Showing 1–11 of 11 results for author: Swanson, C

Flexible Stellarator Physics Facility

Authors: F. I. Parra, S. -G. Baek, M. Churchill, D. R. Demers, B. Dudson, N. M. Ferraro, B. Geiger, S. Gerhardt, K. C. Hammond, S. Hudson, R. Jorge, E. Kolemen, D. M. Kriete, S. T. A. Kumar, M. Landreman, C. Lowe, D. A. Maurer, F. Nespoli, N. Pablant, M. J. Pueschel, A. Punjabi, J. A. Schwartz, C. P. S. Swanson, A. M. Wright

Abstract: We propose to build a Flexible Stellarator Physics Facility to explore promising regions of the vast parameter space of disruption-free stellarator solutions for Fusion Pilot Plants (FPPs). We propose to build a Flexible Stellarator Physics Facility to explore promising regions of the vast parameter space of disruption-free stellarator solutions for Fusion Pilot Plants (FPPs). △ Less

Submitted 4 July, 2024; originally announced July 2024.

Comments: White paper submitted to FESAC subcommittee on Facilities, 8 pages

Analysis and mitigation of pulse-pile-up tail artifacts in warm-plasma pulse-height X-ray spectra

Authors: Taosif Ahsan, Charles Swanson, Christopher Galea, Sangeeta Vinoth, Tony Qian, Tal Rubin, Samuel Cohen

Abstract: Pulse pile-up in pulse-height energy analyzers increases when the incident rate of pulses increases relative to the inverse of the dead time per pulse of the detection system. Changes in the observed energy distributions with incident rate and detector-electronics-formed pulse shape then occur. We focus on weak high energy tails in X-ray spectra, important for measurements on partially ionized, wa… ▽ More Pulse pile-up in pulse-height energy analyzers increases when the incident rate of pulses increases relative to the inverse of the dead time per pulse of the detection system. Changes in the observed energy distributions with incident rate and detector-electronics-formed pulse shape then occur. We focus on weak high energy tails in X-ray spectra, important for measurements on partially ionized, warm, pure-hydrogen plasma. A first-principles two-photon pulse-pile-up model is derived specific to trapezoidal-shaped pulses; quantitative agreement is found between the measurements and the model predictions. The modeling is then used to diagnose pulse-pile-up tail artifacts and mitigate them in relatively low count-rate spectra. △ Less

Submitted 4 December, 2022; originally announced December 2022.

Comments: 8 pages, 12 figures, preprint for Plasmas MDPI journal

Lessons Learned from the Two Largest Galaxy Morphological Classification Catalogues built by Convolutional Neural Networks

Authors: Ting-Yun Cheng, H. Domínguez Sánchez, J. Vega-Ferrero, C. J. Conselice, M. Siudek, A. Aragón-Salamanca, M. Bernardi, R. Cooke, L. Ferreira, M. Huertas-Company, J. Krywult, A. Palmese, A. Pieres, A. A. Plazas Malagón, A. Carnero Rosell, D. Gruen, D. Thomas, D. Bacon, D. Brooks, D. J. James, D. L. Hollowood, D. Friedel, E. Suchyta, E. Sanchez, F. Menanteau , et al. (32 additional authors not shown)

Abstract: We compare the two largest galaxy morphology catalogues, which separate early and late type galaxies at intermediate redshift. The two catalogues were built by applying supervised deep learning (convolutional neural networks, CNNs) to the Dark Energy Survey data down to a magnitude limit of $\sim$21 mag. The methodologies used for the construction of the catalogues include differences such as the… ▽ More We compare the two largest galaxy morphology catalogues, which separate early and late type galaxies at intermediate redshift. The two catalogues were built by applying supervised deep learning (convolutional neural networks, CNNs) to the Dark Energy Survey data down to a magnitude limit of $\sim$21 mag. The methodologies used for the construction of the catalogues include differences such as the cutout sizes, the labels used for training, and the input to the CNN - monochromatic images versus $gri$-band normalized images. In addition, one catalogue is trained using bright galaxies observed with DES ($i<18$), while the other is trained with bright galaxies ($r<17.5$) and `emulated' galaxies up to $r$-band magnitude $22.5$. Despite the different approaches, the agreement between the two catalogues is excellent up to $i<19$, demonstrating that CNN predictions are reliable for samples at least one magnitude fainter than the training sample limit. It also shows that morphological classifications based on monochromatic images are comparable to those based on $gri$-band images, at least in the bright regime. At fainter magnitudes, $i>19$, the overall agreement is good ($\sim$95\%), but is mostly driven by the large spiral fraction in the two catalogues. In contrast, the agreement within the elliptical population is not as good, especially at faint magnitudes. By studying the mismatched cases we are able to identify lenticular galaxies (at least up to $i<19$), which are difficult to distinguish using standard classification approaches. The synergy of both catalogues provides an unique opportunity to select a population of unusual galaxies. △ Less

Submitted 14 September, 2022; originally announced September 2022.

Comments: 17 pages, 14 figures (1 appendix for galaxy examples including 3 figures)

Validation and results of an approximate model for the stress of a Tokamak toroidal field coil at the inboard midplane

Authors: C. P. S. Swanson, S. Kahn, C. Rana, P. H. Titus, A. W. Brooks, W. Guttenfelder, Y. Zhai, T. G. Brown, J. E. Menard

Abstract: We present the verification, validation, and results of an approximate, analytic model for the radial profile of the stress, strain, and displacement within the toroidal field (TF) coil of a Tokamak at the inner midplane, where stress management is of the most concern. The model is designed to have high execution speed yet capture the essential physics, suitable for scoping studies, rapid evaluati… ▽ More We present the verification, validation, and results of an approximate, analytic model for the radial profile of the stress, strain, and displacement within the toroidal field (TF) coil of a Tokamak at the inner midplane, where stress management is of the most concern. The model is designed to have high execution speed yet capture the essential physics, suitable for scoping studies, rapid evaluation of designs, and in the inner loop of an optimizer. It is implemented in the PROCESS fusion reactor systems code. The model solves a many-layer axisymmetric extended plane strain problem. It includes linear elastic deformation, Poisson effects, transverse-isotropic materials properties, radial Lorentz force profiles, and axial tension applied to layer subsets. The model does not include out-of-plane forces from poloidal field coils. We benchmark the model against 2D and 3D Finite Element Analyses (FEA) using Ansys and COMSOL. We find the Tresca stress accuracy of the model to be within 10\% of the FEA result. We show that this model allows PROCESS to optimize a fusion pilot plant, subject to the TF coil winding pack and coil case yield constraints. This model sets an upper limit on the magnetic field strength at the coil surface of $29$ Tesla for steel TF coil cases, with the practical limit being significantly below this. △ Less

Submitted 21 September, 2022; v1 submitted 29 June, 2022; originally announced June 2022.

Plane strain optimization of conductor and structure grading in the inner leg of a Tokamak toroidal field coil

Authors: Charles PS Swanson

Abstract: I present the results of the analytic plane strain optimization of the structure and conductor grading in the inner leg of a Tokamak toroidal field coil. The coil is assumed to be made of regions of soft conductor inside a stiff grid of conduit. Calculus of variations is used to determine the optimal profile of this structure. The optimal solution is found to be two-layered. An outer layer is buck… ▽ More I present the results of the analytic plane strain optimization of the structure and conductor grading in the inner leg of a Tokamak toroidal field coil. The coil is assumed to be made of regions of soft conductor inside a stiff grid of conduit. Calculus of variations is used to determine the optimal profile of this structure. The optimal solution is found to be two-layered. An outer layer is bucked only, not wedged, and the structure fraction is graded so that all structure is at a uniform stress. An inner layer is an advanced bucking cylinder, similar to a Florida Bitter plate, whose radial stiffness is tuned so that its azimuthal stress is uniform. Such an advanced bucking cylinder would require advanced manufacturing to fabricate. These results should be seen an upper limits rather than achievable performance. Concepts that arise from this optimization, such as selectively softening layers of the bucking cylinder by drilling or cutting, may be of use to real designs in a less-optimized form. △ Less

Submitted 10 October, 2022; v1 submitted 9 June, 2022; originally announced June 2022.

Electron heating in 2-D: combining Fermi-Ulam acceleration and magnetic-moment non-adiabaticity in a mirror-configuration plasma

Authors: C. P. S. Swanson, S. A. Cohen, C. A. Galea

Abstract: We analyze a new mechanism for the creation and confinement of energetic electrons in a mirror-configuration plasma. A Fermi-Ulam-type process, driven by end-localized coherent electrostatic oscillations, provides axial acceleration while a natural non-adiabaticity of μ provides phase decorrelation and energy isotropization. This novel 2-D combination causes the electron energy distribution functi… ▽ More We analyze a new mechanism for the creation and confinement of energetic electrons in a mirror-configuration plasma. A Fermi-Ulam-type process, driven by end-localized coherent electrostatic oscillations, provides axial acceleration while a natural non-adiabaticity of μ provides phase decorrelation and energy isotropization. This novel 2-D combination causes the electron energy distribution function, calculated with a diffusive-loss model, to assume a Maxwellian shape with the μ non-adiabaticity reducing loss-cone escape and annulling the absolute-barrier energy-limiting Chirikov criterion of lower dimensional models. The theoretical predictions are compared with data from an experiment. △ Less

Submitted 27 April, 2022; originally announced April 2022.

Comments: 9 pages, 5 figures

The effect of rigid electron rotation on the Grad-Shafranov equilibria of a class of FRC devices

Authors: C. P. S. Swanson, S. A. Cohen

Abstract: Rigid electron rotation of a fully penetrated Rotamak-FRC produces a pressure flux function that is more peaked than the Solov'ev flux function. This paper explores the implications of this peaked pressure flux function, including the isothermal case, which appear when the temperature profile is broader than the density profile, creating both benefits and challenges to a Rotamak-FRC based fusion r… ▽ More Rigid electron rotation of a fully penetrated Rotamak-FRC produces a pressure flux function that is more peaked than the Solov'ev flux function. This paper explores the implications of this peaked pressure flux function, including the isothermal case, which appear when the temperature profile is broader than the density profile, creating both benefits and challenges to a Rotamak-FRC based fusion reactor. In this regime, the density distribution becomes very peaked, enhancing the fusion power. The separatrix has a tendency to become oblate, which can be mitigated by flux conserving current loops. Plasma extends outside the separatrix, notably in the open field line region. This model does not apply to very kinetic FRCs or FRCs in which there are significant ion flows, but it may have some applicability to their outer layers. △ Less

Submitted 19 March, 2021; originally announced March 2021.

Spontaneous multi-keV electron generation from Fermi acceleration and magnetic moment non-adiabaticity

Authors: C. Swanson, S. A. Cohen

Abstract: X-ray emission shows the existence of multi-keV electrons in low-temperature, low-power, capacitively-coupled RF-heated magnetic-mirror plasmas that also contain a warm (300 eV) minority electron population. Though these warm electrons are initially passing particles, we suggest that collisionless scattering - mu non-conservation in the static vacuum field - is responsible for a minority of them t… ▽ More X-ray emission shows the existence of multi-keV electrons in low-temperature, low-power, capacitively-coupled RF-heated magnetic-mirror plasmas that also contain a warm (300 eV) minority electron population. Though these warm electrons are initially passing particles, we suggest that collisionless scattering - mu non-conservation in the static vacuum field - is responsible for a minority of them to persist in the mirror cell for thousands of transits during which time a fraction are energized to a characteristic temperature of 3 keV, with some electrons reaching energies above 30 keV. A heuristic model of the heating by a Fermi-acceleration-like mechanism is presented, with mu non-conservation in the static vacuum field as an essential feature. △ Less

Submitted 31 January, 2019; v1 submitted 30 January, 2019; originally announced January 2019.

Comments: 6 pages, 7 figures

Using Poisson-regularized inversion of Bremsstrahlung emission to extract full EEDFs from x-ray pulse-height detector data

Authors: C. Swanson, P. Jandovitz, S. A. Cohen

Abstract: We measured Electron Energy Distribution Functions (EEDFs) from below 200 eV to over 8 keV and spanning five orders-of-magnitude in intensity, produced in a low-power, RF-heated, tandem mirror discharge in the PFRC-II apparatus. The EEDF was obtained from the x-ray energy distribution function (XEDF) using a novel Poisson-regularized spectrum inversion algorithm applied to pulse-height spectra tha… ▽ More We measured Electron Energy Distribution Functions (EEDFs) from below 200 eV to over 8 keV and spanning five orders-of-magnitude in intensity, produced in a low-power, RF-heated, tandem mirror discharge in the PFRC-II apparatus. The EEDF was obtained from the x-ray energy distribution function (XEDF) using a novel Poisson-regularized spectrum inversion algorithm applied to pulse-height spectra that included both Bremsstrahlung and line emissions. The XEDF was measured using a specially calibrated Amptek Silicon Drift Detector (SDD) pulse-height system with 125 eV FWHM at 5.9 keV. △ Less

Submitted 14 December, 2017; originally announced December 2017.

Modeling of reduced secondary electron emission yield from a foam or fuzz surface

Authors: Charles Swanson, Igor D. Kaganovich

Abstract: Complex structures on a material surface can significantly reduce the total secondary electron emission yield from that surface. A foam or fuzz is a solid surface above which is placed a layer of isotropically aligned whiskers. Primary electrons that penetrate into this layer produce secondary electrons that become trapped and not escape into the bulk plasma. In this manner the secondary electron… ▽ More Complex structures on a material surface can significantly reduce the total secondary electron emission yield from that surface. A foam or fuzz is a solid surface above which is placed a layer of isotropically aligned whiskers. Primary electrons that penetrate into this layer produce secondary electrons that become trapped and not escape into the bulk plasma. In this manner the secondary electron yield (SEY) may be reduced. We developed an analytic model and conducted numerical simulations of secondary electron emission from a foam to determine the extent of SEY reduction. We find that the relevant condition for SEY minimization is $\bar{u} \equiv AD/2 >>1 $, where $D$ is the volume fill fraction and $A$ is the aspect ratio of the whisker layer, the ratio of the thickness of the layer to the radius of the fibers. We find that foam can not reduce the SEY from a surface to less than 0.3 of its flat value. △ Less

Submitted 4 October, 2017; originally announced October 2017.

Modeling of Reduced Effective Secondary Electron Emission Yield from a Velvet Surface

Authors: Charles Swanson, Igor D. Kaganovich

Abstract: Complex structures on a material surface can significantly reduce total secondary electron emission from that surface. A velvet is a surface that consists of an array of vertically standing whiskers. The reduction occurs due to the capture of low-energy, true secondary electrons emitted at the bottom of the structure and on the sides of the velvet whiskers. We performed numerical simulations and d… ▽ More Complex structures on a material surface can significantly reduce total secondary electron emission from that surface. A velvet is a surface that consists of an array of vertically standing whiskers. The reduction occurs due to the capture of low-energy, true secondary electrons emitted at the bottom of the structure and on the sides of the velvet whiskers. We performed numerical simulations and developed an approximate analytical model that calculates the net secondary electron emission yield from a velvet surface as a function of the velvet whisker length and packing density, and the angle of incidence of primary electrons. We found that to suppress secondary electrons, the following condition on dimensionless parameters must be met: π/2 DA tan θ >> 1 where θ is the angle of incidence of the primary electron from the normal, D is the fraction of surface area taken up by the velvet whisker bases, and A is the aspect ratio, A {\equiv} h/r, the ratio of height to radius of the velvet whiskers. We find that velvets available today can reduce the secondary electron yield by 90% from the value of a flat surface. The values of optimal velvet whisker packing density that maximally suppresses secondary electron emission yield are determined as a function of velvet aspect ratio and electron angle of incidence. △ Less

Submitted 3 October, 2016; v1 submitted 15 July, 2016; originally announced July 2016.

Comments: 10 pages. Revisions added as per reviewers