIs have only been achieved by using a multi-stage MZI approach. In this pape… ▽ More On-chip high extinction ratio Mach-Zehnder interferometers (MZI) have always attracted interest from researchers as it can be used in many applications in astrophotonics, optical switching, programmable photonic circuits, and quantum information. However, in previous research studies, ultra-high extinction ratio on-chip MZIs have only been achieved by using a multi-stage MZI approach. In this paper, we investigate a high extinction ratio single-stage MZI based on two cascaded multimode interferometers (MMI). We determine that TM noise is an important factor that can prevent us from achieving a high extinction ratio MZI. By introducing a bend-based TM filter without additional loss, we experimentally demonstrate that such a TM filter can improve the maximum extinction ratio of the MMI-MZI by more than 10 dB. With the TM filter, we report a record high 61.2 dB extinction ratio in a single stage, thermally tunable MMI-MZI with only 1.5 dB insertion loss and more than 60nm bandwidth. These results pave the way for many interesting applications. △ Less

Submitted 4 April, 2022; originally announced April 2022.

Picosecond synchronization system for quantum networks

Authors: Raju Valivarthi, Lautaro Narváez, Samantha I. Davis, Nikolai Lauk, Cristián Peña, Si Xie, Jason P. Allmaras, Andrew D. Beyer, Boris Korzh, Andrew Mueller, Mandy Rominsky, Matthew Shaw, Emma E. Wollman, Panagiotis Spentzouris, Daniel Oblak, Neil Sinclair, Maria Spiropulu

Abstract: The operation of long-distance quantum networks requires photons to be synchronized and must account for length variations of quantum channels. We demonstrate a 200 MHz clock-rate fiber optic-based quantum network using off-the-shelf components combined with custom-made electronics and telecommunication C-band photons. The network is backed by a scalable and fully automated synchronization system… ▽ More The operation of long-distance quantum networks requires photons to be synchronized and must account for length variations of quantum channels. We demonstrate a 200 MHz clock-rate fiber optic-based quantum network using off-the-shelf components combined with custom-made electronics and telecommunication C-band photons. The network is backed by a scalable and fully automated synchronization system with ps-scale timing resolution. Synchronization of the photons is achieved by distributing O-band-wavelength laser pulses between network nodes. Specifically, we distribute photon pairs between three nodes, and measure a reduction of coincidence-to-accidental ratio from 77 to only 42 when the synchronization system is enabled, which permits high-fidelity qubit transmission. Our demonstration sheds light on the role of noise in quantum communication and represents a key step in realizing deployed co-existing classical-quantum networks. △ Less

Submitted 6 March, 2022; originally announced March 2022.

Comments: 7 pages, 7 figures

Characterization of BNL and HPK AC-LGAD sensors with a 120 GeV proton beam

Authors: Ryan Heller, Christopher Madrid, Artur Apresyan, William K. Brooks, Wei Chen, Gabriele D'Amen, Gabriele Giacomini, Ikumi Goya, Kazuhiko Hara, Sayuka Kita, Sergey Los, Adam Molnar, Koji Nakamura, Cristián Peña, Claudio San Martín, Alessandro Tricoli, Tatsuki Ueda, Si Xie

Abstract: We present measurements of AC-LGADs performed at the Fermilab's test beam facility using 120 GeV protons. We studied the performance of various strip and pad AC-LGAD sensors that were produced by BNL and HPK. The measurements are performed with our upgraded test beam setup that utilizes a high precision telescope tracker, and a simultaneous readout of up to 7 channels per sensor, which allows deta… ▽ More We present measurements of AC-LGADs performed at the Fermilab's test beam facility using 120 GeV protons. We studied the performance of various strip and pad AC-LGAD sensors that were produced by BNL and HPK. The measurements are performed with our upgraded test beam setup that utilizes a high precision telescope tracker, and a simultaneous readout of up to 7 channels per sensor, which allows detailed studies of signal sharing characteristics. These measurements allow us to assess the differences in designs between different manufacturers, and optimize them based on experimental performance. We then study several reconstruction algorithms to optimize position and time resolutions that utilize the signal sharing properties of each sensor. We present a world's first demonstration of silicon sensors in a test beam that simultaneously achieve better than 6-10 micron position and 30 ps time resolution. This represents a substantial improvement to the spatial resolution than would be obtained with binary readout of sensors with similar pitch. △ Less

Submitted 29 March, 2022; v1 submitted 19 January, 2022; originally announced January 2022.

Certified Random Number Generation from Quantum Steering

Authors: Dominick J. Joch, Sergei Slussarenko, Yuanlong Wang, Alex Pepper, Shouyi Xie, Bin-Bin Xu, Ian R. Berkman, Sven Rogge, Geoff J. Pryde

Abstract: The ultimate random number generators are those certified to be unpredictable -- including to an adversary. The use of simple quantum processes promises to provide numbers that no physical observer could predict but, in practice, unwanted noise and imperfect devices can compromise fundamental randomness and protocol security. Certified randomness protocols have been developed which remove the need… ▽ More The ultimate random number generators are those certified to be unpredictable -- including to an adversary. The use of simple quantum processes promises to provide numbers that no physical observer could predict but, in practice, unwanted noise and imperfect devices can compromise fundamental randomness and protocol security. Certified randomness protocols have been developed which remove the need for trust in devices by taking advantage of nonlocality. Here, we use a photonic platform to implement our protocol, which operates in the quantum steering scenario where one can certify randomness in a one-sided device independent framework. We demonstrate an approach for a steering-based generator of public or private randomness, and the first generation of certified random bits, with the detection loophole closed, in the steering scenario. △ Less

Submitted 17 November, 2021; originally announced November 2021.

Comments: 7 pages, 3 figures

Ultra-fast interpretable machine-learning potentials

Authors: Stephen R. Xie, Matthias Rupp, Richard G. Hennig

Abstract: All-atom dynamics simulations are an indispensable quantitative tool in physics, chemistry, and materials science, but large systems and long simulation times remain challenging due to the trade-off between computational efficiency and predictive accuracy. To address this challenge, we combine effective two- and three-body potentials in a cubic B-spline basis with regularized linear regression to… ▽ More All-atom dynamics simulations are an indispensable quantitative tool in physics, chemistry, and materials science, but large systems and long simulation times remain challenging due to the trade-off between computational efficiency and predictive accuracy. To address this challenge, we combine effective two- and three-body potentials in a cubic B-spline basis with regularized linear regression to obtain machine-learning potentials that are physically interpretable, sufficiently accurate for applications, as fast as the fastest traditional empirical potentials, and two to four orders of magnitude faster than state-of-the-art machine-learning potentials. For data from empirical potentials, we demonstrate exact retrieval of the potential. For data from density functional theory, the predicted energies, forces, and derived properties, including phonon spectra, elastic constants, and melting points, closely match those of the reference method. The introduced potentials might contribute towards accurate all-atom dynamics simulations of large atomistic systems over long time scales. △ Less

Submitted 25 May, 2023; v1 submitted 1 October, 2021; originally announced October 2021.

Investigation of the effectiveness of non-inductive `multi-harmonic' electron cyclotron current drive through modeling multi-pass absorptions in the EXL-50 spherical tokamak

Authors: D. Banerjee, S. D. Song, H. S. Xie, B. Liu, M. Y. Wang, W. J. Liu, B. Chen, L. Han, D. Luo, Y. Y. Song, Yu. V. Petrov, X. M. Song, M. S. Liu, R. W. Harvey, Y. J. Shi, Y. K. M. Peng, the EXL50 team

Abstract: The effectiveness of multiple electron cyclotron resonance (ECR) harmonics has been thoroughly investigated in context of high current drive efficiency, generally observed in fully non-inductive operation of the low aspect ratio EXL-50 spherical tokamak (ST) powered by electron cyclotron (EC) waves. The Fokker-Plank equation is numerically solved to obtain electron distribution function, under ste… ▽ More The effectiveness of multiple electron cyclotron resonance (ECR) harmonics has been thoroughly investigated in context of high current drive efficiency, generally observed in fully non-inductive operation of the low aspect ratio EXL-50 spherical tokamak (ST) powered by electron cyclotron (EC) waves. The Fokker-Plank equation is numerically solved to obtain electron distribution function, under steady state of the relativistic nonlinear Coulomb collision and quasi-linear diffusion operators, for calculating plasma current driven by the injected EC wave. For the extra-ordinary EC wave, simulation results unfold a mechanism by which electrons moving around the cold second harmonic ECR layer strongly resonate with higher harmonics via the relativistic Doppler shifted resonance condition. This feature is in fact evident above a certain value of input EC wave power in simulation, indicating it to be a non-linear phenomenon. Similar to the experimental observation, high efficiency in current drive (over 1 A/W) has indeed been found in simulation for a typical low density ($\sim 1\times10^{18}~m^{-3}$), low temperature ($\lesssim 100$ eV) plasma of EXL-50 by taking into account multi-pass absorptions in our simulation model. However, such characteristic is not found in the ordinary EC-wave study for both single-pass and multi-pass simulations, suggesting it as inefficient in driving current on our ST device. △ Less

Submitted 9 September, 2021; originally announced September 2021.

Comments: 22 pages, 15 figures. Submitted to the Nuclear Fusion journal

Sub-megahertz homogeneous linewidth for Er in Si via in situ single photon detection

Authors: Ian R. Berkman, Alexey Lyasota, Gabriele G. de Boo, John G. Bartholomew, Brett C. Johnson, Jeffrey C. McCallum, Bin-Bin Xu, Shouyi Xie, Rose L. Ahlefeldt, Matthew J. Sellars, Chunming Yin, Sven Rogge

Abstract: We studied the optical properties of a resonantly excited trivalent Er ensemble in Si accessed via in situ single photon detection. A novel approach which avoids nanofabrication on the sample is introduced, resulting in a highly efficient detection of 70 excitation frequencies, of which 63 resonances have not been observed in literature. The center frequencies and optical lifetimes of all resonanc… ▽ More We studied the optical properties of a resonantly excited trivalent Er ensemble in Si accessed via in situ single photon detection. A novel approach which avoids nanofabrication on the sample is introduced, resulting in a highly efficient detection of 70 excitation frequencies, of which 63 resonances have not been observed in literature. The center frequencies and optical lifetimes of all resonances have been extracted, showing that 5% of the resonances are within 1 GHz of our electrically detected resonances and that the optical lifetimes range from 0.5 ms up to 1.5 ms. We observed inhomogeneous broadening of less than 400 MHz and an upper bound on the homogeneous linewidth of 1.4 MHz and 0.75 MHz for two separate resonances, which is a reduction of more than an order of magnitude observed to date. These narrow optical transition properties show that Er in Si is an excellent candidate for future quantum information and communication applications. △ Less

Submitted 16 August, 2021; originally announced August 2021.

Comments: 12 pages, 13 figures

Journal ref: Phys. Rev. Applied 19, 014037 (2023)

Optical signatures of the coupled spin-mechanics of a levitated magnetic microparticle

Authors: Vanessa Wachter, Victor A. S. V. Bittencourt, Shangran Xie, Sanchar Sharma, Nicolas Joly, Philip Russell, Florian Marquardt, Silvia Viola Kusminskiy

Abstract: We propose a platform that combines the fields of cavity optomagnonics and levitated optomechanics in order to control and probe the coupled spin-mechanics of magnetic dielectric particles. We theoretically study the dynamics of a levitated Faraday-active dielectric microsphere serving as an optomagnonic cavity, placed in an external magnetic field and driven by an external laser. We find that the… ▽ More We propose a platform that combines the fields of cavity optomagnonics and levitated optomechanics in order to control and probe the coupled spin-mechanics of magnetic dielectric particles. We theoretically study the dynamics of a levitated Faraday-active dielectric microsphere serving as an optomagnonic cavity, placed in an external magnetic field and driven by an external laser. We find that the optically driven magnetization dynamics induces angular oscillations of the particle with low associated damping. Further, we show that the magnetization and angular motion dynamics can be probed via the power spectrum of the outgoing light. Namely, the characteristic frequencies attributed to the angular oscillations and the spin dynamics are imprinted in the light spectrum by two main resonance peaks. Additionally, we demonstrate that a ferromagnetic resonance setup with an oscillatory perpendicular magnetic field can enhance the resonance peak corresponding to the spin oscillations and induce fast rotations of the particle around its anisotropy axis. △ Less

Submitted 13 August, 2021; originally announced August 2021.

Comments: 22 pages, 13 figures

Upcycling Low-Nickel Polycrystalline Cathodes from Retired Electric Vehicle Batteries into Single-Crystal Nickel-Rich Cathodes

Authors: Guannan Qian, Zhiyuan Li, Yong Wang, Xianyu Xie, Yushi He, Jizhou Li, Yanhua Zhu, Zhengjie Chen, Sijie Xie, Haiying Che, Yanbin Shen, Liwei Chen, Xiaojing Huang, Zi-Feng Ma, Yijin Liu, Linsen Li

Abstract: The electrification revolution in automobile industry and others demands annual production capacity of batteries at least on the order of 102 gigawatts hours, which presents a twofold challenge to supply of key materials such as cobalt and nickel and to recycling when the batteries retire. Pyrometallurgical and hydrometallurgical recycling are currently used in industry but suffer from complexity,… ▽ More The electrification revolution in automobile industry and others demands annual production capacity of batteries at least on the order of 102 gigawatts hours, which presents a twofold challenge to supply of key materials such as cobalt and nickel and to recycling when the batteries retire. Pyrometallurgical and hydrometallurgical recycling are currently used in industry but suffer from complexity, high costs, and secondary pollution. Here we report a direct-recycling method in molten salts (MSDR) that is environmentally benign and value-creating based on a techno-economic analysis using real-world data and price information. We also experimentally demonstrate the feasibility of MSDR by upcycling a low-nickel polycrystalline LiNi0.5Mn0.3Co0.2O2 (NMC) cathode material that is widely used in early-year electric vehicles into Ni-rich (Ni > 65%) single-crystal NMCs with increased energy-density (>10% increase) and outstanding electrochemical performance (>94% capacity retention after 500 cycles in pouch-type full cells). This work opens up new opportunities for closed-loop recycling of electric vehicle batteries and manufacturing of next-generation NMC cathode materials. △ Less

Submitted 21 August, 2021; v1 submitted 7 August, 2021; originally announced August 2021.

Combined analysis of HPK 3.1 LGADs using a proton beam, beta source, and probe station towards establishing high volume quality control

Authors: Ryan Heller, Andrés Abreu, Artur Apresyan, Roberta Arcidiacono, Nicolò Cartiglia, Karri DiPetrillo, Marco Ferrero, Meraj Hussain, Margaret Lazarovitz, Hakseong Lee, Sergey Los, Chang-Seong Moon, Cristián Peña, Federico Siviero, Valentina Sola, Tanvi Wamorkar, Si Xie

Abstract: The upgrades of the CMS and ATLAS experiments for the high luminosity phase of the Large Hadron Collider will employ precision timing detectors based on Low Gain Avalanche Detectors (LGADs). We present a suite of results combining measurements from the Fermilab Test Beam Facility, a beta source telescope, and a probe station, allowing full characterization of the HPK type 3.1 production of LGAD pr… ▽ More The upgrades of the CMS and ATLAS experiments for the high luminosity phase of the Large Hadron Collider will employ precision timing detectors based on Low Gain Avalanche Detectors (LGADs). We present a suite of results combining measurements from the Fermilab Test Beam Facility, a beta source telescope, and a probe station, allowing full characterization of the HPK type 3.1 production of LGAD prototypes developed for these detectors. We demonstrate that the LGAD response to high energy test beam particles is accurately reproduced with a beta source. We further establish that probe station measurements of the gain implant accurately predict the particle response and operating parameters of each sensor, and conclude that the uniformity of the gain implant in this production is sufficient to produce full-sized sensors for the ATLAS and CMS timing detectors. △ Less

Submitted 16 April, 2021; originally announced April 2021.

Comments: 20 page, 20 figures

Test beam characterization of sensor prototypes for the CMS Barrel MIP Timing Detector

Authors: R. Abbott, A. Abreu, F. Addesa, M. Alhusseini, T. Anderson, Y. Andreev, A. Apresyan, R. Arcidiacono, M. Arenton, E. Auffray, D. Bastos, L. A. T. Bauerdick, R. Bellan, M. Bellato, A. Benaglia, M. Benettoni, R. Bertoni, M. Besancon, S. Bharthuar, A. Bornheim, E. Brücken, J. N. Butler, C. Campagnari, M. Campana, R. Carlin , et al. (174 additional authors not shown)

Abstract: The MIP Timing Detector will provide additional timing capabilities for detection of minimum ionizing particles (MIPs) at CMS during the High Luminosity LHC era, improving event reconstruction and pileup rejection. The central portion of the detector, the Barrel Timing Layer (BTL), will be instrumented with LYSO:Ce crystals and Silicon Photomultipliers (SiPMs) providing a time resolution of about… ▽ More The MIP Timing Detector will provide additional timing capabilities for detection of minimum ionizing particles (MIPs) at CMS during the High Luminosity LHC era, improving event reconstruction and pileup rejection. The central portion of the detector, the Barrel Timing Layer (BTL), will be instrumented with LYSO:Ce crystals and Silicon Photomultipliers (SiPMs) providing a time resolution of about 30 ps at the beginning of operation, and degrading to 50-60 ps at the end of the detector lifetime as a result of radiation damage. In this work, we present the results obtained using a 120 GeV proton beam at the Fermilab Test Beam Facility to measure the time resolution of unirradiated sensors. A proof-of-concept of the sensor layout proposed for the barrel region of the MTD, consisting of elongated crystal bars with dimensions of about 3 x 3 x 57 mm$^3$ and with double-ended SiPM readout, is demonstrated. This design provides a robust time measurement independent of the impact point of the MIP along the crystal bar. We tested LYSO:Ce bars of different thickness (2, 3, 4 mm) with a geometry close to the reference design and coupled to SiPMs manufactured by Hamamatsu and Fondazione Bruno Kessler. The various aspects influencing the timing performance such as the crystal thickness, properties of the SiPMs (e.g. photon detection efficiency), and impact angle of the MIP are studied. A time resolution of about 28 ps is measured for MIPs crossing a 3 mm thick crystal bar, corresponding to an MPV energy deposition of 2.6 MeV, and of 22 ps for the 4.2 MeV MPV energy deposition expected in the BTL, matching the detector performance target for unirradiated devices. △ Less

Submitted 16 July, 2021; v1 submitted 15 April, 2021; originally announced April 2021.

Journal ref: Journal of Instrumentation, Volume 16, July 2021

Position Measurement of Multiple Microparticles in Hollow-Core Photonic Crystal Fiber by Coherent Optical Frequency Domain Reflectometry

Authors: Jasper Podschus, Max Koeppel, Bernhard Schmauss, Abhinav Sharma, Sanju Sundaramahalingam, Shangran Xie, Philip St. J. Russell

Abstract: Flying particle sensors in hollow-core photonic crystal fibers require accurate localization of the optically trapped microparticles. We report position measurement to micrometer-resolution, using optical frequency domain reflectometry, of two 1.65-$μ$m-diameter polystyrene particles. Flying particle sensors in hollow-core photonic crystal fibers require accurate localization of the optically trapped microparticles. We report position measurement to micrometer-resolution, using optical frequency domain reflectometry, of two 1.65-$μ$m-diameter polystyrene particles. △ Less

Submitted 23 March, 2021; originally announced March 2021.

Comments: 4 pages, 3 figures, Accepted for presentation at the 27th International Conference on Optical Fibre Sensors (OFS) 2020, Alexandria, Virginia, USA

Voltage-Controlled Reversible Modulation of Colloidal Quantum Dot Thin Film Photoluminescence

Authors: Sihan Xie, Han Zhu, Melissa Li, Vladimir Bulović

Abstract: Active modulation of quantum dot thin film photoluminescence (PL) has far-reaching potential applications in biomedical and optoelectronic systems, but challenges remain in achieving large PL modulation depth and fast temporal response. Here we report an efficient voltage-controlled optical down-converter by optically exciting a colloidal quantum dot thin film within a quantum dot light-emitting d… ▽ More Active modulation of quantum dot thin film photoluminescence (PL) has far-reaching potential applications in biomedical and optoelectronic systems, but challenges remain in achieving large PL modulation depth and fast temporal response. Here we report an efficient voltage-controlled optical down-converter by optically exciting a colloidal quantum dot thin film within a quantum dot light-emitting diode (QD-LED) under reverse bias. Utilizing field-induced luminescence quenching, we show that a large electric field can strongly modify carrier dynamics in this nanostructured device, resulting in stable and reversible photoluminescence quenching. The device exhibits photoluminescence reduction of up to 99.5%, corresponding to a contrast ratio of 200:1, under the applied electric field of 3 MV/cm, with a 300 nanosecond response time. Using excitation wavelength dependent and transient PL spectroscopy, we further show that the high degree of quenching is achieved by a synergistic interplay of quantum-confined Stark effect (QCSE) and field-induced exciton dissociation. △ Less

Submitted 12 August, 2020; originally announced August 2020.

Integrated Arbitrary Filter with Spiral Gratings: Design and Characterization

Authors: Yi-Wen Hu, Shengjie Xie, Jiahao Zhan, Yang Zhang, Sylvain Veilleux, Mario Dagenais

Abstract: We report the design and characterization of a high performance integrated arbitrary filter from 1450 nm to 1640 nm. The filter's target spectrum is chosen to suppress the night-sky OH emission lines, which is critical for ground-based astronomical telescopes. This type of filter is featured by its large spectral range, high rejection ratio and narrow notch width. Traditionally it is only successf… ▽ More We report the design and characterization of a high performance integrated arbitrary filter from 1450 nm to 1640 nm. The filter's target spectrum is chosen to suppress the night-sky OH emission lines, which is critical for ground-based astronomical telescopes. This type of filter is featured by its large spectral range, high rejection ratio and narrow notch width. Traditionally it is only successfully accomplished with fiber Bragg gratings. The technique we demonstrate here is proven to be very efficient for on-chip platforms, which can bring many benefits for device footprint, performance and cost. For the design part, two inverse scattering algorithms are compared, the frequency domain discrete layer-peeling (f-DLP) and the time domain discrete layer-peeling (t-DLP). f-DLP is found to be superior for the grating reconstruction in terms of accuracy and robustness. A method is proposed to resolve the non-uniformity issue caused by the non-zero layer size in the DLP algorithm. The designed 55-notch filter is 50-mm-long and implemented on a compact Si3N4/SiO2 spiral waveguide with a total length of 63 mm. Experimentally, we demonstrate that the device has a insertion loss as low as 2.5 dB, and that the waveguide propagation loss is as low as 0.10 dB/cm. We are also able to achieve uniform notch depths and 3-dB widths of about 28 dB and 0.22 nm, respectively. △ Less

Submitted 31 May, 2020; originally announced June 2020.

Comments: 8 pages, 8 figures, accepted for publication in Journal of Lightwave Technology

A Gd@C82-based single molecular electret device with switchable electrical polarization

Authors: Kangkang Zhang, Cong Wang, Minhao Zhang, Zhanbin Bai, Fangfang Xie, Yuanzhi Tan, Yilv Guo, Kuo-Juei Hu, Lu Cao, Shuai Zhang, Xuecou Tu, Lin Kang, Jian Chen, Peiheng Wu, Xuefeng Wang, Jinlan Wang, Junming Liu, Baigeng Wang, Guanghou Wang, Suyuan Xie, Wei Ji, Su-Fei Shi, M. A. Reed, Fengqi Song

Abstract: Single molecular electrets exhibiting single molecule electric polarization switching have been long desired as a platform for extremely small non-volatile storage devices, although it is controversial because of the poor stability of single molecular electric dipoles. Here we study the single molecular device of GdC82, where the encapsulated Gd atom forms a charge center, and we have observed a g… ▽ More Single molecular electrets exhibiting single molecule electric polarization switching have been long desired as a platform for extremely small non-volatile storage devices, although it is controversial because of the poor stability of single molecular electric dipoles. Here we study the single molecular device of GdC82, where the encapsulated Gd atom forms a charge center, and we have observed a gate controlled switching behavior between two sets of single electron transport stability diagrams. The switching is operated in a hysteresis loop with a coercive gate field of around 0.5Vnm. Theoretical calculations have assigned the two conductance diagrams to corresponding energy levels of two states that the Gd atom is trapped at two different sites of the C82 cage, which possess two different permanent electrical dipole orientations. The two dipole states are stabilized by the anisotropic energy and separated by a transition energy barrier of 70 meV. Such switching is then accessed to the electric field driven reorientation of individual dipole while overcoming the barriers by the coercive gate field, and demonstrates the creation of a single molecular electret. △ Less

Submitted 24 March, 2020; originally announced March 2020.

CACTUS: A depleted monolithic active timing sensor using a CMOS radiation hard technology

Authors: Yavuz Degerli, Fabrice Guilloux, Claude Guyot, Jean-Pierre Meyer, Ahmimed Ouraou, Philippe Schwemling, Artur Apresyan, Ryan E. Heller, Mohd Meraj, Christian Pena, Si Xie, Tomasz Hemperek

Abstract: The planned luminosity increase at the Large Hadron Collider in the coming years has triggered interest in the use of the particles' time of arrival as additional information in specialized detectors to mitigate the impact of pile-up. The required time resolution is of the order of tens of picoseconds, with a spatial granularity of the order of 1 mm. A time measurement at this precision level will… ▽ More The planned luminosity increase at the Large Hadron Collider in the coming years has triggered interest in the use of the particles' time of arrival as additional information in specialized detectors to mitigate the impact of pile-up. The required time resolution is of the order of tens of picoseconds, with a spatial granularity of the order of 1 mm. A time measurement at this precision level will also be of interest beyond the LHC and beyond high energy particle physics. We present in this paper the first developments towards a radiation hard Depleted Monolithic Active Pixel Sensor (DMAPS), with high-resolution time measurement capability. The technology chosen is a standard high voltage CMOS process, in conjunction with a high resistivity detector material, which has already proven to efficiently detect particles in tracking applications after several hundred of Mrad of irradiation. △ Less

Submitted 6 May, 2020; v1 submitted 9 March, 2020; originally announced March 2020.

Comments: 14 pages, 11 figures

Chirp effects on pair production in oscillating electric fields with spatial inhomogeneity

Authors: Mamutjan Ababekri, Sayipjamal Dulat, B. S. Xie, Jun Zhang

Abstract: Dirac-Heisenberg-Wigner formalism is used to study chirp effects on the vacuum pair creation under inhomogeneous electric fields. For rapidly oscillating electric fields, the particle momentum spectrum is sensitive to both of the spatial scale and the chirp parameter, and the external field width has less significant effect for the maximally large chirp. For slowly oscillating electric fields, chi… ▽ More Dirac-Heisenberg-Wigner formalism is used to study chirp effects on the vacuum pair creation under inhomogeneous electric fields. For rapidly oscillating electric fields, the particle momentum spectrum is sensitive to both of the spatial scale and the chirp parameter, and the external field width has less significant effect for the maximally large chirp. For slowly oscillating electric fields, chirp effects could be identified at large spatial extents and the carrier phase plays a significant role reflecting chirp effects even at small spatial scales. We also notice that, the local density approximation holds for all external field profiles considered in this work at the quasihomogeneous limit allowing one to use arguments from homogeneous scenarios to analyze inhomogeneous results. △ Less

Submitted 20 February, 2020; v1 submitted 6 December, 2019; originally announced December 2019.

Comments: 17 pages, 8 figures

On-the-fly particle metrology in hollow-core photonic crystal fibre

Authors: Abhinav Sharma, Shangran Xie, Richard Zeltner, Philip St. J. Russell

Abstract: Efficient monitoring of airborne particulate matter (PM), especially particles with aerodynamic diameter less than 2.5 um (PM2.5), is crucial for improving public health. Reliable information on the concentration, size distribution and chemical characteristics of PMs is key to evaluating air pollution and identifying its sources. Standard methods for PM2.5 characterization require sample collectio… ▽ More Efficient monitoring of airborne particulate matter (PM), especially particles with aerodynamic diameter less than 2.5 um (PM2.5), is crucial for improving public health. Reliable information on the concentration, size distribution and chemical characteristics of PMs is key to evaluating air pollution and identifying its sources. Standard methods for PM2.5 characterization require sample collection from the atmosphere and post-analysis using sophisticated equipment in a laboratory environment, and are normally very time-consuming. Although optical methods based on analysis of scattering of free-space laser beams or evanescent fields are in principle suitable for real-time particle counting and sizing, lack of knowledge of the refractive index in these methods not only leads to inevitable sizing ambiguity but also prevents identification of the particle material. In the case of evanescent wave detection, the system lifetime is strongly limited by adhesion of particles to the surfaces. Here we report a novel technique for airborne particle metrology based on hollow-core photonic crystal fibre. It offers in situ particle counting, sizing and refractive index measurement with effectively unlimited device lifetime, and relies on optical forces that automatically capture airborne particles in front of the hollow core and propel them into the fibre. The resulting transmission drop, together with the time-of-flight of the particles passing through the fibre, provide unambiguous mapping of particle size and refractive index with high accuracy. The technique represents a considerable advance over currently available real-time particle metrology systems, and can be directly applied to monitoring air pollution in the open atmosphere as well as precise particle characterization in a local environment such as a closed room or a reaction vessel. △ Less

Submitted 21 July, 2019; originally announced July 2019.

Extremely terahertz electric-field enhancement in a high-Q photonic crystal slab cavity with nanoholes

Authors: Qijing Lu, Xiaogang Chen, Chang-Ling Zou, Shusen Xie

Abstract: A one-dimensional photonic-crystal (PC) cavity with nanoholes is proposed for extremely enhancing the THz electric fields by utilizing the electromagnetic (EM) boundary conditions, where both slot effect (for the perpendicular component of the electric displacement field) and anti-slot effect (for the parallel component of the electric field) contribute to the considerable field enhancement. The E… ▽ More A one-dimensional photonic-crystal (PC) cavity with nanoholes is proposed for extremely enhancing the THz electric fields by utilizing the electromagnetic (EM) boundary conditions, where both slot effect (for the perpendicular component of the electric displacement field) and anti-slot effect (for the parallel component of the electric field) contribute to the considerable field enhancement. The EM energy density can be enhanced in the high refractive index material by a factor of (εh/εl)^2, where εh and εl are the permittivities of the high and low refractive index materials, respectively. Correspondingly, the mode volume can be enhanced by a factor of 288 as compared with the regular THz PC cavity and is three orders of magnitude smaller than the diffraction limitation. While the proposed THz cavity design also supports the modes with high Q > 10^4, which lead to strong Purcell enhancement of spontaneous emission by a factor exceeds 10^6. Our THz cavity design is feasible and appealing for experimental demonstrations, since the semiconductor layer where the EM is maximized can naturally be filled with a quantum engineered active materials, which is potential for developing the room-temperature coherent THz radiation sources. △ Less

Submitted 25 July, 2018; originally announced July 2018.

Identification of Long-lived Charged Particles using Time-Of-Flight Systems at the Upgraded LHC detectors

Authors: O. Cerri, S. Xie, Cristian Peña, Maria Spiropulu

Abstract: We study the impact of picosecond precision timing detection systems on the LHC experiments' long-lived particle search program during the HL-LHC era. We develop algorithms that allow us to reconstruct the mass of such charged particles and perform particle identification using the time-of-flight measurement. We investigate the reach for benchmark scenarios as a function of the timing resolution,… ▽ More We study the impact of picosecond precision timing detection systems on the LHC experiments' long-lived particle search program during the HL-LHC era. We develop algorithms that allow us to reconstruct the mass of such charged particles and perform particle identification using the time-of-flight measurement. We investigate the reach for benchmark scenarios as a function of the timing resolution, and find sensitivity improvement of up to a factor of ten, depending on the new heavy particle mass. △ Less

Submitted 10 January, 2019; v1 submitted 14 July, 2018; originally announced July 2018.

Comments: 20 pages, 13 figures

Optomechanical cooling and self-stabilization of a waveguide coupled to a whispering-gallery-mode resonator

Authors: Riccardo Pennetta, Shangran Xie, Richard Zeltner, Jonas Hammer, Philip St. J. Russell

Abstract: Laser cooling of mechanical degrees of freedom is one of the most significant achievements in the field of opto-mechanics. Here, we report, for the first time to the best of our knowledge, efficient passive optomechanical cooling of the motion of a freestanding waveguide coupled to a whispering-gallery-mode (WGM) resonator. The waveguide is an 8 mm long glass-fiber nanospike, which has a fundament… ▽ More Laser cooling of mechanical degrees of freedom is one of the most significant achievements in the field of opto-mechanics. Here, we report, for the first time to the best of our knowledge, efficient passive optomechanical cooling of the motion of a freestanding waveguide coupled to a whispering-gallery-mode (WGM) resonator. The waveguide is an 8 mm long glass-fiber nanospike, which has a fundamental flexural resonance at Ω/2π = 2.5 kHz and a Q-factor of 1.2 10**5. Upon launching 250 μW laser power at an optical frequency close to the WGM resonant frequency, we observed cooling of the nanospike resonance from room temperature down to 1.8 K. Simultaneous cooling of the first higher-order mechanical mode is also observed. The strong suppression of the overall Brownian motion of the nanospike, observed as an 11.6 dB reduction in its mean square displacement, indicates strong optomechanical stabilization of linear coupling between the nanospike and the cavity mode. The cooling is caused predominantly by a combination of photothermal effects and optical forces between nanospike and WGM resonator. The results are of direct relevance in the many applications of WGM resonators, including atom physics, optomechanics, and sensing. △ Less

Submitted 1 September, 2020; v1 submitted 24 April, 2018; originally announced April 2018.

Comments: 13 pages, 7 figures

Journal ref: Photon. Res. 8, 844-851 (2020)

Quardratic Electromechanical Strain in Silicon Investigated by Scanning Probe Microscopy

Authors: Junxi Yu, Ehsan Nasr Esfahani, Qingfeng Zhu, Dongliang Shan, Tingting Jia, Shuhong Xie, Jiangyu Li

Abstract: Piezoresponse force microscopy (PFM) is a powerful tool widely used to characterize piezoelectricity and ferroelectricity at the nanoscale. However, it is necessary to distinguish microscopic mechanisms between piezoelectricity and non-piezoelectric contributions measured by PFM. In this work, we systematically investigate the first and second harmonic apparent piezoresponses of silicon wafer in b… ▽ More Piezoresponse force microscopy (PFM) is a powerful tool widely used to characterize piezoelectricity and ferroelectricity at the nanoscale. However, it is necessary to distinguish microscopic mechanisms between piezoelectricity and non-piezoelectric contributions measured by PFM. In this work, we systematically investigate the first and second harmonic apparent piezoresponses of silicon wafer in both vertical and lateral modes, and we show that it exhibits apparent electromechanical response that is quadratic to the applied electric field, possibly arising from ionic electrochemical dipoles induced by the charged probe. As a result, the electromechanical response measured is dominated by the second harmonic response in vertical mode, and its polarity can be switched by the DC voltage with evolving coercive field and maximum amplitude, in sharp contrast with typical ferroelectric materials we used as control. The ionic activity in silicon is also confirmed by scanning thermo-ionic microscopy (STIM) measurement, and this work points toward a set of methods to distinguish true piezoelectricity from the apparent ones. △ Less

Submitted 24 April, 2018; v1 submitted 30 January, 2018; originally announced January 2018.

Journal ref: Journal of Applied Physics 123, 155104 (2018)

Strain Mapping of Two-Dimensional Heterostructures with Sub-Picometer Precision

Authors: Yimo Han, Kayla Nguyen, Michael Cao, Paul Cueva, Saien Xie, Mark W. Tate, Prafull Purohit, Sol M. Gruner, Jiwoong Park, David A. Muller

Abstract: Next-generation, atomically thin devices require in-plane, one-dimensional heterojunctions to electrically connect different two-dimensional (2D) materials. However, the lattice mismatch between most 2D materials leads to unavoidable strain, dislocations, or ripples, which can strongly affect their mechanical, optical, and electronic properties. We have developed an approach to map 2D heterojuncti… ▽ More Next-generation, atomically thin devices require in-plane, one-dimensional heterojunctions to electrically connect different two-dimensional (2D) materials. However, the lattice mismatch between most 2D materials leads to unavoidable strain, dislocations, or ripples, which can strongly affect their mechanical, optical, and electronic properties. We have developed an approach to map 2D heterojunction lattice and strain profiles with sub-picometer precision and to identify dislocations and out-of-plane ripples. We collected diffraction patterns from a focused electron beam for each real-space scan position with a high-speed, high dynamic range, momentum-resolved detector - the electron microscope pixel array detector (EMPAD). The resulting four-dimensional (4D) phase space datasets contain the full spatially resolved lattice information of the sample. By using this technique on tungsten disulfide (WS2) and tungsten diselenide (WSe2) lateral heterostructures, we have mapped lattice distortions with 0.3 pm precision across multi-micron fields of view and simultaneously observed the dislocations and ripples responsible for strain relaxation in 2D laterally-epitaxial structures. △ Less

Submitted 24 January, 2018; originally announced January 2018.

Flying Particle Microlaser and Temperature Sensor in Hollow-Core Photonic Crystal Fiber

Authors: Richard Zeltner, Riccardo Pennetta, Shangran Xie, Philip St. J. Russell

Abstract: Whispering-gallery mode (WGM) resonators combine small optical mode volumes with narrow resonance linewidths, making them exciting platforms for a variety of applications. Here we report a flying WGM microlaser, realized by optically trapping a dye-doped microparticle within a liquid-filled hollow-core photonic crystal fiber (HC-PCF) using a CW laser and then pumping it with a pulsed excitation la… ▽ More Whispering-gallery mode (WGM) resonators combine small optical mode volumes with narrow resonance linewidths, making them exciting platforms for a variety of applications. Here we report a flying WGM microlaser, realized by optically trapping a dye-doped microparticle within a liquid-filled hollow-core photonic crystal fiber (HC-PCF) using a CW laser and then pumping it with a pulsed excitation laser whose wavelength matches the absorption band of the dye. The laser emits into core-guided modes that can be detected at the endfaces of the HC-PCF. Using radiation forces, the microlaser can be freely propelled along the HC-PCF over multi-cm distances - orders of magnitude further than in previous experiments where tweezers and fiber traps were used. The system can be used to measure temperature with high spatial resolution, by exploiting the temperature-dependent frequency shift of the lasing modes, and also for precise delivery of light to remote locations. △ Less

Submitted 6 October, 2017; originally announced October 2017.

Long-range optical trapping and binding of microparticles in hollow-core photonic crystal fibre

Authors: Dmitry S. Bykov, Shangran Xie, Richard Zeltner, Andrey Machnev, Gordon K. L. Wong, Tijmen G. Euser, Philip St. J. Russell

Abstract: Optically levitated micro- and nanoparticles offer an ideal playground for investigating photon-phonon interactions over macroscopic distances. Here we report the observation of long-range optical binding of multiple microparticles, mediated by intermodal scattering and interference inside the evacuated core of a hollow-core photonic crystal fibre (HC-PCF). Three polystyrene particles with 1 μm di… ▽ More Optically levitated micro- and nanoparticles offer an ideal playground for investigating photon-phonon interactions over macroscopic distances. Here we report the observation of long-range optical binding of multiple microparticles, mediated by intermodal scattering and interference inside the evacuated core of a hollow-core photonic crystal fibre (HC-PCF). Three polystyrene particles with 1 μm diameter are stably bound together with an inter-particle distance of ~40 μm, or 50 times longer than the wavelength of the trapping laser. The bound-particle array can be translated to-and-fro over centimetre distances along the fibre. When evacuated to 6 mbar gas pressure, the collective mechanical modes of the bound-particle array could be observed. The measured inter-particle distance at equilibrium and mechanical eigen-frequencies are supported by a novel analytical formalism modelling the dynamics of the binding process. The HC-PCF system offers a unique platform for investigating the rich optomechanical dynamics of arrays of levitated particles in a well-isolated and protected environment. △ Less

Submitted 12 September, 2017; originally announced September 2017.

IAD: Interaction-Aware Diffusion Framework in Social Networks

Authors: Xi Zhang, Yuan Su, Siyu Qu, Sihong Xie, Binxing Fang, Philip S. Yu

Abstract: In networks, multiple contagions, such as information and purchasing behaviors, may interact with each other as they spread simultaneously. However, most of the existing information diffusion models are built on the assumption that each individual contagion spreads independently, regardless of their interactions. Gaining insights into such interaction is crucial to understand the contagion adoptio… ▽ More In networks, multiple contagions, such as information and purchasing behaviors, may interact with each other as they spread simultaneously. However, most of the existing information diffusion models are built on the assumption that each individual contagion spreads independently, regardless of their interactions. Gaining insights into such interaction is crucial to understand the contagion adoption behaviors, and thus can make better predictions. In this paper, we study the contagion adoption behavior under a set of interactions, specifically, the interactions among users, contagions' contents and sentiments, which are learned from social network structures and texts. We then develop an effective and efficient interaction-aware diffusion (IAD) framework, incorporating these interactions into a unified model. We also present a generative process to distinguish user roles, a co-training method to determine contagions' categories and a new topic model to obtain topic-specific sentiments. Evaluation on large-scale Weibo dataset demonstrates that our proposal can learn how different users, contagion categories and sentiments interact with each other efficiently. With these interactions, we can make a more accurate prediction than the state-of-art baselines. Moreover, we can better understand how the interactions influence the propagation process and thus can suggest useful directions for information promotion or suppression in viral marketing. △ Less

Submitted 25 June, 2018; v1 submitted 6 September, 2017; originally announced September 2017.

Comments: submitted to IEEE TKDE (in review) This has been improved according to the reviewers' comments, and also includes detailed results in Sec. 6.2.1 which are not fully presented in the TKDE version due to space limits

Comparisons and Applications of Four Independent Numerical Approaches for Linear Gyrokinetic Drift Modes

Authors: H. S. Xie, Y. Y. Li, Z. X. Lu, W. K. Ou, B. Li

Abstract: To help reveal the complete picture of linear kinetic drift modes, four independent numerical approaches, based on integral equation, Euler initial value simulation, Euler matrix eigenvalue solution and Lagrangian particle simulation, respectively, are used to solve the linear gyrokinetic electrostatic drift modes equation in Z-pinch with slab simplification and in tokamak with ballooning space co… ▽ More To help reveal the complete picture of linear kinetic drift modes, four independent numerical approaches, based on integral equation, Euler initial value simulation, Euler matrix eigenvalue solution and Lagrangian particle simulation, respectively, are used to solve the linear gyrokinetic electrostatic drift modes equation in Z-pinch with slab simplification and in tokamak with ballooning space coordinate. We identify that these approaches can yield the same solution with the difference smaller than 1\%, and the discrepancies mainly come from the numerical convergence, which is the first detailed benchmark of four independent numerical approaches for gyrokinetic linear drift modes. Using these approaches, we find that the entropy mode and interchange mode are on the same branch in Z-pinch, and the entropy mode can have both electron and ion branches. And, at strong gradient, more than one eigenstate of the ion temperature gradient mode (ITG) can be unstable and the most unstable one can be on non-ground eigenstates. The propagation of ITGs from ion to electron diamagnetic direction at strong gradient is also observed, which implies that the propagation direction is not a decisive criterion for the experimental diagnosis of turbulent mode at the edge plasmas. △ Less

Submitted 13 June, 2017; originally announced June 2017.

Comments: 12 pages, 10 figures, accept by Physics of Plasmas

Journal ref: Physics of Plasmas 24, 072106 (2017)

A New Paradigm for Turbulent Transport Across a Steep Gradient in Toroidal Plasmas

Authors: H. S. Xie, Y. Xiao, Z. Lin

Abstract: First principle gyrokinetic simulation of the edge turbulent transport in toroidal plasmas finds a reverse trend in the turbulent transport coefficients under strong gradients. It is found that there exist both linear and nonlinear critical gradients for the nonmonotonicity of transport characteristics. The discontinuity of transport flux slope around the turning gradient shows features of second… ▽ More First principle gyrokinetic simulation of the edge turbulent transport in toroidal plasmas finds a reverse trend in the turbulent transport coefficients under strong gradients. It is found that there exist both linear and nonlinear critical gradients for the nonmonotonicity of transport characteristics. The discontinuity of transport flux slope around the turning gradient shows features of second order phase transition. Under strong gradient the most unstable modes are in non-ground eigenstates with unconventional mode structures, which significantly reduces the effective correlation length and thus reverse the transport trend. Our results suggest a completely new mechanism for the low to high confinement mode transition without invoking shear flow or zonal flow. △ Less

Submitted 1 February, 2017; originally announced February 2017.

Comments: 5 pages, 7 figures, accepted by Phys. Rev. Lett

Journal ref: Phys. Rev. Lett. 118, 095001 (2017)

Broadband, Lensless and Optomechanically Stabilised Coupling into Microfluidic Hollow-Core Photonic Crystal Fiber Using Glass Nanospike

Authors: Richard Zeltner, Shangran Xie, Riccardo Pennetta, Philip St. J. Russell

Abstract: We report a novel technique for launching broadband laser light into liquid-filled hollow-core photonic crystal fiber (HC-PCF). It uniquely offers self-alignment and self-stabilization via optomechanical trapping of a fused silica nanospike, fabricated by thermally tapering and chemically etching a single mode fiber into a tip diameter of 350 nm. We show that a trapping laser, delivering ~300 mW a… ▽ More We report a novel technique for launching broadband laser light into liquid-filled hollow-core photonic crystal fiber (HC-PCF). It uniquely offers self-alignment and self-stabilization via optomechanical trapping of a fused silica nanospike, fabricated by thermally tapering and chemically etching a single mode fiber into a tip diameter of 350 nm. We show that a trapping laser, delivering ~300 mW at 1064 nm, can be used to optically align and stably maintain the nanospike at the core center. Once this is done, a broadband supercontinuum beam (~575 to 1064 nm) can be efficiently and close to achromatically launched in the HC-PCF. The system is robust against liquid-flow in either direction inside the HC-PCF and the Fresnel back-reflections are reduced to negligible levels compared to free-space launching or butt-coupling. The results are of potential relevance for any application where the efficient delivery of broadband light into liquid-core waveguides is desired. △ Less

Submitted 15 November, 2016; originally announced November 2016.

High-speed real-time single-pixel microscopy based on Fourier sampling

Authors: Qiang Guo, Hongwei Chen, Yuxi Wang, Yong Guo, Peng Liu, Xiurui Zhu, Zheng Cheng, Zhenming Yu, Minghua Chen, Sigang Yang, Shizhong Xie

Abstract: Single-pixel cameras based on the concepts of compressed sensing (CS) leverage the inherent structure of images to retrieve them with far fewer measurements and operate efficiently over a significantly broader spectral range than conventional silicon-based cameras. Recently, photonic time-stretch (PTS) technique facilitates the emergence of high-speed single-pixel cameras. A significant breakthrou… ▽ More Single-pixel cameras based on the concepts of compressed sensing (CS) leverage the inherent structure of images to retrieve them with far fewer measurements and operate efficiently over a significantly broader spectral range than conventional silicon-based cameras. Recently, photonic time-stretch (PTS) technique facilitates the emergence of high-speed single-pixel cameras. A significant breakthrough in imaging speed of single-pixel cameras enables observation of fast dynamic phenomena. However, according to CS theory, image reconstruction is an iterative process that consumes enormous amounts of computational time and cannot be performed in real time. To address this challenge, we propose a novel single-pixel imaging technique that can produce high-quality images through rapid acquisition of their effective spatial Fourier spectrum. We employ phase-shifting sinusoidal structured illumination instead of random illumination for spectrum acquisition and apply inverse Fourier transform to the obtained spectrum for image restoration. We evaluate the performance of our prototype system by recognizing quick response (QR) codes and flow cytometric screening of cells. A frame rate of 625 kHz and a compression ratio of 10% are experimentally demonstrated in accordance with the recognition rate of the QR code. An imaging flow cytometer enabling high-content screening with an unprecedented throughput of 100,000 cells/s is also demonstrated. For real-time imaging applications, the proposed single-pixel microscope can significantly reduce the time required for image reconstruction by two orders of magnitude, which can be widely applied in industrial quality control and label-free biomedical imaging. △ Less

Submitted 14 June, 2016; originally announced June 2016.

Effect of ion mass on pair production in the interaction of an ultraintense laser with overdense plasmas

Authors: F. Wan, C. Lv, M. R. Jia, H. Y. Wang, B. S. Xie

Abstract: The effect of ion mass on pair production in the interaction of an ultraintense laser with overdense plasmas has been explored by particle-in-cell (PIC) simulation. It is found that the heavier ion mass excites the higher and broader electrostatic field, which is responsible for the enhancement of backward photon number. The pair yields are also reinforced due to the increase of head-on collision… ▽ More The effect of ion mass on pair production in the interaction of an ultraintense laser with overdense plasmas has been explored by particle-in-cell (PIC) simulation. It is found that the heavier ion mass excites the higher and broader electrostatic field, which is responsible for the enhancement of backward photon number. The pair yields are also reinforced due to the increase of head-on collision of backwards photon with incoming laser. By examining the density evolution and angle distribution of each particle species the origin of pair yields enhancement has been clarified further. △ Less

Submitted 21 May, 2016; originally announced May 2016.

Comments: 12 pages, 6 figures, submit to PRE

Scattering correction based on regularization de-convolution for Cone-Beam CT

Authors: Shi-peng Xie, Rui-ju Yan

Abstract: In Cone-Beam CT (CBCT) imaging systems, the scattering phenomenon has a significant impact on the reconstructed image and is a long-lasting research topic on CBCT. In this paper, we propose a simple, novel and fast approach for mitigating scatter artifacts and increasing the image contrast in CBCT, belonging to the category of convolution-based method in which the projected data is de-convolved wi… ▽ More In Cone-Beam CT (CBCT) imaging systems, the scattering phenomenon has a significant impact on the reconstructed image and is a long-lasting research topic on CBCT. In this paper, we propose a simple, novel and fast approach for mitigating scatter artifacts and increasing the image contrast in CBCT, belonging to the category of convolution-based method in which the projected data is de-convolved with a convolution kernel. A key step in this method is how to determine the convolution kernel. Compared with existing methods, the estimation of convolution kernel is based on bi-l1-l2-norm regularization imposed on both the intermediate the known scatter contaminated projection images and the convolution kernel. Our approach can reduce the scatter artifacts from 12.930 to 2.133. △ Less

Submitted 6 April, 2016; originally announced April 2016.

Comments: 16 pages 9 figures

Fast nastic motion of plants and bio-inspired structures

Authors: Qiaohang Guo, Eric Dai, Xiaomin Han, Stephen Xie, Eric Chao, Zi Chen

Abstract: The capability to sense and respond to external mechanical stimuli at various timescales is essential to many physiological aspects in plants, including self-protection, intake of nutrients, and reproduction. Remarkably, some plants have evolved the ability to react to mechanical stimuli within a few seconds despite a lack of muscles and nerves. The fast movements of plants in response to mechanic… ▽ More The capability to sense and respond to external mechanical stimuli at various timescales is essential to many physiological aspects in plants, including self-protection, intake of nutrients, and reproduction. Remarkably, some plants have evolved the ability to react to mechanical stimuli within a few seconds despite a lack of muscles and nerves. The fast movements of plants in response to mechanical stimuli have long captured the curiosity of scientists and engineers, but the mechanisms behind these rapid thigmonastic movements still are not understood completely. In this article, we provide an overview of such thigmonastic movements in several representative plants, including Dionaea, Utricularia, Aldrovanda, Drosera, and Mimosa. In addition, we review a series of studies that present biomimetic structures inspired by fast moving plants. We hope that this article will shed light on the current status of research on the fast movements of plants and bioinspired structures and also promote interdisciplinary studies on both the fundamental mechanisms of plants' fast movements and biomimetic structures for engineering applications, such as artificial muscles, multi-stable structures, and bioinspired robots. △ Less

Submitted 21 August, 2015; originally announced August 2015.