-
Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$
Authors:
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere,
A. Brueggemann
, et al. (645 additional authors not shown)
Abstract:
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be…
▽ More
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σ$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
Operando monitoring of strain field distribution in lithium battery anode via ultra-high spatial resolution optical frequency domain reflectometer
Authors:
Kaijun Liu,
Zhijuan Zou,
Guolu Yin,
Yingze Song,
Zeheng Zhang,
Yuyang Lou,
Zixuan Zhong,
Huafeng Lu,
Duidui Li,
Tao Zhu
Abstract:
The cycling performance of lithium-ion batteries is closely related to the expansion effect of anode materials during charge and discharge processes. Studying the mechanical field evolution of anode materials is crucial for evaluating battery per-formance. Here, we propose a phase-sensitive ultra-high spatial resolution optical frequency domain reflectometry tech-nique, in which the test fiber is…
▽ More
The cycling performance of lithium-ion batteries is closely related to the expansion effect of anode materials during charge and discharge processes. Studying the mechanical field evolution of anode materials is crucial for evaluating battery per-formance. Here, we propose a phase-sensitive ultra-high spatial resolution optical frequency domain reflectometry tech-nique, in which the test fiber is embedded into the anode of a lithium-ion battery to monitor the mechanical evolution of the anode material during cycling. We investigated the strain evolution of the anode material under different loading levels and used this method to infer the morphological changes of the material. Furthermore, combining this with battery capacity in-formation provides a new approach for assessing the performance of lithium-ion batteries.
△ Less
Submitted 3 July, 2024;
originally announced July 2024.
-
Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter
Authors:
M. Aamir,
B. Acar,
G. Adamov,
T. Adams,
C. Adloff,
S. Afanasiev,
C. Agrawal,
C. Agrawal,
A. Ahmad,
H. A. Ahmed,
S. Akbar,
N. Akchurin,
B. Akgul,
B. Akgun,
R. O. Akpinar,
E. Aktas,
A. AlKadhim,
V. Alexakhin,
J. Alimena,
J. Alison,
A. Alpana,
W. Alshehri,
P. Alvarez Dominguez,
M. Alyari,
C. Amendola
, et al. (550 additional authors not shown)
Abstract:
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr…
▽ More
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated.
△ Less
Submitted 30 June, 2024; v1 submitted 17 June, 2024;
originally announced June 2024.
-
Continuous momentum state lasing and cavity frequency-pinning with laser-cooled strontium atoms
Authors:
V. M. Schäfer,
Z. Niu,
J. R. K. Cline,
D. J. Young,
E. Y. Song,
H. Ritsch,
J. K. Thompson
Abstract:
Laser-cooled gases of atoms interacting with the field of an optical cavity are a powerful tool for quantum sensing and the simulation of open and closed quantum systems. They can display spontaneous self-organisation phase transitions, time crystals, new lasing mechanisms, squeezed states for quantum sensing, protection of quantum coherence, and dynamical phase transitions. However, all of these…
▽ More
Laser-cooled gases of atoms interacting with the field of an optical cavity are a powerful tool for quantum sensing and the simulation of open and closed quantum systems. They can display spontaneous self-organisation phase transitions, time crystals, new lasing mechanisms, squeezed states for quantum sensing, protection of quantum coherence, and dynamical phase transitions. However, all of these phenomena are explored in a discontinuous manner due to the need to stop and reload a new ensemble of atoms. Here we report the observation of hours-long continuous lasing from laser-cooled $^{88}$Sr atoms continuously loaded into a ring cavity. The required inversion to produce lasing arises from inversion in the atomic momentum degree of freedom, a mechanism related directly to self-organization phase transitions and collective atomic recoil lasing, both of which were previously only observed in a cyclic fashion compared to the truly continuous behavior here. Further, the sensitivity of the lasing frequency to cavity frequency changes is 120 fold suppressed due to an atomic loss mechanism, opening an interesting new path to compensate cavity frequency noise for realizing narrow frequency references. This work opens the way for continuous cavity QED quantum simulation experiments as well as continuous superradiant lasers.
△ Less
Submitted 31 May, 2024;
originally announced May 2024.
-
Dual-grating single-shot pump-probe technique
Authors:
Tianchen Yu,
Junyi Yang,
Wenfa Zhou,
Zhongguo Li,
Xingzhi Wu,
Yu Fang,
Yong Yang,
Yinglin Song
Abstract:
A simple and effective single-shot pump-probe technique is reported for studying the ultrafast dynamic processes in various materials. Using only two commercial gratings, a large time window of ~ 95.58 ps is spatially encoded in a single probe pulse, and single-shot time-resolved measurements are implemented. This time window exceeds the maximum reported values for single-shot pump-probe technique…
▽ More
A simple and effective single-shot pump-probe technique is reported for studying the ultrafast dynamic processes in various materials. Using only two commercial gratings, a large time window of ~ 95.58 ps is spatially encoded in a single probe pulse, and single-shot time-resolved measurements are implemented. This time window exceeds the maximum reported values for single-shot pump-probe techniques using the echelon or angle beam encoding strategy. The phase difference problem in the echelon encoding strategies is also eliminated and a customized echelon is not needed in this technique. The ultrafast dynamic processes of ZnSe and indolium squaraine at a wavelength of 650 nm were investigated using this technique.
△ Less
Submitted 31 May, 2024; v1 submitted 10 May, 2024;
originally announced May 2024.
-
Navigating Chemical Space with Latent Flows
Authors:
Guanghao Wei,
Yining Huang,
Chenru Duan,
Yue Song,
Yuanqi Du
Abstract:
Recent progress of deep generative models in the vision and language domain has stimulated significant interest in more structured data generation such as molecules. However, beyond generating new random molecules, efficient exploration and a comprehensive understanding of the vast chemical space are of great importance to molecular science and applications in drug design and materials discovery.…
▽ More
Recent progress of deep generative models in the vision and language domain has stimulated significant interest in more structured data generation such as molecules. However, beyond generating new random molecules, efficient exploration and a comprehensive understanding of the vast chemical space are of great importance to molecular science and applications in drug design and materials discovery. In this paper, we propose a new framework, ChemFlow, to traverse chemical space through navigating the latent space learned by molecule generative models through flows. We introduce a dynamical system perspective that formulates the problem as learning a vector field that transports the mass of the molecular distribution to the region with desired molecular properties or structure diversity. Under this framework, we unify previous approaches on molecule latent space traversal and optimization and propose alternative competing methods incorporating different physical priors. We validate the efficacy of ChemFlow on molecule manipulation and single- and multi-objective molecule optimization tasks under both supervised and unsupervised molecular discovery settings. Codes and demos are publicly available on GitHub at https://github.com/garywei944/ChemFlow.
△ Less
Submitted 7 May, 2024; v1 submitted 6 May, 2024;
originally announced May 2024.
-
Visualization for physics analysis improvement and applications in BESIII
Authors:
Zhi-Jun Li,
Ming-Kuan Yuan,
Yun-Xuan Song,
Yan-Gu Li,
Jing-Shu Li,
Sheng-Sen Sun,
Xiao-Long Wang,
Zheng-Yun You,
Ya-Jun Mao
Abstract:
Modern particle physics experiments usually rely on highly complex and large-scale spectrometer devices. In high energy physics experiments, visualization helps detector design, data quality monitoring, offline data processing, and has great potential for improving physics analysis. In addition to the traditional physics data analysis based on statistical methods, visualization provides unique int…
▽ More
Modern particle physics experiments usually rely on highly complex and large-scale spectrometer devices. In high energy physics experiments, visualization helps detector design, data quality monitoring, offline data processing, and has great potential for improving physics analysis. In addition to the traditional physics data analysis based on statistical methods, visualization provides unique intuitive advantages in searching for rare signal events and reducing background noises. By applying the event display tool to several physics analyses in the BESIII experiment, we demonstrate that visualization can benefit potential physics discovery and improve the signal significance. With the development of modern visualization techniques, it is expected to play a more important role in future data processing and physics analysis of particle physics experiments.
△ Less
Submitted 4 July, 2024; v1 submitted 19 March, 2024;
originally announced April 2024.
-
I-mode Plasma Confinement Improvement by Real-time Lithium Injection and its Classification on EAST Tokamak
Authors:
X. M. Zhong,
X. L. Zou,
A. D. Liu,
Y. T. Song,
G. Zhuang,
H. Q. Liu,
L. Q. Xu,
E. Z. Li,
B. Zhang,
G. Z. Zuo,
Z. Wang,
C. Zhou,
J. Zhang,
W. X. Shi,
L. T. Gao,
S. F. Wang,
W. Gao,
T. Q. Jia,
Q. Zang,
H. L. Zhao,
M. Wang,
H. D. Xu,
X. J. Wang,
X. Gao,
X. D. Lin
, et al. (3 additional authors not shown)
Abstract:
I-mode is a promising regime for future fusion reactors due to the high energy confinement and the moderate particle confinement. However, the effect of lithium, which has been widely applied for particle recycling and impurity control, on I-mode plasma is still unclear. Recently, experiments of real-time lithium powder injection on I-mode plasma have been carried out in EAST Tokamak. It was found…
▽ More
I-mode is a promising regime for future fusion reactors due to the high energy confinement and the moderate particle confinement. However, the effect of lithium, which has been widely applied for particle recycling and impurity control, on I-mode plasma is still unclear. Recently, experiments of real-time lithium powder injection on I-mode plasma have been carried out in EAST Tokamak. It was found that the confinement performance of the I-mode can be improved by the lithium powder injection, which can strongly reduce electron turbulence (ET) and then trigger ion turbulence (IT). Four different regimes of I-mode have been identified in EAST. The Type I I-mode plasma is characterized by the weakly coherent mode (WCM) and the geodesic-acoustic mode (GAM). The Type II I-mode is featured as the WCM and the edge temperature ring oscillation (ETRO). The Type III I-mode corresponds to the plasma with the co-existence of ETRO, GAM, and WCM. The Type IV I-mode denotes the plasma with only WCM but without ETRO and GAM. It has been observed that WCM and ETRO are increased with lithium powder injection due to the reduction of ion and electron turbulence, and the enhancement of the pedestal electron temperature gradient. EAST experiments demonstrate that lithium powder injection is an effective tool for real-time control and confinement improvement of I-mode plasma.
△ Less
Submitted 10 April, 2024;
originally announced April 2024.
-
Net 835-Gb/s/λ Carrier- and LO-Free 100-km Transmission Using Channel-Aware Phase Retrieval Reception
Authors:
Hanzi Huang,
Haoshuo Chen,
Qian Hu,
Di Che,
Yetian Huang,
Brian Stern,
Nicolas K. Fontaine,
Mikael Mazur,
Lauren Dallachiesa,
Roland Ryf,
Zhengxuan Li,
Yingxiong Song
Abstract:
We experimentally demonstrate the first carrier- and LO-free 800G/λ receiver enabling direct compatibility with standard coherent transmitters via phase retrieval, achieving net 835-Gb/s transmission over 100-km SMF and record 8.27-b/s/Hz net optical spectral efficiency.
We experimentally demonstrate the first carrier- and LO-free 800G/λ receiver enabling direct compatibility with standard coherent transmitters via phase retrieval, achieving net 835-Gb/s transmission over 100-km SMF and record 8.27-b/s/Hz net optical spectral efficiency.
△ Less
Submitted 10 April, 2024;
originally announced April 2024.
-
Integrated electro-optics on thin-film lithium niobate
Authors:
Yaowen Hu,
Di Zhu,
Shengyuan Lu,
Xinrui Zhu,
Yunxiang Song,
Dylan Renaud,
Daniel Assumpcao,
Rebecca Cheng,
CJ Xin,
Matthew Yeh,
Hana Warner,
Xiangwen Guo,
Amirhassan Shams-Ansari,
David Barton,
Neil Sinclair,
Marko Loncar
Abstract:
Electro-optics serves as the crucial bridge between electronics and photonics, unlocking a wide array of applications ranging from communications and computing to sensing and quantum information. Integrated electro-optics approaches in particular enable essential electronic high-speed control for photonics while offering substantial photonic parallelism for electronics. Recent strides in thin-film…
▽ More
Electro-optics serves as the crucial bridge between electronics and photonics, unlocking a wide array of applications ranging from communications and computing to sensing and quantum information. Integrated electro-optics approaches in particular enable essential electronic high-speed control for photonics while offering substantial photonic parallelism for electronics. Recent strides in thin-film lithium niobate photonics have ushered revolutionary advancements in electro-optics. This technology not only offers the requisite strong electro-optic coupling but also boasts ultra-low optical loss and high microwave bandwidth. Further, its tight confinement and compatibility with nanofabrication allow for unprecedented reconfigurability and scalability, facilitating the creation of novel and intricate devices and systems that were once deemed nearly impossible in bulk systems. Building upon this platform, the field has witnessed the emergence of various groundbreaking electro-optic devices surpassing the current state of the art, and introducing functionalities that were previously non-existent. This technological leap forward provides a unique framework to explore various realms of physics as well, including photonic non-Hermitian synthetic dimensions, active topological physics, and quantum electro-optics. In this review, we present the fundamental principles of electro-optics, drawing connections between fundamental science and the forefront of technology. We discuss the accomplishments and future prospects of integrated electro-optics, enabled by thin-film lithium niobate platform.
△ Less
Submitted 11 April, 2024; v1 submitted 9 April, 2024;
originally announced April 2024.
-
Unified Generative Modeling of 3D Molecules via Bayesian Flow Networks
Authors:
Yuxuan Song,
Jingjing Gong,
Yanru Qu,
Hao Zhou,
Mingyue Zheng,
Jingjing Liu,
Wei-Ying Ma
Abstract:
Advanced generative model (e.g., diffusion model) derived from simplified continuity assumptions of data distribution, though showing promising progress, has been difficult to apply directly to geometry generation applications due to the multi-modality and noise-sensitive nature of molecule geometry. This work introduces Geometric Bayesian Flow Networks (GeoBFN), which naturally fits molecule geom…
▽ More
Advanced generative model (e.g., diffusion model) derived from simplified continuity assumptions of data distribution, though showing promising progress, has been difficult to apply directly to geometry generation applications due to the multi-modality and noise-sensitive nature of molecule geometry. This work introduces Geometric Bayesian Flow Networks (GeoBFN), which naturally fits molecule geometry by modeling diverse modalities in the differentiable parameter space of distributions. GeoBFN maintains the SE-(3) invariant density modeling property by incorporating equivariant inter-dependency modeling on parameters of distributions and unifying the probabilistic modeling of different modalities. Through optimized training and sampling techniques, we demonstrate that GeoBFN achieves state-of-the-art performance on multiple 3D molecule generation benchmarks in terms of generation quality (90.87% molecule stability in QM9 and 85.6% atom stability in GEOM-DRUG. GeoBFN can also conduct sampling with any number of steps to reach an optimal trade-off between efficiency and quality (e.g., 20-times speedup without sacrificing performance).
△ Less
Submitted 17 March, 2024;
originally announced March 2024.
-
Effective multiband synthetic four-wave mixing by cascading quadratic processes
Authors:
Li Chen,
Zheng Ge,
Su-Jian Niu,
Yin-Hai Li,
Zhao-Qi-Zhi Han,
Yue-Wei Song,
Wu-Zhen Li,
Ren-Hui Chen,
Ming-Yuan Gao,
Meng-Yu Xie,
Zhi-Yuan Zhou,
Bao-Sen Shi
Abstract:
Four wave mixing (FWM) is an important way to generate supercontinuum and frequency combs in the mid-infrared band. Here, we obtain simultaneous synthetic FWM in the visible and mid-infrared bands by cascading quadratic nonlinear processes in a periodically poled lithium niobate crystal (PPLN), which has a 110dB(at 3000nm) higher conversion efficiency than the FWM directly generated by third-order…
▽ More
Four wave mixing (FWM) is an important way to generate supercontinuum and frequency combs in the mid-infrared band. Here, we obtain simultaneous synthetic FWM in the visible and mid-infrared bands by cascading quadratic nonlinear processes in a periodically poled lithium niobate crystal (PPLN), which has a 110dB(at 3000nm) higher conversion efficiency than the FWM directly generated by third-order susceptibilities in bulk PPLN crystals. A general model of this process is developed that is in full agreement with the experimental verifications. The frequency difference between the new frequency components can be freely tuned by changing the frequency difference of the dual pump lasers. Furthermore, by increasing the conversion bandwidth and efficiency of the cascaded processes, it is feasible to generate frequency combs in three bands the visible, near-infrared and mid-infrared bands simultaneously through high-order cascaded processes. This work opens up a new avenue toward free-tuning multiband frequency comb generation with multi-octaves frequency spanning, which will have significant applications in fields such as mid-infrared gas sensing, lidar and precision spectroscopy.
△ Less
Submitted 11 March, 2024;
originally announced March 2024.
-
Octave-spanning Kerr soliton frequency combs in dispersion- and dissipation-engineered lithium niobate microresonators
Authors:
Yunxiang Song,
Yaowen Hu,
Xinrui Zhu,
Kiyoul Yang,
Marko Loncar
Abstract:
Dissipative Kerr solitons from optical microresonators, commonly referred to as soliton microcombs, have been developed for a broad range of applications, including precision measurement, optical frequency synthesis, and ultra-stable microwave and millimeter wave generation, all on a chip. An important goal for microcombs is self referencing, which requires octave-spanning bandwidths to detect and…
▽ More
Dissipative Kerr solitons from optical microresonators, commonly referred to as soliton microcombs, have been developed for a broad range of applications, including precision measurement, optical frequency synthesis, and ultra-stable microwave and millimeter wave generation, all on a chip. An important goal for microcombs is self referencing, which requires octave-spanning bandwidths to detect and stabilize the comb carrier envelope offset frequency. Further, detection and locking of the comb spacings are often achieved using frequency division by electro-optic modulation. The thin-film lithium niobate photonic platform, with its low loss, strong second- and third-order nonlinearity, as well as large Pockels effect, is ideally suited for these tasks. However, octave-spanning soliton microcombs are challenging to demonstrate on this platform, largely complicated by strong Raman effects hindering reliable fabrication of soliton devices. Here, we demonstrate entirely connected and octave-spanning soliton microcombs on thin-film lithium niobate. With appropriate control over microresonator free spectral range and dissipation spectrum, we show that soliton-inhibiting Raman effects are suppressed, and soliton devices are fabricated with near-unity yield. Our work offers an unambiguous method for soliton generation on strongly Raman-active materials. Further, it anticipates monolithically integrated, self-referenced frequency standards in conjunction with established technologies, such as periodically poled waveguides and electro-optic modulators, on thin-film lithium niobate.
△ Less
Submitted 25 May, 2024; v1 submitted 2 March, 2024;
originally announced March 2024.
-
Twenty-nine million Intrinsic Q-factor Monolithic Microresonators on Thin Film Lithium Niobate
Authors:
Xinrui Zhu,
Yaowen Hu,
Shengyuan Lu,
Hana K. Warner,
Xudong Li,
Yunxiang Song,
Leticia Magalhaes,
Amirhassan Shams-Ansari,
Neil Sinclair,
Marko Loncar
Abstract:
The recent emergence of thin-film lithium niobate (TFLN) has extended the landscape of integrated photonics. This has been enabled by the commercialization of TFLN wafers and advanced nanofabrication of TFLN such as high-quality dry etching. However, fabrication imperfections still limit the propagation loss to a few dB/m, restricting the impact of this platform. Here, we demonstrate TFLN microres…
▽ More
The recent emergence of thin-film lithium niobate (TFLN) has extended the landscape of integrated photonics. This has been enabled by the commercialization of TFLN wafers and advanced nanofabrication of TFLN such as high-quality dry etching. However, fabrication imperfections still limit the propagation loss to a few dB/m, restricting the impact of this platform. Here, we demonstrate TFLN microresonators with a record-high intrinsic quality (Q) factor of twenty-nine million, corresponding to an ultra-low propagation loss of 1.3 dB/m. We present spectral analysis and the statistical distribution of Q factors across different resonator geometries. Our work pushes the fabrication limits of TFLN photonics to achieve a Q factor within one order of magnitude of the material limit.
△ Less
Submitted 25 February, 2024;
originally announced February 2024.
-
Hybrid Kerr-electro-optic frequency combs on thin-film lithium niobate
Authors:
Yunxiang Song,
Yaowen Hu,
Marko Lončar,
Kiyoul Yang
Abstract:
Optical frequency combs are indispensable links between the optical and microwave domains, enabling a wide range of applications including precision spectroscopy, ultrastable frequency generation, and timekeeping. Chip-scale integration miniaturizes bulk implementations onto photonic chips, offering highly compact, stable, and power-efficient frequency comb sources. State of the art integrated fre…
▽ More
Optical frequency combs are indispensable links between the optical and microwave domains, enabling a wide range of applications including precision spectroscopy, ultrastable frequency generation, and timekeeping. Chip-scale integration miniaturizes bulk implementations onto photonic chips, offering highly compact, stable, and power-efficient frequency comb sources. State of the art integrated frequency comb sources are based on resonantly-enhanced Kerr effect and, more recently, on electro-optic effect. While the former can routinely reach octave-spanning bandwidths and the latter feature microwave-rate spacings, achieving both in the same material platform has been challenging. Here, we leverage both strong Kerr nonlinearity and efficient electro-optic phase modulation available in the ultralow-loss thin-film lithium niobate photonic platform, to demonstrate a hybrid Kerr-electro-optic frequency comb with stabilized spacing. In our approach, a dissipative Kerr soliton is first generated, and then electro-optic division is used to realize a frequency comb with 2,589 comb lines spaced by 29.308 GHz and spanning 75.9 THz (588 nm) end-to-end. Further, we demonstrate electronic stabilization and control of the soliton spacing, naturally facilitated by our approach. The broadband, microwave-rate comb in this work overcomes the spacing-span tradeoff that exists in all integrated frequency comb sources, and paves the way towards chip-scale solutions for complex tasks such as laser spectroscopy covering multiple bands, micro- and millimeter-wave generation, and massively parallel optical communications.
△ Less
Submitted 18 February, 2024;
originally announced February 2024.
-
Hyperphosphorylation-Induced Phase Transition in Vesicle Delivery Dynamics of Motor Proteins in Neuronal Cells
Authors:
Eunsang Lee,
Donghee Kim,
Yo Han Song,
Kyujin Shin,
Sanggeun Song,
Minho Lee,
Yeongchang Goh,
Mi Hee Lim,
Ji-Hyun Kim,
Jaeyoung Sung,
Kang Taek Lee
Abstract:
Synaptic vesicle transport by motor proteins along microtubules is a crucial active process underlying neuronal communication. It is known that microtubules are destabilized by tau-hyperphosphorylation, which causes tau proteins to detach from microtubules and form neurofibril tangles. However, how tau-phosphorylation affects transport dynamics of motor proteins on the microtubule remains unknown.…
▽ More
Synaptic vesicle transport by motor proteins along microtubules is a crucial active process underlying neuronal communication. It is known that microtubules are destabilized by tau-hyperphosphorylation, which causes tau proteins to detach from microtubules and form neurofibril tangles. However, how tau-phosphorylation affects transport dynamics of motor proteins on the microtubule remains unknown. Here, we discover that long-distance unidirectional motion of vesicle-motor protein multiplexes (VMPMs) in living cells is suppressed under tau-hyperphosphorylation, with the consequent loss of fast vesicle-transport along the microtubule. The VMPMs in hyperphosphorylated cells exhibit seemingly bidirectional random motion, with dynamic properties far different from VMPM motion in normal cells. We establish a parsimonious physicochemical model of VMPM's active motion that provides a unified, quantitative explanation and predictions for our experimental results. Our analysis reveals that, under hyperphosphorylation conditions, motor-protein-multiplexes have both static and dynamic motility fluctuations. The loss of the fast vesicle-transport along the microtubule can be a mechanism of neurodegenerative disorders associated with tau-hyperphosphorylation.
△ Less
Submitted 23 April, 2024; v1 submitted 27 January, 2024;
originally announced January 2024.
-
The Magnetic Field Calibration of the Full-Disk Magnetograph onboard the Advanced Space based Solar Observatory (ASO-S/FMG)
Authors:
S. Liu,
J. T. Su,
X. Y. Bai,
Y. Y. Deng,
J. Chen,
Y. L. Song,
X. F. Wang,
H. Q. Xu,
X. Yang
Abstract:
The Full-disk magnetograph is a main scientific payload onboard the Advanced Space based Solar Observatory (ASO-S/FMG) that through Stokes parameter observation to measures the vector magnetic field. The accuracy of magnetic-field values is an important aspect of checking the quality of the FMG magnetic-field measurement. According to the design of the FMG, the linear calibration method under the…
▽ More
The Full-disk magnetograph is a main scientific payload onboard the Advanced Space based Solar Observatory (ASO-S/FMG) that through Stokes parameter observation to measures the vector magnetic field. The accuracy of magnetic-field values is an important aspect of checking the quality of the FMG magnetic-field measurement. According to the design of the FMG, the linear calibration method under the weak-field approximation is the preferred scheme for magnetic-field calibration. However, the spacecraft orbital velocity can affect the position of observed spectral lines, then result in a change of the polarization-signal strength. Thus, the magnetic field is modulated by the orbit velocity of the spacecraft. In this article, through cross calibration between FMG and HMI (Helioseismic and Magnetic Imager onboard the Solar Dynamic Observatory), the effects of spacecraft orbital velocity on the coefficient of magnetic-field calibration are investigated. By comparing the magnetic field of FMG and HMI with spacecraft orbital velocity as an auxiliary reference, the revised linear-calibration coefficients that depend on spacecraft orbital velocity are obtained. Magnetic field of FMG corrected by the revised calibration coefficients removing the effect of spacecraft orbital velocity will be more accurate and suitable for scientific research.
△ Less
Submitted 30 November, 2023;
originally announced December 2023.
-
Building confidence in state-of-the-art ab initio calculations of the density virial coefficients B and C of helium-4: Part 2. Direct evaluation by high accuracy experimental data using RIGT
Authors:
Haiyang Zhang,
Wenjing Liu,
Xiangjie Kong,
Bo Gao,
Yaonan Song,
Mark Plimmer,
Laurent Pitre
Abstract:
In our previous work [1], using indirect evaluation methods we concluded that the uncertainties of the second and the third density virial coefficient, B and C, of helium-4 at 5 K calculated by various authors had been overestimated. To check the reliability of these values and appraisal of uncertainties from ab initio calculations still further, a refractive-index gas thermometry method was devel…
▽ More
In our previous work [1], using indirect evaluation methods we concluded that the uncertainties of the second and the third density virial coefficient, B and C, of helium-4 at 5 K calculated by various authors had been overestimated. To check the reliability of these values and appraisal of uncertainties from ab initio calculations still further, a refractive-index gas thermometry method was developed to determine simultaneously thermodynamic temperatures and density virial coefficients. Using this technique, high accuracy experimental values of B and C of helium-4 and new values of T-T90 were obtained for the range 5 K to 25 K. A direct comparison with the ab initio calculation density virial coefficients was made. Results support the conclusion of our previous work, i.e., the ab initio calculation uncertainties u(B) [J. Chem. Phys. 136, 224303 (2012)] and u(C) [J. Chem. Phys. 134, 134106 (2011)] of helium-4 were overestimated by a factor of severalfold.
△ Less
Submitted 4 January, 2024; v1 submitted 29 November, 2023;
originally announced November 2023.
-
Transverse Emittance Reduction in Muon Beams by Ionization Cooling
Authors:
The MICE Collaboration,
M. Bogomilov,
R. Tsenov,
G. Vankova-Kirilova,
Y. P. Song,
J. Y. Tang,
Z. H. Li,
R. Bertoni,
M. Bonesini,
F. Chignoli,
R. Mazza,
A. de Bari,
D. Orestano,
L. Tortora,
Y. Kuno,
H. Sakamoto,
A. Sato,
S. Ishimoto,
M. Chung,
C. K. Sung,
F. Filthaut,
M. Fedorov,
D. Jokovic,
D. Maletic,
M. Savic
, et al. (112 additional authors not shown)
Abstract:
Accelerated muon beams have been considered for next-generation studies of high-energy lepton-antilepton collisions and neutrino oscillations. However, high-brightness muon beams have not yet been produced. The main challenge for muon acceleration and storage stems from the large phase-space volume occupied by the beam, derived from the muon production mechanism through the decay of pions from pro…
▽ More
Accelerated muon beams have been considered for next-generation studies of high-energy lepton-antilepton collisions and neutrino oscillations. However, high-brightness muon beams have not yet been produced. The main challenge for muon acceleration and storage stems from the large phase-space volume occupied by the beam, derived from the muon production mechanism through the decay of pions from proton collisions. Ionization cooling is the technique proposed to decrease the muon beam phase-space volume. Here we demonstrate a clear signal of ionization cooling through the observation of transverse emittance reduction in beams that traverse lithium hydride or liquid hydrogen absorbers in the Muon Ionization Cooling Experiment (MICE). The measurement is well reproduced by the simulation of the experiment and the theoretical model. The results shown here represent a substantial advance towards the realization of muon-based facilities that could operate at the energy and intensity frontiers.
△ Less
Submitted 13 October, 2023; v1 submitted 9 October, 2023;
originally announced October 2023.
-
Distortion-Aware Phase Retrieval Receiver for High-Order QAM Transmission with Carrierless Intensity-Only Measurements
Authors:
Hanzi Huang,
Haoshuo Chen,
Qi Gao,
Yetian Huang,
Nicolas K. Fontaine,
Mikael Mazur,
Lauren Dallachiesa,
Roland Ryf,
Zhengxuan Li,
Yingxiong Song
Abstract:
We experimentally investigate transmitting high-order quadrature amplitude modulation (QAM) signals with carrierless and intensity-only measurements with phase retrieval (PR) receiving techniques. The intensity errors during measurement, including noise and distortions, are found to be a limiting factor for the precise convergence of the PR algorithm. To improve the PR reconstruction accuracy, we…
▽ More
We experimentally investigate transmitting high-order quadrature amplitude modulation (QAM) signals with carrierless and intensity-only measurements with phase retrieval (PR) receiving techniques. The intensity errors during measurement, including noise and distortions, are found to be a limiting factor for the precise convergence of the PR algorithm. To improve the PR reconstruction accuracy, we propose a distortion-aware PR scheme comprising both training and reconstruction stages. By estimating and emulating the distortion caused by various channel impairments, the proposed scheme enables enhanced agreement between the estimated and measured amplitudes throughout the PR iteration, thus resulting in improved reconstruction performance to support high-order QAM transmission. With the aid of proposed techniques, we experimentally demonstrate 50-GBaud 16QAM and 32QAM signals transmitting through a standard single-mode optical fiber (SSMF) span of 40 and 80 km, and achieve bit error rates (BERs) below the 6.25% hard decision (HD)-forward error correction (FEC) and 25% soft decision (SD)-FEC thresholds for the two modulation formats, respectively. By tuning the pilot symbol ratio and applying concatenated coding, we also demonstrate that a post-FEC data rate of up to 140 Gb/s can be achieved for both distances at an optimal pilot symbol ratio of 20%.
△ Less
Submitted 8 October, 2023;
originally announced October 2023.
-
Single-shot pump-probe technique by the combination of an echelon and a grating with a time window of 109 ps
Authors:
Tianchen Yu,
Junyi Yang,
Zhongguo Li,
Xingzhi Wu,
Yu Fang,
Yong Yang,
Yinglin Song
Abstract:
In this study, using only a single pulse, pump-probe measurement with a large time window of more than 100 ps is implemented. A commercial grating is used to encode a time window of ~ 56 ps in a single pulse; therefore, there is no need for machining customization. In addition, in this technique, the grating surface is accurately imaged, eliminating the image blur problem caused by phase differenc…
▽ More
In this study, using only a single pulse, pump-probe measurement with a large time window of more than 100 ps is implemented. A commercial grating is used to encode a time window of ~ 56 ps in a single pulse; therefore, there is no need for machining customization. In addition, in this technique, the grating surface is accurately imaged, eliminating the image blur problem caused by phase differences in previous echelon-based techniques. Moreover, to make full use of the grating surface and obtain a larger time window, a simple reflection echelon is combined that matches the grating in the time window. This combination encoding strategy results in a total time window of ~ 109 ps and maintains accurate imaging of the grating surface. This time window is an order of magnitude greater than the maximum reported values of the echelon encoding strategy and the angle beam encoding strategy. To demonstrate this single-shot pump-probe technique, the two-photon absorption process of ZnSe and the excited-state absorption process of a symmetrical phenoxazinium bromine salt were studied. The possibility of further improving the experimental setup is also discussed.
△ Less
Submitted 27 December, 2023; v1 submitted 4 October, 2023;
originally announced October 2023.
-
Chiral light in twisted Fabry-Pérot cavities
Authors:
Sergey A. Dyakov,
Natalia Salakhova,
Alexey V. Ignatov,
Ilia M. Fradkin,
Vitaly P. Panov,
Yan-kun Song,
Nikolay A. Gippius
Abstract:
Fundamental studies of the interaction of chiral light with chiral matter are important for the development of techniques that allow handedness-selective optical detection of chiral organic molecules. One approach to achieve this goal is the creation of a Fabry-Pérot cavity that supports eigenmodes with a desired electromagnetic handedness, which interacts differently with left and right molecular…
▽ More
Fundamental studies of the interaction of chiral light with chiral matter are important for the development of techniques that allow handedness-selective optical detection of chiral organic molecules. One approach to achieve this goal is the creation of a Fabry-Pérot cavity that supports eigenmodes with a desired electromagnetic handedness, which interacts differently with left and right molecular enantiomers. In this paper, we theoretically study chiral Fabry-Pérot cavities with mirrors comprising one-dimensional photonic crystal slabs made of van der Waals As$_2$S$_3$, a material with one of the highest known in-plane anisotropy. By utilizing the anisotropy degree of freedom provided by As$_2$S$_3$, we design Fabry-Pérot cavities with constitutional and configurational geometrical chiralities. We demonstrate that in cavities with constitutional chirality, electromagnetic modes of left or right handedness exist due to the chirality of both mirrors, often referred to as handedness preserving mirrors in the literature. At the same time, cavities with configurational chirality support modes of both handednesses due to chiral morphology of the entire structure, set by the twist angle between the optical axes of the upper and lower non-chiral anisotropic mirrors. The developed chiral Fabry-Pérot cavities can be tuned to the technologically available distance between the mirrors by properly twisting them, making such systems a prospective platform for the coupling of chiral light with chiral matter.
△ Less
Submitted 28 September, 2023;
originally announced September 2023.
-
Efficient synthesis of Vitamin D3 in a 3D ultraviolet photochemical microreactor fabricated using an ultrafast laser
Authors:
Aodong Zhang,
Jian Xu,
Lingling Xia,
Ming Hu,
Yunpeng Song,
Miao Wu,
Ya Cheng
Abstract:
Large-scale, high-precision, and high-transparency microchannels hold great potential for developing high-performance continuous-flow photochemical reactions. We demonstrate ultrafast laser-enabled fabrication of 3D microchannel reactors in ultraviolet (UV) grade fused silica which exhibit high transparency under the illumination of UV light sources of wavelengths well below 300 nm with excellent…
▽ More
Large-scale, high-precision, and high-transparency microchannels hold great potential for developing high-performance continuous-flow photochemical reactions. We demonstrate ultrafast laser-enabled fabrication of 3D microchannel reactors in ultraviolet (UV) grade fused silica which exhibit high transparency under the illumination of UV light sources of wavelengths well below 300 nm with excellent mixing efficiency. With the fabricated glass microchannel reactors, we demonstrate continuous-flow UV photochemical synthesis of vitamin D3 with low power consumption of the UV light sources.
△ Less
Submitted 4 September, 2023;
originally announced September 2023.
-
Heterogeneous integration of spin-photon interfaces with a scalable CMOS platform
Authors:
Linsen Li,
Lorenzo De Santis,
Isaac Harris,
Kevin C. Chen,
Yihuai Gao,
Ian Christen,
Matthew Trusheim,
Hyeongrak Choi,
Yixuan Song,
Carlos Errando-Herranz,
Jiahui Du,
Yong Hu,
Genevieve Clark,
Mohamed I. Ibrahim,
Gerald Gilbert,
Ruonan Han,
Dirk Englund
Abstract:
Color centers in diamonds have emerged as a leading solid-state platform for advancing quantum technologies, satisfying the DiVincenzo criteria and recently achieving a quantum advantage in secret key distribution. Recent theoretical works estimate that general-purpose quantum computing using local quantum communication networks will require millions of physical qubits to encode thousands of logic…
▽ More
Color centers in diamonds have emerged as a leading solid-state platform for advancing quantum technologies, satisfying the DiVincenzo criteria and recently achieving a quantum advantage in secret key distribution. Recent theoretical works estimate that general-purpose quantum computing using local quantum communication networks will require millions of physical qubits to encode thousands of logical qubits, which presents a substantial challenge to the hardware architecture at this scale. To address the unanswered scaling problem, in this work, we first introduce a scalable hardware modular architecture "Quantum System-on-Chip" (QSoC) that features compact two-dimensional arrays "quantum microchiplets" (QMCs) containing tin-vacancy (SnV-) spin qubits integrated on a cryogenic application-specific integrated circuit (ASIC). We demonstrate crucial architectural subcomponents, including (1) QSoC fabrication via a lock-and-release method for large-scale heterogeneous integration; (2) a high-throughput calibration of the QSoC for spin qubit spectral inhomogenous registration; (3) spin qubit spectral tuning functionality for inhomogenous compensation; (4) efficient spin-state preparation and measurement for improved spin and optical properties. QSoC architecture supports full connectivity for quantum memory arrays in a set of different resonant frequencies and offers the possibility for further scaling the number of solid-state physical qubits via larger and denser QMC arrays and optical frequency multiplexing networking.
△ Less
Submitted 20 December, 2023; v1 submitted 28 August, 2023;
originally announced August 2023.
-
Reinforcement learning-guided long-timescale simulation of hydrogen transport in metals
Authors:
Hao Tang,
Boning Li,
Yixuan Song,
Mengren Liu,
Haowei Xu,
Guoqing Wang,
Heejung Chung,
Ju Li
Abstract:
Atomic diffusion in solids is an important process in various phenomena. However, atomistic simulations of diffusion processes are confronted with the timescale problem: the accessible simulation time is usually far shorter than that of experimental interests. In this work, we developed a long-timescale method using reinforcement learning that simulates diffusion processes. As a testbed, we simula…
▽ More
Atomic diffusion in solids is an important process in various phenomena. However, atomistic simulations of diffusion processes are confronted with the timescale problem: the accessible simulation time is usually far shorter than that of experimental interests. In this work, we developed a long-timescale method using reinforcement learning that simulates diffusion processes. As a testbed, we simulate hydrogen diffusion in pure metals and a medium entropy alloy, CrCoNi, getting hydrogen diffusivity reasonably consistent with previous experiments. We also demonstrate that our method can accelerate the sampling of low-energy configurations compared to the Metropolis-Hastings algorithm using hydrogen migration to copper (111) surface sites as an example.
△ Less
Submitted 5 July, 2023;
originally announced July 2023.
-
Ultrasonic backscattering model for Rayleigh waves in polycrystals with Born and independent scattering approximations
Authors:
Shan Li,
Ming Huang,
Yongfeng Song,
Bo Lan,
Xiongbing Li
Abstract:
This paper presents theoretical and numerical models for the backscattering of 2D Rayleigh waves in single-phase, untextured polycrystalline materials with statistically equiaxed grains. The theoretical model, based on our prior inclusion-induced Rayleigh wave scattering model and the independent scattering approximation, considers single scattering of Rayleigh-to-Rayleigh (R-R) waves. The numeric…
▽ More
This paper presents theoretical and numerical models for the backscattering of 2D Rayleigh waves in single-phase, untextured polycrystalline materials with statistically equiaxed grains. The theoretical model, based on our prior inclusion-induced Rayleigh wave scattering model and the independent scattering approximation, considers single scattering of Rayleigh-to-Rayleigh (R-R) waves. The numerical finite element model is established to accurately simulate the scattering problem and evaluate the theoretical model. Good quantitative agreement is observed between the theoretical model and the finite element results, especially for weakly scattering materials. The agreement decreases with the increase of the anisotropy index, owing to the reduced applicability of the Born approximation. However, the agreement remains generally good when weak multiple scattering is involved. In addition, the R-R backscattering behaviour of 2D Rayleigh waves is similar to the longitudinal-to-longitudinal and transverse-to-transverse backscattering of bulk waves, with the former exhibiting stronger scattering. These findings establish a foundation for using Rayleigh waves in quantitative characterisation of polycrystalline materials.
△ Less
Submitted 6 July, 2023;
originally announced July 2023.
-
Characteristics of the edge temperature ring oscillation during stationary improved confnement mode in EAST
Authors:
A. D. Liu,
X. L. Zou,
X. M. Zhong,
Y. T. Song,
M. K. Han,
Y. M. Duan,
H. Q. Liu,
T. B. Wang,
E. Z. Li,
L. Zhang,
X. Feng,
G. Zhuang,
EAST I-mode working group
Abstract:
I-mode is a natural ELMy-free regime with H-mode like improved energy confnement and L-mode like particle confnement, making it an attractive scenario for future tokamak based fusion reactors. A kind of low frequency oscillation was widely found and appeared to be unique in I-mode, with the frequency between stationary zonal flow and geodesic-acoustic mode (GAM) zonal flow. In EAST, 90 percent I-m…
▽ More
I-mode is a natural ELMy-free regime with H-mode like improved energy confnement and L-mode like particle confnement, making it an attractive scenario for future tokamak based fusion reactors. A kind of low frequency oscillation was widely found and appeared to be unique in I-mode, with the frequency between stationary zonal flow and geodesic-acoustic mode (GAM) zonal flow. In EAST, 90 percent I-mode shots have such mode, called edge temperature ring oscillation (ETRO). The mode probably plays an important role during I-mode development and sustainment, while investigations are needed to clarify the differences between ETRO and the similar mode named as low frequency edge oscillation (LFEO) in AUG and C-Mod, especially whether it is still GAM. In the paper, the ETRO characteristics in EAST were investigated in detail and most do not agree with GAM, including that 1) during L-I transition with edge Te and Ti both increasing, ETRO has a smaller frequency than GAM; 2) ETRO has distinct harmonics in various diagnostics; 3) The magnetic component of ETRO is dominated by m = 1 structure; 4) ETRO is accompanied by turbulence transition between electron-scale and ion-scale; 5) As I-mode approaching to H-mode, ETRO frequency would decrease rapidly with Te increasing. These features imply that ETRO is probably caused by the stationary zonal flow with fnite frequency. Moreover, other damping mechanisms need to be involved besides collision in the Imode edge region. It was found that modest fueling could decrease the ETRO intensity with the I-mode confnement sustaining, suggesting that supersonic molecular beam injection (SMBI) could be used as an effective tool to control ETRO.
△ Less
Submitted 14 June, 2023;
originally announced June 2023.
-
Observing dynamical phases of BCS superconductors in a cavity QED simulator
Authors:
Dylan J. Young,
Anjun Chu,
Eric Yilun Song,
Diego Barberena,
David Wellnitz,
Zhijing Niu,
Vera M. Schäfer,
Robert J. Lewis-Swan,
Ana Maria Rey,
James K. Thompson
Abstract:
In conventional Bardeen-Cooper-Schrieffer (BCS) superconductors, electrons with opposite momenta bind into Cooper pairs due to an attractive interaction mediated by phonons in the material. While superconductivity naturally emerges at thermal equilibrium, it can also emerge out of equilibrium when the system's parameters are abruptly changed. The resulting out-of-equilibrium phases are predicted t…
▽ More
In conventional Bardeen-Cooper-Schrieffer (BCS) superconductors, electrons with opposite momenta bind into Cooper pairs due to an attractive interaction mediated by phonons in the material. While superconductivity naturally emerges at thermal equilibrium, it can also emerge out of equilibrium when the system's parameters are abruptly changed. The resulting out-of-equilibrium phases are predicted to occur in real materials and ultracold fermionic atoms but have not yet all been directly observed. Here we realize an alternate way to generate the proposed dynamical phases using cavity quantum electrodynamics (cavity QED). Our system encodes the presence or absence of a Cooper pair in a long-lived electronic transition in $^{88}$Sr atoms coupled to an optical cavity and represents interactions between electrons as photon-mediated interactions through the cavity. To fully explore the phase diagram, we manipulate the ratio between the single-particle dispersion and the interactions after a quench and perform real-time tracking of subsequent dynamics of the superconducting order parameter using non-destructive measurements. We observe regimes where the order parameter decays to zero (phase I), assumes a non-equilibrium steady-state value (phase II), or exhibits persistent oscillations (phase III). This opens up exciting prospects for quantum simulation, including the potential to engineer unconventional superconductors and to probe beyond mean-field effects like the spectral form factor, and for increasing coherence time for quantum sensing.
△ Less
Submitted 23 February, 2024; v1 submitted 31 May, 2023;
originally announced June 2023.
-
Node Embedding from Neural Hamiltonian Orbits in Graph Neural Networks
Authors:
Qiyu Kang,
Kai Zhao,
Yang Song,
Sijie Wang,
Wee Peng Tay
Abstract:
In the graph node embedding problem, embedding spaces can vary significantly for different data types, leading to the need for different GNN model types. In this paper, we model the embedding update of a node feature as a Hamiltonian orbit over time. Since the Hamiltonian orbits generalize the exponential maps, this approach allows us to learn the underlying manifold of the graph in training, in c…
▽ More
In the graph node embedding problem, embedding spaces can vary significantly for different data types, leading to the need for different GNN model types. In this paper, we model the embedding update of a node feature as a Hamiltonian orbit over time. Since the Hamiltonian orbits generalize the exponential maps, this approach allows us to learn the underlying manifold of the graph in training, in contrast to most of the existing literature that assumes a fixed graph embedding manifold with a closed exponential map solution. Our proposed node embedding strategy can automatically learn, without extensive tuning, the underlying geometry of any given graph dataset even if it has diverse geometries. We test Hamiltonian functions of different forms and verify the performance of our approach on two graph node embedding downstream tasks: node classification and link prediction. Numerical experiments demonstrate that our approach adapts better to different types of graph datasets than popular state-of-the-art graph node embedding GNNs. The code is available at \url{https://github.com/zknus/Hamiltonian-GNN}.
△ Less
Submitted 30 May, 2023;
originally announced May 2023.
-
Evaluation of Coronal and Interplanetary Magnetic Field Extrapolation Using PSP Solar Wind Observation
Authors:
Yuechun Song
Abstract:
Using solar wind observation near PSP perihelions as constraints, we have investigated the parameters in various PFSS model methods. It's found that the interplanetary magnetic field extrapolation with source surface height $R_\mathrm{SS} = 2\,Rs$ is better than that with $R_\mathrm{SS} = 2.5\,Rs$. HMI and GONG magnetograms show similar performance in the simulation of magnetic field variation, bu…
▽ More
Using solar wind observation near PSP perihelions as constraints, we have investigated the parameters in various PFSS model methods. It's found that the interplanetary magnetic field extrapolation with source surface height $R_\mathrm{SS} = 2\,Rs$ is better than that with $R_\mathrm{SS} = 2.5\,Rs$. HMI and GONG magnetograms show similar performance in the simulation of magnetic field variation, but the former appears to have a slight advantage in reconstruction of intensity while the latter is more adaptable to sparser grids. The finite-difference method of constructing eigenvalue problem for potential field can achieve similar accuracy as analytic method and greatly improve the computational efficiency. MHD modeling performs relatively less well in magnetic field prediction, but it is able to provide rich information about solar-terrestrial space.
△ Less
Submitted 20 May, 2023;
originally announced May 2023.
-
Evidence of a hydrated mineral enriched in water and ammonium molecules in the Chang'e-5 lunar sample
Authors:
Shifeng Jin,
Munan Hao,
Zhongnan Guo,
Bohao Yin,
Yuxin Ma,
Lijun Deng,
Xu Chen,
Yanpeng Song,
Cheng Cao,
Congcong Chai,
Yunqi Ma,
Jiangang Guo,
Xiaolong Chen
Abstract:
The presence and distribution of water on the Moon are fundamental to our understanding of the Earth-Moon system. Despite extensive research and remote detection, the origin and chemical form of lunar water (H2O) have remained elusive. In this study, we present the discovery of a hydrated mineral, (NH4)MgCl3*6H2O, in lunar soil samples returned by the Chang'e-5 mission, containing approximately 41…
▽ More
The presence and distribution of water on the Moon are fundamental to our understanding of the Earth-Moon system. Despite extensive research and remote detection, the origin and chemical form of lunar water (H2O) have remained elusive. In this study, we present the discovery of a hydrated mineral, (NH4)MgCl3*6H2O, in lunar soil samples returned by the Chang'e-5 mission, containing approximately 41 wt% H2O. The mineral's structure and composition closely resemble novograblenovite, a terrestrial fumarole mineral formed through the reaction of hot basalt with water-rich volcanic gases, and carnallite, an earth evaporite mineral. We rule out terrestrial contamination or rocket exhaust as the origin of this hydrate, based on its chemical and isotopic compositions and formation conditions. The presence of ammonium indicates a more complex lunar degassing history and highlights its potential as a resource for lunar habitation. Our findings also suggest that water molecules can persist in sunlit areas of the Moon as hydrated salt, providing crucial constraints to the fugacity of water and ammonia vapor in lunar volcanic gases.
△ Less
Submitted 28 June, 2024; v1 submitted 9 May, 2023;
originally announced May 2023.
-
STCF Conceptual Design Report: Volume 1 -- Physics & Detector
Authors:
M. Achasov,
X. C. Ai,
R. Aliberti,
L. P. An,
Q. An,
X. Z. Bai,
Y. Bai,
O. Bakina,
A. Barnyakov,
V. Blinov,
V. Bobrovnikov,
D. Bodrov,
A. Bogomyagkov,
A. Bondar,
I. Boyko,
Z. H. Bu,
F. M. Cai,
H. Cai,
J. J. Cao,
Q. H. Cao,
Z. Cao,
Q. Chang,
K. T. Chao,
D. Y. Chen,
H. Chen
, et al. (413 additional authors not shown)
Abstract:
The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII,…
▽ More
The Super $τ$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τ$-Charm factory -- the BEPCII, providing a unique platform for exploring the asymmetry of matter-antimatter (charge-parity violation), in-depth studies of the internal structure of hadrons and the nature of non-perturbative strong interactions, as well as searching for exotic hadrons and physics beyond the Standard Model. The STCF project in China is under development with an extensive R\&D program. This document presents the physics opportunities at the STCF, describes conceptual designs of the STCF detector system, and discusses future plans for detector R\&D and physics case studies.
△ Less
Submitted 5 October, 2023; v1 submitted 28 March, 2023;
originally announced March 2023.
-
Mid-circuit measurements on a single species neutral alkali atom quantum processor
Authors:
T. M. Graham,
L. Phuttitarn,
R. Chinnarasu,
Y. Song,
C. Poole,
K. Jooya,
J. Scott,
A. Scott,
P. Eichler,
M. Saffman
Abstract:
We demonstrate mid-circuit measurements in a neutral atom array by shelving data qubits in protected hyperfine-Zeeman sub-states while non-destructively measuring an ancilla qubit. Measurement fidelity was enhanced using microwave repumping of the ancilla during the measurement. The coherence of the shelved data qubits was extended during the ancilla readout with dynamical decoupling pulses, after…
▽ More
We demonstrate mid-circuit measurements in a neutral atom array by shelving data qubits in protected hyperfine-Zeeman sub-states while non-destructively measuring an ancilla qubit. Measurement fidelity was enhanced using microwave repumping of the ancilla during the measurement. The coherence of the shelved data qubits was extended during the ancilla readout with dynamical decoupling pulses, after which the data qubits are returned to mf = 0 computational basis states. We demonstrate that the quantum state of the data qubits is well preserved up to a constant phase shift with a state preparation and measurement (SPAM) corrected process fidelity of F = 97.0(5)%. The measurement fidelity on the ancilla qubit after correction for state preparation errors is F = 94.9(8)% and F = 95.3(1.1)% for |0> and |1> qubit states, respectively. We discuss extending this technique to repetitive quantum error correction using quadrupole recooling and microwave-based quantum state resetting.
△ Less
Submitted 9 October, 2023; v1 submitted 17 March, 2023;
originally announced March 2023.
-
A Light Yield Enhancement Method Using Wavelength Shifter for the STCF EMC
Authors:
Zekun Jia,
Hanlin Yu,
Hongkun Mo,
Yong Song,
Zhongtao Shen,
Yunlong Zhang,
Jianbei Liu,
Haiping Peng
Abstract:
Super Tau-Charm Facility (STCF) is a next-generation high luminosity electron-positron collider facility and is currently one of the major options for accelerator-based particle physics experiment in China. The crystal-based electromagnetic calorimeter (EMC) with undoped CsI is a major sub-system of the STCF spectrometer. To fulfill the increasing physics requirements on measurement precision and…
▽ More
Super Tau-Charm Facility (STCF) is a next-generation high luminosity electron-positron collider facility and is currently one of the major options for accelerator-based particle physics experiment in China. The crystal-based electromagnetic calorimeter (EMC) with undoped CsI is a major sub-system of the STCF spectrometer. To fulfill the increasing physics requirements on measurement precision and the suffering of radiation, improving the detected light yield is an important task of STCF EMC R&D. This paper studies a "wavelength shifting in propagation" scheme for STCF EMC using the nanostructured organosilicon luminophore (NOL). The studies are performed by both Monte Carlo simulation and experimental tests. The light yield is proved to be improved by a factor of 1.59 in the experiment. Meanwhile, a study of the NOL's radiation hardness is carried out to verify the reliability of the NOL. No obvious degradation in the performance is observed with the total ionization does up to 100 krad, far beyond the total radiation dose of STCF with ten years of operation.
△ Less
Submitted 27 February, 2023; v1 submitted 19 December, 2022;
originally announced December 2022.
-
Towards Cross Domain Generalization of Hamiltonian Representation via Meta Learning
Authors:
Yeongwoo Song,
Hawoong Jeong
Abstract:
Recent advances in deep learning for physics have focused on discovering shared representations of target systems by incorporating physics priors or inductive biases into neural networks. While effective, these methods are limited to the system domain, where the type of system remains consistent and thus cannot ensure the adaptation to new, or unseen physical systems governed by different laws. Fo…
▽ More
Recent advances in deep learning for physics have focused on discovering shared representations of target systems by incorporating physics priors or inductive biases into neural networks. While effective, these methods are limited to the system domain, where the type of system remains consistent and thus cannot ensure the adaptation to new, or unseen physical systems governed by different laws. For instance, a neural network trained on a mass-spring system cannot guarantee accurate predictions for the behavior of a two-body system or any other system with different physical laws. In this work, we take a significant leap forward by targeting cross domain generalization within the field of Hamiltonian dynamics. We model our system with a graph neural network (GNN) and employ a meta learning algorithm to enable the model to gain experience over a distribution of systems and make it adapt to new physics. Our approach aims to learn a unified Hamiltonian representation that is generalizable across multiple system domains, thereby overcoming the limitations of system-specific models. We demonstrate that the meta-trained model captures the generalized Hamiltonian representation that is consistent across different physical domains. Overall, through the use of meta learning, we offer a framework that achieves cross domain generalization, providing a step towards a unified model for understanding a wide array of dynamical systems via deep learning.
△ Less
Submitted 27 April, 2024; v1 submitted 2 December, 2022;
originally announced December 2022.
-
Collision-induced Hopf-type bifurcation reversible transitions in a dual-wavelength femtosecond fiber laser
Authors:
Runmin Liu,
Defeng Zou,
Shuang Niu,
Youjian Song,
Minglie Hu
Abstract:
Collision refers to a striking nonlinear interaction in dissipative systems, revealing the particle-like properties of solitons. In dual-wavelength mode-locked fiber lasers, collisions are inherent and periodic. However, how collisions influence the dynamical transitions in the dual-wavelength mode-locked state has still not been explored. In our research, dispersion management triggers the comple…
▽ More
Collision refers to a striking nonlinear interaction in dissipative systems, revealing the particle-like properties of solitons. In dual-wavelength mode-locked fiber lasers, collisions are inherent and periodic. However, how collisions influence the dynamical transitions in the dual-wavelength mode-locked state has still not been explored. In our research, dispersion management triggers the complex interactions between solitons in the cavity. We reveal the smooth or reversible Hopf-type bifurcation transitions of dual-color soliton molecules (SMs) during collision by real-time spectral measurement technique of TS-DFT. The reversible transitions from stationary SM to vibrating SM, revealing that cavity parameters pass through a bifurcation point in the collision process without active external intervention. The numerical results confirm the universality of collision-induced bifurcation behavior. These findings provide new insights into collision dynamics in dual-wavelength ultrafast fiber lasers. Furthermore, the study of intermolecular collisions is of great significance for other branches of nonlinear science.
△ Less
Submitted 9 November, 2022;
originally announced November 2022.
-
Chaotic internal dynamics of dissipative optical soliton molecules
Authors:
Youjian Song,
Defeng Zou,
Omri Gat,
Minglie Hu,
Philippe Grelu
Abstract:
When a laser cavity supports the propagation of several ultrashort pulses, these pulses interact and can form compact bound states called soliton molecules. Soliton molecules are fascinating objects of nonlinear science, which present striking analogies with their matter molecules counterparts. The soliton pair, composed of two identical pulses, constitutes the chief soliton molecule of fundamenta…
▽ More
When a laser cavity supports the propagation of several ultrashort pulses, these pulses interact and can form compact bound states called soliton molecules. Soliton molecules are fascinating objects of nonlinear science, which present striking analogies with their matter molecules counterparts. The soliton pair, composed of two identical pulses, constitutes the chief soliton molecule of fundamental interest. The relative timing and phase between the two propagating pulses are the most salient internal degrees of freedom of the soliton molecule. These two internal degrees of freedom allow self-oscillating soliton molecules, which have indeed been repeatedly observed, whereas the lowdimensional chaotic dynamics of a soliton-pair molecule remains elusive, noting that it would require at least three degrees of freedom. We here report the observation of chaotic soliton-pair molecules within an ultrafast fiber laser, by means of a direct measurement of the relative optical pulse separation with sub-femtosecond precision in real time. Moreover, we demonstrate an all-optical control of the chaotic dynamics followed by the soliton molecule, by injecting a modulated optical signal that resynchronizes the internal periodic vibration of soliton molecule.
△ Less
Submitted 5 November, 2022;
originally announced November 2022.
-
$Bρ$-defined isochronous mass spectrometry: a new approach for high-precision mass measurements of short-lived nuclei
Authors:
M. Wang,
M. Zhang,
X. Zhou,
Y. H. Zhang,
Yu. A. Litvinov,
H. S. Xu,
R. J. Chen,
H. Y. Deng,
C. Y. Fu,
W. W. Ge,
H. F. Li,
T. Liao,
S. A. Litvinov,
P. Shuai,
J. Y. Shi,
M. Si,
R. S. Sidhu,
Y. N. Song,
M. Z. Sun,
S. Suzuki,
Q. Wang,
Y. M. Xing,
X. Xu,
T. Yamaguchi,
X. L. Yan
, et al. (4 additional authors not shown)
Abstract:
A novel technique for broadband high-precision mass measurements of short-lived exotic nuclides is reported. It is based on the isochronous mass spectrometry (IMS) and realizes simultaneous determinations of revolution time and velocity of short-lived stored ions at the cooler storage ring CSRe in Lanzhou. The new technique, named as the $Bρ$-defined IMS or $Bρ$-IMS, boosts the efficiency, sensiti…
▽ More
A novel technique for broadband high-precision mass measurements of short-lived exotic nuclides is reported. It is based on the isochronous mass spectrometry (IMS) and realizes simultaneous determinations of revolution time and velocity of short-lived stored ions at the cooler storage ring CSRe in Lanzhou. The new technique, named as the $Bρ$-defined IMS or $Bρ$-IMS, boosts the efficiency, sensitivity, and accuracy of mass measurements, and is applied here to measure masses of neutron-deficient $fp$-shell nuclides. In a single accelerator setting, masses of $^{46}$Cr, $^{50}$Fe and $^{54}$Ni are determined with relative uncertainties of (5~-~6)$\times10^{-8}$, thereby improving the input data for testing the unitarity of the Cabibbo-Kobayashi-Maskawa quark mixing matrix. This is the technique of choice for future high-precision measurements of the most rarely produced shortest-lived nuclides.
△ Less
Submitted 3 November, 2022;
originally announced November 2022.
-
Theoretical and numerical modeling of Rayleigh wave scattering by an elastic inclusion
Authors:
Shan Li,
Ming Huang,
Yongfeng Song,
Bo Lan,
Xiongbing Li
Abstract:
This work presents theoretical and numerical models for the backscattering of two-dimensional Rayleigh waves by an elastic inclusion, with the host material being isotropic and the inclusion having arbitrary shape and crystallographic symmetry. The theoretical model is developed based on the reciprocity theorem using the far-field Green's function and the Born approximation, assuming a small acous…
▽ More
This work presents theoretical and numerical models for the backscattering of two-dimensional Rayleigh waves by an elastic inclusion, with the host material being isotropic and the inclusion having arbitrary shape and crystallographic symmetry. The theoretical model is developed based on the reciprocity theorem using the far-field Green's function and the Born approximation, assuming a small acoustic impedance difference between the host and inclusion materials. The numerical finite element (FE) model is established to deliver relatively accurate simulation of the scattering problem and to evaluate the approximations of the theoretical model. Quantitative agreement is observed between the theoretical model and the FE results for arbitrarily-shaped surface/subsurface inclusions with isotropic/anisotropic properties. The agreement is excellent when the wavelength of the Rayleigh wave is larger than, or comparable to, the size of the inclusion, but it deteriorates as the wavelength gets smaller. Also, the agreement decreases with the anisotropy index for inclusions of anisotropic symmetry. The results lay the foundation for using Rayleigh waves for quantitative characterization of surface/subsurface inclusions, while also demonstrating its limitations.
△ Less
Submitted 24 October, 2022;
originally announced October 2022.
-
Ultra-Wide Bandgap Ga$_2$O$_3$-on-SiC MOSFETs
Authors:
Yiwen Song,
Arkka Bhattacharyya,
Anwarul Karim,
Daniel Shoemaker,
Hsien-Lien Huang,
Saurav Roy,
Craig McGray,
Jacob H. Leach,
Jinwoo Hwang,
Sriram Krishnamoorthy,
Sukwon Choi
Abstract:
Ulta-wide bandgap semiconductors based on $β$-Ga$_2$O$_3$ offer the potential to achieve higher power switching performance, efficiency, and lower manufacturing cost than today's wide bandgap power semiconductors. However, the most critical challenge to the commercialization of Ga$_2$O$_3$ electronics is overheating, which impacts the device's performance and reliability. We fabricated a Ga$_2$O…
▽ More
Ulta-wide bandgap semiconductors based on $β$-Ga$_2$O$_3$ offer the potential to achieve higher power switching performance, efficiency, and lower manufacturing cost than today's wide bandgap power semiconductors. However, the most critical challenge to the commercialization of Ga$_2$O$_3$ electronics is overheating, which impacts the device's performance and reliability. We fabricated a Ga$_2$O$_3$/4H-SiC composite wafer using a fusion-bonding method. A low temperature ($\le$ 600 $^{\circ}$C) epitaxy and device processing approach based on low-temperature (LT) metalorganic vapor phase epitaxy is developed to grow a Ga$_2$O$_3$ epitaxial channel layer on the composite wafer and subsequently fabricate into Ga$_2$O$_3$ power MOSFETs. This LT approach is essential to preserve the structural integrity of the composite wafer. These LT-grown epitaxial Ga$_2$O$_3$ MOSFETs deliver high thermal performance (56% reduction in channel temperature), high voltage blocking capabilities up to 2.45 kV, and power figures of merit of $\sim$ 300 MW/cm$^2$, which is a record high for any heterogeneously integrated Ga$_2$O$_3$ devices reported to date. This work is the first realization of multi-kilovolt homoepitaxial Ga$_2$O$_3$ power MOSFETs fabricated on a composite substrate with high heat transfer performance which delivers state-of-the-art power density values while running much cooler than those on native substrates. Thermal characterization and modeling results reveal that a Ga$_2$O$_3$/diamond composite wafer with a reduced Ga$_2$O$_3$ thickness ($\sim$ 1 $μ$m) and thinner bonding interlayer ($<$ 10 nm) can reduce the device thermal impedance to a level lower than today's GaN-on-SiC power switches.
△ Less
Submitted 21 February, 2023; v1 submitted 13 October, 2022;
originally announced October 2022.
-
Safety Evaluation of Transit Signal Priority with Bus Speed Volatility as a Surrogate Measure: Case Study in Minnesota
Authors:
Yu Song,
Hoki Tse,
Eric M. Lind,
Madhav V. Chitturi,
David A. Noyce
Abstract:
Previous studies have found correlations between the implementation of transit signal priority (TSP) and the reduction in number of crashes. To further understand how TSP affects traffic safety, a more in-depth evaluation was carried out using detailed bus automatic vehicle location (AVL) data. The data was from Minneapolis-Saint Paul Metro Transit Bus Route 5, where TSP was implemented at 30 sign…
▽ More
Previous studies have found correlations between the implementation of transit signal priority (TSP) and the reduction in number of crashes. To further understand how TSP affects traffic safety, a more in-depth evaluation was carried out using detailed bus automatic vehicle location (AVL) data. The data was from Minneapolis-Saint Paul Metro Transit Bus Route 5, where TSP was implemented at 30 signalized intersections in early 2019. A surrogate safety measure, bus speed volatility (BSV), was used to estimate the safety effects of TSP, with a higher BSV indicating more safety risks. A regression analysis was carried out on 23,123 event-level observations, with event defined as a bus traversal of a TSP-equipped intersection. Results indicate that with a TSP request, BSV was significantly lower than without a TSP request, confirming the effectiveness of TSP in smoothing bus trips through intersections, thus reducing risks of bus collisions and passenger fall-overs.
△ Less
Submitted 26 September, 2022;
originally announced September 2022.
-
Multiple Coulomb Scattering of muons in Lithium Hydride
Authors:
M. Bogomilov,
R. Tsenov,
G. Vankova-Kirilova,
Y. P. Song,
J. Y. Tang,
Z. H. Li,
R. Bertoni,
M. Bonesini,
F. Chignoli,
R. Mazza,
V. Palladino,
A. de Bari,
D. Orestano,
L. Tortora,
Y. Kuno,
H. Sakamoto,
A. Sato,
S. Ishimoto,
M. Chung,
C. K. Sung,
F. Filthaut,
M. Fedorov,
D. Jokovic,
D. Maletic,
M. Savic
, et al. (112 additional authors not shown)
Abstract:
Multiple Coulomb Scattering (MCS) is a well known phenomenon occurring when charged particles traverse materials. Measurements of muons traversing low $Z$ materials made in the MuScat experiment showed that theoretical models and simulation codes, such as GEANT4 (v7.0), over-estimated the scattering. The Muon Ionization Cooling Experiment (MICE) measured the cooling of a muon beam traversing a liq…
▽ More
Multiple Coulomb Scattering (MCS) is a well known phenomenon occurring when charged particles traverse materials. Measurements of muons traversing low $Z$ materials made in the MuScat experiment showed that theoretical models and simulation codes, such as GEANT4 (v7.0), over-estimated the scattering. The Muon Ionization Cooling Experiment (MICE) measured the cooling of a muon beam traversing a liquid hydrogen or lithium hydride (LiH) energy absorber as part of a programme to develop muon accelerator facilities, such as a Neutrino Factory or a Muon Collider. The energy loss and MCS that occur in the absorber material are competing effects that alter the performance of the cooling channel. Therefore measurements of MCS are required in order to validate the simulations used to predict the cooling performance in future accelerator facilities. We report measurements made in the MICE apparatus of MCS using a LiH absorber and muons within the momentum range 160 to 245 MeV/c. The measured RMS scattering width is about 9% smaller than that predicted by the approximate formula proposed by the Particle Data Group. Data at 172, 200 and 240 MeV/c are compared to the GEANT4 (v9.6) default scattering model. These measurements show agreement with this more recent GEANT4 (v9.6) version over the range of incident muon momenta.
△ Less
Submitted 21 September, 2022;
originally announced September 2022.
-
Charge Separation in the Photosystem II Reaction Center Resolved by Multispectral Two-Dimensional Electronic Spectroscopy
Authors:
Hoang H. Nguyen,
Yin Song,
Elizabeth L. Maret,
Yogita Silori,
Rhiannon Willow,
Charles F. Yocum,
Jennifer P. Ogilvie
Abstract:
The photosystem II reaction center (PSII-RC) performs the primary energy conversion steps of oxygenic photosynthesis. While the PSII-RC has been studied extensively, the similar timescales of energy transfer and charge separation, and the severely overlapping pigment transitions in the Qy region have led to multiple models of its charge separation mechanism and excitonic structure. Here we combine…
▽ More
The photosystem II reaction center (PSII-RC) performs the primary energy conversion steps of oxygenic photosynthesis. While the PSII-RC has been studied extensively, the similar timescales of energy transfer and charge separation, and the severely overlapping pigment transitions in the Qy region have led to multiple models of its charge separation mechanism and excitonic structure. Here we combine two-dimensional electronic spectroscopy (2DES) with a continuum probe and two-dimensional electronic vibrational spectroscopy (2DEV) to study the cyt b559-D1D2 PSII-RC at 77K. This multispectral combination correlates the overlapping Qy excitons with distinct anion and pigment-specific Qx and mid-IR transitions to resolve the charge separation mechanism and excitonic structure. Through extensive simultaneous analysis of the multispectral 2D data we find that charge separation proceeds on multiple timescales from a highly delocalized excited state via a single pathway in which PheoD1 is the primary electron acceptor, while ChlD1 and PD1 act in concert as the primary electron donor.
△ Less
Submitted 20 September, 2022;
originally announced September 2022.
-
Probabilistic Generative Transformer Language models for Generative Design of Molecules
Authors:
Lai Wei,
Nihang Fu,
Yuqi Song,
Qian Wang,
Jianjun Hu
Abstract:
Self-supervised neural language models have recently found wide applications in generative design of organic molecules and protein sequences as well as representation learning for downstream structure classification and functional prediction. However, most of the existing deep learning models for molecule design usually require a big dataset and have a black-box architecture, which makes it diffic…
▽ More
Self-supervised neural language models have recently found wide applications in generative design of organic molecules and protein sequences as well as representation learning for downstream structure classification and functional prediction. However, most of the existing deep learning models for molecule design usually require a big dataset and have a black-box architecture, which makes it difficult to interpret their design logic. Here we propose Generative Molecular Transformer (GMTransformer), a probabilistic neural network model for generative design of molecules. Our model is built on the blank filling language model originally developed for text processing, which has demonstrated unique advantages in learning the "molecules grammars" with high-quality generation, interpretability, and data efficiency. Benchmarked on the MOSES datasets, our models achieve high novelty and Scaf compared to other baselines. The probabilistic generation steps have the potential in tinkering molecule design due to their capability of recommending how to modify existing molecules with explanation, guided by the learned implicit molecule chemistry. The source code and datasets can be accessed freely at https://github.com/usccolumbia/GMTransformer
△ Less
Submitted 19 September, 2022;
originally announced September 2022.
-
Research on the spectral reconstruction of a low-dimensional filter array micro-spectrometer based on a truncated singular value decomposition-convex optimization algorithm
Authors:
Jiakun Zhang,
Liu Zhang,
Ying Song,
Yan Zheng
Abstract:
Currently, the engineering of miniature spectrometers mainly faces three problems: the mismatch between the number of filters at the front end of the detector and the spectral reconstruction accuracy; the lack of a stable spectral reconstruction algorithm; and the lack of a spectral reconstruction evaluation method suitable for engineering. Therefore, based on 20 sets of filters, this paper classi…
▽ More
Currently, the engineering of miniature spectrometers mainly faces three problems: the mismatch between the number of filters at the front end of the detector and the spectral reconstruction accuracy; the lack of a stable spectral reconstruction algorithm; and the lack of a spectral reconstruction evaluation method suitable for engineering. Therefore, based on 20 sets of filters, this paper classifies and optimizes the filter array by the K-means algorithm and particle swarm algorithm, and obtains the optimal filter combination under different matrix dimensions. Then, the truncated singular value decomposition-convex optimization algorithm is used for high-precision spectral reconstruction, and the detailed spectral reconstruction process of two typical target spectra is described. In terms of spectral evaluation, due to the strong randomness of the target detected during the working process of the spectrometer, the standard value of the target spectrum cannot be obtained. Therefore, for the first time, we adopt the method of joint cross-validation of multiple sets of data for spectral evaluation. The results show that when the random error of positive or negative 2 code values is applied multiple times for reconstruction, the spectral angle cosine value between the reconstructed curves becomes more than 0.995, which proves that the spectral reconstruction under this algorithm has high stability. At the same time, the spectral angle cosine value of the spectral reconstruction curve and the standard curve can reach above 0.99, meaning that it realizes a high-precision spectral reconstruction effect. A high-precision spectral reconstruction algorithm based on truncated singular value-convex optimization, which is suitable for engineering applications, is established in this paper, providing important scientific research value for the engineering application of micro-spectrometers.
△ Less
Submitted 15 September, 2022;
originally announced September 2022.
-
A Multislice computational model for birefringent scattering
Authors:
Shuqi Mu,
Yingtong Shi,
Yintong Song,
Wei Liu,
Wanxue Wei,
Qihuang Gong,
Dashan Dong,
Kebin Shi
Abstract:
Modeling optical field propagation in highly scattering and birefringent medium is of important interest to many photonic research branches. Despite the existence of numerical electromagnetic simulation tools and beam propagation method frameworks, there has been a lack of an analytical model including the full tensor nature of birefringence, which is an essential forward-propagation tool for appl…
▽ More
Modeling optical field propagation in highly scattering and birefringent medium is of important interest to many photonic research branches. Despite the existence of numerical electromagnetic simulation tools and beam propagation method frameworks, there has been a lack of an analytical model including the full tensor nature of birefringence, which is an essential forward-propagation tool for applications requiring efficiently iterative regularization and end-to-end designs. Here, we present an analytical tool for modeling field propagation in a birefringent scattering medium by including a full set of field tensor elements and multiple scattering characteristics. Birefringence-controlled field propagation experiments were successfully carried out to validate the proposed model.
△ Less
Submitted 23 August, 2022;
originally announced August 2022.
-
Synchronization of the internal dynamics of optical soliton molecules
Authors:
Defeng Zou,
Youjian Song,
Omri Gat,
Minglie Hu,
Philippe Grelu
Abstract:
Optical soliton molecules in ultrafast lasers present striking analogies with their matter molecule counterparts, such as internal vibrations. However, the vibrations of soliton molecules are nonlinear, with frequencies that are sensitive to the system parameters, thus presenting an opportunity of control. Here, we experimentally demonstrate the synchronization of the internal vibrations of self-e…
▽ More
Optical soliton molecules in ultrafast lasers present striking analogies with their matter molecule counterparts, such as internal vibrations. However, the vibrations of soliton molecules are nonlinear, with frequencies that are sensitive to the system parameters, thus presenting an opportunity of control. Here, we experimentally demonstrate the synchronization of the internal vibrations of self-excited vibrating soliton molecules through a modulated optical injection. We show efficient sub-harmonic, fundamental and super-harmonic synchronization, forming a pattern of Arnold tongues with respect to the injection strength. Our observations are supported by numerical simulations.
△ Less
Submitted 22 August, 2022;
originally announced August 2022.
-
Physics-Informed Neural Operator for Fast and Scalable Optical Fiber Channel Modelling in Multi-Span Transmission
Authors:
Yuchen Song,
Danshi Wang,
Qirui Fan,
Xiaotian Jiang,
Xiao Luo,
Min Zhang
Abstract:
We propose efficient modelling of optical fiber channel via NLSE-constrained physics-informed neural operator without reference solutions. This method can be easily scalable for distance, sequence length, launch power, and signal formats, and is implemented for ultra-fast simulations of 16-QAM signal transmission with ASE noise.
We propose efficient modelling of optical fiber channel via NLSE-constrained physics-informed neural operator without reference solutions. This method can be easily scalable for distance, sequence length, launch power, and signal formats, and is implemented for ultra-fast simulations of 16-QAM signal transmission with ASE noise.
△ Less
Submitted 11 July, 2022;
originally announced August 2022.
-
Improved accuracy and reproducibility of coronary artery cal-cification features using deconvolution
Authors:
Yingnan Song,
Ammar Hoori,
Hao Wu,
Mani Vembar,
Sadeer Al-Kindi,
Leslie Ciancibello,
James G. Terry,
David R. Jacobs Jr,
John Jeffrey Carr,
David L. Wilson
Abstract:
Our long-range goal is to improve current whole-heart CT calcium score by extracting quantitative features from individual calcifications. We performed deconvolution to improve small calcifications assessment which challenge conventional CT calcium score scanning resolution. We analyzed features of individual calcifications on repeated standard (2.5-mm) and thin (1.25-mm) slice scans from QRM-Card…
▽ More
Our long-range goal is to improve current whole-heart CT calcium score by extracting quantitative features from individual calcifications. We performed deconvolution to improve small calcifications assessment which challenge conventional CT calcium score scanning resolution. We analyzed features of individual calcifications on repeated standard (2.5-mm) and thin (1.25-mm) slice scans from QRM-Cardio phantom, cadaver hearts, and CARDIA study participants. Pre-processing to improve resolution involved of Lucy-Richardson deconvolution with a measured PSF or 3D blind deconvolution where the PSF was iteratively optimized on high detail structures like calcifications in the images. Using QRM with inserts having known mg-calcium, we determined that both blind and conventional deconvolution improved mass measurements nearly equally well on standard images. Further, de-convolved thin images gave excellent recovery of actual mass scores, suggesting that such processing could be our gold standard. For CARDIA images, blind deconvolution greatly improved results on standard slices. Accuracy across 33 calcifications (without, with deconvolution) was (23%,9%), (18%,1%), and (-19%,-1%), for Agatston, volume, and mass scores, respectively. Reproducibility was (0.13,0.10), (0.12,0.08), and (0.11,0.06), respectively. Mass scores were more reproducible than Agatston scores or vol-ume scores. Cadaver volumes showed similar improvements in accuracy/reproducibility and slightly better results with a measured PSF. For many other calcification features in CARDIA data, blind deconvolution improved reproducibility in 21 out of 24 features. Deconvolution improves accuracy and reproducibility of multiple features extracted from individual calcifications in CT calcium score exam. Blind deconvolution improves feature assessments of coronary calcification in archived datasets.
△ Less
Submitted 12 July, 2022;
originally announced July 2022.
-
A simple, passive design for large optical trap arrays for single atoms
Authors:
P. Huft,
Y. Song,
T. M. Graham,
K. Jooya,
S. Deshpande,
C. Fang,
M. Kats,
M. Saffman
Abstract:
We present an approach for trapping cold atoms in a 2D optical trap array generated with a novel 4f filtering scheme and custom transmission mask without any active device. The approach can be used to generate arrays of bright or dark traps, or both simultaneously with a single wavelength for forming two-species traps. We demonstrate the design by creating a 2D array of 1225 dark trap sites, where…
▽ More
We present an approach for trapping cold atoms in a 2D optical trap array generated with a novel 4f filtering scheme and custom transmission mask without any active device. The approach can be used to generate arrays of bright or dark traps, or both simultaneously with a single wavelength for forming two-species traps. We demonstrate the design by creating a 2D array of 1225 dark trap sites, where single Cs atoms are loaded into regions of near-zero intensity in an approximately Gaussian profile trap. Moreover, we demonstrate a simple solution to the problem of out-of-focus trapped atoms, which occurs due to the Talbot effect in periodic optical lattices. Using a high power yet low cost spectrally and spatially broadband laser, out-of-focus interference is mitigated, leading to near perfect removal of Talbot plane traps.
△ Less
Submitted 19 June, 2022; v1 submitted 16 April, 2022;
originally announced April 2022.