-
Super-resolution imaging of nanoscale inhomogeneities in hBN-covered and encapsulated few-layer graphene
Authors:
Lina Jäckering,
Konstantin G. Wirth,
Lukas Conrads,
Jonas B. Profe,
Alexander Rothstein,
Hristiyana Kyoseva,
Kenji Watanabe,
Takashi Taniguchi,
Dante M. Kennes,
Christoph Stampfer,
Lutz Waldecker,
Thomas Taubner
Abstract:
Encapsulating few-layer graphene (FLG) in hexagonal boron nitride (hBN) can cause nanoscale inhomogeneities in the FLG, including changes in stacking domains and topographic defects. Due to the diffraction limit, characterizing these inhomogeneities is challenging. Recently, the visualization of stacking domains in encapsulated four-layer graphene (4LG) has been demonstrated with phonon polariton…
▽ More
Encapsulating few-layer graphene (FLG) in hexagonal boron nitride (hBN) can cause nanoscale inhomogeneities in the FLG, including changes in stacking domains and topographic defects. Due to the diffraction limit, characterizing these inhomogeneities is challenging. Recently, the visualization of stacking domains in encapsulated four-layer graphene (4LG) has been demonstrated with phonon polariton (PhP)-assisted near-field imaging. However, the underlying coupling mechanism and ability to image subdiffractional-sized inhomogeneities remain unknown. Here, we retrieve direct replicas and magnified images of subdiffractional-sized inhomogeneities in hBN-covered trilayer graphene (TLG) and encapsulated 4LG, enabled by the hyperlensing effect. This hyperlensing effect is mediated by hBN's hyperbolic PhP that couple to the FLG's plasmon polaritons. Using near-field microscopy, we identify the coupling by determining the polariton dispersion in hBN-covered TLG to be stacking-dependent. Our work demonstrates super-resolution and magnified imaging of inhomogeneities, paving the way for the realization of homogeneous encapsulated FLG transport samples to study correlated physics.
△ Less
Submitted 8 July, 2024; v1 submitted 5 July, 2024;
originally announced July 2024.
-
Collaborative smartphone experiments for large audiences with phyphox
Authors:
Sebastian Staacks,
Dominik Dorsel,
Simon Hütz,
Frank Stallmach,
Tobias Splith,
Heidrun Heinke,
Christoph Stampfer
Abstract:
We present methods to implement collaborative experimentation with smartphone sensors for larger audiences as typically found at Universities. These methods are based on the app "phyphox", which is being developed by the authors, and encompass simple data collection via web forms as well as a new network interface for "phyphox", allowing to collect real-time experiment data from an audience on-sit…
▽ More
We present methods to implement collaborative experimentation with smartphone sensors for larger audiences as typically found at Universities. These methods are based on the app "phyphox", which is being developed by the authors, and encompass simple data collection via web forms as well as a new network interface for "phyphox", allowing to collect real-time experiment data from an audience on-site or easy data submission for remote participants. Examples are given with practical considerations derived from first implementations of this method in a lecture hall with 350 undergraduate students as well as a global experiment to determine the Earth's axial tilt with smartphones.
△ Less
Submitted 14 June, 2022;
originally announced June 2022.
-
Experimental observation of ABCB stacked tetralayer graphene
Authors:
Konstantin G. Wirth,
Jonas B. Profe,
Alexander Rothstein,
Hristiyana Kyoseva,
Dario Siebenkotten,
Lukas Conrads,
Lennart Klebl,
Ammon Fischer,
Bernd Beschoten,
Christoph Stampfer,
Dante M. Kennes,
Lutz Waldecker,
Thomas Taubner
Abstract:
In tetralayer graphene, three inequivalent layer stackings should exist, however, only rhombohedral (ABCA) and Bernal (ABAB) stacking have so far been observed. The three stacking sequences differ in their electronic structure, with the elusive third stacking (ABCB) being unique as it is predicted to exhibit an intrinsic bandgap as well as locally flat bands around the K points. Here, we use scatt…
▽ More
In tetralayer graphene, three inequivalent layer stackings should exist, however, only rhombohedral (ABCA) and Bernal (ABAB) stacking have so far been observed. The three stacking sequences differ in their electronic structure, with the elusive third stacking (ABCB) being unique as it is predicted to exhibit an intrinsic bandgap as well as locally flat bands around the K points. Here, we use scattering-type scanning near-field optical microscopy and confocal Raman microscopy to identify and characterize domains of ABCB stacked tetralayer graphene. We differentiate between the three stacking sequences by addressing characteristic interband contributions in the optical conductivity between 0.28 and 0.56 eV with amplitude and phase-resolved near-field nano-spectroscopy. By normalizing adjacent flakes to each other, we achieve good agreement between theory and experiment, allowing for the unambiguous assignment of ABCB domains in tetralayer graphene. These results establish near-field spectroscopy at the interband transitions as a semi-quantitative tool, enabling the recognition of ABCB domains in tetralyer graphene flakes and therefore, providing a basis to study correlation physics of this exciting phase.
△ Less
Submitted 15 September, 2022; v1 submitted 15 March, 2022;
originally announced March 2022.
-
Using a Smartphone pressure sensor as Pitot tube speedometer
Authors:
Dominik Dorsel,
Sebastian Staacks,
Heidrun Heinke,
Christoph Stampfer
Abstract:
In this article, an experiment to measure air velocity with the barometer of a smartphone is presented utilizing the concept of a Pitot tube. For the experiment, the app phyphox is used which has a set of useful features for performing smartphone-based experiments 9,10 . Both the data analysis tools included in the app phyphox and the remote access function to smartphones in experimental setups ar…
▽ More
In this article, an experiment to measure air velocity with the barometer of a smartphone is presented utilizing the concept of a Pitot tube. For the experiment, the app phyphox is used which has a set of useful features for performing smartphone-based experiments 9,10 . Both the data analysis tools included in the app phyphox and the remote access function to smartphones in experimental setups are used in the presented experiment. This experiment is also an example for designing customized experiments within phyphox which can be realized by any user via a web-based editor 9 . In addition, it is shown how an external Bluetooth pressure sensor can be used to extend an experiment, which is used here to measure the speed of a vehicle. Such an integration of external Bluetooth Low Energy sensors into smartphone experiments became available with phyphox version 1.1.0.
△ Less
Submitted 20 January, 2022;
originally announced January 2022.
-
Charge-induced artifacts in non-local spin transport measurements: How to prevent spurious voltage signals
Authors:
F. Volmer,
T. Bisswanger,
A. Schmidt,
C. Stampfer,
B. Beschoten
Abstract:
To conduct spin-sensitive transport measurements, a non-local device geometry is often used to avoid spurious voltages that are caused by the flow of charges. However, in the vast majority of reported non-local spin valve, Hanle spin precession, or spin Hall measurements background signals have been observed that are not related to spins. We discuss seven different types of these charge-induced si…
▽ More
To conduct spin-sensitive transport measurements, a non-local device geometry is often used to avoid spurious voltages that are caused by the flow of charges. However, in the vast majority of reported non-local spin valve, Hanle spin precession, or spin Hall measurements background signals have been observed that are not related to spins. We discuss seven different types of these charge-induced signals and explain how these artifacts can result in erroneous or misleading conclusions when falsely attributed to spin transport. The charge-driven signals can be divided into two groups: Signals that are inherent to the device structure and/or the measurement setup and signals that depend on a common-mode voltage. We designed and built a voltage-controlled current source that significantly diminishes all spurious voltage signals of the latter group in both DC and AC measurements by creating a virtual ground within the non-local detection circuit. This is especially important for lock-in-based measurement techniques, where a common-mode voltage can create a phase-shifted, frequency-dependent signal with an amplitude several orders of magnitude larger than the actual spin signal. Measurements performed on graphene-based non-local spin valve devices demonstrate how all spurious voltage signals that are caused by a common-mode voltage can be completely suppressed by such a current source.
△ Less
Submitted 16 May, 2022; v1 submitted 3 December, 2021;
originally announced December 2021.
-
2D Materials for Future Heterogeneous Electronics
Authors:
Max C. Lemme,
Deji Akinwande,
Cedric Huyghebaert,
Christoph Stampfer
Abstract:
Graphene and two-dimensional materials (2DM) remain an active field of research in science and engineering over 15 years after the first reports of 2DM. The vast amount of available data and the high performance of device demonstrators leave little doubt about the potential of 2DM for applications in electronics, photonics and sensing. So where are the integrated chips and enabled products? We try…
▽ More
Graphene and two-dimensional materials (2DM) remain an active field of research in science and engineering over 15 years after the first reports of 2DM. The vast amount of available data and the high performance of device demonstrators leave little doubt about the potential of 2DM for applications in electronics, photonics and sensing. So where are the integrated chips and enabled products? We try to answer this by summarizing the main challenges and opportunities that have thus far prevented 2DM applications.
△ Less
Submitted 21 March, 2022; v1 submitted 15 October, 2021;
originally announced October 2021.
-
Hot-Carrier Cooling in High-Quality Graphene is Intrinsically Limited by Optical Phonons
Authors:
Eva A. A. Pogna,
Xiaoyu Jia,
Alessandro Principi,
Alexander Block,
Luca Banszerus,
Jincan Zhang,
Xiaoting Liu,
Thibault Sohier,
Stiven Forti,
Karuppasamy Soundarapandian,
Bernat Terrés,
Jake D. Mehew,
Chiara Trovatello,
Camilla Coletti,
Frank H. L. Koppens,
Mischa Bonn,
Niek van Hulst,
Matthieu J. Verstraete,
Hailin Peng,
Zhongfan Liu,
Christoph Stampfer,
Giulio Cerullo,
Klaas-Jan Tielrooij
Abstract:
Many promising optoelectronic devices, such as broadband photodetectors, nonlinear frequency converters, and building blocks for data communication systems, exploit photoexcited charge carriers in graphene. For these systems, it is essential to understand, and eventually control, the cooling dynamics of the photoinduced hot-carrier distribution. There is, however, still an active debate on the dif…
▽ More
Many promising optoelectronic devices, such as broadband photodetectors, nonlinear frequency converters, and building blocks for data communication systems, exploit photoexcited charge carriers in graphene. For these systems, it is essential to understand, and eventually control, the cooling dynamics of the photoinduced hot-carrier distribution. There is, however, still an active debate on the different mechanisms that contribute to hot-carrier cooling. In particular, the intrinsic cooling mechanism that ultimately limits the cooling dynamics remains an open question. Here, we address this question by studying two technologically relevant systems, consisting of high-quality graphene with a mobility >10,000 cm$^2$V$^{-1}$s$^{-1}$ and environments that do not efficiently take up electronic heat from graphene: WSe$_2$-encapsulated graphene and suspended graphene. We study the cooling dynamics of these two high-quality graphene systems using ultrafast pump-probe spectroscopy at room temperature. Cooling via disorder-assisted acoustic phonon scattering and out-of-plane heat transfer to the environment is relatively inefficient in these systems, predicting a cooling time of tens of picoseconds. However, we observe much faster cooling, on a timescale of a few picoseconds. We attribute this to an intrinsic cooling mechanism, where carriers in the hot-carrier distribution with enough kinetic energy emit optical phonons. During phonon emission, the electronic system continuously re-thermalizes, re-creating carriers with enough energy to emit optical phonons. We develop an analytical model that explains the observed dynamics, where cooling is eventually limited by optical-to-acoustic phonon coupling. These fundamental insights into the intrinsic cooling mechanism of hot carriers in graphene will play a key role in guiding the development of graphene-based optoelectronic devices.
△ Less
Submitted 5 March, 2021;
originally announced March 2021.
-
Radially polarized light beams from spin-forbidden dark excitons and trions in monolayer WSe$_2$
Authors:
Sven Borghardt,
Jens Sonntag,
Jhih-Sian Tu,
Takashi Taniguchi,
Kenji Watanabe,
Bernd Beschoten,
Christoph Stampfer,
Beata Ewa Kardynal
Abstract:
The rich optical properties of transition metal dichalcogenide monolayers (TMD-MLs) render these materials promising candidates for the design of new optoelectronic devices. Despite the large number of excitonic complexes in TMD-MLs, the main focus has been put on optically bright neutral excitons. Spin-forbidden dark excitonic complexes have been addressed for basic science purposes, but not for…
▽ More
The rich optical properties of transition metal dichalcogenide monolayers (TMD-MLs) render these materials promising candidates for the design of new optoelectronic devices. Despite the large number of excitonic complexes in TMD-MLs, the main focus has been put on optically bright neutral excitons. Spin-forbidden dark excitonic complexes have been addressed for basic science purposes, but not for applications. We report on spin-forbidden dark excitonic complexes in ML WSe$_2$ as an ideal system for the facile generation of radially polarized light beams. Furthermore, the spatially resolved polarization of photoluminescence beams can be exploited for basic research on excitons in two-dimensional materials.
△ Less
Submitted 22 January, 2020;
originally announced January 2020.
-
Does carrier velocity saturation help to enhance fmax in graphene field-effect transistors?
Authors:
Pedro Carlos Feijoo,
Francisco Pasadas,
Marlene Bonmann,
Muhammad Asad,
Xinxin Yang,
Andrey Generalov,
Andrei Vorobiev,
Luca Banszerus,
Christoph Stampfer,
Martin Otto,
Daniel Neumaier,
Jan Stake,
David Jiménez
Abstract:
It has been argued that current saturation in graphene field-effect transistors (GFETs) is needed to get the highest possible maximum oscillation frequency (fmax). This paper numerically investigates whether velocity saturation can help to get better current saturation and if that correlates with enhanced fmax. For such a purpose, we used a drift-diffusion simulator that includes several factors t…
▽ More
It has been argued that current saturation in graphene field-effect transistors (GFETs) is needed to get the highest possible maximum oscillation frequency (fmax). This paper numerically investigates whether velocity saturation can help to get better current saturation and if that correlates with enhanced fmax. For such a purpose, we used a drift-diffusion simulator that includes several factors that influence output conductance, especially at short channel lengths and-or large drain bias: short-channel electrostatics, saturation velocity, graphene-dielectric interface traps, and self-heating effects. As a testbed for our investigation, we analyzed fabricated GFETs with high extrinsin cutoff frequency fT,x (34 GHz) and fmax (37 GHz). Our simulations allow for a microscopic (local) analysis of the channel parameteres such as carrier concentration, drift and saturation velocities. For biases far away from the Dirac voltage, where the channel behaves as unipolar, we confirmed that the higher is the drift velocity, as close as possible to the saturation velocity, the greater fmax is. However, the largest fmax is recorded at biases near the crossover between unipolar and bipolar behavior, where it does not hold that the highest drift velocity maximizes fmax. In fact, the position and magnitude of the largest fmax depend on the complex interplay between the carrier concentration and total velocity which, in turn, are impacted by the self-heating. Importantly, this effect was found to severely limit radio-frequency performance, reducing the maximum fmax from around 60 to 40 GHz.
△ Less
Submitted 18 October, 2019;
originally announced October 2019.
-
Integrated impedance bridge for absolute capacitance measurements at cryogenic temperatures and finite magnetic fields
Authors:
G. J. Verbiest,
H. Janssen,
D. Xu,
X. Ge,
M. Goldsche,
J. Sonntag,
T. Khodkov,
L. Banszerus,
N. von den Driesch,
D. Buca,
K. Watanabe,
T. Taniguchi,
C. Stampfer
Abstract:
We developed an impedance bridge that operates at cryogenic temperatures (down to 60 mK) and in perpendicular magnetic fields up to at least 12 T. This is achieved by mounting a GaAs HEMT amplifier perpendicular to a printed circuit board containing the device under test and thereby parallel to the magnetic field. The measured amplitude and phase of the output signal allows for the separation of t…
▽ More
We developed an impedance bridge that operates at cryogenic temperatures (down to 60 mK) and in perpendicular magnetic fields up to at least 12 T. This is achieved by mounting a GaAs HEMT amplifier perpendicular to a printed circuit board containing the device under test and thereby parallel to the magnetic field. The measured amplitude and phase of the output signal allows for the separation of the total impedance into an absolute capacitance and a resistance. Through a detailed noise characterization, we find that the best resolution is obtained when operating the HEMT amplifier at the highest gain. We obtained a resolution in the absolute capacitance of 6.4~aF$/\sqrt{\textrm{Hz}}$ at 77 K on a comb-drive actuator, while maintaining a small excitation amplitude of 15~$k_\text{B} T/e$. We show the magnetic field functionality of our impedance bridge by measuring the quantum Hall plateaus of a top-gated hBN/graphene/hBN heterostructure at 60~mK with a probe signal of 12.8~$k_\text{B} T/e$.
△ Less
Submitted 27 June, 2019; v1 submitted 17 January, 2019;
originally announced January 2019.
-
High quality factor graphene-based 2D heterostructure mechanical resonator
Authors:
M. Will,
M. Hamer,
M. Müller,
A. Noury,
P. Weber,
A. Bachtold,
R. V. Gorbachev,
C. Stampfer,
J. Güttinger
Abstract:
Ultralight mechanical resonators based on low-dimensional materials are well suited as exceptional transducers of minuscule forces or mass changes. However, the low dimensionality also provides a challenge to minimize resistive losses and heating. Here, we report on a novel approach that aims to combine different 2D materials to tackle this challenge. We fabricated a heterostructure mechanical res…
▽ More
Ultralight mechanical resonators based on low-dimensional materials are well suited as exceptional transducers of minuscule forces or mass changes. However, the low dimensionality also provides a challenge to minimize resistive losses and heating. Here, we report on a novel approach that aims to combine different 2D materials to tackle this challenge. We fabricated a heterostructure mechanical resonator consisting of few layers of niobium diselenide (NbSe$_2$) encapsulated by two graphene sheets. The hybrid membrane shows high quality factors up to 245'000 at low temperatures, comparable to the best few-layer graphene mechanical resonators. In contrast to few-layer graphene resonators, the device shows reduced electrical losses attributed to the lower resistivity of the NbSe$_2$ layer. The peculiar low temperature dependence of the intrinsic quality factor points to dissipation over two-level systems which in turn relax over the electronic system. Our high sensitivity readout is enabled by coupling the membrane to a superconducting cavity which allows for the integration of the hybrid mechanical resonator as a sensitive and low loss transducer in future quantum circuits.
△ Less
Submitted 17 September, 2018;
originally announced September 2018.
-
Simple time-of-flight measurement of the speed of sound using smartphones
Authors:
Sebastian Staacks,
Simon Hütz,
Heidrun Heinke,
Christoph Stampfer
Abstract:
We propose an easy experiment that allows to determine the speed of sound through a simple time-of-flight measurement using two smartphones
We propose an easy experiment that allows to determine the speed of sound through a simple time-of-flight measurement using two smartphones
△ Less
Submitted 17 April, 2018;
originally announced April 2018.
-
Advanced tools for smartphone-based experiments: phyphox
Authors:
Sebastian Staacks,
Simon Hütz,
Heidrun Heinke,
Christoph Stampfer
Abstract:
The sensors in modern smartphones are a promising and cost-effective tool for experimentation in physics education, but many experiments face practical problems. Often the phone is inaccessible during the experiment and the data usually needs to be analyzed subsequently on a computer. We address both problems by introducing a new app, called "phyphox", which is specifically designed for utilizing…
▽ More
The sensors in modern smartphones are a promising and cost-effective tool for experimentation in physics education, but many experiments face practical problems. Often the phone is inaccessible during the experiment and the data usually needs to be analyzed subsequently on a computer. We address both problems by introducing a new app, called "phyphox", which is specifically designed for utilizing experiments in physics teaching. The app is free and designed to offer the same set of features on Android and iOS.
△ Less
Submitted 17 April, 2018;
originally announced April 2018.
-
Fabrication of comb-drive actuators for straining nanostructured suspended graphene
Authors:
M. Goldsche,
G. J. Verbiest,
T. Khodkov,
J. Sonntag,
N. von den Driesch,
D. Buca,
C. Stampfer
Abstract:
We report on the fabrication and characterization of an optimized comb-drive actuator design for strain-dependent transport measurements on suspended graphene. We fabricate devices from highly p-doped silicon using deep reactive ion etching with a chromium mask. Crucially, we implement a gold layer to reduce the device resistance from $\approx51.6$ k$\mathrmΩ$ to $\approx236$ $\mathrmΩ$ at room te…
▽ More
We report on the fabrication and characterization of an optimized comb-drive actuator design for strain-dependent transport measurements on suspended graphene. We fabricate devices from highly p-doped silicon using deep reactive ion etching with a chromium mask. Crucially, we implement a gold layer to reduce the device resistance from $\approx51.6$ k$\mathrmΩ$ to $\approx236$ $\mathrmΩ$ at room temperature in order to allow for strain-dependent transport measurements. The graphene is integrated by mechanically transferring it directly onto the actuator using a polymethylmethacrylate membrane. Importantly, the integrated graphene can be nanostructured afterwards to optimize device functionality. The minimum feature size of the structured suspended graphene is 30 nm, which allows for interesting device concepts such as mechanically-tunable nanoconstrictions. Finally, we characterize the fabricated devices by measuring the Raman spectrum as well as the a mechanical resonance frequency of an integrated graphene sheet for different strain values.
△ Less
Submitted 7 June, 2018; v1 submitted 11 April, 2018;
originally announced April 2018.
-
Detecting Ultrasound Vibrations by Graphene Resonators
Authors:
G. J. Verbiest,
J. N. Kirchhof,
J. Sonntag,
M. Goldsche,
T. Khodkov,
C. Stampfer
Abstract:
Ultrasound detection is one of the most important nondestructive subsurface characterization tools of materials, whose goal is to laterally resolve the subsurface structure with nanometer or even atomic resolution. In recent years, graphene resonators attracted attention as loudspeaker and ultrasound radio, showing its potential to realize communication systems with air-carried ultrasound. Here we…
▽ More
Ultrasound detection is one of the most important nondestructive subsurface characterization tools of materials, whose goal is to laterally resolve the subsurface structure with nanometer or even atomic resolution. In recent years, graphene resonators attracted attention as loudspeaker and ultrasound radio, showing its potential to realize communication systems with air-carried ultrasound. Here we show a graphene resonator that detects ultrasound vibrations propagating through the substrate on which it was fabricated. We achieve ultimately a resolution of $\approx7$~pm/$\mathrm{\sqrt Hz}$ in ultrasound amplitude at frequencies up to 100~MHz. Thanks to an extremely high nonlinearity in the mechanical restoring force, the resonance frequency itself can also be used for ultrasound detection. We observe a shift of 120~kHz at a resonance frequency of 65~MHz for an induced vibration amplitude of 100~pm with a resolution of 25~pm. Remarkably, the nonlinearity also explains the generally observed asymmetry in the resonance frequency tuning of the resonator when pulled upon with an electrostatic gate. This work puts forward a sensor design that fits onto an atomic force microscope cantilever and therefore promises direct ultrasound detection at the nanoscale for nondestructive subsurface characterization.
△ Less
Submitted 22 June, 2018; v1 submitted 6 February, 2018;
originally announced February 2018.
-
Tailoring mechanically-tunable strain fields in graphene
Authors:
M. Goldsche,
J. Sonntag,
T. Khodkov,
G. Verbiest,
S. Reichardt,
C. Neumann,
T. Ouaj,
N. von den Driesch,
D. Buca,
C. Stampfer
Abstract:
There are a number of theoretical proposals based on strain engineering of graphene and other two-dimensional materials, however purely mechanical control of strain fields in these systems has remained a major challenge. The two approaches mostly used so far either couple the electrical and mechanical properties of the system simultaneously or introduce some unwanted disturbances due to the substr…
▽ More
There are a number of theoretical proposals based on strain engineering of graphene and other two-dimensional materials, however purely mechanical control of strain fields in these systems has remained a major challenge. The two approaches mostly used so far either couple the electrical and mechanical properties of the system simultaneously or introduce some unwanted disturbances due to the substrate. Here, we report on silicon micro-machined comb-drive actuators to controllably and reproducibly induce strain in a suspended graphene sheet, in an entirely mechanical way. We use spatially resolved confocal Raman spectroscopy to quantify the induced strain, and we show that different strain fields can be obtained by engineering the clamping geometry, including tunable strain gradients of up to 1.4 %/$μ$m. Our approach also allows for multiple axis straining and is equally applicable to other two-dimensional materials, opening the door to an investigating their mechanical and electromechanical properties. Our measurements also clearly identify defects at the edges of a graphene sheet as being weak spots responsible for its mechanical failure.
△ Less
Submitted 13 November, 2017;
originally announced November 2017.
-
Encapsulated graphene based Hall sensors on foil with increased sensitivity
Authors:
Zhenxing Wang,
Luca Banszerus,
Martin Otto,
Kenji Watanabe,
Takashi Taniguchi,
Christoph Stampfer,
Daniel Neumaier
Abstract:
The encapsulation of graphene based Hall sensors on foil is shown to be an effective method for improving the performance in terms of higher sensitivity for magnetic field detection. Two types of encapsulation were investigated: a simple encapsulation of graphene with polymethyl methacrylate (PMMA) as a proof of concept and an encapsulation with mechanically exfoliated hexagonal boron nitride (hBN…
▽ More
The encapsulation of graphene based Hall sensors on foil is shown to be an effective method for improving the performance in terms of higher sensitivity for magnetic field detection. Two types of encapsulation were investigated: a simple encapsulation of graphene with polymethyl methacrylate (PMMA) as a proof of concept and an encapsulation with mechanically exfoliated hexagonal boron nitride (hBN). The Hall sensor with PMMA encapsulation already shows higher sensitivity compared to the one without encapsulation. However, the Hall sensor with graphene encapsulated between two stacks of hBN shows a current and a voltage normalized sensitivity of up to 2270 V/AT and 0.68 V/VT respectively, which are the highest reported sensitivity values for Hall sensors on foil so far.
△ Less
Submitted 27 July, 2017;
originally announced July 2017.
-
Dry transfer of CVD graphene using MoS$_2$-based stamps
Authors:
Luca Banszerus,
Kenji Watanabe,
Takashi Taniguchi,
Bernd Beschoten,
Christoph Stampfer
Abstract:
Recently, a contamination-free dry transfer method for graphene grown by chemical vapor deposition (CVD) has been reported that allows to directly pick-up graphene from the copper growth substrate using a flake of hexagonal boron nitride (hBN), resulting in ultrahigh charge carrier mobility and low overall doping. Here, we report that not only hBN, but also flakes of molybdenum disulfide (MoS$_2$)…
▽ More
Recently, a contamination-free dry transfer method for graphene grown by chemical vapor deposition (CVD) has been reported that allows to directly pick-up graphene from the copper growth substrate using a flake of hexagonal boron nitride (hBN), resulting in ultrahigh charge carrier mobility and low overall doping. Here, we report that not only hBN, but also flakes of molybdenum disulfide (MoS$_2$) can be used to dry transfer graphene. This, on one hand, allows for the fabrication of complex van-der-Waals heterostructures using CVD graphene combined with different two-dimensional materials and, on the other hand, can be a route towards a scalable dry transfer of CVD graphene. The resulting heterostructures are studied using low temperature transport measurements revealing a strong charge carrier density dependence of the carrier mobilities (up to values of 12,000 cm$^2$/(Vs)) and the residual charge carrier density fluctuations near the charge neutrality point when changing the carrier density in the MoS$_2$ by applying a top gate voltage.
△ Less
Submitted 1 June, 2017;
originally announced June 2017.