-
High power GaSb-based distributed feedback laser with laterally coupled dielectric gratings at 1.95μm
Authors:
Zhengqing Ding,
Juntian Cao,
Kun Zhan,
Yihang Chen,
Lidan Zhou,
Hao Tan,
Chenao Yang,
Ying Yu,
Zhichuan Niu,
Siyuan Yu
Abstract:
Traditional Distributed Feedback (DFB) or Distributed Bragg Reflector (DBR) lasers typically utilize buried gratings as frequency-selective optical feedback mechanisms. However, the fabrication of such gratings often necessitates regrowth processes, which can pose technical challenges for materials platforms such as GaAs and GaSb. Metal gratings were also used for GaSb lasers but they introduce ad…
▽ More
Traditional Distributed Feedback (DFB) or Distributed Bragg Reflector (DBR) lasers typically utilize buried gratings as frequency-selective optical feedback mechanisms. However, the fabrication of such gratings often necessitates regrowth processes, which can pose technical challenges for materials platforms such as GaAs and GaSb. Metal gratings were also used for GaSb lasers but they introduce additional absorption loss that limits device efficiency and output power. In this paper, we introduce a novel laterally coupled dielectric Bragg grating structure, which enables highly controllable, deterministic, and stable coupling between the grating and the optical mode. Our device demonstrates a continuous-wave output power of 47.02 mW at room temperature, exhibiting stable single-mode operation from 300-1000 mA and achieving a maximum side mode suppression ratio of 46.7 dB. These results underscore the innovative lateral coupled dielectric grating as a feasible and technologically superior approach for fabricating DFB and DBR lasers, which hold universal applicability across different material platforms and wavelength bands.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
Adaptive sampling strategy for tolerance analysis of freeform optical surfaces based on critical ray aiming
Authors:
Rundong Fan,
Shili Wei,
Zhuang Qian,
Huiru Ji,
Hao Tan,
Yan Mo,
Donglin Ma
Abstract:
The tolerance analysis of freeform surfaces plays a crucial role in the development of advanced imaging systems. However, the intricate relationship between surface error and imaging quality poses significant challenges, necessitating dense sampling of featured rays during the computation process to ensure an accurate tolerance for different fields of view (FOVs). Here, we propose an adaptive samp…
▽ More
The tolerance analysis of freeform surfaces plays a crucial role in the development of advanced imaging systems. However, the intricate relationship between surface error and imaging quality poses significant challenges, necessitating dense sampling of featured rays during the computation process to ensure an accurate tolerance for different fields of view (FOVs). Here, we propose an adaptive sampling strategy called "Critical Ray Aiming" for surface tolerance analysis. By identifying the most sensitive ray to wave aberration at each surface point, our methodology facilitates flexible sampling of the FOVs and entrance pupil (EP), achieving computational efficiency without compromising accuracy in determining tolerable surface error. We demonstrate the effectiveness of our method through tolerance analysis of two different freeform imaging systems.
△ Less
Submitted 4 July, 2024;
originally announced July 2024.
-
Data-driven Discovery for Robust Optimization of Semiconductor Nanowire Lasers
Authors:
Stephen A Church,
Francesco Vitale,
Aswani Gopakumar,
Nikita Gagrani,
Yunyan Zhang,
Nian Jiang,
Hark Hoe Tan,
Chennupati Jagadish,
Huiyun Liu,
Hannah Joyce,
Carsten Ronning,
Patrick Parkinson
Abstract:
Active wavelength-scale optoelectronic components are widely used in photonic integrated circuitry, however coherent sources of light -- namely optical lasers -- remain the most challenging component to integrate. Semiconductor nanowire lasers represent a flexible class of light source where each nanowire is both gain material and cavity; however, strong coupling between these properties and the p…
▽ More
Active wavelength-scale optoelectronic components are widely used in photonic integrated circuitry, however coherent sources of light -- namely optical lasers -- remain the most challenging component to integrate. Semiconductor nanowire lasers represent a flexible class of light source where each nanowire is both gain material and cavity; however, strong coupling between these properties and the performance leads to inhomogeneity across the population. While this has been studied and optimized for individual material systems, no architecture-wide insight is available. Here, nine nanowire laser material systems are studied and compared using 55,516 nanowire lasers to provide statistically robust insight into performance. These results demonstrate that, while it may be important to optimise internal quantum efficiency for certain materials, cavity effects are always critical. Our study provides a roadmap to optimize the performance of nanowire lasers made from any material: this can be achieved by ensuring a narrow spread of lengths and end-facet reflectivities.
△ Less
Submitted 21 May, 2024;
originally announced May 2024.
-
Deep Evidential Learning for Dose Prediction
Authors:
Hai Siong Tan,
Kuancheng Wang,
Rafe Mcbeth
Abstract:
In this work, we present a novel application of an uncertainty-quantification framework called Deep Evidential Learning in the domain of radiotherapy dose prediction. Using medical images of the Open Knowledge-Based Planning Challenge dataset, we found that this model can be effectively harnessed to yield uncertainty estimates that inherited correlations with prediction errors upon completion of n…
▽ More
In this work, we present a novel application of an uncertainty-quantification framework called Deep Evidential Learning in the domain of radiotherapy dose prediction. Using medical images of the Open Knowledge-Based Planning Challenge dataset, we found that this model can be effectively harnessed to yield uncertainty estimates that inherited correlations with prediction errors upon completion of network training. This was achieved only after reformulating the original loss function for a stable implementation. We found that (i)epistemic uncertainty was highly correlated with prediction errors, with various association indices comparable or stronger than those for Monte-Carlo Dropout and Deep Ensemble methods, (ii)the median error varied with uncertainty threshold much more linearly for epistemic uncertainty in Deep Evidential Learning relative to these other two conventional frameworks, indicative of a more uniformly calibrated sensitivity to model errors, (iii)relative to epistemic uncertainty, aleatoric uncertainty demonstrated a more significant shift in its distribution in response to Gaussian noise added to CT intensity, compatible with its interpretation as reflecting data noise. Collectively, our results suggest that Deep Evidential Learning is a promising approach that can endow deep-learning models in radiotherapy dose prediction with statistical robustness. Towards enhancing its clinical relevance, we demonstrate how we can use such a model to construct the predicted Dose-Volume-Histograms' confidence intervals.
△ Less
Submitted 25 April, 2024;
originally announced April 2024.
-
Marangoni Interfacial Instability Induced by Solute Transfer Across Liquid-Liquid Interfaces
Authors:
Xiangwei Li,
Dongdong Wan,
Mengqi Zhang,
Huanshu Tan
Abstract:
This study presents analytical and numerical investigations of Marangoni interfacial instability in a two-liquid-layer system with constant solute transfer across the liquid interface. Previous research has demonstrated that both viscosity ratio and diffusivity ratio can influence the system's hydrodynamic stability via the Marangoni effect, but the distinctions in process and mechanisms are not y…
▽ More
This study presents analytical and numerical investigations of Marangoni interfacial instability in a two-liquid-layer system with constant solute transfer across the liquid interface. Previous research has demonstrated that both viscosity ratio and diffusivity ratio can influence the system's hydrodynamic stability via the Marangoni effect, but the distinctions in process and mechanisms are not yet fully understood. To gain insights, we developed a numerical model based on the phase-field method, rigorously validated against linear stability analysis. The parameter space explored encompasses Schmidt number ($Sc \in [0.2, 200]$), Marangoni number ($Ma_c \in [10, 2000]$), Capillary number ($Ca \in [0.01, 1]$), viscosity ratio ($ζ_μ\in [0.1, 10]$), and diffusivity ratio ($ζ_D \in [0.1, 10]$). We identified two key characteristics of Marangoni instability: the self-amplification of triggered Marangoni flows in flow-intensity-unstable case and the oscillation of flow patterns during flow decay in flow-intensity-stable case. Direct numerical simulations incorporating interfacial deformation and nonlinearity confirm that specific conditions, including solute transfer out of a higher viscous or less diffusive layer, amplify and sustain Marangoni interfacial flows. Furthermore, the study highlights the role of interfacial deformation and unequal solute variation in system instability, proposing corresponding instability mechanisms. Notably, traveling waves are observed in the flow-intensity-stable case, correlating with the morphological evolution of convection rolls. These insights contribute to a comprehensive understanding of Marangoni interfacial instability in multicomponent fluids systems, elucidating the mechanisms underlying variations in viscosity and diffusivity ratios across liquid layers.
△ Less
Submitted 23 April, 2024; v1 submitted 21 April, 2024;
originally announced April 2024.
-
Laser excitation of the $^{229}$Th nuclear isomeric transition in a solid-state host
Authors:
R. Elwell,
Christian Schneider,
Justin Jeet,
J. E. S. Terhune,
H. W. T. Morgan,
A. N. Alexandrova,
H. B. Tran Tan,
Andrei Derevianko,
Eric R. Hudson
Abstract:
LiSrAlF$_6$ crystals doped with $^{229}$Th are used in a laser-based search for the nuclear isomeric transition. Two spectroscopic features near the nuclear transition energy are observed. The first is a broad excitation feature that produces red-shifted fluorescence that decays with a timescale of a few seconds. The second is a narrow, laser-linewidth-limited spectral feature at…
▽ More
LiSrAlF$_6$ crystals doped with $^{229}$Th are used in a laser-based search for the nuclear isomeric transition. Two spectroscopic features near the nuclear transition energy are observed. The first is a broad excitation feature that produces red-shifted fluorescence that decays with a timescale of a few seconds. The second is a narrow, laser-linewidth-limited spectral feature at $148.38219(4)_{\textrm{stat}}(20)_{\textrm{sys}}$ nm ($2020407.3(5)_{\textrm{stat}}(30)_{\textrm{sys}}$ GHz) that decays with a lifetime of $568(13)_{\textrm{stat}}(20)_{\textrm{sys}}$ s. This feature is assigned to the excitation of the $^{229}$Th nuclear isomeric state, whose energy is found to be $8.355733(2)_{\textrm{stat}}(10)_{\textrm{sys}}$ eV in $^{229}$Th:\thor:LiSrAlF$_6$.
△ Less
Submitted 18 April, 2024;
originally announced April 2024.
-
Room-Temperature Polariton Lasing from CdSe core-only Nanoplatelets
Authors:
Francisco Freire-Fernández,
Nathan G. Sinai,
Max J. H. Tan,
Sang-Min Park,
Eric Koessler,
Todd D. Krauss,
Pengfei Huo,
Teri W. Odom
Abstract:
This paper reports how CdSe core-only nanoplatelets coupled with plasmonic Al nanoparticle lattices can exhibit exciton-polariton lasing. By improving a procedure to synthesize monodisperse 4-monolayer CdSe nanoplatelets, we could resolve polariton decay dynamics and pathways. Experiment and theory confirmed that the system is in the strong coupling regime based on anti-crossings in the dispersion…
▽ More
This paper reports how CdSe core-only nanoplatelets coupled with plasmonic Al nanoparticle lattices can exhibit exciton-polariton lasing. By improving a procedure to synthesize monodisperse 4-monolayer CdSe nanoplatelets, we could resolve polariton decay dynamics and pathways. Experiment and theory confirmed that the system is in the strong coupling regime based on anti-crossings in the dispersion diagrams and magnitude of the Rabi splitting values. Notably, polariton lasing is observed only for cavity lattice periodicities that exhibit specific dispersive characteristics that enable polariton accumulation. The threshold of polariton lasing is 25-fold lower than reported photon lasing values from CdSe nanoplatelets in similar cavity designs. This open-cavity platform offers a simple approach to control exciton polaritons anticipated to benefit quantum information processing, optoelectronics, and chemical reactions.
△ Less
Submitted 12 April, 2024;
originally announced April 2024.
-
Surface variation analysis of freeform optical systems over surface frequency bands for prescribed wavefront errors
Authors:
Rundong Fan,
Shili Wei,
Huiru JI,
Zhuang Qian,
Hao Tan,
Yan Mo,
Donglin MA
Abstract:
The surface errors of freeform surfaces reflect the manufacturing complexities and significantly impact the feasibility of processing designed optical systems. With multiple degrees of freedom, freeform surfaces pose challenges in surface tolerance analysis in the field. Nevertheless, current research has neglected the influence of surface slopes on the directions of ray propagation. A sudden alte…
▽ More
The surface errors of freeform surfaces reflect the manufacturing complexities and significantly impact the feasibility of processing designed optical systems. With multiple degrees of freedom, freeform surfaces pose challenges in surface tolerance analysis in the field. Nevertheless, current research has neglected the influence of surface slopes on the directions of ray propagation. A sudden alteration in the surface slope will lead to a corresponding abrupt shift in the wavefront, even when the change in surface sag is minimal. Moreover, within the realm of freeform surface manufacturing, variation in surface slope across different frequency bands may give rise to unique surface variation. Within the context of this study, we propose a tolerance analysis method to analyze surface variation in freeform surfaces considering surface frequency band slopes based on real ray data. This approach utilizes real ray data to rapidly evaluate surface variation within a specified frequency band of surface slopes. Crucially, our proposed method yields the capability to obtain system surface variation with significant wavefront aberration, in contrast to previous methodologies. The feasibility and advantages of this framework are assessed by analyzing a single-mirror system with a single field and an off-axis two-mirror system. We expect to integrate the proposed methodology with freeform surface design and manufacturing, thereby expanding the scope of freeform optics.
△ Less
Submitted 27 March, 2024;
originally announced March 2024.
-
Self-Lubricating Drops
Authors:
Huanshu Tan,
Detlef Lohse,
Xuehua Zhang
Abstract:
Over the past decade, there has been a growing interest in the study of multicomponent drops. These drops exhibit unique phenomena, as the interplay between hydrodynamics and the evolving physicochemical properties of the mixture gives rise to distinct and often unregulated behaviors. Of particular interest is the complex dynamic behavior of the drop contact line, which can display self-lubricatio…
▽ More
Over the past decade, there has been a growing interest in the study of multicomponent drops. These drops exhibit unique phenomena, as the interplay between hydrodynamics and the evolving physicochemical properties of the mixture gives rise to distinct and often unregulated behaviors. Of particular interest is the complex dynamic behavior of the drop contact line, which can display self-lubrication effect. The presence of a slipping contact line in self-lubricating multicomponent drops can suppress the coffee-stain effect, conferring valuable technological applications. This review will explain the current understanding of the self-lubrication effect of drops, and cover an analysis of fundamental concepts and recent advances in colloidal assembly. The potential applications of self-lubricating drops across different fields will also be highlighted.
△ Less
Submitted 2 March, 2024;
originally announced March 2024.
-
Expanded-plane bilayer thermal concentrator for improving thermoelectric conversion efficiency
Authors:
Haohan Tan,
Yuqian Zhao,
Xinchen Zhou,
Jiping Huang
Abstract:
Thermoelectric devices are pivotal in the energy sector, with enhancing their conversion efficiency being a longstanding focal point. While progress has been made, overcoming the inherent low efficiency and heat management issues remains challenging. The advent of thermal metamaterials, particularly thermal concentrators, holds promise for improved thermoelectric efficiency. The concentrator has t…
▽ More
Thermoelectric devices are pivotal in the energy sector, with enhancing their conversion efficiency being a longstanding focal point. While progress has been made, overcoming the inherent low efficiency and heat management issues remains challenging. The advent of thermal metamaterials, particularly thermal concentrators, holds promise for improved thermoelectric efficiency. The concentrator has the potential to amplify the temperature gradient within the working region without altering the temperature gradient of the background, thereby enhancing thermoelectric conversion efficiency through this concentrating effect. Nevertheless, the efficacy of this effect is contingent upon the structural parameters of the concentrator. Systematically investigating the impact of metamaterials on thermoelectric conversion efficiency, particularly in terms of quantifying the enhancement, presents a significant challenge. Additionally, the intrinsic thermal conductivity of the material imposes constraints on the applicability of the concentrator in this regard. In this context, drawing inspiration from the recently proposed passive ultra-conductive heat transport scheme, we have devised expanded-plane bilayer thermal concentrators. We substantiate the prospective performance of our design through analytical demonstration, further validated through finite-element simulations and experiments. Notably, through direct calculation, we illustrate an efficiency improvement of about 38\% when utilizing the expanded-plane concentrator comparing with not using expanded-plane structure. The expanded-plane geometrical configuration of the outer layer can also attain large-scale value. These findings not only present a novel avenue for the functional transformation of thermal metamaterials but also hold significant implications for the field of thermoelectrics.
△ Less
Submitted 20 January, 2024; v1 submitted 14 January, 2024;
originally announced January 2024.
-
Thermal conduction force under standing and quasi-standing temperature field
Authors:
Haohan Tan,
Yuqian Zhao,
Jiping Huang
Abstract:
Thermal conduction force plays a crucial role in manipulating the local thermal conductivity of crystals. However, due to the diffusive nature of thermal conduction, investigating the force effect is challenging. Recently, researchers have explored the force effect based on the wave-like behavior of thermal conduction, specifically second sound. However, their focus has been primarily on the progr…
▽ More
Thermal conduction force plays a crucial role in manipulating the local thermal conductivity of crystals. However, due to the diffusive nature of thermal conduction, investigating the force effect is challenging. Recently, researchers have explored the force effect based on the wave-like behavior of thermal conduction, specifically second sound. However, their focus has been primarily on the progressive case, neglecting the more complex standing temperature field case. Additionally, establishing a connection between the results obtained from the progressive case and the standing case poses a challenging problem. In this study, we investigate the force effect of standing and quasi-standing temperature fields, revealing distinct characteristics of thermal conduction force. Moreover, we establish a link between the progressive and standing cases through the quasi-standing case. Our findings pave the way for research in more intricate scenarios and provide an additional degree of freedom for manipulating the local thermal conductivity of dielectric crystals.
△ Less
Submitted 6 January, 2024;
originally announced January 2024.
-
A dynamic thermal sensing mechanism with reconfigurable expanded-plane structures
Authors:
Haohan Tan,
Haoyang Cai,
Peng Jin,
Jiping Huang
Abstract:
The precise measurement of temperature is crucial in various fields such as biology, medicine, industrial automation, energy management, and daily life applications. While in most scenarios, sensors with a fixed thermal conductivity inevitably mismatch the analogous parameter of the medium being measured, thus causing the distortion and inaccurate detection of original temperature fields. Despite…
▽ More
The precise measurement of temperature is crucial in various fields such as biology, medicine, industrial automation, energy management, and daily life applications. While in most scenarios, sensors with a fixed thermal conductivity inevitably mismatch the analogous parameter of the medium being measured, thus causing the distortion and inaccurate detection of original temperature fields. Despite recent efforts on addressing the parameter-mismatch issue, all current solutions are constrained to a fixed working medium whereas a more universal sensor should function in a variety of scenes. Here, we report a dynamic thermal sensor capable of highly accurate measurements in diverse working environments. Remarkably, thanks to the highly tunable thermal conductivity of the expanded-plane structure, this sensor works effect on background mediums with a wide range of conductivity. Such a development greatly enhances the robustness and adaptability of thermal sensors, setting a solid foundation for applications in multi-physical sensing scenarios.
△ Less
Submitted 6 January, 2024;
originally announced January 2024.
-
Demonstration of a low loss, highly stable and re-useable edge coupler for high heralding efficiency and low g^(2) (0) SOI correlated photon pair sources
Authors:
Jinyi Du,
George F. R. Chen,
Hongwei Gao,
James A. Grieve,
Dawn T. H. Tan,
Alexander Ling
Abstract:
We report a stable, low loss method for coupling light from silicon-on-insulator (SOI) photonic chips into optical fibers. The technique is realized using an on-chip tapered waveguide and a cleaved small core optical fiber. The on-chip taper is monolithic and does not require a patterned cladding, thus simplifying the chip fabrication process. The optical fiber segment is composed of a centimeter-…
▽ More
We report a stable, low loss method for coupling light from silicon-on-insulator (SOI) photonic chips into optical fibers. The technique is realized using an on-chip tapered waveguide and a cleaved small core optical fiber. The on-chip taper is monolithic and does not require a patterned cladding, thus simplifying the chip fabrication process. The optical fiber segment is composed of a centimeter-long small core fiber (UHNA7) which is spliced to SMF-28 fiber with less than -0.1 dB loss. We observe an overall coupling loss of -0.64 dB with this design. The chip edge and fiber tip can be butt coupled without damaging the on-chip taper or fiber. Friction between the surfaces maintains alignment leading to an observation of +-0.1 dB coupling fluctuation during a ten-day continuous measurement without use of any adhesive. This technique minimizes the potential for generating Raman noise in the fiber, and has good stability compared to coupling strategies based on longer UHNA fibers or fragile lensed fibers. We also applied the edge coupler on a correlated photon pair source and observed a raw coincidence count rate of 1.21 million cps and raw heralding efficiency of 21.3%. We achieved an auto correlation function g^(2) (0) as low as 0.0004 at the low pump power regime.
△ Less
Submitted 14 March, 2024; v1 submitted 28 December, 2023;
originally announced December 2023.
-
Exploring UMAP in hybrid models of entropy-based and representativeness sampling for active learning in biomedical segmentation
Authors:
H. S. Tan,
Kuancheng Wang,
Rafe Mcbeth
Abstract:
In this work, we study various hybrid models of entropy-based and representativeness sampling techniques in the context of active learning in medical segmentation, in particular examining the role of UMAP (Uniform Manifold Approximation and Projection) as a technique for capturing representativeness. Although UMAP has been shown viable as a general purpose dimension reduction method in diverse are…
▽ More
In this work, we study various hybrid models of entropy-based and representativeness sampling techniques in the context of active learning in medical segmentation, in particular examining the role of UMAP (Uniform Manifold Approximation and Projection) as a technique for capturing representativeness. Although UMAP has been shown viable as a general purpose dimension reduction method in diverse areas, its role in deep learning-based medical segmentation has yet been extensively explored. Using the cardiac and prostate datasets in the Medical Segmentation Decathlon for validation, we found that a novel hybrid combination of Entropy-UMAP sampling technique achieved a statistically significant Dice score advantage over the random baseline ($3.2 \%$ for cardiac, $4.5 \%$ for prostate), and attained the highest Dice coefficient among the spectrum of 10 distinct active learning methodologies we examined. This provides preliminary evidence that there is an interesting synergy between entropy-based and UMAP methods when the former precedes the latter in a hybrid model of active learning.
△ Less
Submitted 27 May, 2024; v1 submitted 16 December, 2023;
originally announced December 2023.
-
Nanowire Array Breath Acetone Sensor for Diabetes Monitoring
Authors:
Shiyu Wei,
Zhe Li,
Krishnan Murugappan,
Ziyuan Li,
Mykhaylo Lysevych,
Kaushal Vora,
Hark Hoe Tan,
Chennupati Jagadish,
Buddini I Karawdeniya,
Christopher J Nolan,
Antonio Tricoli,
Lan Fu
Abstract:
Diabetic ketoacidosis (DKA) is a life-threatening acute complication of diabetes in which ketone bodies accumulate in the blood. Breath acetone (a ketone) directly correlates with blood ketones, such that breath acetone monitoring could be used to improve safety in diabetes care. In this work, we report the design and fabrication of a chitosan/Pt/InP nanowire array based chemiresistive acetone sen…
▽ More
Diabetic ketoacidosis (DKA) is a life-threatening acute complication of diabetes in which ketone bodies accumulate in the blood. Breath acetone (a ketone) directly correlates with blood ketones, such that breath acetone monitoring could be used to improve safety in diabetes care. In this work, we report the design and fabrication of a chitosan/Pt/InP nanowire array based chemiresistive acetone sensor. By implementing chitosan as a surface functionalization layer and a Pt Schottky contact for efficient charge transfer processes and photovoltaic effect, self-powered, highly selective acetone sensing has been achieved. This sensor has an ultra-wide detection range from sub-ppb to >100,000 ppm levels at room temperature, incorporating the range from healthy individuals (300-800 ppb) to those at high-risk of DKA (> 75 ppm). The nanowire sensor has been further integrated into a handheld breath testing prototype, the Ketowhistle, which can successfully detect different ranges of acetone concentrations in simulated breath. The Ketowhistle demonstrates immediate potential for non-invasive ketone testing and monitoring for persons living with diabetes, in particular for DKA prevention.
△ Less
Submitted 1 December, 2023;
originally announced December 2023.
-
Cavity magnomechanics: from classical to quantum
Authors:
Xuan Zuo,
Zhi-Yuan Fan,
Hang Qian,
Ming-Song Ding,
Huatang Tan,
Hao Xiong,
Jie Li
Abstract:
Hybrid quantum systems based on magnons in magnetic materials have made significant progress in the past decade. They are built based on the couplings of magnons with microwave photons, optical photons, vibration phonons, and superconducting qubits. In particular, the interactions among magnons, microwave cavity photons, and vibration phonons form the system of cavity magnomechanics (CMM), which l…
▽ More
Hybrid quantum systems based on magnons in magnetic materials have made significant progress in the past decade. They are built based on the couplings of magnons with microwave photons, optical photons, vibration phonons, and superconducting qubits. In particular, the interactions among magnons, microwave cavity photons, and vibration phonons form the system of cavity magnomechanics (CMM), which lies in the interdisciplinary field of cavity QED, magnonics, quantum optics, and quantum information. Here, we review the experimental and theoretical progress of this emerging field. We first introduce the underlying theories of the magnomechanical coupling, and then some representative classical phenomena that have been experimentally observed, including magnomechanically induced transparency, magnomechanical dynamical backaction, magnon-phonon cross-Kerr nonlinearity, etc. We also discuss a number of theoretical proposals, which show the potential of the CMM system for preparing different kinds of quantum states of magnons, phonons, and photons, and hybrid systems combining magnomechanics and optomechanics and relevant quantum protocols based on them. Finally, we summarize this review and provide an outlook for the future research directions in this field.
△ Less
Submitted 16 March, 2024; v1 submitted 29 October, 2023;
originally announced October 2023.
-
An efficient modeling workflow for high-performance nanowire single-photon avalanche detector
Authors:
Zhe Li,
H. Hoe Tan,
Chennupati Jagadish,
Lan Fu
Abstract:
Single-photon detector (SPD), an essential building block of the quantum communication system, plays a fundamental role in developing next-generation quantum technologies. In this work, we propose an efficient modeling workflow of nanowire SPDs utilizing avalanche breakdown at reverse-biased conditions. The proposed workflow is explored to maximize computational efficiency and balance time-consumi…
▽ More
Single-photon detector (SPD), an essential building block of the quantum communication system, plays a fundamental role in developing next-generation quantum technologies. In this work, we propose an efficient modeling workflow of nanowire SPDs utilizing avalanche breakdown at reverse-biased conditions. The proposed workflow is explored to maximize computational efficiency and balance time-consuming drift-diffusion simulation with fast script-based post-processing. Without excessive computational effort, we could predict a suite of key device performance metrics, including breakdown voltage, dark/light avalanche built-up time, photon detection efficiency, dark count rate, and the deterministic part of timing jitter due to device structures. Implementing the proposed workflow onto a single InP nanowire and comparing it to the extensively studied planar devices and superconducting nanowire SPDs, we showed the great potential of nanowire avalanche SPD to outperform their planar counterparts and obtain as superior performance as superconducting nanowires, i.e., achieve a high photon detection efficiency of 70% with a dark count rate less than 20 Hz at non-cryogenic temperature. The proposed workflow is not limited to single-nanowire or nanowire-based device modeling and can be readily extended to more complicated two-/three dimensional structures.
△ Less
Submitted 29 October, 2023;
originally announced October 2023.
-
Combined Experimental and Theoretical Studies on Iodine Capture of Zr-based Metal-Organic Frameworks: Effect of N-functionalization and Adsorption Mechanism
Authors:
Jie Liang,
Haoyi Tan,
Jiaomei Liu,
Huizhao Qi,
Xin Li,
Liu Wu,
Xiangfei Xue,
Guangcun Shan
Abstract:
The potential leakage of nuclear waste, especially radioiodine, is a major safety concerning issue around the world. To remove radioiodine from nuclear waste efficiently, there is an urgent demand for adsorbents that possess both high stability and strong adsorption affinity for environmental remediation. Herein, two Zr-based metal-organic frameworks (Zr-MOFs) and their N-functionalized analogues…
▽ More
The potential leakage of nuclear waste, especially radioiodine, is a major safety concerning issue around the world. To remove radioiodine from nuclear waste efficiently, there is an urgent demand for adsorbents that possess both high stability and strong adsorption affinity for environmental remediation. Herein, two Zr-based metal-organic frameworks (Zr-MOFs) and their N-functionalized analogues have been synthesized and researched for iodine adsorption in both vapours and solutions. It was found that Zr-MOFs with N-enriched ligands (e.g., pyridine and amino) exhibited the faster iodine adsorption rate and the higher iodine uptake amount (e.g., reaching adsorption equilibrium within 4 hours with the removal rate of above 85% for iodine solution adsorption) than their unfunctionalized counterparts (UiO-66 and UiO-67). The critical role played by N-enriched groups in enhancing iodine adsorption has been revealed through versatile model fittings, X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy characterizations, as well as density functional theory (DFT) calculations. Compared to those in amino-group, the N-atoms in pyridine-groups showed a deeper affinity towards iodine molecules. Remarkably, the N-enriched UiOs adsorbents also exhibited good recyclability, especially UiO-66-PYDC and UiO-67-NH2 could maintain the removal efficiency of 89.05% and 85.49% after four adsorption-desorption recycling tests. With the strong iodine uptake affinity and outstanding regeneration performance, this work has systematically investigated the impact of N-functionalization on the enhanced performance for iodine capture by using the N-enriched UiO MOFs as promising adsorbents, providing an insightful guideline into the physical chemistry of adsorption mechanism behind the radioiodine capture.
△ Less
Submitted 5 October, 2023;
originally announced October 2023.
-
An Interfacial Profile-Preserving Approach for Phase Field Modeling of Incompressible Two-Phase Flows
Authors:
Haohao Hao,
Xiangwei Li,
Chenglin Jiang,
Huanshu Tan
Abstract:
In this paper, we introduce an interfacial profile-preserving approach for phase field modeling for simulating incompressible two-phase flows. While the advective Cahn-Hilliard equation effectively captures the topological evolution of complex interfacial structures, it tends to displace the fluid interface from its equilibrium state, impacting simulation accuracy. To tackle this challenge, we pre…
▽ More
In this paper, we introduce an interfacial profile-preserving approach for phase field modeling for simulating incompressible two-phase flows. While the advective Cahn-Hilliard equation effectively captures the topological evolution of complex interfacial structures, it tends to displace the fluid interface from its equilibrium state, impacting simulation accuracy. To tackle this challenge, we present an interfacial profile-preserving formulation that relies on a phase-field-related signed distance function, rather than the phase field function itself. It is solved iteratively to restore the equilibrium interface profile after each time step. This approach effectively minimizes discretization errors and enhances mass conservation accuracy for each phase. Our formulation is discretized using a second-order Total Variation Diminishing (TVD) Runge-Kutta method within iterations and a finite volume scheme in spatial discretization. We quantitatively compare our present profile-preserving method with the original method in terms of accuracy and convergence rate through simulations of a deforming drop in a single vortex and a rising bubble in quiescent fluid, and further validate the applicability through simulations of a two-dimensional contracting liquid filament, a drop impacting a deep liquid pool, and three-dimensional drop deformation in shear flow. Our results exhibit good agreement with analytical solutions, prior numerical results, and experimental data, demonstrating the effectiveness and accuracy of our proposed approach.
△ Less
Submitted 30 September, 2023;
originally announced October 2023.
-
Radiative metamaterials based on effective-medium theory
Authors:
Haohan Tan,
Liujun Xu
Abstract:
Thermal metamaterials have made significant advancements in the past few decades. However, the concept of thermal metamaterials is primarily rooted in the thermal conduction mechanism, which has consequently restricted their application scope. It is imperative to consider thermal radiation, another crucial thermal transport mechanism, particularly in high-temperature regimes, when designing therma…
▽ More
Thermal metamaterials have made significant advancements in the past few decades. However, the concept of thermal metamaterials is primarily rooted in the thermal conduction mechanism, which has consequently restricted their application scope. It is imperative to consider thermal radiation, another crucial thermal transport mechanism, particularly in high-temperature regimes, when designing thermal devices. In this review paper, we present the advancements in this area, with a specific focus on research conducted using the effective-medium theory. Additionally, we explore the potential applications of radiative thermal metamaterials and discuss prospective research directions from a microscopic perspective for future investigations.
△ Less
Submitted 22 September, 2023;
originally announced September 2023.
-
Radiative thermal switch via metamaterials made of vanadium dioxide-coated nanoparticles
Authors:
Ming-Jian He,
Xue Guo,
Hong Qi,
Lu Lu,
He-Ping Tan
Abstract:
In this work, a thermal switch is proposed based on the phase-change material vanadium dioxide (VO2) within the framework of near-field radiative heat transfer (NFRHT). The radiative thermal switch consists of two metamaterials filled with core-shell nanoparticles, with the shell made of VO2. Compared to traditional VO2 slabs, the proposed switch exhibits a more than 2-times increase in the switch…
▽ More
In this work, a thermal switch is proposed based on the phase-change material vanadium dioxide (VO2) within the framework of near-field radiative heat transfer (NFRHT). The radiative thermal switch consists of two metamaterials filled with core-shell nanoparticles, with the shell made of VO2. Compared to traditional VO2 slabs, the proposed switch exhibits a more than 2-times increase in the switching ratio, reaching as high as 90.29% with a 100 nm vacuum gap. The improved switching effect is attributed to the capability of the VO2 shell to couple with the core, greatly enhancing heat transfer with the insulating VO2, while blocking the motivation of the core in the metallic state of VO2. As a result, this efficiently enlarges the difference in photonic characteristics between the insulating and metallic states of the structure, thereby improving the ability to rectify the NFRHT. The proposed switch opens pathways for active control of NFRHT and holds practical significance for developing thermal photon-based logic circuits.
△ Less
Submitted 19 September, 2023;
originally announced September 2023.
-
Nuclear-spin-dependent corrections to the transition polarizability in cesium
Authors:
D. Xiao,
H. B. Tran Tan,
A. Derevianko
Abstract:
The Stark-interference technique is commonly used to amplify the feeble parity-violating signal in atomic experiments. As a result, interpretation of these experiments in terms of electroweak observables requires knowledge of the Stark-induced $E1$ transition amplitudes or, equivalently, transition polarizabilities. While the literature assumes that these transition polarizabilities do not depend…
▽ More
The Stark-interference technique is commonly used to amplify the feeble parity-violating signal in atomic experiments. As a result, interpretation of these experiments in terms of electroweak observables requires knowledge of the Stark-induced $E1$ transition amplitudes or, equivalently, transition polarizabilities. While the literature assumes that these transition polarizabilities do not depend on the nuclear spin, here we prove the contrary. The nuclear spin dependence arises due to hyperfine mixing of atomic states and requires a third-order perturbation theory (one hyperfine interaction and two electric-dipole interactions) treatment. We demonstrate that the so far neglected {\em tensor} contribution appears in the transition polarizability and present numerical results for the nuclear-spin-dependent corrections to the $6S_{1/2}\rightarrow{7S_{1/2}}$ transition polarizability in $^{133}$Cs. We investigate the effect of these corrections to transition polarizabilities on the extraction of the $^{133}$Cs anapole moment from the Boulder experiment [Science 275, 1759 (1997)]. We also consider their effect on the extraction of the ratio between the scalar and vector transition polarizabilities from the measurements [Phys. Rev. A 55, 2 (1997)]. While the corrections are minor at the current level of experimental accuracy, our analysis provides a framework for future experiments.
△ Less
Submitted 9 July, 2023;
originally announced July 2023.
-
Splitting of temperature distributions due to dual-channel photon heat exchange in many-body systems
Authors:
Ming-Jian He,
Xue Guo,
Hong Qi,
Ivan Latella,
He-Ping Tan
Abstract:
We investigate the radiative heat transfer and spatial distributions of stationary temperatures in periodic many-body systems composed of alternating slabs of two different materials. We show that temperature distributions exhibit an alternating spatial pattern and split into two distinct components, with each component corresponding to one of the two materials. Spatial temperature variations foll…
▽ More
We investigate the radiative heat transfer and spatial distributions of stationary temperatures in periodic many-body systems composed of alternating slabs of two different materials. We show that temperature distributions exhibit an alternating spatial pattern and split into two distinct components, with each component corresponding to one of the two materials. Spatial temperature variations following the periodicity of the structure can be attributed to a dual-channel photon heat exchange through a long-range coupling of electromagnetic modes supported by bodies of the same material. We also analyze the thermal relaxation of the temperatures in the system to verify potential applications in dynamical situations. The results reveal that tunable nonmonotonic temperature variations can be also designed and utilized at a transient mode. The dual-channel mechanism to control temperature distributions proposed in the present work may pave new avenues for prospective applications in nano devices, especially for thermal photon-driven logic circuitry and thermal management.
△ Less
Submitted 24 June, 2023;
originally announced June 2023.
-
Multiple magnetoplasmon polaritons of magneto-optical graphene in near-field radiative heat transfer
Authors:
Ming-Jian He,
Lei Qu,
Ya-Tao Ren,
Hong Qi,
Mauro Antezza,
He-Ping Tan
Abstract:
Graphene, as a two-dimensional magneto-optical material, supports magnetoplasmon polaritons (MPP) when exposed to an applied magnetic field. Recently, MPP of a single-layer graphene has shown an excellent capability in the modulation of near-field radiative heat transfer (NFRHT). In this study, we present a comprehensive theoretical analysis of NFRHT between two multilayered graphene structures, w…
▽ More
Graphene, as a two-dimensional magneto-optical material, supports magnetoplasmon polaritons (MPP) when exposed to an applied magnetic field. Recently, MPP of a single-layer graphene has shown an excellent capability in the modulation of near-field radiative heat transfer (NFRHT). In this study, we present a comprehensive theoretical analysis of NFRHT between two multilayered graphene structures, with a particular focus on the multiple MPP effect. We reveal the physical mechanism and evolution law of the multiple MPP, and we demonstrate that the multiple MPP allow one to mediate, enhance, and tune the NFRHT by appropriately engineering the properties of graphene, the number of graphene sheets, the intensity of magnetic fields, as well as the geometric structure of systems. We show that the multiple MPP have a quite significant distinction relative to the single MPP or multiple surface plasmon polaritons (SPPs) in terms of modulating and manipulating NFRHT.
△ Less
Submitted 24 June, 2023;
originally announced June 2023.
-
Performance improvement of three-body radiative diode driven by graphene surface plasmon polaritons
Authors:
Ming-Jian He,
Xue Guo,
Hong Qi,
Zhi-Heng Zheng,
Mauro Antezza,
He-Ping Tan
Abstract:
As an analogue to electrical diode, a radiative thermal diode allows radiation to transfer more efficiently in one direction than in the opposite direction by operating in a contactless mode. In this study, we demonstrated that, within the framework of three-body photon thermal tunneling, the rectification performance of three-body radiative diode can be greatly improved by bringing graphene into…
▽ More
As an analogue to electrical diode, a radiative thermal diode allows radiation to transfer more efficiently in one direction than in the opposite direction by operating in a contactless mode. In this study, we demonstrated that, within the framework of three-body photon thermal tunneling, the rectification performance of three-body radiative diode can be greatly improved by bringing graphene into the system. The system is composed of three parallel slabs, with the hot and cold terminals of the diode coated with graphene films, and the intermediate body made of vanadium dioxide (VO2). The rectification factor of the proposed radiative thermal diode reaches 300 % with a 350 nm separation distance between the hot and cold terminals of the diode. With the help of graphene, the rectification performance of the radiative thermal diode can be improved by over 11 times. By analyzing the spectral heat flux and energy transmission coefficients, it was found that the improved performance is primarily attributed to the surface plasmon polaritons (SPPs) of graphene. They excite the modes of insulating VO2 in the forward-biased scenario by forming strongly coupled modes between graphene and VO2, and thus dramatically enhance the heat flux. While, for the reverse-biased scenario, the VO2 is at its metallic state and thus graphene SPPs cannot work by three-body photon thermal tunneling. Furthermore, the improvement was also investigated for different chemical potentials of graphene, and geometric parameters of the three-body system. Our findings demonstrate the feasibility of using thermal-photon-based logical circuits, creating radiation-based communication technology, and implementing thermal management approaches at the nanoscale.
△ Less
Submitted 23 June, 2023;
originally announced June 2023.
-
Reevaluation of Stark-induced transition polarizabilities in cesium
Authors:
H. B. Tran Tan,
D. Xiao,
A. Derevianko
Abstract:
Extracting electroweak observables from experiments on atomic parity violation (APV) using the Stark interference technique requires accurate knowledge of transition polarizabilities. In cesium, the focus of our paper, the $6S_{1/2}\rightarrow{7S_{1/2}}$ APV amplitude is deduced from the measured ratio of the APV amplitude to the vector transition polarizability, $β$. This ratio was measured with…
▽ More
Extracting electroweak observables from experiments on atomic parity violation (APV) using the Stark interference technique requires accurate knowledge of transition polarizabilities. In cesium, the focus of our paper, the $6S_{1/2}\rightarrow{7S_{1/2}}$ APV amplitude is deduced from the measured ratio of the APV amplitude to the vector transition polarizability, $β$. This ratio was measured with a $0.35\%$ uncertainty by the Boulder group [Science 275, 1759 (1997)]. Currently, there is a sizable discrepancy in different determinations of $β$ critically limiting the interpretation of the APV measurement. The most recent value [Phys. Rev. Lett. 123, 073002 (2019)] of $β=27.139(42)\, \mathrm{a.u.}$ was deduced from a semi-empirical sum-over-state determination of the scalar transition polarizability $α$ and the measured $α/β$ ratio [Phys. Rev. A 55, 1007 (1997)]. This value of $β$, however, differs by $\sim 0.7\%$ or $2.8σ$ from the previous determination of $β=26.957(51)$ by [Phys. Rev. A 62, 052101 (2000)] based on the measured ratio $M1/β$ of the magnetic-dipole $6S_{1/2}\rightarrow{7S_{1/2}}$ matrix element to $β$. Here, we revise the determination of $β$ by [Phys. Rev. Lett. 123, 073002 (2019)], using a more consistent and more theoretically complete treatment of contributions from the excited intermediate states in the sum-over-state $α/β$ method. Our result of $β=26.887(38)\, \mathrm{a.u.}$ resolves the tension between the $α/β$ and $M1/β$ approaches. We recommend the value of $β=26.912(30)$ obtained by averaging our result and that of [Phys. Rev. A 62, 052101 (2000)].
△ Less
Submitted 14 August, 2023; v1 submitted 15 June, 2023;
originally announced June 2023.
-
Embedded, micro-interdigitated flow fields in high areal-loading intercalation electrodes towards seawater desalination and beyond
Authors:
Vu Q. Do,
Erik R. Reale,
Irwin C. Loud IV,
Paul G. Rozzi,
Haosen Tan,
David A. Willis,
Kyle C. Smith
Abstract:
Faradaic deionization (FDI) is a promising technology for energy-efficient water desalination using porous electrodes containing redox-active materials. Herein, we demonstrate for the first time the capability of a symmetric FDI flow cell to produce freshwater (<17.1 mM NaCl) from concentrated brackish water (118mM), to produce effluent near freshwater salinity (19.1 mM) from influent with seawate…
▽ More
Faradaic deionization (FDI) is a promising technology for energy-efficient water desalination using porous electrodes containing redox-active materials. Herein, we demonstrate for the first time the capability of a symmetric FDI flow cell to produce freshwater (<17.1 mM NaCl) from concentrated brackish water (118mM), to produce effluent near freshwater salinity (19.1 mM) from influent with seawater-level salinity (496 mM), and to reduce the salinity of hypersaline brine from 781 mM to 227 mM. These remarkable salt-removal levels were enabled by using flow-through electrodes with high areal-loading of nickel hexacyanoferrate (NiHCF) Prussian Blue analogue intercalation material. The pumping energy consumption due to flow-through electrodes was mitigated by embedding an interdigitated array of <100 $μ$m wide channels in the electrodes using laser micromachining. The micron-scale dimensions of the resulting embedded, micro-interdigitated flow fields (e$μ$-IDFFs) facilitate flow-through electrodes with high apparent permeability while minimizing active-material loss. Our modeling shows that these e$μ$-IDFFs are more suitable for our intercalation electrodes because they have >100X lower permeability compared to common redox-flow battery electrodes, for which millimetric flow-channel widths were used exclusively in the past. Total desalination thermodynamic energy efficiency (TEE) was improved by more than ten-fold relative to unpatterned electrodes: 40.0% TEE for brackish water, 11.7% TEE for hypersaline brine, and 7.4% TEE for seawater-salinity feeds. Water transport between diluate and brine streams and charge efficiency losses resulting from (electro)chemical effects are implicated as limiting energy efficiency and water recovery, motivating their investigation for enhancing future FDI performance.
△ Less
Submitted 8 June, 2023;
originally announced June 2023.
-
Magnon squeezing by two-tone driving of a qubit in cavity-magnon-qubit systems
Authors:
Qi Guo,
Jiong Cheng,
Huatang Tan,
Jie Li
Abstract:
We propose a scheme for preparing magnon squeezed states in a hybrid cavity-magnon-qubit system. The system consists of a microwave cavity that simultaneously couples to a magnon mode of a macroscopic yttrium-iron-garnet (YIG) sphere via the magnetic-dipole interaction and to a transmon-type superconducting qubit via the electric-dipole interaction. By far detuning from the magnon-qubit system, th…
▽ More
We propose a scheme for preparing magnon squeezed states in a hybrid cavity-magnon-qubit system. The system consists of a microwave cavity that simultaneously couples to a magnon mode of a macroscopic yttrium-iron-garnet (YIG) sphere via the magnetic-dipole interaction and to a transmon-type superconducting qubit via the electric-dipole interaction. By far detuning from the magnon-qubit system, the microwave cavity is adiabatically eliminated. The magnon mode and the qubit then get effectively coupled via the mediation of virtual photons of the microwave cavity. We show that by driving the qubit with two microwave fields and by appropriately choosing the drive frequencies and strengths, magnonic parametric amplification can be realized, which leads to magnon quadrature squeezing with the noise below vacuum fluctuation. We provide optimal conditions for achieving magnon squeezing, and moderate squeezing can be obtained using currently available parameters. The generated squeezed states are of a magnon mode involving more than $10^{18}$ spins and thus macroscopic quantum states. The work may find promising applications in quantum information processing and high-precision measurements based on magnons and in the study of macroscopic quantum states.
△ Less
Submitted 28 November, 2023; v1 submitted 21 April, 2023;
originally announced April 2023.
-
Elucidating the Role of Prelithiation in Si-based Anodes for Interface Stabilization
Authors:
Shuang Bai,
Wurigumula Bao,
Kun Qian,
Bing Han,
Weikang Li,
Baharak Sayahpour,
Bhagath Screenarayanan,
Darren H. S. Tan,
So-yeon Ham,
Ying Shirley Meng
Abstract:
Prelithiation as a facile and effective method to compensate the lithium inventory loss in the initial cycle has progressed considerably both on anode and cathode sides. However, much less research has been devoted to the prelithiation effect on the interface stabilization for long-term cycling of Si-based anodes. An in-depth quantitative analysis of the interface that form during the prelithiatio…
▽ More
Prelithiation as a facile and effective method to compensate the lithium inventory loss in the initial cycle has progressed considerably both on anode and cathode sides. However, much less research has been devoted to the prelithiation effect on the interface stabilization for long-term cycling of Si-based anodes. An in-depth quantitative analysis of the interface that form during the prelithiation of SiO$_x$ is presented here and the results are compared with prelithiaton of Si anodes. Local structure probe combined with detailed electrochemical analysis reveals that a characteristic mosaic interface is formed on both prelithiated SiO$_x$ and Si anodes. This mosaic interface containing multiple lithium silicates phases, is fundamentally different from the solid electrolyte interface (SEI) formed without prelithiation. The ideal conductivity and mechanical properties of lithium silicates enable improved cycling stability of both prelithiated anodes. With a higher ratio of lithium silicates due to the oxygen participation, prelithiated SiO$_{1.3}$ anode improves the initial coulombic efficiency to 94% in full cell and delivers good cycling retention after hundreds cycles under lean electrolyte conditions. The insights provided in this work could be used to further optimize high Si loading based anode in future high energy density batteries.
△ Less
Submitted 13 April, 2023;
originally announced April 2023.
-
Precision theoretical determination of electric-dipole matrix elements in atomic cesium
Authors:
H. B. Tran Tan,
A. Derevianko
Abstract:
We compute the reduced electric-dipole matrix elements $\langle{nS_{1/2}}||D||{n'P_J}\rangle$ with $n=6,7$ and $n'=6,7,\ldots,12$ in cesium using the most complete to date ab initio relativistic coupled-cluster method which includes singles, doubles, perturbative core triples, and valence triples. Our results agree with previous calculations at the linearized single double level but also show larg…
▽ More
We compute the reduced electric-dipole matrix elements $\langle{nS_{1/2}}||D||{n'P_J}\rangle$ with $n=6,7$ and $n'=6,7,\ldots,12$ in cesium using the most complete to date ab initio relativistic coupled-cluster method which includes singles, doubles, perturbative core triples, and valence triples. Our results agree with previous calculations at the linearized single double level but also show large contributions from nonlinear singles and doubles as well as valence triples. We also calculate the normalized ratio $ξ_{n,n'}\equiv(1/\sqrt{2})\langle{nS_{1/2}}||D||{n'P_{1/2}}\rangle/\langle{nS_{1/2}}||D||{n'P_{3/2}}\rangle$ which is important for experimental determination of matrix elements. The ratios $ξ_{6,n}$ display large deviations from the nonrelativistic limit which we associate with Cooper-like minima. Several appendices are provided where we document the procedure for constructing finite basis sets and our implementation of the random phase approximation and Brueckner-orbitals method.
△ Less
Submitted 14 April, 2023; v1 submitted 7 March, 2023;
originally announced March 2023.
-
Pupil aberrations correction of the afocal telescope for the TianQin project
Authors:
Zichao Fan,
Zhengbo Zhu,
Huiru Ji,
Yan Mo,
Hao Tan,
Lujia Zhao,
Shengyi Cao,
Donglin Ma
Abstract:
TianQin is a planned Chinese space-based gravitational wave (GW) observatory with a frequency band of 10-4 to 1Hz. Optical telescopes are essential for the delivery of the measurement beam to support a precise distance measurement between pairs of proof masses. As the design is driven by the interferometric displacement sensitivity requirements, the stability control of optical path length (OPL) i…
▽ More
TianQin is a planned Chinese space-based gravitational wave (GW) observatory with a frequency band of 10-4 to 1Hz. Optical telescopes are essential for the delivery of the measurement beam to support a precise distance measurement between pairs of proof masses. As the design is driven by the interferometric displacement sensitivity requirements, the stability control of optical path length (OPL) is extremely important beyond the traditional requirement of diffraction-limited imaging quality. In a telescope system, the recurring tilt-to-length (TTL) coupling noise arises from the OPL variation due to the wavefront deformation and angular misalignment. The pupil aberrations are preferred option to understand the OPL specifications and further suppress TTL coupling noise. To correct the pupil aberrations, we derive primary pupil aberrations in a series expansion form, and then refine the formulation of merit function by combining the pupil aberration theory and traditional image aberration theory. The automatic correction of pupil aberrations is carried out by using the macro programming in the commercial optical software Zemax, leading to a high performance telescope design. The design results show that on one side the pupil aberrations have been corrected, and on the other side, its optical performance meets the requirements for TianQin project. The RMS wavefront error over the science field of view (FOV) is less than λ/200 and the maximum TTL coupling noise over the entire 300 urad FOV is 0.0034nm/urad. We believe that our design approach can be a good guide for the space telescope design in any other space-based GW detection project, as well as other similar optical systems.
△ Less
Submitted 6 March, 2023;
originally announced March 2023.
-
Direct Observation of Collective Modes of the Charge Density Wave in the Kagome Metal CsV$_3$Sb$_5$
Authors:
Doron Azoury,
Alexander von Hoegen,
Yifan Su,
Kyoung Hun Oh,
Tobias Holder,
Hengxin Tan,
Brenden R. Ortiz,
Andrea Capa Salinas,
Stephen D. Wilson,
Binghai Yan,
Nuh Gedik
Abstract:
A new group of kagome metals AV$_3$Sb$_5$ (A = K, Rb, Cs) exhibit a variety of intertwined unconventional electronic phases, which emerge from a puzzling charge density wave phase. Understanding of this parent charge order phase is crucial for deciphering the entire phase diagram. However, the mechanism of the charge density wave is still controversial, and its primary source of fluctuations - the…
▽ More
A new group of kagome metals AV$_3$Sb$_5$ (A = K, Rb, Cs) exhibit a variety of intertwined unconventional electronic phases, which emerge from a puzzling charge density wave phase. Understanding of this parent charge order phase is crucial for deciphering the entire phase diagram. However, the mechanism of the charge density wave is still controversial, and its primary source of fluctuations - the collective modes - have not been experimentally observed. Here, we use ultrashort laser pulses to melt the charge order in CsV$_3$Sb$_5$ and record the resulting dynamics using femtosecond angle-resolved photoemission. We resolve the melting time of the charge order and directly observe its amplitude mode, imposing a fundamental limit for the fastest possible lattice rearrangement time. These observations together with ab-initio calculations provide clear evidence for a structural rather than electronic mechanism of the charge density wave. Our findings pave the way for better understanding of the unconventional phases hosted on the kagome lattice.
△ Less
Submitted 24 January, 2023;
originally announced January 2023.
-
Pushing limits of photovoltaics and photodetection using radial junction nanowire devices
Authors:
Vidur Raj,
Yi Zhu,
Kaushal Vora,
Lan Fu,
Hark Hoe Tan,
Chennupati Jagadish
Abstract:
Nanowire devices have long been proposed as an efficient alternative to their planar counterparts for different optoelectronic applications. Unfortunately, challenges related to the growth and characterization of doping and p-n junction formation in nanowire devices (along axial or radial axis) have significantly impeded their development. The problems are further amplified if a p-n junction has t…
▽ More
Nanowire devices have long been proposed as an efficient alternative to their planar counterparts for different optoelectronic applications. Unfortunately, challenges related to the growth and characterization of doping and p-n junction formation in nanowire devices (along axial or radial axis) have significantly impeded their development. The problems are further amplified if a p-n junction has to be implemented radially. Therefore, even though radial junction devices are expected to be on par with their axial junction counterparts, there are minimal reports on high-performance radial junction nanowire optoelectronic devices. This paper summarizes our recent results on the simulation and fabrication of radial junction nanowire solar cells and photodetectors, which have shown unprecedented performance and clearly demonstrate the importance of radial junction for optoelectronic applications. Our simulation results show that the proposed radial junction device is both optically and electrically optimal for solar cell and photodetector applications, especially if the absorber quality is extremely low. The radial junction nanowire solar cells could achieve a 17.2% efficiency, whereas the unbiased radial junction photodetector could show sensitivity down to a single photon level using an absorber with a lifetime of less than 50 ps. In comparison, the axial junction planar device made using same substrate as absorber showed less than 1% solar cell efficiency and almost no photodetection at 0 V. This study is conclusive experimental proof of the superiority of radial junction nanowire devices over their thin film or axial junction counterparts, especially when absorber lifetime is extremely low. The proposed device holds huge promise for III-V based photovoltaics and photodetectors.
△ Less
Submitted 20 January, 2023;
originally announced January 2023.
-
High Resolution On-Chip Thin-Film Lithium Niobate Single-Photon Buffer
Authors:
Cagin Ekici,
Yonghe Yu,
Jeremy C. Adcock,
Alif Laila Muthali,
Heyun Tan,
Hao Li,
Leif Katsuo Oxenløwe,
Xinlun Cai,
Yunhong Ding
Abstract:
We experimentally demonstrate a room-temperature, voltage controlled, short-term quantum photonics memory on a lithium niobate chip. Our chip is capable of resolving 100 ps time steps with 0.74 dB loss per round-trip.
We experimentally demonstrate a room-temperature, voltage controlled, short-term quantum photonics memory on a lithium niobate chip. Our chip is capable of resolving 100 ps time steps with 0.74 dB loss per round-trip.
△ Less
Submitted 10 January, 2023;
originally announced January 2023.
-
Strong Room-Temperature Bulk Nonlinear Hall Effect in a Spin-Valley Locked Dirac Material
Authors:
Lujin Min,
Hengxin Tan,
Zhijian Xie,
Leixin Miao,
Ruoxi Zhang,
Seng Huat Lee,
Venkatraman Gopalan,
Chaoxing Liu,
Nasim Alem,
Binghai Yan,
Zhiqiang Mao
Abstract:
Nonlinear Hall effect (NLHE) is a new type of Hall effect with wide application prospects. Practical device applications require strong NLHE at room temperature (RT). However, previously reported NLHEs are all low-temperature phenomena except for the surface NLHE of TaIrTe4. Bulk RT NLHE is highly desired due to its ability to generate large photocurrent. Here, we show the spin-valley locked Dirac…
▽ More
Nonlinear Hall effect (NLHE) is a new type of Hall effect with wide application prospects. Practical device applications require strong NLHE at room temperature (RT). However, previously reported NLHEs are all low-temperature phenomena except for the surface NLHE of TaIrTe4. Bulk RT NLHE is highly desired due to its ability to generate large photocurrent. Here, we show the spin-valley locked Dirac state in BaMnSb2 can generate a strong bulk NLHE at RT. In the microscale devices, we observe the typical signature of an intrinsic NLHE, i.e. the transverse Hall voltage quadratically scales with the longitudinal current as the current is applied to the Berry curvature dipole direction. Furthermore, we also demonstrate our nonlinear Hall device's functionality in wireless microwave detection and frequency doubling. These findings broaden the coupled spin and valley physics from 2D systems into a 3D system and lay a foundation for exploring bulk NLHE's applications.
△ Less
Submitted 12 December, 2022;
originally announced December 2022.
-
Robust and Efficient Network Reconstruction in Complex System via Adaptive Signal Lasso
Authors:
Lei Shi,
Jie Hu,
Libin Jin,
Chen Shen,
Huaiyu Tan,
Dalei Yu
Abstract:
Network reconstruction is important to the understanding and control of collective dynamics in complex systems. Most real networks exhibit sparsely connected properties, and the connection parameter is a signal (0 or 1). Well-known shrinkage methods such as lasso or compressed sensing (CS) to recover structures of complex networks cannot suitably reveal such a property; therefore, the signal lasso…
▽ More
Network reconstruction is important to the understanding and control of collective dynamics in complex systems. Most real networks exhibit sparsely connected properties, and the connection parameter is a signal (0 or 1). Well-known shrinkage methods such as lasso or compressed sensing (CS) to recover structures of complex networks cannot suitably reveal such a property; therefore, the signal lasso method was proposed recently to solve the network reconstruction problem and was found to outperform lasso and CS methods. However, signal lasso suffers the problem that the estimated coefficients that fall between 0 and 1 cannot be successfully selected to the correct class. We propose a new method, adaptive signal lasso, to estimate the signal parameter and uncover the topology of complex networks with a small number of observations. The proposed method has three advantages: (1) It can effectively uncover the network topology with high accuracy and is capable of completely shrinking the signal parameter to either 0 or 1, which eliminates the unclassified portion in network reconstruction; (2) The method performs well in scenarios of both sparse and dense signals and is robust to noise contamination; (3) The method only needs to select one tuning parameter versus two in signal lasso, which greatly reduces the computational cost and is easy to apply. The theoretical properties of this method are studied, and numerical simulations from linear regression, evolutionary games, and Kuramoto models are explored. The method is illustrated with real-world examples from a human behavioral experiment and a world trade web.
△ Less
Submitted 21 November, 2022;
originally announced November 2022.
-
Decoupling the Roles of Defects/Impurities and Wrinkles in Thermal Conductivity of Wafer-scale hBN Films
Authors:
Kousik Bera,
Dipankar Chugh,
Aditya Bandopadhyay,
Hark Hoe Tan,
Anushree Roy,
Chennupati Jagadish
Abstract:
We demonstrate a non-monotonic evolution of thermal conductivity of large-area hexagonal boron nitride films with thickness. Wrinkles and defects/impurities are present in these films. Raman spectroscopy, an optothermal non-contact technique, is employed to probe the temperature and laser power dependence property of the Raman active E2ghigh phonon mode, which in turn is used to estimate the rise…
▽ More
We demonstrate a non-monotonic evolution of thermal conductivity of large-area hexagonal boron nitride films with thickness. Wrinkles and defects/impurities are present in these films. Raman spectroscopy, an optothermal non-contact technique, is employed to probe the temperature and laser power dependence property of the Raman active E2ghigh phonon mode, which in turn is used to estimate the rise in the temperature of the films under different laser powers. As the conventional Fourier law of heat diffusion cannot be directly employed analytically to evaluate the thermal conductivity of these films with defects and wrinkles, finite element modeling is used instead. In the model, average heat resistance is used to incorporate an overall defect structure, and Voronoi cells with contact resistance at the cell boundaries are constructed to mimic the wrinkled domains. The effective thermal conductivity is estimated to be 87, 55, and 117 W/m.K for the 2, 10, and 30 nm-thick films, respectively. We also present a quantitative estimation of the thermal resistance by defects and wrinkles individually to the heat flow. Our study reveals that the defects/impurities render a much higher resistance to heat transfer in the films than wrinkles.
△ Less
Submitted 21 June, 2023; v1 submitted 16 November, 2022;
originally announced November 2022.
-
Nanoscale 3D tomography by in-flight fluorescence spectroscopy of atoms sputtered by a focused ion beam
Authors:
Garrett Budnik,
John Scott,
Chengge Jiao,
Mostafa Maazouz,
Galen Gledhill,
Lan Fu,
Hark Hoe Tan,
Milos Toth
Abstract:
Nanoscale fabrication and characterisation techniques critically underpin a vast range of fields, including materials science, nanoelectronics and nanobiotechnology. Focused ion beam (FIB) techniques are particularly appealing due to their high spatial resolution and widespread use for processing of nanostructured materials and devices. Here, we introduce FIB-induced fluorescence spectroscopy (FIB…
▽ More
Nanoscale fabrication and characterisation techniques critically underpin a vast range of fields, including materials science, nanoelectronics and nanobiotechnology. Focused ion beam (FIB) techniques are particularly appealing due to their high spatial resolution and widespread use for processing of nanostructured materials and devices. Here, we introduce FIB-induced fluorescence spectroscopy (FIB-FS) as a nanoscale technique for spectroscopic detection of atoms sputtered by an ion beam. We use semiconductor heterostructures to demonstrate nanoscale lateral and depth resolution and show that it is limited by ion-induced intermixing of nanostructured materials. Sensitivity is demonstrated qualitatively by depth-profiling of 3.5, 5 and 8 nm quantum wells, and quantitatively by detection of trace-level impurities present at parts-per-million levels. To showcase the utility of the FIB-FS technique, we use it to characterise quantum wells and Li-ion batteries. Our work introduces FIB-FS as a high-resolution, high sensitivity, 3D analysis and tomography technique that combines the versatility of FIB nanofabrication techniques with the power of diffraction-unlimited fluorescence spectroscopy. It is applicable to all elements in the periodic table, and enables real-time analysis during direct-write nanofabrication by focused ion beams.
△ Less
Submitted 21 June, 2022;
originally announced June 2022.
-
Implications of W-boson mass anomaly for atomic parity violation
Authors:
H. B. Tran Tan,
A. Derevianko
Abstract:
We consider the implication of the recent measurement of the W-boson mass $M_W$ [Science 376, 170 (2022)] for atomic parity violation experiments. We show that the change in $M_W$ shifts the Standard Model prediction for the ${}^{133}$Cs nuclear weak charge to $Q_W({}^{133}{\rm Cs})=-72.85(6)$, i.e. by $5.5σ$ from its current value. This brings existing experimental result for…
▽ More
We consider the implication of the recent measurement of the W-boson mass $M_W$ [Science 376, 170 (2022)] for atomic parity violation experiments. We show that the change in $M_W$ shifts the Standard Model prediction for the ${}^{133}$Cs nuclear weak charge to $Q_W({}^{133}{\rm Cs})=-72.85(6)$, i.e. by $5.5σ$ from its current value. This brings existing experimental result for $Q_W({}^{133}{\rm Cs})$ into an essential agreement with the Standard Model. Using our revised value for $Q_W({}^{133}{\rm Cs})$, we readjust constraints on physics beyond the Standard Model.
△ Less
Submitted 3 May, 2022; v1 submitted 25 April, 2022;
originally announced April 2022.
-
Demonstration of sub-GV/m Accelerating Field in a Photoemission Electron Gun Powered by Nanosecond $X$-Band Radiofrequency Pulses
Authors:
W. H. Tan,
S. Antipov,
D. S. Doran,
G. Ha,
C. Jing,
E. Knight,
S. Kuzikov,
W. Liu,
X. Lu,
P. Piot,
J. G. Power,
J. Shao,
C. Whiteford,
E. E. Wisniewski
Abstract:
Radiofrequency (RF) electron guns operating at high accelerating gradients offer a pathway to producing bright electron bunches. Such beams are expected to revolutionize many areas of science: they could form the backbone of next-generation compact x-ray free-electron lasers or provide coherent ultrafast quantum electron probes. We report on the experimental demonstration of an RF photoemission el…
▽ More
Radiofrequency (RF) electron guns operating at high accelerating gradients offer a pathway to producing bright electron bunches. Such beams are expected to revolutionize many areas of science: they could form the backbone of next-generation compact x-ray free-electron lasers or provide coherent ultrafast quantum electron probes. We report on the experimental demonstration of an RF photoemission electron source supporting an accelerating field close to 400~MV/m at the photocathode surface. The gun was operated in an RF transient mode driven by short $\sim 9$~ns X-band (\SI{11.7}{\giga\hertz}) RF pulses. We did not observe any major RF breakdown or significant dark current over a three-week experimental run at high accelerating fields. The demonstrated paradigm provides a viable path to forming relativistic electron beams with unprecedented brightness.
△ Less
Submitted 22 March, 2022;
originally announced March 2022.
-
Optical characterization of deuterated silicon-rich nitride waveguides
Authors:
Xavier X. Chia,
George F. R. Chen,
Yanmei Cao,
Peng Xing,
Doris K. T. Ng,
Dawn T. H. Tan
Abstract:
Chemical vapor deposition-based growth techniques allow flexible design of CMOS-compatible materials. Here, we report the deuterated silicon-rich nitride films grown using plasma-enhanced chemical vapor deposition. The linear and nonlinear properties of the films are characterized. We compare the absorption at 1550nm wavelength region for films grown with $SiH_4$ and $SiD_4$, and experimentally co…
▽ More
Chemical vapor deposition-based growth techniques allow flexible design of CMOS-compatible materials. Here, we report the deuterated silicon-rich nitride films grown using plasma-enhanced chemical vapor deposition. The linear and nonlinear properties of the films are characterized. We compare the absorption at 1550nm wavelength region for films grown with $SiH_4$ and $SiD_4$, and experimentally confirm that the silicon-rich nitride films grown with $SiD_4$ eliminates Si-H related absorption. Waveguides fabricated on the films are further shown to possess a linear and nonlinear refractive index of 2.46 and $9.8$ X $10^{-18} m^2 W^{-1}$ respectively.
△ Less
Submitted 21 February, 2022;
originally announced February 2022.
-
Anthropic constraint on transient variations of fundamental constants
Authors:
Vsevolod D. Dergachev,
Hoang Bao Tran Tan,
Sergey A. Varganov,
Andrei Derevianko
Abstract:
The anthropic principle implies that life can emerge and be sustained only in a narrow range of values of fundamental constants. Here we show that anthropic arguments can set powerful constraints on {\em transient} variations of the fine-structure constant $α$ over the past 4 billion years since the appearance of lifeforms on Earth. We argue that the passage through Earth of a macroscopic dark mat…
▽ More
The anthropic principle implies that life can emerge and be sustained only in a narrow range of values of fundamental constants. Here we show that anthropic arguments can set powerful constraints on {\em transient} variations of the fine-structure constant $α$ over the past 4 billion years since the appearance of lifeforms on Earth. We argue that the passage through Earth of a macroscopic dark matter clump with a value of $α$ inside differing substantially from its nominal value would make Earth uninhabitable. We demonstrate that in the regime of extreme variation of $α$, the periodic table of elements is truncated, water fails to serve as a universal solvent, and protons become unstable. Thereby, the anthropic principle constrains the likelihood of such encounters on a 4-billion-year timescale. This enables us to improve existing astrophysical bounds on certain dark matter model couplings by several orders of magnitude.
△ Less
Submitted 9 June, 2023; v1 submitted 8 February, 2022;
originally announced February 2022.
-
Single-photon blockade in quasichiral atom-photon interaction: Simultaneous high purity and high efficiency
Authors:
Yu-Wei Lu,
Jing-Feng Liu,
Runhua Li,
Haishu Tan,
Yanxiong Wu,
Yongyao Li
Abstract:
We investigate the single-photon blockade (1PB) in the quasichiral regime of atom-photon interaction that mediates via dissipative environment, where the effective atom-photon interaction is asymmetrical but achiral. The synthetic magnetic current in the closed-loop coupling breaks down the reciprocity of atom-photon interaction, resulting in an asymmetrical and even completely unidirectional effe…
▽ More
We investigate the single-photon blockade (1PB) in the quasichiral regime of atom-photon interaction that mediates via dissipative environment, where the effective atom-photon interaction is asymmetrical but achiral. The synthetic magnetic current in the closed-loop coupling breaks down the reciprocity of atom-photon interaction, resulting in an asymmetrical and even completely unidirectional effective coupling between two selected quantum states. As an example, we couple the single-atom cavity-QED (cQED) system to a strongly dissipative auxiliary cavity. We find that in the quasichiral regime, the unconventional photon blockade (UPB) always incorporates with the conventional photon blockade (CPB) in the condition of maximum chirality. Furthermore, we show that 1PB in the quasichiral regime combines the advantages of UPB and CPB, demonstrating the perfect single-photon purity, higher efficiency, smooth time dynamics as well as lower requirement of modes coupling to achieve UPB. Our work paves the way for 1PB towards practical applications and reveals the intriguing quantum-optics phenomena in the quasichiral light-matter interaction.
△ Less
Submitted 28 December, 2021;
originally announced December 2021.
-
Parity-mixed coupled-cluster formalism for computing parity-violating amplitudes
Authors:
H. B. Tran Tan,
Di Xiao,
A. Derevianko
Abstract:
We formulate a parity-mixed coupled-cluster (PM-CC) approach for high-precision calculations of parity non-conserving amplitudes in mono-valent atoms. Compared to the conventional formalism which uses parity-proper (PP) one-electron orbitals, the PM-CC method is built using parity-mixed (PM) orbitals. The PM orbitals are obtained by solving the Dirac-Hartree-Fock equation with the electron-nucleus…
▽ More
We formulate a parity-mixed coupled-cluster (PM-CC) approach for high-precision calculations of parity non-conserving amplitudes in mono-valent atoms. Compared to the conventional formalism which uses parity-proper (PP) one-electron orbitals, the PM-CC method is built using parity-mixed (PM) orbitals. The PM orbitals are obtained by solving the Dirac-Hartree-Fock equation with the electron-nucleus electroweak interaction included (PM-DHF). There are several advantages to such a PM-CC formulation: (i) reduced role of correlations, as for the most experimentally-accurate to date ${}^{133}{\rm Cs}\,$ $6S_{1/2}-7S_{1/2}$ transition, the PM-DHF result is only 3% away from the accurate many-body value, while the conventional DHF result is off by 18%; (ii) avoidance of directly summing over intermediate states in expressions for parity non-conserving amplitudes which reduces theoretical uncertainties associated with highly-excited and core-excited intermediate states, and (iii) relatively straightforward upgrade of existing and well-tested large-scale PP-CC codes. We reformulate the CC method in terms of the PM-DHF basis and demonstrate that the cluster amplitudes are complex numbers with opposite parity real and imaginary parts. We then use this fact to map out a strategy through which the new PM-CC scheme may be implemented.
△ Less
Submitted 27 January, 2022; v1 submitted 7 December, 2021;
originally announced December 2021.
-
Tapered helical undulator system for high efficiency energy extraction from a high brightness electron beam
Authors:
Y. Park,
R. Agustsson,
W. J. Berg,
J. Byrd,
T. J. Campese,
D. Dang,
P. Denham,
J. Dooling,
A. Fisher,
I. Gadjev,
C. Hall,
J. Isen,
J. Jin,
A. H. Lumpkin,
A. Murokh,
Y. Sun,
W. H. Tan,
S. Webb,
K. P. Wootton,
A. A. Zholents,
P. Musumeci
Abstract:
In this paper we discuss the design choices and construction strategy of the tapered undulator system designed for a high energy extraction efficiency experiment in the ultraviolet region of the electromagnetic spectrum planned for installation at the Argonne National Laboratory Linac Extension Area (LEA) beamline. The undulator is comprised of 4 sections pure permanent magnet Halbach array separa…
▽ More
In this paper we discuss the design choices and construction strategy of the tapered undulator system designed for a high energy extraction efficiency experiment in the ultraviolet region of the electromagnetic spectrum planned for installation at the Argonne National Laboratory Linac Extension Area (LEA) beamline. The undulator is comprised of 4 sections pure permanent magnet Halbach array separated by short break sections, each one of them housing a focusing quadrupole doublet and a phase shifter. The quadrupoles use a novel hybrid design which allows one to vary the gradient and match the beam transversely. The undulator tapering profile is optimized to maximize the energy conversion efficiency from a 343 MeV 1 kA beam into coherent 257.5 nm radiation taking into account the longitudinal current profile generated by the linac.
△ Less
Submitted 30 November, 2021; v1 submitted 22 November, 2021;
originally announced November 2021.
-
High Spots for the Ice-Fishing Problem with Surface Tension
Authors:
Nathan Willis,
Chee Han Tan,
Christel Hohenegger,
Braxton Osting
Abstract:
In the ice-fishing problem, a half-space of fluid lies below an infinite rigid plate (``the ice'') with a hole. In this paper, we investigate the ice-fishing problem including the effects of surface tension on the free surface. The dimensionless number that describes the effect of surface tension is called the Bond number. For holes that are infinite parallel strips or circular holes, we transform…
▽ More
In the ice-fishing problem, a half-space of fluid lies below an infinite rigid plate (``the ice'') with a hole. In this paper, we investigate the ice-fishing problem including the effects of surface tension on the free surface. The dimensionless number that describes the effect of surface tension is called the Bond number. For holes that are infinite parallel strips or circular holes, we transform the problem to an equivalent eigenvalue integro-differential equation on an interval and expand in the appropriate basis (Legendre and radial polynomials, respectively). We use computational methods to demonstrate that the high spot, i.e., the maximal elevation of the fundamental sloshing profile, for the IFP is in the interior of the free surface for large Bond numbers, but for sufficiently small Bond number the high spot is on the boundary of the free surface. While several papers have proven high spot results in the absence of surface tension as it depends on the shape of the container, as far as we are aware, this is the first study investigating the effects of surface tension on the location of the high spot.
△ Less
Submitted 12 November, 2021;
originally announced November 2021.
-
Microresonator Frequency Comb Based High-Speed Transmission of Intensity Modulated Direct Detection Data
Authors:
Peng Xing,
George F. R. Chen,
Hongwei Gao,
Anuradha M. Agarwal,
Lionel C. Kimerling,
Dawn T. H. Tan
Abstract:
Globally, the long-haul transmission of ultra-high bandwidth data is enabled through coherent communications. Driven by the rapid pace of growth in interconnectivity over the last decade, long-haul data transmission has reached capacities on the order of tens to hundreds of terabits per second, over fiber reaches which may span thousands of kilometers. Data center communications however operate in…
▽ More
Globally, the long-haul transmission of ultra-high bandwidth data is enabled through coherent communications. Driven by the rapid pace of growth in interconnectivity over the last decade, long-haul data transmission has reached capacities on the order of tens to hundreds of terabits per second, over fiber reaches which may span thousands of kilometers. Data center communications however operate in a different regime, featuring shorter reaches and characterized as being more cost and power sensitive. While integrated microresonator frequency combs are poised to revolutionize light sources used for high-speed data transmission over fiber, their use has been limited to coherent detection schemes. In this paper, we demonstrate the use of microresonator frequency combs pumped with a single laser for the transmission of high-speed data, importantly using direct detection schemes. We achieve 120 Gb/s and 240 Gb/s aggregate data transmission for 30 Gb/s non-return-to-zero (NRZ) and 60 Gb/s pulse modulation amplitude 4 (PAM4) modulation formats respectively over 2 km of optical fiber, exceeding the reach, single lane data rate, and aggregate data rates specified in Parallel Single Mode 4 (PSM4) and Course Wavelength Division Multiplex 4 (CWDM4) multi-source agreements. Remarkably, we achieve an extremely low power penalty of 0.1 dB compared to back-to-back characterization. The results firmly cement CMOS-compatible micro-resonator frequency combs based high-speed data transmission as a viable technology for the cost and power sensitive data center transceiver industry.
△ Less
Submitted 12 November, 2021;
originally announced November 2021.
-
An Isoperimetric Sloshing Problem in a Shallow Container with Surface Tension
Authors:
Chee Han Tan,
Christel Hohenegger,
Braxton Osting
Abstract:
In 1965, B. A. Troesch solved the isoperimetric sloshing problem of determining the container shape that maximizes the fundamental sloshing frequency among two classes of shallow containers: symmetric canals with a given free surface width and cross-sectional area, and radially symmetric containers with a given rim radius and volume [doi:10.1002/cpa.3160180124]. Here, we extend these results in tw…
▽ More
In 1965, B. A. Troesch solved the isoperimetric sloshing problem of determining the container shape that maximizes the fundamental sloshing frequency among two classes of shallow containers: symmetric canals with a given free surface width and cross-sectional area, and radially symmetric containers with a given rim radius and volume [doi:10.1002/cpa.3160180124]. Here, we extend these results in two ways: (i) we consider surface tension effects on the fluid free surface, assuming a flat equilibrium free surface together with a pinned contact line, and (ii) we consider sinusoidal waves traveling along the canal with wavenumber $α\ge 0$ and spatial period $2π/α$; two-dimensional sloshing corresponds to the case $α= 0$. Generalizing our recent variational characterization of fluid sloshing with surface tension to the case of a pinned contact line, we derive the pinned-edge linear shallow sloshing problem, which is an eigenvalue problem for a generalized Sturm-Liouville system. In the case without surface tension, we show that the optimal shallow canal is a rectangular canal for any $α> 0$. In the presence of surface tension, we solve for the maximizing cross-section explicitly for shallow canals with any given $α\ge 0$ and shallow radially symmetric containers with $m$ azimuthal nodal lines, $m = 0, 1$. Our results reveal that the squared maximal sloshing frequency increases considerably as surface tension increases. Interestingly, both the optimal shallow canal for $α= 0$ and the optimal shallow radially symmetric container are not convex. As a consequence of our explicit solutions, we establish convergence of the maximizing cross-sections, as surface tension vanishes, to the maximizing cross-sections without surface tension.
△ Less
Submitted 20 July, 2022; v1 submitted 5 November, 2021;
originally announced November 2021.
-
Regularization of Complex Langevin Method
Authors:
Zhenning Cai,
Yang Kuang,
Hong Kiat Tan
Abstract:
The complex Langevin method, a numerical method used to compute the ensemble average with a complex partition function, often suffers from runaway instability. We study the regularization of the complex Langevin method via augmenting the action with a stabilization term. Since the regularization introduces biases to the numerical result, two approaches, named 2R and 3R methods, are introduced to r…
▽ More
The complex Langevin method, a numerical method used to compute the ensemble average with a complex partition function, often suffers from runaway instability. We study the regularization of the complex Langevin method via augmenting the action with a stabilization term. Since the regularization introduces biases to the numerical result, two approaches, named 2R and 3R methods, are introduced to recover the unbiased result. The 2R method supplements the regularization with regression to estimate the unregularized ensemble average, and the 3R method reduces the computational cost by coupling the regularization with a reweighting strategy before regression. Both methods can be generalized to the SU(n) theory and are assessed from several perspectives. Several numerical experiments in the lattice field theory are carried out to show the effectiveness of our approaches.
△ Less
Submitted 26 September, 2021;
originally announced September 2021.
-
Observation of high efficiency Betatron radiation from femtosecond petawatt laser irradiated near critical plasmas
Authors:
J. H. Tan,
Y. F. Li,
D. Z. Li,
J. Feng,
Y. J. Li,
W. J. Zhou,
Y. H. Yan,
Z. M. Zhang,
B. L. Zhang,
J. G. Wang,
Y. Q. Gu,
Y. T. Li,
L. M. Chen
Abstract:
We present an experimental demonstration of high conversion efficiency Betatron x-ray radiation from petawatt laser irradiated near critical plasmas. Direct laser acceleration serves as the dominant regime when laser pulse of ~5e20 W/cm2 intensity is focused into plasmas with electron density of 3e20 /cm3. Electron beam with a charge of ~35 nC is accelerated up to a maximum energy of 70 MeV and em…
▽ More
We present an experimental demonstration of high conversion efficiency Betatron x-ray radiation from petawatt laser irradiated near critical plasmas. Direct laser acceleration serves as the dominant regime when laser pulse of ~5e20 W/cm2 intensity is focused into plasmas with electron density of 3e20 /cm3. Electron beam with a charge of ~35 nC is accelerated up to a maximum energy of 70 MeV and emit x-rays when oscillating in the laser field. The deduced energy conversion efficiency from laser to x-rays is up to 1e-4, orders of magnitude higher than other betatron regimes. Enhancement of acceleration and radiation with sharp plasma density boundary is also obtained and further interpretated with 2D particle-in-cell simulations.
△ Less
Submitted 25 September, 2021;
originally announced September 2021.