Showing 1–50 of 85 results for author: Takahashi, T

Few-electron highly charged muonic Ar atoms verified by electronic $K$ x rays

Authors: T. Okumura, T. Azuma, D. A. Bennett, W. B. Doriese, M. S. Durkin, J. W. Fowler, J. D. Gard, T. Hashimoto, R. Hayakawa, Y. Ichinohe, P. Indelicato, T. Isobe, S. Kanda, D. Kato, M. Katsuragawa, N. Kawamura, Y. Kino, N. Kominato, Y. Miyake, K. M. Morgan, H. Noda, G. C. O'Neil, S. Okada, K. Okutsu, N. Paul , et al. (18 additional authors not shown)

Abstract: Electronic $K$ x rays emitted by muonic Ar atoms in the gas phase were observed using a superconducting transition-edge-sensor microcalorimeter. The high-precision energy spectra provided a clear signature of the presence of muonic atoms accompanied by a few electrons, which have never been observed before. One-, two-, and three-electron bound, i.e., H-like, He-like, and Li-like, muonic Ar atoms w… ▽ More Electronic $K$ x rays emitted by muonic Ar atoms in the gas phase were observed using a superconducting transition-edge-sensor microcalorimeter. The high-precision energy spectra provided a clear signature of the presence of muonic atoms accompanied by a few electrons, which have never been observed before. One-, two-, and three-electron bound, i.e., H-like, He-like, and Li-like, muonic Ar atoms were identified from electronic $K$ x rays and hyper-satellite $K$ x rays. These $K$ x rays are emitted after the charge transfer process by the collisions with surrounding Ar atoms. With the aid of theoretical calculations, we confirmed that the peak positions are consistent with the x-ray energies from highly charged Cl ions, and the intensities reflecting deexcitation dynamics were successfully understood by taking into account the interaction between the muon and bound electrons. △ Less

Submitted 10 July, 2024; originally announced July 2024.

Development of Rotating Target with Ferrofluid Seal for ILC Electron-Driven Positron Source

Authors: Tsunehiko Omori, Kaoru Yokoya, Junji Urakawa, Tohru Takahashi, Masao Kuriki, Masakazu Washio, Masaru Kuribayashi, Masaaki Yamakata, Chie Nakaishi

Abstract: In the ILC electron-driven positron source, acceleration tubes are located immediately downstream of the positron generation target to capture the generated positrons, necessitating high vacuum for their operation. We designed a rotating target using a ferrofluid rotating vacuum seal that can stably maintain a vacuum of 10-6 Pa and a tangential velocity of 5 m/sec, which meets the requirements of… ▽ More In the ILC electron-driven positron source, acceleration tubes are located immediately downstream of the positron generation target to capture the generated positrons, necessitating high vacuum for their operation. We designed a rotating target using a ferrofluid rotating vacuum seal that can stably maintain a vacuum of 10-6 Pa and a tangential velocity of 5 m/sec, which meets the requirements of the ILC positron source. We fabricated a full-scale prototype and confirmed the compatibility of rotation and stable vacuum maintenance. Various tests on the radiation resistance of the ferrofluid demonstrated its ability to withstand six years of radiation exposure in normal ILC operation without degradation and to continue exhibiting vacuum sealing performance. Radiation exposure tests on a small-scale target with a structure and material similar to the full-scale target confirmed its operability after two years of radiation exposure in normal ILC operation. The design, including thermal load, stress analysis, and cooling, led to the conclusion of an estimated lifespan of the target of over one year, based on comparison with the SLC target. These results demonstrate and establish the technology of positron generation targets in the ILC electron-driven positron source. △ Less

Submitted 30 June, 2024; originally announced July 2024.

Comments: 72 pages, 46 figures; https://lib-extopc.kek.jp/preprints/PDF/2023/2324/2324004.pdf

Report number: KEK Report 2023-4

Designing gradient coils with the shape derivative and the closed B-spline curves

Authors: Toru Takahashi

Abstract: This study proposes a versatile and efficient optimisation method for discrete coils that induce a magnetic field by their steady currents. The prime target is gradient coils for MRI (Magnetic Resonance Imaging). The derivative (gradient) of the $z$-component the magnetic field, which is calculated by the Biot--Savart's law, with respect to the $z$-coordinate in the Cartesian $xyz$ coordinate syst… ▽ More This study proposes a versatile and efficient optimisation method for discrete coils that induce a magnetic field by their steady currents. The prime target is gradient coils for MRI (Magnetic Resonance Imaging). The derivative (gradient) of the $z$-component the magnetic field, which is calculated by the Biot--Savart's law, with respect to the $z$-coordinate in the Cartesian $xyz$ coordinate system is considered as the objective function. Then, the derivative of the objective function with respect to a change of coils in shape is formulated according to the concept of shape optimisation. The resulting shape derivative (as well as the Biot--Savart's law) is smoothly discretised with the closed B-spline curves. In this case, the control points (CPs) of the curves are naturally selected as the design variables. As a consequence, the shape derivative is discretised to the sensitivities of the objective function with respect to the CPs. Those sensitivities are available to solve the present shape-optimisation problem with a certain gradient-based nonlinear-programming solver. The numerical examples exhibit the mathematical reliability, computational efficiency, and engineering applicability of the proposed methodology based on the shape derivative/sensitivities and the closed B-spline curves. △ Less

Submitted 1 April, 2024; originally announced April 2024.

Demonstration of nuclear gamma-ray polarimetry based on a multi-layer CdTe Compton Camera

Authors: S. Go, Y. Tsuzuki, H. Yoneda, Y. Ichikawa, T. Ikeda, N. Imai, K. Imamura, M. Niikura, D. Nishimura, R. Mizuno, S. Takeda, H. Ueno, S. Watanabe, T. Y. Saito, S. Shimoura, S. Sugawara, A. Takamine, T. Takahashi

Abstract: To detect and track structural changes in atomic nuclei, the systematic study of nuclear levels with firm spin-parity assignments is important. While linear polarization measurements have been applied to determine the electromagnetic character of gamma-ray transitions, the applicable range is strongly limited due to the low efficiency of the detection system. The multi-layer Cadmium-Telluride (CdT… ▽ More To detect and track structural changes in atomic nuclei, the systematic study of nuclear levels with firm spin-parity assignments is important. While linear polarization measurements have been applied to determine the electromagnetic character of gamma-ray transitions, the applicable range is strongly limited due to the low efficiency of the detection system. The multi-layer Cadmium-Telluride (CdTe) Compton camera can be a state-of-the-art gamma-ray polarimeter for nuclear spectroscopy with the high position sensitivity and the detection efficiency. We demonstrated the capability to operate this detector as a reliable gamma-ray polarimeter by using polarized 847-keV gamma rays produced by the $^{56}\rm{Fe}({\it p},{\it p'}γ)$ reaction. By combining the experimental data and simulated calculations, the modulation curve for the gamma ray was successfully obtained. A remarkably high polarization sensitivity was achieved, compatible with a reasonable detection efficiency. Based on the obtained results, a possible future gamma-ray polarimetery is discussed. △ Less

Submitted 14 February, 2024; originally announced February 2024.

Journal ref: Scientific Reports volume 14, Article number: 2573 (2024)

2-mm-Thick Large-Area CdTe Double-sided Strip Detectors for High-Resolution Spectroscopic Imaging of X-ray and Gamma-ray with Depth-Of-Interaction Sensing

Authors: Takahiro Minami, Miho Katsuragawa, Shunsaku Nagasawa, Shin'ichiro Takeda, Shin Watanabe, Yutaka Tsuzuki, Tadayuki Takahashi

Abstract: We developed a 2-mm-thick CdTe double-sided strip detector (CdTe-DSD) with a 250 um strip pitch, which has high spatial resolution with a uniform large imaging area of 10 cm$^2$ and high energy resolution with high detection efficiency in tens to hundreds keV. The detector can be employed in a wide variety of fields for quantitative observations of hard X-ray and soft gamma-ray with spectroscopic… ▽ More We developed a 2-mm-thick CdTe double-sided strip detector (CdTe-DSD) with a 250 um strip pitch, which has high spatial resolution with a uniform large imaging area of 10 cm$^2$ and high energy resolution with high detection efficiency in tens to hundreds keV. The detector can be employed in a wide variety of fields for quantitative observations of hard X-ray and soft gamma-ray with spectroscopic imaging, for example, space observation, nuclear medicine, and non-destructive elemental analysis. This detector is thicker than the 0.75-mm-thick one previously developed by a factor of $\sim$2.7, thus providing better detection efficiency for hard X-rays and soft gamma rays. The increased thickness could potentially enhance bias-induced polarization if we do not apply sufficient bias and if we do not operate at a low temperature, but the polarization is not evident in our detector when a high voltage of 500 V is applied to the CdTe diode and the temperature is maintained at -20 $^\circ$C during one-day experiments. The ''Depth Of Interaction'' (DOI) dependence due to the CdTe diode's poor carrier-transport property is also more significant, resulting in much DOI information while complicated detector responses such as charge sharings or low-energy tails that exacerbate the loss in the energy resolution. In this paper, we developed 2-mm-thick CdTe-DSDs, studied their response, and evaluated their energy resolution, spatial resolution, and uniformity. We also constructed a theoretical model to understand the detector response theoretically, resulting in reconstructing the DOI with an accuracy of 100 um while estimating the carrier-transport property. We realized the detector that has high energy resolution and high 3D spatial resolution with a uniform large imaging area. △ Less

Submitted 17 December, 2023; v1 submitted 13 December, 2023; originally announced December 2023.

Comments: 13 pages, 11 figures, 1 table, Accepted for publication in NIM A

Photon radiation calorimetry for anomalous heat generation in NiCu multilayer thin film during hydrogen gas desorption

Authors: J. Kasagi, T. Itoh, Y. Shibasaki, T. Takahashi, S. Yamauchi, Y. Iwamura

Abstract: In order to investigate the anomalous heat effect (AHE) in NiCu multilayer thin film, photon radiation calorimetry has been developed. Three types of photon detectors are employed to cover a wide range of wavelengths from 0.3 nm to 5.5 um, i.e., photon energies from 0.2 to 1.8 eV. In the present work, the usefullness of the calorimetry is demonstrated for excess heat measurements with samples of N… ▽ More In order to investigate the anomalous heat effect (AHE) in NiCu multilayer thin film, photon radiation calorimetry has been developed. Three types of photon detectors are employed to cover a wide range of wavelengths from 0.3 nm to 5.5 um, i.e., photon energies from 0.2 to 1.8 eV. In the present work, the usefullness of the calorimetry is demonstrated for excess heat measurements with samples of Ni pure, NiCu composite layers, and Cu layer deposited on the Ni substrate. Direct comparisons of photon radiation spectra with and without H2 easily showed sample-specific differences in excess heat power. The samples of NiCu composite layer produced larger excess heat. By incorporating the measured radiant power into a heat flow model, the excess heat was deduced to be 4 - 6 W. The energy generated in 80 hours reached to 520 +/- 120 kJ: the generated energy per hydrogen was at least 460 +/- 108 keV/H atom. This is definitely not a chemical reaction, but producing energy at the level of nuclear reactions. △ Less

Submitted 4 December, 2023; v1 submitted 30 November, 2023; originally announced November 2023.

Comments: 6 pages, 6 figures

LLRF upgrade status at the KEK Photon Factory 2.5 GeV ring

Authors: D. Naito, N. Yamamoto, T. Takahashi, A. Motomura, S. Sakanaka

Abstract: In 2023, we are replacing the LLRF system for the KEK-PF 2.5 GeV ring. The new system is composed of digital boards such as eRTM, AMC, and μRTM, based on the MTCA.4 standard. In our system, we adopted the non-IQ direct sampling method for RF detection. We set the sampling frequency at 8/13 (307.75 MHz) of the RF frequency, where the denominator (13) is the divisor of the harmonic number (312) of t… ▽ More In 2023, we are replacing the LLRF system for the KEK-PF 2.5 GeV ring. The new system is composed of digital boards such as eRTM, AMC, and μRTM, based on the MTCA.4 standard. In our system, we adopted the non-IQ direct sampling method for RF detection. We set the sampling frequency at 8/13 (307.75 MHz) of the RF frequency, where the denominator (13) is the divisor of the harmonic number (312) of the storage ring. This allows us to detect the transient variation of the cavity voltage that is synchronized with the beam revolution. We also plan to compensate for the voltage variation by implementing a feedforward technique. These functions will be useful in a double RF system for KEK future synchrotron light source. Production and installation of the new system were complete and the new system is under commissioning. In this presentation, we introduce our new system and report the upgrade status. △ Less

Submitted 21 October, 2023; originally announced October 2023.

Comments: Talk presented at LLRF Workshop 2023 (LLRF2023, arXiv: 2310.03199)

Report number: LLRF2023/29

A fast time-domain boundary element method for three-dimensional electromagnetic scattering problems

Authors: Toru Takahashi

Abstract: This paper proposes a fast time-domain boundary element method (TDBEM) to solve three-dimensional transient electromagnetic scattering problems regarding perfectly electric conductors in the classical marching-on-in-time manner. The algorithm of the fast TDBEM is a time-domain variant of the interpolation-based fast multipole method (IFMM), which is similar to the time-domain IFMM for acoustic sca… ▽ More This paper proposes a fast time-domain boundary element method (TDBEM) to solve three-dimensional transient electromagnetic scattering problems regarding perfectly electric conductors in the classical marching-on-in-time manner. The algorithm of the fast TDBEM is a time-domain variant of the interpolation-based fast multipole method (IFMM), which is similar to the time-domain IFMM for acoustic scattering problems investigated in the author's previous studies. The principle of the present IFMM is to interpolate the kernel functions of the electric and magnetic field integral equations (EFIE and MFIE, respectively) so that every kernel function is expressed in a form of separation of variables in terms of both the spatial and temporal variables. Such an expression enables to construct a fast method to evaluate the scalar and vector potentials in the EFIE and MFIE with using so-called multipole-moments and local-coefficients associated with a space-time hierarchy. As opposed to $O(N_s^2 N_t)$ of the conventional TDBEM, the computational complexity of the fast TDBEM is estimated as $O(N_s^{1+δ}N_t)$, where $N_s$ and $N_t$ stand for the spatial and temporal degrees of freedom, respectively, and $δ$ is typically $1/2$ or $1/3$. The numerical examples presented the advantages of the proposed fast TDBEM over the conventional TDBEM when solving large-scale problems. △ Less

Submitted 8 March, 2023; originally announced March 2023.

Wide-gap CdTe Strip Detectors for High-Resolution Imaging in Hard X-rays

Authors: Shunsaku Nagasawa, Takahiro Minami, Shin Watanabe, Tadayuki Takahashi

Abstract: We propose a new strip configuration for CdTe X-ray detectors, named "Wide-gap CdTe strip detector", in which the gap between adjacent strips is much wider than the width of each strip. It has been known that the observed energies of an incoming photon in adjacent strips can be utilized to achieve a position resolution finer than the strip pitch, if and only if the charge cloud induced by an incom… ▽ More We propose a new strip configuration for CdTe X-ray detectors, named "Wide-gap CdTe strip detector", in which the gap between adjacent strips is much wider than the width of each strip. It has been known that the observed energies of an incoming photon in adjacent strips can be utilized to achieve a position resolution finer than the strip pitch, if and only if the charge cloud induced by an incoming X-ray photon is split into multiple strips and their energies are accurately measured. However, with existing CdTe strip detectors, the ratio of such charge-sharing events is limited. An idea for a potential breakthrough to greatly enhance the ratio of charge-sharing events is to widen the gaps between strips on the detector. To test the concept, we developed a wide-gap CdTe strip detector, which has 64 platinum strip electrodes on the cathode side with some variations in strip pitches from 60 um (30 um strip and 30 um gap width) to 80 um (30 um strip and 50 um gap width). We evaluated the performance depending on the strip pitches by irradiating X-rays from Am-241 on the detector. The charge loss due to the wider gaps on the detector was found to be significant to the extent that the assumption that the energy of an incoming photon for a charge-sharing event was the simple sum of the energies detected in adjacent strips lead to a significant degradation in the energy resolution in the accumulated spectrum, compared with those obtained with its predecessor having standard gap-widths. We then developed a new energy-reconstruction method to compensate for the charge loss. Application of the method to the data yielded a spectrum with a comparable spectral resolution with that of the predecessor. The ratio of the charge-sharing events for 17.8 keV events was doubled from that of the predecessor, from 24.3 to 49.9 percent. △ Less

Submitted 2 March, 2023; v1 submitted 28 February, 2023; originally announced February 2023.

Comments: 10 pages, 8 figures, 2 tables. Accepted for publication in NIMA

A novel technique for the measurement of the avalanche fluctuations of a GEM stack using a gating foil

Authors: M. Kobayashi, K. Yumino, T. Ogawa, A. Shoji, Y. Aoki, K. Ikematsu, P. Gros, T. Kawaguchi, D. Arai, M. Iwamura, K. Katsuki, A. Koto, M. Yoshikai, K. Fujii, T. Fusayasu, Y. Kato, S. Kawada, T. Matsuda, T. Mizuno, J. Nakajima, S. Narita, K. Negishi, H. Qi, R. D. Settles, A. Sugiyama , et al. (4 additional authors not shown)

Abstract: We have developed a novel technique for the measurement of the size of avalanche fluctuations of gaseous detectors using a gating device (gating foil) prepared for the time projection chamber in the international linear collider experiment (ILD-TPC). In addition to the gating function, the gating foil is capable of controlling the average fraction of drift electrons detected after gas amplificatio… ▽ More We have developed a novel technique for the measurement of the size of avalanche fluctuations of gaseous detectors using a gating device (gating foil) prepared for the time projection chamber in the international linear collider experiment (ILD-TPC). In addition to the gating function, the gating foil is capable of controlling the average fraction of drift electrons detected after gas amplification. The signal charge width and shape (skewness) for electron-ion pairs created by a pulsed UV laser as a function of the transmission rate of the gating foil can be used to determine the relative variance of gas gain for single electrons. We present the measurement principle and the result obtained using a stack of gas electron multipliers (GEMs) operated in a gas mixture of Ar-CF$_4$(3%)-isobutane(2%) at atmospheric pressure. Also discussed is the influence of the avalanche fluctuations on the spatial resolution of the ILD-TPC. △ Less

Submitted 2 July, 2022; originally announced July 2022.

Comments: 39 pages including 11 figures

Journal ref: Nuclear Instruments and Methods in Physics Research A 1039 (2022) 166872

Study of Time Evolution of Thermal and Non-Thermal Emission from an M-Class Solar Flare

Authors: Shunsaku Nagasawa, Tomoko Kawate, Noriyuki Narukage, Tadayuki Takahashi, Amir Caspi, Thomas N. Woods

Abstract: We conduct a wide-band X-ray spectral analysis in the energy range of 1.5-100 keV to study the time evolution of the M7.6 class flare of 2016 July 23, with the Miniature X-ray Solar Spectrometer (MinXSS) CubeSat and the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) spacecraft. With the combination of MinXSS for soft X-rays and RHESSI for hard X-rays, a non-thermal component and thr… ▽ More We conduct a wide-band X-ray spectral analysis in the energy range of 1.5-100 keV to study the time evolution of the M7.6 class flare of 2016 July 23, with the Miniature X-ray Solar Spectrometer (MinXSS) CubeSat and the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) spacecraft. With the combination of MinXSS for soft X-rays and RHESSI for hard X-rays, a non-thermal component and three-temperature multi-thermal component -- "cool" ($T \approx$ 3 MK), "hot" ($T \approx$ 15 MK), and "super-hot" ($T \approx$ 30 MK) -- were measured simultaneously. In addition, we successfully obtained the spectral evolution of the multi-thermal and non-thermal components with a 10 s cadence, which corresponds to the Alfvén time scale in the solar corona. We find that the emission measures of the cool and hot thermal components are drastically increasing more than hundreds of times and the super-hot thermal component is gradually appearing after the peak of the non-thermal emission. We also study the microwave spectra obtained by the Nobeyama Radio Polarimeters (NoRP), and we find that there is continuous gyro-synchrotron emission from mildly relativistic non-thermal electrons. In addition, we conducted a differential emission measure (DEM) analysis by using Atmospheric Imaging Assembly (AIA) onboard the Solar Dynamics Observatory (SDO) and determine that the DEM of cool plasma increases within the flaring loop. We find that the cool and hot plasma components are associated with chromospheric evaporation. The super-hot plasma component could be explained by the thermalization of the non-thermal electrons trapped in the flaring loop. △ Less

Submitted 28 May, 2022; originally announced May 2022.

Comments: 20 pages, 12 figures, 1 tables. Accepted for publication in ApJ

Journal ref: The Astrophysical Journal, Vol. 933, Issue 2, 173 (16pp); 2022 July 10

Double-hit separation and dE/dx resolution of a time projection chamber with GEM readout

Authors: Yumi Aoki, David Attié, Ties Behnke, Alain Bellerive, Oleg Bezshyyko, Deb Bhattacharya Sankar, Purba Bhattacharya, Sudeb Bhattacharya, Yue Chang, Paul Colas, Gilles De Lentdecker, Klaus Dehmelt, Klaus Desch, Ralf Diener, Madhu Dixit, Ulrich Einhaus, Oleksiy Fedorchuk, Ivor Fleck, Keisuke Fujii, Takahiro Fusayasu, Serguei Ganjour, Philippe Gros, Peter Hayman, Katsumasa Ikematsu, Leif Jönsson , et al. (46 additional authors not shown)

Abstract: A time projection chamber (TPC) with micropattern gaseous detector (MPGD) readout is investigated as main tracking device of the International Large Detector (ILD) concept at the planned International Linear Collider (ILC). A prototype TPC equipped with a triple gas electron multiplier (GEM) readout has been built and operated in an electron test beam. The TPC was placed in a 1 T solenoidal field… ▽ More A time projection chamber (TPC) with micropattern gaseous detector (MPGD) readout is investigated as main tracking device of the International Large Detector (ILD) concept at the planned International Linear Collider (ILC). A prototype TPC equipped with a triple gas electron multiplier (GEM) readout has been built and operated in an electron test beam. The TPC was placed in a 1 T solenoidal field at the DESY II Test Beam Facility, which provides an electron beam up to 6 GeV/c. The performance of the readout modules, in particular the spatial point resolution, is determined and compared to earlier tests. New studies are presented with first results on the separation of close-by tracks and the capability of the system to measure the specific energy loss dE/dx. This is complemented by a simulation study on the optimization of the readout granularity to improve particle identification by dE/dx. △ Less

Submitted 25 November, 2022; v1 submitted 24 May, 2022; originally announced May 2022.

Comments: 29 pages, 30 figures, 6 tables. This is the Accepted Manuscript version of an article accepted for publication in Journal of Instrumentation. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at https://doi.org/10.1088/1748-0221/17/11/P11027

Report number: PUBDB-2022-02594

Journal ref: Journal of Instrumentation, Volume 17, Number 11, P11027 -, November 2022

An Impartial Perspective for Superconducting Nb3Sn coated Copper RF Cavities for Future Accelerators

Authors: E. Barzi, B. C. Barish, R. A. Rimmer, A. Valente-Feliciano, C. M. Rey, W. A. Barletta, E. Nanni, M. Nasr, M. Ross, M. Schneider, S. Tantawi, P. B. Welander, E. I. Simakov, I. O. Usov, L. Alff, N. Karabas, M. Major, J. P. Palakkal, S. Petzold, N. Pietralla, N. Schäfer, A. Kikuchi, H. Hayano, H. Ito, S. Kashiwaji , et al. (10 additional authors not shown)

Abstract: This Snowmass21 Contributed Paper encourages the Particle Physics community in fostering R&D in Superconducting Nb3Sn coated Copper RF Cavities instead of costly bulk Niobium. It describes the pressing need to devote effort in this direction, which would deliver higher gradient and higher temperature of operation and reduce the overall capital and operational costs of any future collider. It is un… ▽ More This Snowmass21 Contributed Paper encourages the Particle Physics community in fostering R&D in Superconducting Nb3Sn coated Copper RF Cavities instead of costly bulk Niobium. It describes the pressing need to devote effort in this direction, which would deliver higher gradient and higher temperature of operation and reduce the overall capital and operational costs of any future collider. It is unlikely that an ILC will be built in the next ten years with Nb as one of the main cost drivers of SRFs. This paper provides strong arguments on the benefits of using this time for R&D on producing Nb3Sn on inexpensive and thermally efficient metals such as Cu or bronze, while pursuing in parallel the novel U.S. concept of parallel-feed RF accelerator structures. A technology that synergistically uses both of these advanced tools would make an ILC or equivalent machines more affordable and more likely to be built. Such a successful enterprise would readily apply to other HEP accelerators, for instance a Muon Collider, and to accelerators beyond HEP. We present and assess current efforts in the U.S. on the novel concept of parallel-feed RF accelerator structures, and in the U.S. and abroad in producing Nb3Sn films on either Cu or bronze despite minimal funding. △ Less

Submitted 26 March, 2022; v1 submitted 17 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021

Report number: FERMILAB-CONF-22-134-TD

The International Linear Collider: Report to Snowmass 2021

Authors: Alexander Aryshev, Ties Behnke, Mikael Berggren, James Brau, Nathaniel Craig, Ayres Freitas, Frank Gaede, Spencer Gessner, Stefania Gori, Christophe Grojean, Sven Heinemeyer, Daniel Jeans, Katja Kruger, Benno List, Jenny List, Zhen Liu, Shinichiro Michizono, David W. Miller, Ian Moult, Hitoshi Murayama, Tatsuya Nakada, Emilio Nanni, Mihoko Nojiri, Hasan Padamsee, Maxim Perelstein , et al. (487 additional authors not shown)

Abstract: The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This docu… ▽ More The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This document brings the story of the ILC up to date, emphasizing its strong physics motivation, its readiness for construction, and the opportunity it presents to the US and the global particle physics community. △ Less

Submitted 16 January, 2023; v1 submitted 14 March, 2022; originally announced March 2022.

Comments: 356 pages, Large pdf file (40 MB) submitted to Snowmass 2021; v2 references to Snowmass contributions added, additional authors; v3 references added, some updates, additional authors

Report number: DESY-22-045, IFT--UAM/CSIC--22-028, KEK Preprint 2021-61, PNNL-SA-160884, SLAC-PUB-17662

A topology optimization of open acoustic waveguides based on a scattering matrix method

Authors: Kei Matsushima, Hiroshi Isakari, Toru Takahashi, Toshiro Matsumoto

Abstract: This study presents a topology optimization scheme for realizing a bound state in the continuum along an open acoustic waveguide comprising a periodic array of elastic materials. First, we formulate the periodic problem as a system of linear algebraic equations using a scattering matrix associated with a single unit structure of the waveguide. The scattering matrix is numerically constructed using… ▽ More This study presents a topology optimization scheme for realizing a bound state in the continuum along an open acoustic waveguide comprising a periodic array of elastic materials. First, we formulate the periodic problem as a system of linear algebraic equations using a scattering matrix associated with a single unit structure of the waveguide. The scattering matrix is numerically constructed using the boundary element method. Subsequently, we employ the Sakurai--Sugiura method to determine resonant frequencies and the Floquet wavenumbers by solving a nonlinear eigenvalue problem for the linear system. We design the shape and topology of the unit elastic material such that the periodic structure has a real resonant wavenumber at a given frequency by minimizing the imaginary part of the resonant wavenumber. The proposed topology optimization scheme is based on a level-set method with a novel topological derivative. We demonstrate a numerical example of the proposed topology optimization and show that it realizes a bound state in the continuum through some numerical experiments. △ Less

Submitted 7 July, 2022; v1 submitted 24 January, 2022; originally announced January 2022.

Comments: 30 pages, 13 figures

MSC Class: 49M41 ACM Class: G.1.9; G.1.6; J.2

Journal ref: Wave Motion 113C (2022) 102987

Stationary Bootstrap: A Refined Error Estimation for Equilibrium Time Series

Authors: Yoshihiko Nishikawa, Jun Takahashi, Takashi Takahashi

Abstract: In Markov-chain Monte Carlo simulations, estimating statistical errors or confidence intervals of numerically obtained values is an essential task. In this paper, we review several methods for error estimation, such as simple empirical estimation with multiple independent runs, the blocking method, and the stationary bootstrap method. We then study their performance when applied to an actual Monte… ▽ More In Markov-chain Monte Carlo simulations, estimating statistical errors or confidence intervals of numerically obtained values is an essential task. In this paper, we review several methods for error estimation, such as simple empirical estimation with multiple independent runs, the blocking method, and the stationary bootstrap method. We then study their performance when applied to an actual Monte-Carlo time series. We find that the stationary bootstrap method gives a reasonable and stable estimation for any quantity using only one single time series. In contrast, the simple estimation with few independent runs can be demonstratively erroneous. We further discuss the potential use of the stationary bootstrap method in numerical simulations. △ Less

Submitted 22 December, 2021; originally announced December 2021.

Comments: 11 pages, 6 figures

An enhancement of the fast time-domain boundary element method for the three-dimensional wave equation

Authors: Toru Takahashi, Masaki Tanigawa, Naoya Miyazawa

Abstract: Our objective is to stabilise and accelerate the time-domain boundary element method (TDBEM) for the three-dimensional wave equation. To overcome the potential time instability, we considered using the Burton--Miller-type boundary integral equation (BMBIE) instead of the ordinary boundary integral equation (OBIE), which consists of the single- and double-layer potentials. In addition, we introduce… ▽ More Our objective is to stabilise and accelerate the time-domain boundary element method (TDBEM) for the three-dimensional wave equation. To overcome the potential time instability, we considered using the Burton--Miller-type boundary integral equation (BMBIE) instead of the ordinary boundary integral equation (OBIE), which consists of the single- and double-layer potentials. In addition, we introduced a smooth temporal basis, i.e. the B-spline temporal basis of order $d$, whereas $d=1$ was used together with the OBIE in a previous study [Takahashi 2014]. Corresponding to these new techniques, we generalised the interpolation-based fast multipole method that was developed in \cite{takahashi2014}. In particular, we constructed the multipole-to-local formula (M2L) so that even for $d\ge 2$ we can maintain the computational complexity of the entire algorithm, i.e. $O(N_{\rm s}^{1+δ} N_{\rm t})$, where $N_{\rm s}$ and $N_{\rm t}$ denote the number of boundary elements and the number of time steps, respectively, and $δ$ is theoretically estimated as $1/3$ or $1/2$. The numerical examples indicated that the BMBIE is indispensable for solving the homogeneous Dirichlet problem, but the order $d$ cannot exceed 1 owing to the doubtful cancellation of significant digits when calculating the corresponding layer potentials. In regard to the homogeneous Neumann problem, the previous TDBEM based on the OBIE with $d=1$ can be unstable, whereas it was found that the BMBIE with $d=2$ can be stable and accurate. The present study will enhance the usefulness of the TDBEM for 3D scalar wave problems. △ Less

Submitted 9 November, 2021; originally announced November 2021.

Extension of the J-PARC Hadron Experimental Facility: Third White Paper

Authors: Kazuya Aoki, Hiroyuki Fujioka, Toshiyuki Gogami, Yoshimasa Hidaka, Emiko Hiyama, Ryotaro Honda, Atsushi Hosaka, Yudai Ichikawa, Masaharu Ieiri, Masahiro Isaka, Noriyoshi Ishii, Takatsugu Ishikawa, Yusuke Komatsu, Takeshi Komatsubara, GeiYoub Lim, Koji Miwa, Yuhei Morino, Tomofumi Nagae, Sho Nagao, Satoshi N. Nakamura, Hajime Nanjo, Megumi Naruki, Hidekatsu Nemura, Tadashi Nomura, Hiroyuki Noumi , et al. (18 additional authors not shown)

Abstract: The J-PARC Hadron Experimental Facility was constructed with an aim to explore the origin and evolution of matter in the universe through the experiments with intense particle beams. In the past decade, many results on particle and nuclear physics have been obtained at the present facility. To expand the physics programs to unexplored regions never achieved, the extension project of the Hadron Exp… ▽ More The J-PARC Hadron Experimental Facility was constructed with an aim to explore the origin and evolution of matter in the universe through the experiments with intense particle beams. In the past decade, many results on particle and nuclear physics have been obtained at the present facility. To expand the physics programs to unexplored regions never achieved, the extension project of the Hadron Experimental Facility has been extensively discussed. This white paper presents the physics of the extension of the Hadron Experimental Facility for resolving the issues in the fields of the strangeness nuclear physics, hadron physics, and flavor physics. △ Less

Submitted 9 October, 2021; originally announced October 2021.

Comments: 261 pages, 186 figures

Tomographic Imaging by a Si/CdTe Compton Camera for In-111 and I-131 Radionuclides

Authors: Goro Yabu, Hiroki Yoneda, Tadashi Orita, Shin'ichiro Takeda, Pietro Caradonna, Tadayuki Takahashi, Shin Watanabe, Fumiki Moriyama

Abstract: Tomographic imaging with radionuclides commonly used in nuclear medicine, such as $^{111}$In (171 and 245 keV) and $^{131}$I (364 keV), is in high demand for medical applications and small animal imaging. The Si/CdTe Compton camera with its high angular and high energy resolutions is an especially promising detector to extend the energy coverage for imaging to the range that covers gamma-ray emitt… ▽ More Tomographic imaging with radionuclides commonly used in nuclear medicine, such as $^{111}$In (171 and 245 keV) and $^{131}$I (364 keV), is in high demand for medical applications and small animal imaging. The Si/CdTe Compton camera with its high angular and high energy resolutions is an especially promising detector to extend the energy coverage for imaging to the range that covers gamma-ray emitted from these radionuclides. Here, we take the first steps towards short-distance imaging by conducting experiments using three-dimensional phantoms composed of multiple sphere-like solutions of $^{111}$In and $^{131}$I with a diameter of 2.7 mm, placed at a distance of 41 mm. Using simple back-projection methods, the positions of the sources are reproduced with a spatial resolution of 11.5 mm and 9.0 mm (FWHM) for $^{111}$In and $^{131}$I, respectively. We found that a LM-MLEM method gives a better resolution of 4.0 mm and 2.7 mm (FWHM). We resolve source positions of a tetrahedron structure with a source-to-source separation of 28 mm. These findings demonstrate that Compton Cameras have the potential of close-distance imaging of radioisotopes distributions in the energy range below 400 keV. △ Less

Submitted 19 August, 2021; originally announced August 2021.

Unveiling quasiparticle dynamics of topological insulators through Bayesian modelling

Authors: Satoru Tokuda, Seigo Souma, Kouji Segawa, Takashi Takahashi, Yoichi Ando, Takeshi Nakanishi, Takafumi Sato

Abstract: Quasiparticle - a key concept to describe interacting particles - characterizes electron-electron interaction in metals (Fermi liquid) and electron pairing in superconductors. While this concept essentially relies on the simplification of hard-to-solve many-body problem into one-particle picture and residual effects, a difficulty in disentangling many-body effects from experimental quasiparticle s… ▽ More Quasiparticle - a key concept to describe interacting particles - characterizes electron-electron interaction in metals (Fermi liquid) and electron pairing in superconductors. While this concept essentially relies on the simplification of hard-to-solve many-body problem into one-particle picture and residual effects, a difficulty in disentangling many-body effects from experimental quasiparticle signature sometimes hinders unveiling intrinsic low-energy dynamics, as highlighted by the fierce controversy on the origin of Dirac-band anomaly in graphene and dispersion kink in high-temperature superconductors. Here, we propose an approach to solve this fundamental problem - the Bayesian modelling of quasiparticles. We have chosen a topological insulator $\mathrm{TlBi(S,Se)_2}$ as a model system to formulate an inverse problem of quasiparticle spectra with semiparametric Bayesian analysis, and successfully extracted one-particle and many-body characteristics, i.e. the intrinsic energy gap and unusual lifetime in Dirac-quasiparticle bands. Our approach is widely applicable to clarify the quasiparticle dynamics of quantum materials. △ Less

Submitted 27 July, 2021; originally announced July 2021.

Journal ref: Commun Phys 4, 170 (2021)

An application of a Si/CdTe Compton camera for the polarization measurement of hard x-rays from highly charged heavy ions

Authors: Yutaka Tsuzuki, Shin Watanabe, Shimpei Oishi, Nobuyuki Nakamura, Naoki Numadate, Hirokazu Odaka, Yuusuke Uchida, Hiroki Yoneda, Tadayuki Takahashi

Abstract: The methods to measure the polarization of the x-rays from highly charged heavy ions with a significantly higher accuracy than the existing technology is needed to explore relativistic and quantum electrodynamics (QED) effects including the Breit interaction. We developed the Electron Beam Ion Trap Compton Camera (EBIT-CC), a new Compton polarimeter with pixelated multi-layer silicon and cadmium t… ▽ More The methods to measure the polarization of the x-rays from highly charged heavy ions with a significantly higher accuracy than the existing technology is needed to explore relativistic and quantum electrodynamics (QED) effects including the Breit interaction. We developed the Electron Beam Ion Trap Compton Camera (EBIT-CC), a new Compton polarimeter with pixelated multi-layer silicon and cadmium telluride counters. The EBIT-CC detects the three-dimensional position of Compton scattering and photoelectric absorption, and thus the degree of polarization of incoming x-rays can be evaluated. We attached the EBIT-CC on the Tokyo Electron Beam Ion Trap (Tokyo-EBIT) in the University of Electro-Communications. An experiment was performed to evaluate its polarimetric capability through an observation of radiative recombination x-rays emitted from highly charged krypton ions, which were generated by the Tokyo-EBIT. The Compton camera of the EBIT-CC was calibrated for the 75 keV x-rays. We developed event reconstruction and selection procedures and applied them to every registered event. As a result, we successfully obtained the polarization degree with an absolute uncertainty of 0.02. This uncertainty is small enough to probe the difference between the zero-frequency approximation and full-frequency-dependent calculation for the Breit interaction, which is expected for dielectronic recombination x-rays of highly charged heavy ions. △ Less

Submitted 29 May, 2021; originally announced May 2021.

Comments: 11 pages, 15 figures

First observation of a nuclear $s$-state of $Ξ$ hypernucleus, $^{15}_Ξ{\rm C}$

Authors: M. Yoshimoto, J. K. Ahn, B. Bassalleck, H. Ekawa, Y. Endo, M. Fujita, Y. Han, T. Hashimoto, S. H. Hayakawa, K. Hicks, K. Hoshino, S. Hoshino, S. H. Hwang, Y. Ichikawa, M. Ichikawa, K. Imai, Y. Ishikawa, H. Kanauchi, A. Kasagi, S. H. Kim, S. Kinbara, P. M. Lin, T. L. Ma, K. Miwa, A. T. Moe , et al. (24 additional authors not shown)

Abstract: Bound-systems of $Ξ^-$--$^{14}_{}{\rm N}$ are studied via $Ξ^-$ capture at rest followed by emission of a twin single-$Λ$ hypernucleus in the emulsion detectors. Two events forming extremely deep $Ξ^-$ bound states were obtained by analysis of a hybrid method in the E07 experiment at J-PARC and reanalysis of the E373 experiment at KEK-PS. The decay mode of one event was assigned as… ▽ More Bound-systems of $Ξ^-$--$^{14}_{}{\rm N}$ are studied via $Ξ^-$ capture at rest followed by emission of a twin single-$Λ$ hypernucleus in the emulsion detectors. Two events forming extremely deep $Ξ^-$ bound states were obtained by analysis of a hybrid method in the E07 experiment at J-PARC and reanalysis of the E373 experiment at KEK-PS. The decay mode of one event was assigned as $Ξ^-+^{14}_{}{\rm N}\to^{5}_Λ{\rm He}$+$^{5}_Λ{\rm He}$+$^{4}_{}{\rm He}$+n. Since there are no excited states for daughter particles, the binding energy of the $Ξ^-$ hyperon, $B_{Ξ^-}$, in $^{14}_{}{\rm N}$ nucleus was uniquely determined to be 6.27 $\pm$ 0.27 MeV. Another $Ξ^-$--$^{14}_{}{\rm N}$ system via the decay $^{9}_Λ{\rm Be}$ + $^{5}_Λ{\rm He}$ + n brings a $B_{Ξ^-}$ value, 8.00 $\pm$ 0.77 MeV or 4.96 $\pm$ 0.77 MeV, where the two possible values of $B_{Ξ^-}$ correspond to the ground and the excited states of the daughter $^{9}_Λ{\rm Be}$ nucleus, respectively. Because the $B_{Ξ^-}$ values are larger than those of the previously reported events (KISO and IBUKI), which are both interpreted as the nuclear $1p$ state of the $Ξ^-$--$^{14}_{}{\rm N}$ system, these new events give the first indication of the nuclear $1s$ state of the $Ξ$ hypernucleus, $^{15}_Ξ{\rm C}$. △ Less

Submitted 26 May, 2021; v1 submitted 15 March, 2021; originally announced March 2021.

Comments: 26 pages, 7 figures

Journal ref: PTEP 2021 (2021) 7, 073D02

A Balance for Fairness: Fair Distribution Utilising Physics in Games of Characteristic Function Form

Authors: Song-Ju Kim, Taiki Takahashi, Kazuo Sano

Abstract: In chaotic modern society, there is an increasing demand for the realization of true 'fairness'. In Greek mythology, Themis, the 'goddess of justice', has a sword in her right hand to protect society from vices, and a 'balance of judgment' in her left hand that measures good and evil. In this study, we propose a fair distribution method 'utilising physics' for the profit in games of characteristic… ▽ More In chaotic modern society, there is an increasing demand for the realization of true 'fairness'. In Greek mythology, Themis, the 'goddess of justice', has a sword in her right hand to protect society from vices, and a 'balance of judgment' in her left hand that measures good and evil. In this study, we propose a fair distribution method 'utilising physics' for the profit in games of characteristic function form. Specifically, we show that the linear programming problem for calculating 'nucleolus' can be efficiently solved by considering it as a physical system in which gravity works. In addition to being able to significantly reduce computational complexity thereby, we believe that this system could have flexibility necessary to respond to real-time changes in the parameter. △ Less

Submitted 5 February, 2021; v1 submitted 27 January, 2021; originally announced January 2021.

Comments: 13 pages, 5 figures

Data acquisition system in Run-0a for the J-PARC E16 experiment

Authors: Tomonori Takahashi, Kazuya Aoki, Sakiko Ashikaga, Wen-Chen Chang, Eitaro Hamada, Ryotaro Honda, Masaya Ichikawa, Masahiro Ikeno, Shunsuke Kajikawa, Koki Kanno, Daisuke Kawama, Takehito Kondo, Che-Sheng Lin, Chih-Hsun Lin, Yuhei Morino, Tomoki Murakami, Wataru Nakai, Satomi Nakasuga, Megumi Naruki, Yuki Obara, Kyoichiro Ozawa, Hiroyuki Sako, Susumu Sato, Hiroshi Sendai, Kazuki Suzuki , et al. (4 additional authors not shown)

Abstract: J-PARC E16 is an experiment to examine the origin of hadron mass through a systematic measurement of spectral changes of vector mesons in nuclei. The measurement of $e^{+}e^{-}$ pairs from the decay of vector mesons will provide the information of the partial restoration of the chiral symmetry in a normal nuclear density. To resolve a pulse pile-up and achieve good discrimination of $e^{\pm}$ from… ▽ More J-PARC E16 is an experiment to examine the origin of hadron mass through a systematic measurement of spectral changes of vector mesons in nuclei. The measurement of $e^{+}e^{-}$ pairs from the decay of vector mesons will provide the information of the partial restoration of the chiral symmetry in a normal nuclear density. To resolve a pulse pile-up and achieve good discrimination of $e^{\pm}$ from the background of a reaction rate of an order of 10 MHz, the data acquisition (DAQ) system uses waveform sampling chips of APV25 and DRS4. The trigger rate and data rate are expected to be 1 kHz and 130--330 MiB/s, respectively. The DAQ system for readout of APV25 and DRS4 were developed, where events were synchronized by common trigger and tag data. The first commissioning in beam, called Run-0a, was performed in June 2020 with about 1/4 of the designed setup. The DAQ worked with a trigger rate of 300 Hz in the Run-0a and the main bottleneck was a large data size of APV25. Further optimization of the DAQ system will improve the performance. △ Less

Submitted 31 October, 2020; originally announced November 2020.

Comments: IEEE Real Time 2020 Conference, 4 pages, 6 figures

Development of a Low-noise Front-end ASIC for CdTe Detectors

Authors: Tenyo Kawamura, Tadashi Orita, Shin'ichiro Takeda, Shin Watanabe, Hirokazu Ikeda, Tadayuki Takahashi

Abstract: We present our latest ASIC, which is used for the readout of Cadmium Telluride double-sided strip detectors (CdTe DSDs) and high spectroscopic imaging. It is implemented in a 0.35 um CMOS technology (X-Fab XH035), consists of 64 readout channels, and has a function that performs simultaneous AD conversion for each channel. The equivalent noise charge of 54.9 e- +/- 11.3 e- (rms) is measured withou… ▽ More We present our latest ASIC, which is used for the readout of Cadmium Telluride double-sided strip detectors (CdTe DSDs) and high spectroscopic imaging. It is implemented in a 0.35 um CMOS technology (X-Fab XH035), consists of 64 readout channels, and has a function that performs simultaneous AD conversion for each channel. The equivalent noise charge of 54.9 e- +/- 11.3 e- (rms) is measured without connecting the ASIC to any detectors. From the spectroscopy measurements using a CdTe single-sided strip detector, the energy resolution of 1.12 keV (FWHM) is obtained at 13.9 keV, and photons within the energy from 6.4 keV to 122.1 keV are detected. Based on the experimental results, we propose a new low-noise readout architecture making use of a slew-rate limited mode at the shaper followed by a peak detector circuit. △ Less

Submitted 31 August, 2020; originally announced September 2020.

Comments: 6 pages, 10 figures, accepted for publication in Nuclear Inst. and Methods in Physics Research, A

Imaging and Spectral Performance of a 60 μm Pitch CdTe Double-Sided Strip Detector

Authors: Kento Furukawa, Shunsaku Nagasawa, Lindsay Glesener, Miho Katsuragawa, Shin'ichiro Takeda, Shin Watanabe, Tadayuki Takahashi

Abstract: We have evaluated the performance of a fine pitch CdTe Double-sided Strip Detector (CdTe-DSD), which was originally developed for the focal plane detector of a hard X-ray telescope to observe the Sun. The detector has a thickness of 750 um and has 128 strip electrodes with a 60 um strip pitch orthogonally placed on both sides of the detector and covers an energy range 4 keV to 80 keV. The study of… ▽ More We have evaluated the performance of a fine pitch CdTe Double-sided Strip Detector (CdTe-DSD), which was originally developed for the focal plane detector of a hard X-ray telescope to observe the Sun. The detector has a thickness of 750 um and has 128 strip electrodes with a 60 um strip pitch orthogonally placed on both sides of the detector and covers an energy range 4 keV to 80 keV. The study of the depth of photon interaction and charge sharing effects are of importance in order to provide good spectroscopic and imaging performance. We study the tail structure observed in the spectra caused by charge trapping and develop a new method to reconstruct the spectra based on induced charge information from both anode and cathode strips. By applying this method, energy resolutions (FWHM) of 0.76 keV and 1.0 keV can be obtained at photon energies of 14 keV and 60 keV, respectively, if the energy difference between the anode and cathode is within 1 keV. Furthermore, the tail component at 60 keV is reduced, and the energy resolution of the 60 keV peak is improved from 2.4 keV to 1.5 keV (FWHM) if the energy difference is greater than 1 keV. In order to study the imaging performance, we constructed a simple imaging system using a 5 mm thick tungsten plate that has a pinhole with a diameter of 100 um. We utilize a Ba-133 radioisotope of 1 mm in diameter as a target source in combination with a 100 um slit made from 0.5 mm thickness tungsten. We imaged the Ba-133 source behind the 100 um slit using a 30 keV peak, with a 100 um pinhole placed at the center of the source-detector distance. By applying a charge sharing correction between strips, we have succeeded in obtaining a position resolution better than the strip pitch of 60 um. △ Less

Submitted 10 June, 2020; originally announced June 2020.

Comments: 7 pages, 13 figures, accepted for publication in Nuclear Inst. and Methods in Physics Research, A

Journal ref: Nuclear Inst. and Methods in Physics Research, A 978 (2020) 164378

Lattice protein design using Bayesian learning

Authors: Tomoei Takahashi, George Chikenji, Kei Tokita

Abstract: Protein design is the inverse approach of the three-dimensional (3D) structure prediction for elucidating the relationship between the 3D structures and amino acid sequences. In general, the computation of the protein design involves a double loop: a loop for amino acid sequence changes and a loop for an exhaustive conformational search for each amino acid sequence. Herein, we propose a novel stat… ▽ More Protein design is the inverse approach of the three-dimensional (3D) structure prediction for elucidating the relationship between the 3D structures and amino acid sequences. In general, the computation of the protein design involves a double loop: a loop for amino acid sequence changes and a loop for an exhaustive conformational search for each amino acid sequence. Herein, we propose a novel statistical mechanical design method using Bayesian learning, which can design lattice proteins without the exhaustive conformational search. We consider a thermodynamic hypothesis of the evolution of proteins and apply it to the prior distribution of amino acid sequences. Furthermore, we take the water effect into account in view of the grand canonical picture. As a result, on applying the 2D lattice hydrophobic-polar (HP) model, our design method successfully finds an amino acid sequence for which the target conformation has a unique ground state. However, the performance was not as good for the 3D lattice HP models compared to the 2D models. The performance of the 3D model improves on using a 20-letter lattice proteins. Furthermore, we find a strong linearity between the chemical potential of water and the number of surface residues, thereby revealing the relationship between protein structure and the effect of water molecules. The advantage of our method is that it greatly reduces computation time, because it does not require long calculations for the partition function corresponding to an exhaustive conformational search. As our method uses a general form of Bayesian learning and statistical mechanics and is not limited to lattice proteins, the results presented here elucidate some heuristics used successfully in previous protein design methods. △ Less

Submitted 14 June, 2021; v1 submitted 14 March, 2020; originally announced March 2020.

Comments: 12 pages, 10 figures

Journal ref: Phys. Rev. E 104, 014404 (2021)

EMPHATIC: A proposed experiment to measure hadron scattering and productioncross sections for improved neutrino flux predictions

Authors: T. Akaishi, L. Aliaga-Soplin, H. Asano, A. Aurisano, M. Barbi, L. Bellantoni, S. Bhadra, W-C. Chang, L. Fields, A. Fiorentini, M. Friend, T. Fukuda, D. Harris, M. Hartz, R. Honda, T. Ishikawa, B. Jamieson, E. Kearns, N. Kolev, M. Komatsu, Y. Komatsu, A. Konaka, M. Kordosky, K. Lang, P. Lebrun , et al. (25 additional authors not shown)

Abstract: Hadron scattering and production uncertainties are a limiting systematic on accelerator and at-mospheric neutrino flux predictions. New hadron measurements are necessary for neutrino fluxpredictions with well-understood and reduced uncertainties. We propose a new compact experimentto measure hadron scattering and production cross sections at beam energies that are inaccessibleto currently operatin… ▽ More Hadron scattering and production uncertainties are a limiting systematic on accelerator and at-mospheric neutrino flux predictions. New hadron measurements are necessary for neutrino fluxpredictions with well-understood and reduced uncertainties. We propose a new compact experimentto measure hadron scattering and production cross sections at beam energies that are inaccessibleto currently operating experiments. These measurements can reduce the current 10% neutrino fluxuncertainties by an approximate factor of two. △ Less

Submitted 18 December, 2019; originally announced December 2019.

Report number: FERMILAB-PUB-19-625-ND

Probing entanglement in Compton interactions

Authors: Peter Caradonna, David Reutens, Tadayuki Takahashi, Shin'ichiro Takeda, Viktor Vegh

Abstract: This theoretical research aims to examine areas of the Compton cross section of entangled annihilation photons for the purpose of testing for possible break down of theory, which could have consequences for predicted optimal capabilities of Compton PET systems.We provide maps of the cross section for entangled annihilation photons for experimental verification.We introduce a strategy to derive cro… ▽ More This theoretical research aims to examine areas of the Compton cross section of entangled annihilation photons for the purpose of testing for possible break down of theory, which could have consequences for predicted optimal capabilities of Compton PET systems.We provide maps of the cross section for entangled annihilation photons for experimental verification.We introduce a strategy to derive cross sections in a relatively straight forward manner for the Compton scattering of a hypothetical separable, mixed and entangled states. To understand the effect that entanglement has on the cross section for annihilation photons, we derive the cross section so that it is expressed in terms of the cross section of a hypothetical separable state and of a hypothetical forbidden maximally entangled state.We find lobe-like structures in the cross section which are regions where entanglement has the greatest effect.We also find that mixed states do not reproduce the cross section for annihilation photons, contrary to a recent investigation which reported otherwise.We review the motivation and method of the most precise Compton scattering experiment for annihilation photons, in order to resolve conflicting reports regarding the extent to which the cross section itself has been experimentally verified. △ Less

Submitted 12 October, 2019; originally announced October 2019.

Comments: 16 pages, 6 figures

Journal ref: https://iopscience.iop.org/article/10.1088/2399-6528/ab45db 2019

Simple complex amplitude encoding of a phase-only hologram using binarized amplitude

Authors: Tomoyoshi Shimobaba, Takayuki Takahashi, Yota Yamamoto, Ikuo Hoshi, Atsushi Shiraki, Takashi Kakue, Tomoyoshi Ito

Abstract: For this work, we introduced the use of binary amplitude for our proposed complex amplitude encoding of a phase-only hologram. By principle, a complex amplitude in a hologram plane can be represented by the amplitude and its phase. However, a phase-only hologram contains only phase information of the complex amplitude, which results in degradation of reconstruction quality from the hologram. In ou… ▽ More For this work, we introduced the use of binary amplitude for our proposed complex amplitude encoding of a phase-only hologram. By principle, a complex amplitude in a hologram plane can be represented by the amplitude and its phase. However, a phase-only hologram contains only phase information of the complex amplitude, which results in degradation of reconstruction quality from the hologram. In our method, by approximating the amplitude in the hologram plane using a binary amplitude, we can finally record the complex amplitude of an original light in the phase-only hologram. We validated the effectiveness of our method with two examples, hologram reconstruction and generation of Hermite-Gaussian beams. △ Less

Submitted 17 September, 2019; originally announced September 2019.

Parallelization of the inverse fast multipole method with an application to boundary element method

Authors: Toru Takahashi, Chao Chen, Eric Darve

Abstract: We present an algorithm to parallelize the inverse fast multipole method (IFMM), which is an approximate direct solver for dense linear systems. The parallel scheme is based on a greedy coloring algorithm, where two nodes in the hierarchy with the same color are separated by at least $σ$ nodes. We proved that when $σ\ge 6$, the workload associated with one color is embarrassingly parallel. However… ▽ More We present an algorithm to parallelize the inverse fast multipole method (IFMM), which is an approximate direct solver for dense linear systems. The parallel scheme is based on a greedy coloring algorithm, where two nodes in the hierarchy with the same color are separated by at least $σ$ nodes. We proved that when $σ\ge 6$, the workload associated with one color is embarrassingly parallel. However, the number of nodes in a group (color) may be small when $σ= 6$. Therefore, we also explored $σ= 3$, where a small fraction of the algorithm needs to be serialized, and the overall parallel efficiency was improved. We implemented the parallel IFMM using OpenMP for shared-memory machines. Successively, we applied it to a fast-multipole accelerated boundary element method (FMBEM) as a preconditioner, and compared its efficiency with (a) the original IFMM parallelized by linking a multi-threaded linear algebra library and (b) the commonly used parallel block-diagonal preconditioner. Our results showed that our parallel IFMM achieved at most $4\times$ and $11\times$ speedups over the reference method (a) and (b), respectively, in realistic examples involving more than one million variables. △ Less

Submitted 25 May, 2019; originally announced May 2019.

Selection Rules for Optical Vortex Absorption by Landau-quantized Electrons

Authors: Hirohisa T. Takahashi, Igor Proskurin, Jun-ichiro Kishine

Abstract: An optical vortex beam carries orbital angular momentum $\ell$ in addition to spin angular momentum $σ$. We demonstrate that a Landau-quantized two dimensional electron system absorbs the optical vortex beam through modified selection rules, reflecting two kinds of angular momenta. The lowest Landau level electron absorbs the optical vortex beams with $σ=1$ (positive helicity) and $\ell=0$ or… ▽ More An optical vortex beam carries orbital angular momentum $\ell$ in addition to spin angular momentum $σ$. We demonstrate that a Landau-quantized two dimensional electron system absorbs the optical vortex beam through modified selection rules, reflecting two kinds of angular momenta. The lowest Landau level electron absorbs the optical vortex beams with $σ=1$ (positive helicity) and $\ell=0$ or $σ=-1$ (negative helicity) and $\ell=2$ in the electric dipole transition. The induced electric currents survive only along the edge of the sample, due to cancellation of the bulk currents. Thus, the magnetization can be induced by only the edge current. It is shown that the induced orbital magnetization disappears when the dark ring of the beam coincides with the disk edge. This scheme may provide a helicity-dependent absorption using the optical vortex beam. △ Less

Submitted 6 June, 2019; v1 submitted 5 April, 2019; originally announced April 2019.

Comments: 24 pages, 5 figures; submitted to J. Phys. Soc. Jpn.; using jpsj3.cls; Some errors were corrected

Measurement of the electron transmission rate of the gating foil for the TPC of the ILC experiment

Authors: M. Kobayashi, T. Ogawa, A. Shoji, Y. Aoki, K. Ikematsu, P. Gros, T. Kawaguchi, D. Arai, M. Iwamura, K. Katsuki, A. Koto, M. Yoshikai, K. Fujii, T. Fusayasu, Y. Kato, S. Kawada, T. Matsuda, S. Narita, K. Negishi, H. Qi, R. D. Settles, A. Sugiyama, T. Takahashi, J. Tian, T. Watanabe , et al. (1 additional authors not shown)

Abstract: We have developed a gating foil for the time projection chamber envisaged as a central tracker for the international linear collider experiment. It has a structure similar to the Gas Electron Multiplier (GEM) with a higher optical aperture ratio and functions as an ion gate without gas amplification. The transmission rate for electrons was measured in a counting mode for a wide range of the voltag… ▽ More We have developed a gating foil for the time projection chamber envisaged as a central tracker for the international linear collider experiment. It has a structure similar to the Gas Electron Multiplier (GEM) with a higher optical aperture ratio and functions as an ion gate without gas amplification. The transmission rate for electrons was measured in a counting mode for a wide range of the voltages applied across the foil using an $^{55}$Fe source and a laser in the absence of a magnetic field. The blocking power of the foil against positive ions was estimated from the electron transmissions. △ Less

Submitted 1 May, 2019; v1 submitted 5 March, 2019; originally announced March 2019.

Comments: 25 pages containing 14 figures and 1 table

Journal ref: Nucl. Instrum. Methods Phys. Res. A 918 (2019) 41-53

Light-by-Light Scattering in a Photon-Photon Collider

Authors: T. Takahashi, G. An, Y. Chen, W. Chou, Y. Huang, W. Liu, W. Lu, J. Lv, G. Pei, S. Pei, C. P. Shen, B. Sun, C. Zhang, C. Zhang

Abstract: We studied the feasibility of observing light-by-light scattering in a photon-photon collider based on an existing accelerator complex and a commercially available laser system. We investigated the statistical significance of the signal over the QED backgrounds through a Monte Carlo simulation with a detector model. The study showed that light-by-light scattering can be observed with a statistical… ▽ More We studied the feasibility of observing light-by-light scattering in a photon-photon collider based on an existing accelerator complex and a commercially available laser system. We investigated the statistical significance of the signal over the QED backgrounds through a Monte Carlo simulation with a detector model. The study showed that light-by-light scattering can be observed with a statistical significance of 8 to 10 sigma in a year of operation, depending on the operating conditions. △ Less

Submitted 18 October, 2018; v1 submitted 29 June, 2018; originally announced July 2018.

Comments: 7 pages, 9 figures

Trigger Merging Module for the J-PARC E16 Experiment

Authors: M. Ichikawa, T. N. Takahashi, K. Aoki, S. Ashikaga, E. Hamada, R. Honda, Y. Igarashi, M. Ikeno, D. Kawama, M. Naruki, K. Ozawa, H. Sendai, K. N. Suzuki, M. Tanaka, T. Uchida, S. Yokkaichi

Abstract: An experiment to measure an invariant mass of φ mesons in nuclear medium is planned as the J-PARC E16 experiment. A trigger merging module (TRG-MRG) has been developed to detect leading-edges from 256 channels of discriminator-output signals and transmit those serialized hit data to trigger decision module with four optical links. The result of the test shows enough performance of the TRG-MRG as 1… ▽ More An experiment to measure an invariant mass of φ mesons in nuclear medium is planned as the J-PARC E16 experiment. A trigger merging module (TRG-MRG) has been developed to detect leading-edges from 256 channels of discriminator-output signals and transmit those serialized hit data to trigger decision module with four optical links. The result of the test shows enough performance of the TRG-MRG as 1 ns TDC and data multiplexer with four 6.25 Gbps transceivers. △ Less

Submitted 24 June, 2018; originally announced June 2018.

Comments: 6 pages, 17 figures, conference record for the 21st IEEE Real Time Conference

Imaging and spectral performance of CdTe double-sided strip detectors for the Hard X-ray Imager onboard ASTRO-H

Authors: Kouichi Hagino, Hirokazu Odaka, Goro Sato, Shin Watanabe, Shin'ichiro Takeda, Motohide Kokubun, Taro Fukuyama, Shinya Saito, Tamotsu Sato, Yuto Ichinohe, Tadayuki Takahashi, Toshio Nakano, Kazuhiro Nakazawa, Kazuo Makishima, Hiroyasu Tajima, Takaaki Tanaka, Kazunori Ishibashi, Takuya Miyazawa, Michito Sakai, Karin Sakanobe, Hiroyoshi Kato, Shunya Takizawa, Kentaro Uesugi

Abstract: The imaging and spectral performance of CdTe double-sided strip detectors (CdTe-DSDs) was evaluated for the ASTRO-H mission. The charcterized CdTe-DSDs have a strip pitch of 0.25 mm, an imaging area of 3.2 cm$\times$3.2 cm and a thickness of 0.75 mm. The detector was successfully operated at a temperature of $-20^\circ$C and with an applied bias voltage of 250 V. By using two-strip events as well… ▽ More The imaging and spectral performance of CdTe double-sided strip detectors (CdTe-DSDs) was evaluated for the ASTRO-H mission. The charcterized CdTe-DSDs have a strip pitch of 0.25 mm, an imaging area of 3.2 cm$\times$3.2 cm and a thickness of 0.75 mm. The detector was successfully operated at a temperature of $-20^\circ$C and with an applied bias voltage of 250 V. By using two-strip events as well as one-strip events for the event reconstruction, a good energy resolution of 2.0 keV at 59.5 keV and a sub-strip spatial resolution was achieved. The hard X-ray and gamma-ray response of CdTe-DSDs is complex due to the properties of CdTe and the small pixel effect. Therefore, one of the issues to investigate is the response of the CdTe-DSD. In order to investigate the spatial dependence of the detector response, we performed fine beam scan experiments at SPring-8, a synchrotron radiation facility. From these experiments, the depth structure of the electric field was determined as well as properties of carriers in the detector and successfully reproduced the experimental data with simulated spectra. △ Less

Submitted 20 May, 2018; originally announced May 2018.

Comments: 11 pages, 11 figures, published in proceedings for SPIE Astronomical Telescopes + Instrumentation in 2012

Matter creation via gamma-gamma collider driving by 10 PW laser pulses

Authors: Jinqing Yu, Haiyang Lu, T. Takahashi, Ronghao Hu, Zheng Gong, Wenjun Ma, Yongsheng Huang, Xueqing Yan

Abstract: The nature of matter creation is one of the most basic processes in the universe. According to the quantum electrodynamics theory, matters can be created from pure light through the Breit Wheeler (BW) process. The multi-photon BW process has been demonstrated in 1997 at the SLAC, yet the two-photon BW process has never been observed in the laboratory. Interest has been aroused to investigate this… ▽ More The nature of matter creation is one of the most basic processes in the universe. According to the quantum electrodynamics theory, matters can be created from pure light through the Breit Wheeler (BW) process. The multi-photon BW process has been demonstrated in 1997 at the SLAC, yet the two-photon BW process has never been observed in the laboratory. Interest has been aroused to investigate this process with lasers due to the developments of the laser technology and the laser based electron accelerators. The laser based proposals may be achieved with NIF and ELI, provided that the signal-to-noise (S/N) ratio of BW is high enough for observation. Here, we present a clean channel to observe the matter creation via a gamma-gamma collider by using the collimated γ-ray pulses generated in the interaction between 10-PW lasers and narrow tubes. More than $3.2\times 10^8$ positrons with a divergence angle of $\sim 7$ degrees can be created in a single pulse, and the S/N is higher than 2000. This scheme, which provides the first realization of gamma-gamma collider in the laboratory, would pave the developments of quantum electrodynamics, high-energy physics and laboratory astrophysics. △ Less

Submitted 12 May, 2018; originally announced May 2018.

Journal ref: Phys. Rev. Lett. 122, 014802 (2019)

A statistical mechanics approach to de-biasing and uncertainty estimation in LASSO for random measurements

Authors: Takashi Takahashi, Yoshiyuki Kabashima

Abstract: In high-dimensional statistical inference in which the number of parameters to be estimated is larger than that of the holding data, regularized linear estimation techniques are widely used. These techniques have, however, some drawbacks. First, estimators are biased in the sense that their absolute values are shrunk toward zero because of the regularization effect. Second, their statistical prope… ▽ More In high-dimensional statistical inference in which the number of parameters to be estimated is larger than that of the holding data, regularized linear estimation techniques are widely used. These techniques have, however, some drawbacks. First, estimators are biased in the sense that their absolute values are shrunk toward zero because of the regularization effect. Second, their statistical properties are difficult to characterize as they are given as numerical solutions to certain optimization problems. In this manuscript, we tackle such problems concerning LASSO, which is a widely used method for sparse linear estimation, when the measurement matrix is regarded as a sample from a rotationally invariant ensemble. We develop a new computationally feasible scheme to construct a de-biased estimator with a confidence interval and conduct hypothesis testing for the null hypothesis that a certain parameter vanishes. It is numerically confirmed that the proposed method successfully de-biases the LASSO estimator and constructs confidence intervals and p-values by experiments for noisy linear measurements. △ Less

Submitted 27 March, 2018; originally announced March 2018.

Comments: 22 pages, 9 figures

Development of Si-CMOS hybrid detectors towards electron tracking based Compton imaging in semiconductor detectors

Authors: Hiroki Yoneda, Shinya Saito, Shin Watanabe, Hirokazu Ikeda, Tadayuki Takahashi

Abstract: Electron tracking based Compton imaging is a key technique to improve the sensitivity of Compton cameras by measuring the initial direction of recoiled electrons. To realize this technique in semiconductor Compton cameras, we propose a new detector concept, Si-CMOS hybrid detector. It is a Si detector bump-bonded to a CMOS readout integrated circuit to obtain electron trajectory images. To acquire… ▽ More Electron tracking based Compton imaging is a key technique to improve the sensitivity of Compton cameras by measuring the initial direction of recoiled electrons. To realize this technique in semiconductor Compton cameras, we propose a new detector concept, Si-CMOS hybrid detector. It is a Si detector bump-bonded to a CMOS readout integrated circuit to obtain electron trajectory images. To acquire the energy and the event timing, signals from N-side are also read out in this concept. By using an ASIC for the N-side readout, the timing resolution of few us is achieved. In this paper, we present the results of two prototypes with 20 um pitch pixels. The images of the recoiled electron trajectories are obtained with them successfully. The energy resolutions (FWHM) are 4.1 keV (CMOS) and 1.4 keV (N-side) at 59.5 keV. In addition, we confirmed that the initial direction of the electron is determined using the reconstruction algorithm based on the graph theory approach. These results show that Si-CMOS hybrid detectors can be used for electron tracking based Compton imaging. △ Less

Submitted 5 December, 2017; originally announced December 2017.

Comments: 5 pages, 8 figures, NDIP 2017 Proceedings, accepted to Nuc. Inst. Methods A

A compact imaging system with a CdTe double-sided strip detector for non-destructive analysis using negative muonic X-rays

Authors: Miho Katsuragawa, Motonobu Tampo, Koji Hamada, Atsushi Harayama, Yasuhiro Miyake, Sayuri Oshita, Goro Sato, Tadayuki Takahashi, Shin'ichiro Takeda, Shin Watanabe, Goro Yabu

Abstract: A CdTe double-sided strip detector (CdTe-DSD) is an ideal device for imaging and spectroscopic measure- ments in the hard X-ray range above 10 keV. Recent development enables us to realize an imager with a detection area of ~10 cm${^2}$. An energy resolution of 1-2 keV (FWHM) and a position resolution of a few hundred μm are available from the detector. This type of imager has been long awaited fo… ▽ More A CdTe double-sided strip detector (CdTe-DSD) is an ideal device for imaging and spectroscopic measure- ments in the hard X-ray range above 10 keV. Recent development enables us to realize an imager with a detection area of ~10 cm${^2}$. An energy resolution of 1-2 keV (FWHM) and a position resolution of a few hundred μm are available from the detector. This type of imager has been long awaited for non-destructive elemental analysis, especially by using negative muons, because energies of characteristic X-rays from muonic atoms are about 200 time higher than those from normal atoms. With the method that uses negative muons, hard X-ray information gives the spatial distribution of elements in samples at a certain depth defined by the initial momentum of the muon beam. In order to study three-dimensional imaging capability of the method, we have developed a compact imaging system based on CdTe-DSD and a φ3 mm pinhole collimator as the first prototype. We conducted experiments with samples which consist of layers of Al, BN and LiF irradiated by negative muon beams in MUSE/J-PARC and successfully reconstruct hard X-ray images of muonic X-rays from B, N and F at various depths. △ Less

Submitted 16 November, 2017; originally announced November 2017.

High-speed X-ray imaging spectroscopy system with Zynq SoC for solar observations

Authors: Shin-nosuke Ishikawa, Tadayuki Takahashi, Shin Watanabe, Noriyuki Narukage, Satoshi Miyazaki, Tadashi Orita, Shin'ichiro Takeda, Masaharu Nomahi, Iwao Fujishiro, Fumio Hodoshima

Abstract: We have developed a system combining a back-illuminated Complementary-Metal-Oxide-Semiconductor (CMOS) imaging sensor and Xilinx Zynq System-on-Chip (SoC) device for a soft X-ray (0.5-10 keV) imaging spectroscopy observation of the Sun to investigate the dynamics of the solar corona. Because typical timescales of energy release phenomena in the corona span a few minutes at most, we aim to obtain t… ▽ More We have developed a system combining a back-illuminated Complementary-Metal-Oxide-Semiconductor (CMOS) imaging sensor and Xilinx Zynq System-on-Chip (SoC) device for a soft X-ray (0.5-10 keV) imaging spectroscopy observation of the Sun to investigate the dynamics of the solar corona. Because typical timescales of energy release phenomena in the corona span a few minutes at most, we aim to obtain the corresponding energy spectra and derive the physical parameters, i.e., temperature and emission measure, every few tens of seconds or less for future solar X-ray observations. An X-ray photon-counting technique, with a frame rate of a few hundred frames per second or more, can achieve such results. We used the Zynq SoC device to achieve the requirements. Zynq contains an ARM processor core, which is also known as the Processing System (PS) part, and a Programmable Logic (PL) part in a single chip. We use the PL and PS to control the sensor and seamless recording of data to a storage system, respectively. We aim to use the system for the third flight of the Focusing Optics Solar X-ray Imager (FOXSI-3) sounding rocket experiment for the first photon-counting X-ray imaging and spectroscopy of the Sun. △ Less

Submitted 12 November, 2017; originally announced November 2017.

Comments: 4 pages, 3 figures, accepted for publication in Nuclear Instruments and Methods in Physics Research Section A

Optically guided atom interferometer tuned to magic wavelength

Authors: Tomoya Akatsuka, Tadahiro Takahashi, Hidetoshi Katori

Abstract: We demonstrate an atom interferometer operating on the $^1S_0-{}^3P_0$ clock transition of $^{87}$Sr atoms in a "magic" optical guide, where the light shift perturbations of the guiding potential are canceled. As a proof-of-principle demonstration, a Mach-Zehnder interferometer is set horizontally to map the acceleration introduced by the focused optical guide. This magic guide interferometer on t… ▽ More We demonstrate an atom interferometer operating on the $^1S_0-{}^3P_0$ clock transition of $^{87}$Sr atoms in a "magic" optical guide, where the light shift perturbations of the guiding potential are canceled. As a proof-of-principle demonstration, a Mach-Zehnder interferometer is set horizontally to map the acceleration introduced by the focused optical guide. This magic guide interferometer on the clock transition is applicable to atomic elements where magic wavelengths can be found. Possible applications of the magic guide interferometer, including a hollow-core fiber interferometer and gradiometer, are discussed. △ Less

Submitted 24 October, 2017; originally announced October 2017.

Comments: 5 pages, 4 figures

Journal ref: Appl. Phys. Express 10, 112501 (2017)

Computational ghost imaging using deep learning

Authors: Tomoyoshi Shimobaba, Yutaka Endo, Takashi Nishitsuji, Takayuki Takahashi, Yuki Nagahama, Satoki Hasegawa, Marie Sano, Ryuji Hirayama, Takashi Kakue, Atsushi Shiraki, Tomoyoshi Ito

Abstract: Computational ghost imaging (CGI) is a single-pixel imaging technique that exploits the correlation between known random patterns and the measured intensity of light transmitted (or reflected) by an object. Although CGI can obtain two- or three- dimensional images with a single or a few bucket detectors, the quality of the reconstructed images is reduced by noise due to the reconstruction of image… ▽ More Computational ghost imaging (CGI) is a single-pixel imaging technique that exploits the correlation between known random patterns and the measured intensity of light transmitted (or reflected) by an object. Although CGI can obtain two- or three- dimensional images with a single or a few bucket detectors, the quality of the reconstructed images is reduced by noise due to the reconstruction of images from random patterns. In this study, we improve the quality of CGI images using deep learning. A deep neural network is used to automatically learn the features of noise-contaminated CGI images. After training, the network is able to predict low-noise images from new noise-contaminated CGI images. △ Less

Submitted 18 October, 2017; originally announced October 2017.

Fast, large-scale hologram calculation in wavelet domain

Authors: Tomoyoshi Shimobaba, Kyoji Matsushima, Takayuki Takahashi, Yuki Nagahama, Satoki Hasegawa, Marie Sano, Ryuji Hirayama, Takashi Kakue, Tomoyoshi Ito

Abstract: We propose a large-scale hologram calculation using WAvelet ShrinkAge-Based superpositIon (WASABI), a wavelet transform-based algorithm. An image-type hologram calculated using the WASABI method is printed on a glass substrate with the resolution of $65,536 \times 65,536$ pixels and a pixel pitch of $1 μ$m. The hologram calculation time amounts to approximately 354 s on a commercial CPU, which is… ▽ More We propose a large-scale hologram calculation using WAvelet ShrinkAge-Based superpositIon (WASABI), a wavelet transform-based algorithm. An image-type hologram calculated using the WASABI method is printed on a glass substrate with the resolution of $65,536 \times 65,536$ pixels and a pixel pitch of $1 μ$m. The hologram calculation time amounts to approximately 354 s on a commercial CPU, which is approximately 30 times faster than conventional methods. △ Less

Submitted 13 August, 2017; originally announced August 2017.

Deep-learning-based data page classification for holographic memory

Authors: Tomoyoshi Shimobaba, Naoki Kuwata, Mizuha Homma, Takayuki Takahashi, Yuki Nagahama, Marie Sano, Satoki Hasegawa, Ryuji Hirayama, Takashi Kakue, Atsushi Shiraki, Naoki Takada, Tomoyoshi Ito

Abstract: We propose a deep-learning-based classification of data pages used in holographic memory. We numerically investigated the classification performance of a conventional multi-layer perceptron (MLP) and a deep neural network, under the condition that reconstructed page data are contaminated by some noise and are randomly laterally shifted. The MLP was found to have a classification accuracy of 91.58%… ▽ More We propose a deep-learning-based classification of data pages used in holographic memory. We numerically investigated the classification performance of a conventional multi-layer perceptron (MLP) and a deep neural network, under the condition that reconstructed page data are contaminated by some noise and are randomly laterally shifted. The MLP was found to have a classification accuracy of 91.58%, whereas the deep neural network was able to classify data pages at an accuracy of 99.98%. The accuracy of the deep neural network is two orders of magnitude better than the MLP. △ Less

Submitted 2 July, 2017; originally announced July 2017.

Development of optical resonant cavities for laser-Compton scattering

Authors: T. Akagi, S. Araki, Y. Honda, A. Kosuge, T. Omori, H. Shimizu, N. Terunuma, J. Urakawa, T. Takahashi, R. Tanaka, Y. Uesugi, H. Yoshitama, Y. Hosaka, K. Sakaue, M. Washio

Abstract: We have been developing optical resonant cavities for laser-Compton scattering experiment at the Accelerator Test Facility in KEK. The main subject of the R&D is to increase laser pulse energy by coherently accumulating the pulses in an optical resonant cavity. We report previous results, current status and future prospects, including a new idea of an optical resonant cavity. We have been developing optical resonant cavities for laser-Compton scattering experiment at the Accelerator Test Facility in KEK. The main subject of the R&D is to increase laser pulse energy by coherently accumulating the pulses in an optical resonant cavity. We report previous results, current status and future prospects, including a new idea of an optical resonant cavity. △ Less

Submitted 15 March, 2017; originally announced March 2017.

Comments: 8 pages, 5 figures. Proceedings of the 7th International Conference "Charged & Neutral Particles Channeling Phenomena Channeling 2016"

Sheath-Accumulating Propagation of Interplanetary Coronal Mass Ejection

Authors: Takuya Takahashi, Kazunari Shibata

Abstract: Fast interplanetary coronal mass ejections (interplanetary CMEs, or ICMEs) are the drivers of strongest space weather storms such as solar energetic particle events and geomagnetic storms. The connection between space weather impacting solar wind disturbances associated with fast ICMEs at Earth and the characteristics of causative energetic CMEs observed near the Sun is a key question in the study… ▽ More Fast interplanetary coronal mass ejections (interplanetary CMEs, or ICMEs) are the drivers of strongest space weather storms such as solar energetic particle events and geomagnetic storms. The connection between space weather impacting solar wind disturbances associated with fast ICMEs at Earth and the characteristics of causative energetic CMEs observed near the Sun is a key question in the study of space weather storms as well as in the development of practical space weather prediction. Such shock-driving fast ICMEs usually expand at supersonic speed during the propagation, resulting in the continuous accumulation of shocked sheath plasma ahead. In this paper, we propose the "sheath-accumulating propagation" (SAP) model that describe the coevolution of the interplanetary sheath and decelerating ICME ejecta by taking into account the process of upstream solar wind plasma accumulation within the sheath region. Based on the SAP model, we discussed (1) ICME deceleration characteristics, (2) the fundamental condition for fast ICME at Earth, (3) thickness of interplanetary sheath, (4) arrival time prediction and (5) the super-intense geomagnetic storms associated with huge solar flares. We quantitatively show that not only speed but also mass of the CME are crucial in discussing the above five points. The similarities and differences among the SAP model, the drag-based model and the`snow-plough' model proposed by \citet{tappin2006} are also discussed. △ Less

Submitted 21 February, 2017; originally announced February 2017.

Comments: 20 pages, 5 figures, accepted for publication in ApJL

Autoencoder-based holographic image restoration

Authors: Tomoyoshi Shimobaba, Yutaka Endo, Ryuji Hirayama, Yuki Nagahama, Takayuki Takahashi, Takashi Nishitsuji, Takashi Kakue, Atsushi Shiraki, Naoki Takada, Nobuyuki Masuda, Tomoyoshi Ito

Abstract: We propose a holographic image restoration method using an autoencoder, which is an artificial neural network. Because holographic reconstructed images are often contaminated by direct light, conjugate light, and speckle noise, the discrimination of reconstructed images may be difficult. In this paper, we demonstrate the restoration of reconstructed images from holograms that record page data in h… ▽ More We propose a holographic image restoration method using an autoencoder, which is an artificial neural network. Because holographic reconstructed images are often contaminated by direct light, conjugate light, and speckle noise, the discrimination of reconstructed images may be difficult. In this paper, we demonstrate the restoration of reconstructed images from holograms that record page data in holographic memory and QR codes by using the proposed method. △ Less

Submitted 12 December, 2016; originally announced December 2016.

Mode-locked pulse oscillation of a self-resonating enhancement optical cavity

Authors: Yuji Hosaka, Yosuke Honda, Atsushi Kosuge, Tsunehiko Omori, Kazuyuki Sakaue, Tohru Takahashi, Yuuki Uesugi, Junji Urakawa, Masakazu Washio

Abstract: A power enhancement optical cavity is a compelling means of realizing a pulsed laser with a high peak power and high repetition frequency, which is not feasible using a simple amplifier scheme. However, a precise feedback system is necessary for maintaining the narrow resonance condition of the optical cavity; this has become a major technical issue in developing such cavities. We have developed a… ▽ More A power enhancement optical cavity is a compelling means of realizing a pulsed laser with a high peak power and high repetition frequency, which is not feasible using a simple amplifier scheme. However, a precise feedback system is necessary for maintaining the narrow resonance condition of the optical cavity; this has become a major technical issue in developing such cavities. We have developed a new approach that does not require any active feedback system, by placing the cavity in the outer loop of a laser amplifier. We report on the first demonstration of a mode-locked pulse oscillation using the new system. △ Less

Submitted 28 May, 2019; v1 submitted 10 October, 2016; originally announced October 2016.

Comments: 4 pages, 4 figures

A novel technique for the measurement of the avalanche fluctuation of gaseous detectors

Authors: Makoto Kobayashi, Tomohisa Ogawa, Tomohiko Kawaguchi, Keisuke Fujii, Takahiro Fusayasu, Katsumasa Ikematsu, Yukihiro Kato, Shin-ichi Kawada, Takeshi Matsuda, Ronald Dean Settles, Akira Sugiyama, Tohru Takahashi, Junping Tian, Takashi Watanabe, Ryo Yonamine

Abstract: We have developed a novel technique for the measurement of the avalanche fluctuation of gaseous detectors using a UV laser. The technique is simple and requires a short data-taking time of about ten minutes. Furthermore, it is applicable for relatively low gas gains. Our experimental setup as well as the measurement principle, and the results obtained with a stack of Gas Electron Multipliers (GEMs… ▽ More We have developed a novel technique for the measurement of the avalanche fluctuation of gaseous detectors using a UV laser. The technique is simple and requires a short data-taking time of about ten minutes. Furthermore, it is applicable for relatively low gas gains. Our experimental setup as well as the measurement principle, and the results obtained with a stack of Gas Electron Multipliers (GEMs) operated in several gas mixtures are presented. △ Less

Submitted 21 March, 2023; v1 submitted 3 July, 2016; originally announced July 2016.

Comments: A supplemental material (Addendum to be published in Nucl. Instrum. Methods Phys. Res. A) was added at the end of the manuscript. 8 pages, including 7 figures

Journal ref: Nuclear Instruments and Methods in Physics Research A 845 (2017) 236-240