-
Roadmap for Animate Matter
Authors:
Giorgio Volpe,
Nuno A. M. Araújo,
Maria Guix,
Mark Miodownik,
Ayusman Sen,
Samuel Sanchez,
Nicolas Martin,
Laura Alvarez,
Juliane Simmchen,
Roberto Di Leonardo,
Nicola Pellicciotta,
Quentin Martinet,
Jérémie Palacci,
Wai Kit Ng,
Dhruv Saxena,
Riccardo Sapienza,
Sara Nadine,
João F. Mano,
Reza Mahdavi,
Caroline Beck Adiels,
Joe Forth,
Christian Santangelo,
Stefano Palagi,
Ji Min Seok,
Victoria A. Webster-Wood
, et al. (17 additional authors not shown)
Abstract:
Humanity has long sought inspiration from nature to innovate materials and devices. As science advances, nature-inspired materials are becoming part of our lives. Animate materials, characterized by their activity, adaptability, and autonomy, emulate properties of living systems. While only biological materials fully embody these principles, artificial versions are advancing rapidly, promising tra…
▽ More
Humanity has long sought inspiration from nature to innovate materials and devices. As science advances, nature-inspired materials are becoming part of our lives. Animate materials, characterized by their activity, adaptability, and autonomy, emulate properties of living systems. While only biological materials fully embody these principles, artificial versions are advancing rapidly, promising transformative impacts across various sectors. This roadmap presents authoritative perspectives on animate materials across different disciplines and scales, highlighting their interdisciplinary nature and potential applications in diverse fields including nanotechnology, robotics and the built environment. It underscores the need for concerted efforts to address shared challenges such as complexity management, scalability, evolvability, interdisciplinary collaboration, and ethical and environmental considerations. The framework defined by classifying materials based on their level of animacy can guide this emerging field encouraging cooperation and responsible development. By unravelling the mysteries of living matter and leveraging its principles, we can design materials and systems that will transform our world in a more sustainable manner.
△ Less
Submitted 15 July, 2024;
originally announced July 2024.
-
A nonlinear room mode determines the operating conditions of a large-cavity synthetic jet actuator at low frequencies
Authors:
L. F. Olivera-Reyes,
E. S. Palacios de Paz,
S. Sánchez,
J. F. Hernández-Sánchez
Abstract:
Synthetic Jet (SJ) actuators are an intrinsically complex combination of electronics, electric and mechanical systems. When studied theoretically, these elements are often simplified to coupled damped harmonic oscillators (DHO) that induce a pressure field within the cavity and drive momentum exchange. Thus, the performance of an SJ actuator results from coupling these DHOs, naturally leading to a…
▽ More
Synthetic Jet (SJ) actuators are an intrinsically complex combination of electronics, electric and mechanical systems. When studied theoretically, these elements are often simplified to coupled damped harmonic oscillators (DHO) that induce a pressure field within the cavity and drive momentum exchange. Thus, the performance of an SJ actuator results from coupling these DHOs, naturally leading to a few resonant modes. There is good evidence in the specialized literature of two resonant modes developing in SJ actuators: the membrane/piezoelectric mode and the Helmholtz resonance. In this work, we report on the effect of a third resonant mode that develops at very low frequencies due to a cavity much larger than the volume displaced by the actuator. We present evidence that the large-cavity dynamics determine the SJ performance in combination with the well-described formation criteria. We compare the intensity of this resonant mode with the first room modes using standard frequency analysis. Unlike typical room modes, the distribution of this resonant mode is very biased to lower frequencies. We also show that the resonant mode may be dimmed and focused by adding an obstacle in different cavity positions for the lower sound intensities. This mode overcomes the Helmholtz resonance, dominating the dynamics for higher sound intensities. We show that jet and vortex velocities mimic the sound pressure curve for the low-frequency range. Its effect mitigates for the higher range due to a delve through smaller stroke lengths, characterized as a fixed relation between the Reynolds and the Stokes numbers. We consider that the large-cavity dynamics is an additional element that, if integrated as design criteria, could extend the optimum frequency response of SJs.
△ Less
Submitted 5 July, 2024;
originally announced July 2024.
-
Ground observations of a space laser for the assessment of its in-orbit performance
Authors:
The Pierre Auger Collaboration,
O. Lux,
I. Krisch,
O. Reitebuch,
D. Huber,
D. Wernham,
T. Parrinello,
:,
A. Abdul Halim,
P. Abreu,
M. Aglietta,
I. Allekotte,
K. Almeida Cheminant,
A. Almela,
R. Aloisio,
J. Alvarez-Muñiz,
J. Ammerman Yebra,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
Anukriti,
L. Apollonio,
C. Aramo,
P. R. Araújo Ferreira
, et al. (358 additional authors not shown)
Abstract:
The wind mission Aeolus of the European Space Agency was a groundbreaking achievement for Earth observation. Between 2018 and 2023, the space-borne lidar instrument ALADIN onboard the Aeolus satellite measured atmospheric wind profiles with global coverage which contributed to improving the accuracy of numerical weather prediction. The precision of the wind observations, however, declined over the…
▽ More
The wind mission Aeolus of the European Space Agency was a groundbreaking achievement for Earth observation. Between 2018 and 2023, the space-borne lidar instrument ALADIN onboard the Aeolus satellite measured atmospheric wind profiles with global coverage which contributed to improving the accuracy of numerical weather prediction. The precision of the wind observations, however, declined over the course of the mission due to a progressive loss of the atmospheric backscatter signal. The analysis of the root cause was supported by the Pierre Auger Observatory in Argentina whose fluorescence detector registered the ultraviolet laser pulses emitted from the instrument in space, thereby offering an estimation of the laser energy at the exit of the instrument for several days in 2019, 2020 and 2021. The reconstruction of the laser beam not only allowed for an independent assessment of the Aeolus performance, but also helped to improve the accuracy in the determination of the laser beam's ground track on single pulse level. The results presented in this paper set a precedent for the monitoring of space lasers by ground-based telescopes and open new possibilities for the calibration of cosmic-ray observatories.
△ Less
Submitted 12 October, 2023;
originally announced October 2023.
-
Physics-driven discovery and bandgap engineering of hybrid perovskites
Authors:
Sheryl L. Sanchez,
Elham Foadian,
Maxim Ziatdinov,
Jonghee Yang,
Sergei V. Kalinin,
Yongtao Liu,
Mahshid Ahmadi
Abstract:
The unique aspect of the hybrid perovskites is their tunability, allowing to engineer the bandgap via substitution. From application viewpoint, this allows creation of the tandem cells between perovskites and silicon, or two or more perovskites, with associated increase of efficiency beyond single-junction Schokley-Queisser limit. However, the concentration dependence of optical bandgap in the hyb…
▽ More
The unique aspect of the hybrid perovskites is their tunability, allowing to engineer the bandgap via substitution. From application viewpoint, this allows creation of the tandem cells between perovskites and silicon, or two or more perovskites, with associated increase of efficiency beyond single-junction Schokley-Queisser limit. However, the concentration dependence of optical bandgap in the hybrid perovskite solid solutions can be non-linear and even non-monotonic, as determined by the band alignments between endmembers, presence of the defect states and Urbach tails, and phase separation. Exploring new compositions brings forth the joint problem of the discovery of the composition with the desired band gap, and establishing the physical model of the band gap concentration dependence. Here we report the development of the experimental workflow based on structured Gaussian Process (sGP) models and custom sGP (c-sGP) that allow the joint discovery of the experimental behavior and the underpinning physical model. This approach is verified with simulated data sets with known ground truth, and was found to accelerate the discovery of experimental behavior and the underlying physical model. The d/c-sGP approach utilizes a few calculated thin film bandgap data points to guide targeted explorations, minimizing the number of thin film preparations. Through iterative exploration, we demonstrate that the c-sGP algorithm that combined 5 bandgap models converges rapidly, revealing a relationship in the bandgap diagram of MA1-xGAxPb(I1-xBrx)3. This approach offers a promising method for efficiently understanding the physical model of band gap concentration dependence in the binary systems, this method can also be extended to ternary or higher dimensional systems.
△ Less
Submitted 10 October, 2023;
originally announced October 2023.
-
Radiation Hardness of MALTA2 Monolithic CMOS Sensors on Czochralski Substrates
Authors:
Milou van Rijnbach,
Dumitru Vlad Berlea,
Valerio Dao,
Martin Gaži,
Phil Allport,
Ignacio Asensi Tortajada,
Prafulla Behera,
Daniela Bortoletto,
Craig Buttar,
Florian Dachs,
Ganapati Dash,
Dominik Dobrijević,
Lucian Fasselt,
Leyre Flores Sanz de Acedo,
Andrea Gabrielli,
Vicente González,
Giuliano Gustavino,
Pranati Jana,
Heinz Pernegger,
Petra Riedler,
Heidi Sandaker,
Carlos Solans Sánchez,
Walter Snoeys,
Tomislav Suligoj,
Marcos Vázquez Núñez
, et al. (4 additional authors not shown)
Abstract:
MALTA2 is the latest full-scale prototype of the MALTA family of Depleted Monolithic Active Pixel Sensors (DMAPS) produced in Tower Semiconductor 180 nm CMOS technology. In order to comply with the requirements of High Energy Physics (HEP) experiments, various process modifications and front-end changes have been implemented to achieve low power consumption, reduce Random Telegraph Signal (RTS) no…
▽ More
MALTA2 is the latest full-scale prototype of the MALTA family of Depleted Monolithic Active Pixel Sensors (DMAPS) produced in Tower Semiconductor 180 nm CMOS technology. In order to comply with the requirements of High Energy Physics (HEP) experiments, various process modifications and front-end changes have been implemented to achieve low power consumption, reduce Random Telegraph Signal (RTS) noise, and optimise the charge collection geometry. Compared to its predecessors, MALTA2 targets the use of a high-resistivity, thick Czochralski (Cz) substrates in order to demonstrate radiation hardness in terms of detection efficiency and timing resolution up to 3E15 1 MeV neq/cm2 with backside metallisation to achieve good propagation of the bias voltage. This manuscript shows the results that were obtained with non-irradiated and irradiated MALTA2 samples on Cz substrates from the CERN SPS test beam campaign from 2021-2023 using the MALTA telescope.
△ Less
Submitted 25 August, 2023;
originally announced August 2023.
-
Development of novel low-mass module concepts based on MALTA monolithic pixel sensors
Authors:
J Weick,
F Dachs,
P Riedler,
M Vicente Barreto Pinto,
A M. Zoubir,
L Flores Sanz de Acedo,
I Asensi Tortajada,
V Dao,
D Dobrijevic,
H Pernegger,
M Van Rijnbach,
A Sharma,
C Solans Sanchez,
R de Oliveira,
D Dannheim,
J V Schmidt
Abstract:
The MALTA CMOS monolithic silicon pixel sensors has been developed in the Tower 180 nm CMOS imaging process. It includes an asynchronous readout scheme and complies with the ATLAS inner tracker requirements for the HL-LHC. Several 4-chip MALTA modules have been built using Al wedge wire bonding to demonstrate the direct transfer of data from chip-to-chip and to read out the data of the entire modu…
▽ More
The MALTA CMOS monolithic silicon pixel sensors has been developed in the Tower 180 nm CMOS imaging process. It includes an asynchronous readout scheme and complies with the ATLAS inner tracker requirements for the HL-LHC. Several 4-chip MALTA modules have been built using Al wedge wire bonding to demonstrate the direct transfer of data from chip-to-chip and to read out the data of the entire module via one chip only. Novel technologies such as Anisotropic Conductive Films (ACF) and nanowires have been investigated to build a compact module. A lightweight flex with 17 μm trace spacing has been designed, allowing compact packaging with a direct attachment of the chip connection pads to the flex using these interconnection technologies. This contribution shows the current state of our work towards a flexible, low material, dense and reliable packaging and modularization of pixel detectors.
△ Less
Submitted 10 March, 2023;
originally announced March 2023.
-
A Platform for Ultra-fast Proton Probing of Matter in Extreme Conditions
Authors:
Luca Volpe,
Alberto Perez,
Teresa Cebriano,
Carlos Sánchez Sánchez,
Sofia Malko,
Alessandro Curcio,
Samia Khetari
Abstract:
Recent development of Ultra short and Intense laser system paved the way for the generation of short and brilliant proton sources that can be used to study plasmas at extreme conditions in the context of High Energy Density physics. Energy selection, focusing and transport of such sources is still a challenge that is not completely solved. here we present a novel and simple design for a isochrone…
▽ More
Recent development of Ultra short and Intense laser system paved the way for the generation of short and brilliant proton sources that can be used to study plasmas at extreme conditions in the context of High Energy Density physics. Energy selection, focusing and transport of such sources is still a challenge that is not completely solved. here we present a novel and simple design for a isochrone magnetic selector capable of angular and energy selection of proton sources by drastically reducing the temporal spread if compared with the state of the art. The isochrone selector is demanded for studying proton stopping power in Warm Dense Matter close to the Bragg peak (proton energy below 1 MeV) where the reduced investigated masses imply a short plasma stagnation time ($<$ 100 ps). The proposed selector can also be used at higher proton energy by pushing the final time spread at the level of few ps with important implications for the study of coherent energy deposition in biology and medical physics. Analytical estimations and Monte Carlo simulations are presented to validate the proposed configurations.
△ Less
Submitted 1 March, 2023;
originally announced March 2023.
-
MALTA-Cz: A radiation hard full-size monolithic CMOS sensor with small electrodes on high-resistivity Czochralski substrate
Authors:
H. Pernegger,
P. Allport,
D. V. Berlea,
A. Birman,
D. Bortoletto,
C. Buttar,
E. Charbon,
F. Dachs,
V. Dao,
H. Denizli,
D. Dobrijevic,
M. Dyndal,
A. Fenigstein,
L. Flores Sanz de Acedo,
P. Freeman,
A. Gabrielli,
M. Gazi,
L. Gonella,
V. Gonzalez,
G. Gustavino,
A. Haim,
T. Kugathasan,
M. LeBlanc,
M. Munker,
K. Y. Oyulmaz
, et al. (14 additional authors not shown)
Abstract:
Depleted Monolithic Active Pixel Sensor (DMAPS) sensors developed in the Tower Semiconductor 180 nm CMOS imaging process have been designed in the context of the ATLAS ITk upgrade Phase-II at the HL-LHC and for future collider experiments. The "MALTA-Czochralski (MALTA-Cz)" full size DMAPS sensor has been developed with the goal to demonstrate a radiation hard, thin CMOS sensor with high granulari…
▽ More
Depleted Monolithic Active Pixel Sensor (DMAPS) sensors developed in the Tower Semiconductor 180 nm CMOS imaging process have been designed in the context of the ATLAS ITk upgrade Phase-II at the HL-LHC and for future collider experiments. The "MALTA-Czochralski (MALTA-Cz)" full size DMAPS sensor has been developed with the goal to demonstrate a radiation hard, thin CMOS sensor with high granularity, high hit-rate capability, fast response time and superior radiation tolerance. The small pixel size ($36.4\times 36.4$~$μ$m$^2$) provides high spatial resolution. Its asynchronous readout architecture is designed for high hit-rates and fast time response in triggered and trigger-less detector applications. The readout architecture is designed to stream all hit data to the multi-channel output which allows an off-sensor trigger formation and the use of hit-time information for event tagging.
The sensor manufacturing has been optimised through process adaptation and special implant designs to allow the manufacturing of small electrode DMAPS on thick high-resistivity p-type Czochralski substrate. The special processing ensures excellent charge collection and charge particle detection efficiency even after a high level of radiation. Furthermore the special implant design and use of a Czochralski substrate improves the sensor's time resolution. This paper presents a summary of sensor design optimisation through process and implant choices and TCAD simulation to model the signal response. Beam and laboratory test results on unirradiated and irradiated sensors have shown excellent detection efficiency after a dose of $2\times10^{15}$ 1 MeV n$_{eq}$/cm$^{2}$. The time resolution of the sensor is measured to be $σ=2$~ns.
△ Less
Submitted 13 September, 2023; v1 submitted 10 January, 2023;
originally announced January 2023.
-
An experimental setup to generate narrowband bi-photons via four-wave mixing in cold atoms
Authors:
N. Arias-Téllez,
I. F. Ángeles-Aguillón,
D. Martínez-Cara,
A. Martínez-Vallejo,
L. Y. Villegas-Aguilar,
L. A. Mendoza-López,
Y. M. Torres,
R. A. Gutiérrez-Arenas,
R. Jáuregui,
I. Pérez Castillo,
A. Cerè,
D. Sahagún Sánchez
Abstract:
We present our recently-built experimental setup designed to generate near-infrared and narrow-band correlated photon pairs by inducing four-wave mixing in a cold gas of $^{87}$Rb atoms confined in a magneto-optical trap. The experimental setup and its automation and control approach are described in detail. A characterization of the optical density of the atomic ensemble as well as the basic stat…
▽ More
We present our recently-built experimental setup designed to generate near-infrared and narrow-band correlated photon pairs by inducing four-wave mixing in a cold gas of $^{87}$Rb atoms confined in a magneto-optical trap. The experimental setup and its automation and control approach are described in detail. A characterization of the optical density of the atomic ensemble as well as the basic statistical measurements of the generated light are reported. The non-classical nature of the photons pairs is confirmed by observing a violation of Cauchy-Schwarz inequality by a factor of 5.6 $\times 10^5$ in a Hanbury Brown - Twiss interferometer. A $1/e$ coherence time for the heralded, idler photons of $4.4 \pm 0.1$ ns is estimated from our observations. We are able to achieve a value of $10^{4}$ s$^{-1}$ pair-detection-rate, which results in a spectral brightness of 280 (MHz s)$^{-1}$. The combination of high brightness and narrow-band spectrum makes this photon-pair source a viable tool in fundamental studies of quantum states and opens the door to use them in quantum technologies.
△ Less
Submitted 23 August, 2021; v1 submitted 19 August, 2021;
originally announced August 2021.
-
Hourly evolution of intra-urban temperature variability across the local climate zones. The case of Madrid
Authors:
Miguel Núñez-Peiró,
Carmen Sanchez-Guevara Sanchez,
F. Javier Neila Gonzalez
Abstract:
Field measurement campaigns have grown exponentially in recent years, stemming from the need for reliable data to validate urban climate models and obtain a better understanding of urban climate features. Also contributing to this growth is the Local Climate Zone (LCZ) scheme, firstly developed to enhance the accuracy in the contextualisation of urban measurements, and lately used for characterisi…
▽ More
Field measurement campaigns have grown exponentially in recent years, stemming from the need for reliable data to validate urban climate models and obtain a better understanding of urban climate features. Also contributing to this growth is the Local Climate Zone (LCZ) scheme, firstly developed to enhance the accuracy in the contextualisation of urban measurements, and lately used for characterising urban areas. Due to its relative novelty, researchers are still investigating the potential of LCZs and its indicators for urban temperature variability detection. In this respect, the present study introduces the results of an extensive monitoring campaign carried out in the city of Madrid over a two-year period (2016-2018). The aim of this work is to further examine the relationships between LCZs and air temperature differences, with emphasis on their hourly and seasonal evolution. A graphical and statistical analysis to identify temperature variability trends for each LCZ is performed. Results support the existing evidence suggesting a high level of effectiveness in capturing the heat island (UHI) profile of different urban areas, while underperforming when it comes to capturing diurnal temperature variability. The incorporation of indicators that explain the daytime temperature variation phenomenon into the LCZ scheme is therefore recommended, warranting further research.
△ Less
Submitted 30 December, 2020;
originally announced January 2021.
-
A global Canopy Water Content product from AVHRR/Metop
Authors:
Francisco Javier García-Haro,
Manuel Campos-Taberner,
Álvaro Moreno,
Håkan Torbern Tagesson,
Fernando Camacho,
Beatriz Martínez,
Sergio Sánchez,
María Piles,
Gustau Camps-Valls,
Marta Yeba,
María Amparo Gilabert
Abstract:
Spatially and temporally explicit canopy water content (CWC) data are important for monitoring vegetation status, and constitute essential information for studying ecosystem-climate interactions. Despite many efforts there is currently no operational CWC product available to users. In the context of the Satellite Application Facility for Land Surface Analysis (LSA-SAF), we have developed an algori…
▽ More
Spatially and temporally explicit canopy water content (CWC) data are important for monitoring vegetation status, and constitute essential information for studying ecosystem-climate interactions. Despite many efforts there is currently no operational CWC product available to users. In the context of the Satellite Application Facility for Land Surface Analysis (LSA-SAF), we have developed an algorithm to produce a global dataset of CWC based on data from the Advanced Very High Resolution Radiometer (AVHRR) sensor on board Meteorological Operational (MetOp) satellites forming the EUMETSAT Polar System (EPS). CWC reflects the water conditions at the leaf level and information related to canopy structure. An accuracy assessment of the EPS/AVHRR CWC indicated a close agreement with multi-temporal ground data from SMAPVEX16 in Canada and Dahra in Senegal. The present study further evaluates the consistency of the LSA-SAF product with respect to the Simplified Level 2 Product Prototype Processor (SL2P) product, and demonstrates its applicability at different spatio-temporal resolutions using optical data from MSI/Sentinel-2 and MODIS/Terra and Aqua. We conclude that the EPS/AVHRR CWC product is a promising tool for monitoring vegetation water status at regional and global scales.
△ Less
Submitted 11 December, 2020;
originally announced December 2020.
-
Nanorods based on mesoporous silica containing iron oxide nanoparticles as catalytic nanomotors: study of motion dynamics
Authors:
Rafael Mestre,
Núria Cadefau,
Ana C. Hortelão,
Jan Grzelak,
Martí Gich,
Anna Roig,
Samuel Sánchez
Abstract:
Self-propelled particles and, in particular, those based on mesoporous silica, have raised considerable interest due to their potential applications in the environmental and biomedical fields thanks to their biocompatibility, tunable surface chemistry and large porosity. Although spherical particles have been widely used to fabricate nano- and micromotors, not much attention has been paid to other…
▽ More
Self-propelled particles and, in particular, those based on mesoporous silica, have raised considerable interest due to their potential applications in the environmental and biomedical fields thanks to their biocompatibility, tunable surface chemistry and large porosity. Although spherical particles have been widely used to fabricate nano- and micromotors, not much attention has been paid to other geometries, such as nanorods. Here, we report the fabrication of self-propelled mesoporous silica nanorods (MSNRs) that move by the catalytic decomposition of hydrogen peroxide by a sputtered Pt layer, Fe2O3 nanoparticles grown within the mesopores, or the synergistic combination of both. We show that motion can occur in two distinct sub-populations characterized by two different motion dynamics, namely enhanced diffusion or directional propulsion, especially when both catalysts are used. These results open up the possibility of using MSNRs as chassis for the fabrication of self-propelled particles for the environmental or biomedical fields.
△ Less
Submitted 5 November, 2020;
originally announced November 2020.
-
Technical Design Report for the PANDA Endcap Disc DIRC
Authors:
Panda Collaboration,
F. Davi,
W. Erni,
B. Krusche,
M. Steinacher,
N. Walford,
H. Liu,
Z. Liu,
B. Liu,
X. Shen,
C. Wang,
J. Zhao,
M. Albrecht,
T. Erlen,
F. Feldbauer,
M. Fink,
V. Freudenreich,
M. Fritsch,
F. H. Heinsius,
T. Held,
T. Holtmann,
I. Keshk,
H. Koch,
B. Kopf,
M. Kuhlmann
, et al. (441 additional authors not shown)
Abstract:
PANDA (anti-Proton ANnihiliation at DArmstadt) is planned to be one of the four main experiments at the future international accelerator complex FAIR (Facility for Antiproton and Ion Research) in Darmstadt, Germany. It is going to address fundamental questions of hadron physics and quantum chromodynamics using cooled antiproton beams with a high intensity and and momenta between 1.5 and 15 GeV/c.…
▽ More
PANDA (anti-Proton ANnihiliation at DArmstadt) is planned to be one of the four main experiments at the future international accelerator complex FAIR (Facility for Antiproton and Ion Research) in Darmstadt, Germany. It is going to address fundamental questions of hadron physics and quantum chromodynamics using cooled antiproton beams with a high intensity and and momenta between 1.5 and 15 GeV/c. PANDA is designed to reach a maximum luminosity of 2x10^32 cm^2 s. Most of the physics programs require an excellent particle identification (PID). The PID of hadronic states at the forward endcap of the target spectrometer will be done by a fast and compact Cherenkov detector that uses the detection of internally reflected Cherenkov light (DIRC) principle. It is designed to cover the polar angle range from 5° to 22° and to provide a separation power for the separation of charged pions and kaons up to 3 standard deviations (s.d.) for particle momenta up to 4 GeV/c in order to cover the important particle phase space. This document describes the technical design and the expected performance of the novel PANDA Disc DIRC detector that has not been used in any other high energy physics experiment (HEP) before. The performance has been studied with Monte-Carlo simulations and various beam tests at DESY and CERN. The final design meets all PANDA requirements and guarantees suffcient safety margins.
△ Less
Submitted 29 December, 2019;
originally announced December 2019.
-
Mini-MALTA: Radiation hard pixel designs for small-electrode monolithic CMOS sensors for the High Luminosity LHC
Authors:
M. Dyndal,
V. Dao,
P. Allport,
I. Asensi Tortajada,
M. Barbero,
S. Bhat,
D. Bortoletto,
I. Berdalovic,
C. Bespin,
C. Buttar,
I. Caicedo,
R. Cardella,
F. Dachs,
Y. Degerli,
H. Denizli,
L. Flores Sanz de Acedo,
P. Freeman,
L. Gonella,
A. Habib,
T. Hemperek,
T. Hirono,
B. Hiti,
T. Kugathasan,
I. Mandić,
D. Maneuski
, et al. (19 additional authors not shown)
Abstract:
Depleted Monolithic Active Pixel Sensor (DMAPS) prototypes developed in the TowerJazz 180 nm CMOS imaging process have been designed in the context of the ATLAS upgrade Phase-II at the HL-LHC. The pixel sensors are characterized by a small collection electrode (3 $μ$m) to minimize capacitance, a small pixel size ($36.4\times 36.4$ $μ$m), and are produced on high resistivity epitaxial p-type silico…
▽ More
Depleted Monolithic Active Pixel Sensor (DMAPS) prototypes developed in the TowerJazz 180 nm CMOS imaging process have been designed in the context of the ATLAS upgrade Phase-II at the HL-LHC. The pixel sensors are characterized by a small collection electrode (3 $μ$m) to minimize capacitance, a small pixel size ($36.4\times 36.4$ $μ$m), and are produced on high resistivity epitaxial p-type silicon. The design targets a radiation hardness of $1\times10^{15}$ 1 MeV n$_{eq}$/cm$^{2}$, compatible with the outermost layer of the ATLAS ITK Pixel detector. This paper presents the results from characterization in particle beam tests of the Mini-MALTA prototype that implements a mask change or an additional implant to address the inefficiencies on the pixel edges. Results show full efficiency after a dose of $1\times10^{15}$ 1 MeV n$_{eq}$/cm$^{2}$.
△ Less
Submitted 14 December, 2019; v1 submitted 26 September, 2019;
originally announced September 2019.
-
Measurement of the relative response of TowerJazz Mini-MALTA CMOS prototypes at Diamond Light Source
Authors:
Maria Mironova,
Kaloyan Metodiev,
Phil Allport,
Ivan Berdalovic,
Daniela Bortoletto,
Craig Buttar,
Roberto Cardella,
Valerio Dao,
Mateusz Dyndal,
Patrick Freeman,
Leyre Flores Sanz de Acedo,
Laura Gonella,
Thanushan Kugathasan,
Heinz Pernegger,
Francesco Piro,
Richard Plackett,
Petra Riedler,
Abhishek Sharma,
Enrico Junior Schioppa,
Ian Shipsey,
Carlos Solans Sanchez,
Walter Snoeys,
Hakan Wennloef,
Daniel Weatherill,
Daniel Wood
, et al. (1 additional authors not shown)
Abstract:
This paper outlines the results of investigations into the effects of radiation damage in the mini-MALTA prototype. Measurements were carried out at Diamond Light Source using a micro-focus X-ray beam, which scanned across the surface of the device in 2 $\mathrm{μm}$ steps. This allowed the in-pixel photon response to be measured directly with high statistics. Three pixel design variations were co…
▽ More
This paper outlines the results of investigations into the effects of radiation damage in the mini-MALTA prototype. Measurements were carried out at Diamond Light Source using a micro-focus X-ray beam, which scanned across the surface of the device in 2 $\mathrm{μm}$ steps. This allowed the in-pixel photon response to be measured directly with high statistics. Three pixel design variations were considered: one with the standard continuous $\mathrm{n^-}$ layer layout and front-end, and extra deep p-well and $\mathrm{n^-}$ gap designs with a modified front-end. Five chips were measured: one unirradiated, one neutron irradiated, and three proton irradiated.
△ Less
Submitted 2 October, 2019; v1 submitted 18 September, 2019;
originally announced September 2019.
-
Crystal orientation and grain size: do they determine optoelectronic properties of MAPbI3 perovskite?
Authors:
Loreta A. Muscarella,
Eline M. Hutter,
Sandy Sanchez,
Christian D. Dieleman,
Tom J. Savenije,
Anders Hagfeldt,
Michael Saliba,
Bruno Ehrler
Abstract:
It is thought that growing large, oriented grains of perovskite can lead to more efficient devices. We study MAPbI3 films fabricated via Flash Infrared Annealing (FIRA) consisting of highly oriented, large grains. Domains observed in the SEM are often misidentified with crystallographic grains, but SEM images don't provide diffraction information. We measure the grain size, crystal structure and g…
▽ More
It is thought that growing large, oriented grains of perovskite can lead to more efficient devices. We study MAPbI3 films fabricated via Flash Infrared Annealing (FIRA) consisting of highly oriented, large grains. Domains observed in the SEM are often misidentified with crystallographic grains, but SEM images don't provide diffraction information. We measure the grain size, crystal structure and grain orientation using Electron Back-Scattered Diffraction (EBSD) and we study how these affect the optoelectronic properties as characterized by local photoluminescence (PL) and time-resolved microwave conductivity measurements (TRMC). We find a spherulitic growth yielding large (tens of micron), highly oriented grains along the (112) and (400) planes in contrast to randomly oriented, smaller (400 nm) grains observed in films fabricated via conventional antisolvent (AS) dripping. We observe a local enhancement and shift of the photoluminescence emission at different regions of the FIRA clusters, but these can be explained with a combination of light-outcoupling and self-absorption. We observe no effect of crystal orientation on the optoelectronic properties. Additionally, despite a substantial difference in grain size between our FIRA sample and a conventional AS sample, we find similar photoluminescence and charge carrier mobilities and lifetime for the two films. These findings show that the optoelectronic quality is not necessarily related to the orientation and size of crystalline domains in perovskite films indicating that fabrication requirements may be more relaxed for perovskites.
△ Less
Submitted 17 July, 2019;
originally announced July 2019.
-
Simulating squirmers with volumetric solvers
Authors:
Stevens Paz Sánchez,
Gustavo C. Buscaglia
Abstract:
Squirmers are models of a class of microswimmers, such as ciliated organisms and phoretic particles, that self-propel in fluids without significant deformation of their body shape. Available techniques for their simulation are based on the boundary-element method and do not contemplate nonlinearities such as those arising from the fluid's inertia or non-Newtonian rheology. This article describes a…
▽ More
Squirmers are models of a class of microswimmers, such as ciliated organisms and phoretic particles, that self-propel in fluids without significant deformation of their body shape. Available techniques for their simulation are based on the boundary-element method and do not contemplate nonlinearities such as those arising from the fluid's inertia or non-Newtonian rheology. This article describes a methodology to simulate squirmers that overcomes these limitations by using volumetric numerical methods, such as finite elements or finite volumes. It deals with interface conditions at the squirmer's surface that generalize those in the published literature. The actual procedures to be performed on a fluid solver to implement the proposed methodology are provided, including the treatment of metachronal surface waves. Among the several numerical examples, a two-dimensional simulation is shown of the hydrodynamic interaction of two individuals of Opalina ranarum.
△ Less
Submitted 18 March, 2019;
originally announced March 2019.
-
Rank-frequency distribution of natural languages: a difference of probabilities approach
Authors:
Germinal Cocho,
R. F. Rodríguez,
Sergio Sánchez,
Jorge Flores,
Carlos Pineda,
Carlos Gershenson
Abstract:
The time variation of the rank $k$ of words for six Indo-European languages is obtained using data from Google Books. For low ranks the distinct languages behave differently, maybe due to syntaxis rules, whereas for $k>50$ the law of large numbers predominates. The dynamics of $k$ is described stochastically through a master equation governing the time evolution of its probability density, which i…
▽ More
The time variation of the rank $k$ of words for six Indo-European languages is obtained using data from Google Books. For low ranks the distinct languages behave differently, maybe due to syntaxis rules, whereas for $k>50$ the law of large numbers predominates. The dynamics of $k$ is described stochastically through a master equation governing the time evolution of its probability density, which is approximated by a Fokker-Planck equation that is solved analytically. The difference between the data and the asymptotic solution is identified with the transient solution, and good agreement is obtained.
△ Less
Submitted 23 November, 2018;
originally announced November 2018.
-
Reduction Signals Method Preserving Spatial and Temporal Capabilities
Authors:
Andrea Gonzalez-Montoro,
Efthymios Lamprou,
Alfonso Perez,
Liczandro Hernandez,
Gabriel Canizares,
Marta Freire,
Luis F. Vidal,
Edwin J. Pincay,
John Barrio,
Sebastian Sanchez,
Filomeno Sanchez,
Jose M. Benlloch,
Antonio J. Gonzalez
Abstract:
In gamma ray imaging, a scintillation crystal is typically used to convert the gamma radiation into visible light. Photosensors are used to transform this light into measurable signals. Several types of photosensors are currently in use depending on the application, most known are Position Sensitive Photomultiplier Tubes (PSPMT) or arrays of Silicon Photomultipliers (SiPMs). There have been invest…
▽ More
In gamma ray imaging, a scintillation crystal is typically used to convert the gamma radiation into visible light. Photosensors are used to transform this light into measurable signals. Several types of photosensors are currently in use depending on the application, most known are Position Sensitive Photomultiplier Tubes (PSPMT) or arrays of Silicon Photomultipliers (SiPMs). There have been investigations towards reducing the number of output signals from those photosensors in order to decrease system costs and complexity without impacting system performance. We propose here two different reduction schemes without degradation of the detector performance, keeping a good spatial, energy and timing resolution, specially well suited for monolithic scintillation crystals based detectors. We have carried out comparative results that will be shown.
△ Less
Submitted 22 June, 2018;
originally announced June 2018.
-
Rank dynamics of word usage at multiple scales
Authors:
José A. Morales,
Ewan Colman,
Sergio Sánchez,
Fernanda Sánchez-Puig,
Carlos Pineda,
Gerardo Iñiguez,
Germinal Cocho,
Jorge Flores,
Carlos Gershenson
Abstract:
The recent dramatic increase in online data availability has allowed researchers to explore human culture with unprecedented detail, such as the growth and diversification of language. In particular, it provides statistical tools to explore whether word use is similar across languages, and if so, whether these generic features appear at different scales of language structure. Here we use the Googl…
▽ More
The recent dramatic increase in online data availability has allowed researchers to explore human culture with unprecedented detail, such as the growth and diversification of language. In particular, it provides statistical tools to explore whether word use is similar across languages, and if so, whether these generic features appear at different scales of language structure. Here we use the Google Books $N$-grams dataset to analyze the temporal evolution of word usage in several languages. We apply measures proposed recently to study rank dynamics, such as the diversity of $N$-grams in a given rank, the probability that an $N$-gram changes rank between successive time intervals, the rank entropy, and the rank complexity. Using different methods, results show that there are generic properties for different languages at different scales, such as a core of words necessary to minimally understand a language. We also propose a null model to explore the relevance of linguistic structure across multiple scales, concluding that $N$-gram statistics cannot be reduced to word statistics. We expect our results to be useful in improving text prediction algorithms, as well as in shedding light on the large-scale features of language use, beyond linguistic and cultural differences across human populations.
△ Less
Submitted 20 February, 2018;
originally announced February 2018.
-
Modeling and predicting the short term evolution of the Geomagnetic field
Authors:
Julien Baerenzung,
Matthias Holschneider,
Johannes Wicht,
Sabrina Sanchez,
Vincent Lesur
Abstract:
The coupled evolution of the magnetic field and the flow at the Earth's core mantle boundary is modeled within the 1900.0-2014.0 time period. To constraint the dynamical behavior of the system with a core field model deriving from direct measurements of the Earth's magnetic field we used an Ensemble Kalman filter algorithm. By simulating an ensemble of possible states, access to the complete stati…
▽ More
The coupled evolution of the magnetic field and the flow at the Earth's core mantle boundary is modeled within the 1900.0-2014.0 time period. To constraint the dynamical behavior of the system with a core field model deriving from direct measurements of the Earth's magnetic field we used an Ensemble Kalman filter algorithm. By simulating an ensemble of possible states, access to the complete statistical properties of the considered fields is available. Furthermore, the method enables to provide predictions and to assess their reliability. In this study, we could highlight the cohabitation of two distinct flow regimes. One associated with the large scale part of the eccentric gyre, which evolves slowly in time and posses a very long memory of its past, and a faster one associated with the small scale velocity field. We show that the latter can exhibit rapid variations in localized areas. The combination of the two regimes can predict quite well the decadal variations in length of day, but it can also explain the discrepancies between the physically predicted and the observed trend in these variations. Hindcast tests demonstrate that the model is well balanced and that it can provide accurate short term predictions of a mean state and its associated uncertainties. However, magnetic field predictions are limited by the high randomization rate of the different velocity field scales, and after approximately 2000 years of forecast, no reliable information on the core field can be recovered.
△ Less
Submitted 17 October, 2017;
originally announced October 2017.
-
Cross-stream migration of active particles
Authors:
Jaideep Katuri,
William E. Uspal,
Juliane Simmchen,
Albert Miguel-López,
Samuel Sánchez
Abstract:
For natural microswimmers, the interplay of swimming activity and external flow can promote robust motion, e.g. propulsion against ("upstream rheotaxis") or perpendicular to the direction of flow. These effects are generally attributed to their complex body shapes and flagellar beat patterns. Here, using catalytic Janus particles as a model experimental system, we report on a strong directional re…
▽ More
For natural microswimmers, the interplay of swimming activity and external flow can promote robust motion, e.g. propulsion against ("upstream rheotaxis") or perpendicular to the direction of flow. These effects are generally attributed to their complex body shapes and flagellar beat patterns. Here, using catalytic Janus particles as a model experimental system, we report on a strong directional response that occurs for spherical active particles in a channel flow. The particles align their propulsion axes to be nearly perpendicular to both the direction of flow and the normal vector of a nearby bounding surface. We develop a deterministic theoretical model of spherical microswimmers near a planar wall that captures the experimental observations. We show how the directional response emerges from the interplay of shear flow and near-surface swimming activity. Finally, adding the effect of thermal noise, we obtain probability distributions for the swimmer orientation that semi-quantitatively agree with the experimental distributions.
△ Less
Submitted 29 January, 2018; v1 submitted 21 June, 2017;
originally announced June 2017.
-
The Astropy Problem
Authors:
Demitri Muna,
Michael Alexander,
Alice Allen,
Richard Ashley,
Daniel Asmus,
Ruyman Azzollini,
Michele Bannister,
Rachael Beaton,
Andrew Benson,
G. Bruce Berriman,
Maciej Bilicki,
Peter Boyce,
Joanna Bridge,
Jan Cami,
Eryn Cangi,
Xian Chen,
Nicholas Christiny,
Christopher Clark,
Michelle Collins,
Johan Comparat,
Neil Cook,
Darren Croton,
Isak Delberth Davids,
Éric Depagne,
John Donor
, et al. (129 additional authors not shown)
Abstract:
The Astropy Project (http://astropy.org) is, in its own words, "a community effort to develop a single core package for Astronomy in Python and foster interoperability between Python astronomy packages." For five years this project has been managed, written, and operated as a grassroots, self-organized, almost entirely volunteer effort while the software is used by the majority of the astronomical…
▽ More
The Astropy Project (http://astropy.org) is, in its own words, "a community effort to develop a single core package for Astronomy in Python and foster interoperability between Python astronomy packages." For five years this project has been managed, written, and operated as a grassroots, self-organized, almost entirely volunteer effort while the software is used by the majority of the astronomical community. Despite this, the project has always been and remains to this day effectively unfunded. Further, contributors receive little or no formal recognition for creating and supporting what is now critical software. This paper explores the problem in detail, outlines possible solutions to correct this, and presents a few suggestions on how to address the sustainability of general purpose astronomical software.
△ Less
Submitted 10 October, 2016;
originally announced October 2016.
-
Feasibility study for the measurement of $πN$ TDAs at PANDA in $\bar{p}p\to J/ψπ^0$
Authors:
PANDA Collaboration,
B. Singh,
W. Erni,
B. Krusche,
M. Steinacher,
N. Walford,
H. Liu,
Z. Liu,
B. Liu,
X. Shen,
C. Wang,
J. Zhao,
M. Albrecht,
T. Erlen,
M. Fink,
F. H. Heinsius,
T. Held,
T. Holtmann,
S. Jasper,
I. Keshk,
H. Koch,
B. Kopf,
M. Kuhlmann,
M. Kümmel,
S. Leiber
, et al. (488 additional authors not shown)
Abstract:
The exclusive charmonium production process in $\bar{p}p$ annihilation with an associated $π^0$ meson $\bar{p}p\to J/ψπ^0$ is studied in the framework of QCD collinear factorization. The feasibility of measuring this reaction through the $J/ψ\to e^+e^-$ decay channel with the PANDA (AntiProton ANnihilation at DArmstadt) experiment is investigated. Simulations on signal reconstruction efficiency as…
▽ More
The exclusive charmonium production process in $\bar{p}p$ annihilation with an associated $π^0$ meson $\bar{p}p\to J/ψπ^0$ is studied in the framework of QCD collinear factorization. The feasibility of measuring this reaction through the $J/ψ\to e^+e^-$ decay channel with the PANDA (AntiProton ANnihilation at DArmstadt) experiment is investigated. Simulations on signal reconstruction efficiency as well as the background rejection from various sources including the $\bar{p}p\toπ^+π^-π^0$ and $\bar{p}p\to J/ψπ^0π^0$ reactions are performed with PandaRoot, the simulation and analysis software framework of the PANDA experiment. It is shown that the measurement can be done at PANDA with significant constraining power under the assumption of an integrated luminosity attainable in four to five months of data taking at the maximum design luminosity.
△ Less
Submitted 7 October, 2016;
originally announced October 2016.
-
Universal temporal features of rankings in competitive sports and games
Authors:
José A. Morales,
Sergio Sánchez,
Jorge Flores,
Carlos Pineda,
Carlos Gershenson,
Germinal Cocho,
Jerónimo Zizumbo,
Gerardo Iñiguez
Abstract:
Many complex phenomena, from the selection of traits in biological systems to hierarchy formation in social and economic entities, show signs of competition and heterogeneous performance in the temporal evolution of their components, which may eventually lead to stratified structures such as the wealth distribution worldwide. However, it is still unclear whether the road to hierarchical complexity…
▽ More
Many complex phenomena, from the selection of traits in biological systems to hierarchy formation in social and economic entities, show signs of competition and heterogeneous performance in the temporal evolution of their components, which may eventually lead to stratified structures such as the wealth distribution worldwide. However, it is still unclear whether the road to hierarchical complexity is determined by the particularities of each phenomena, or if there are universal mechanisms of stratification common to many systems. Human sports and games, with their (varied but simplified) rules of competition and measures of performance, serve as an ideal test bed to look for universal features of hierarchy formation. With this goal in mind, we analyse here the behaviour of players and team rankings over time for several sports and games. Even though, for a given time, the distribution of performance ranks varies across activities, we find statistical regularities in the dynamics of ranks. Specifically the rank diversity, a measure of the number of elements occupying a given rank over a length of time, has the same functional form in sports and games as in languages, another system where competition is determined by the use or disuse of grammatical structures. Our results support the notion that hierarchical phenomena may be driven by the same underlying mechanisms of rank formation, regardless of the nature of their components. Moreover, such regularities can in principle be used to predict lifetimes of rank occupancy, thus increasing our ability to forecast stratification in the presence of competition.
△ Less
Submitted 13 June, 2016;
originally announced June 2016.
-
Is 1+1=2 an empirical proposition?
Authors:
Yafet Sanchez Sanchez
Abstract:
The idea of meaning as use in language is explored in a mathematical and physical context. Two possible scenarios of further analysis are presented: Ordinal arithmetic and String theory.
The idea of meaning as use in language is explored in a mathematical and physical context. Two possible scenarios of further analysis are presented: Ordinal arithmetic and String theory.
△ Less
Submitted 25 January, 2016;
originally announced April 2016.
-
Containment and resolution of hadronic showers at the FCC
Authors:
Tancredi Carli,
Clement Helsens,
Ana Henriques Correia,
Carlos Solans Sánchez
Abstract:
The particles produced at a potential Future Circular Collider with $\sqrt{s}$ = 100 TeV are of unprecented energies. In this document we present the hadronic shower containment and resolution parametrizations based on Geant4 simulations for the Hadronic calorimetry needed for conceptual detector design at this energy. The Geant4 toolkit along with FTFP\_BERT physics list are used in this study. C…
▽ More
The particles produced at a potential Future Circular Collider with $\sqrt{s}$ = 100 TeV are of unprecented energies. In this document we present the hadronic shower containment and resolution parametrizations based on Geant4 simulations for the Hadronic calorimetry needed for conceptual detector design at this energy. The Geant4 toolkit along with FTFP\_BERT physics list are used in this study. Comparisons are made with test-beam data from the ATLAS Tile hadronic calorimeter. These simulations motivate a 12 $λ$ calorimeter in order to contain at 98% level TeV single hadron showers and multi-TeV jets and keep a pion energy resolution constant term of 3%.
△ Less
Submitted 4 May, 2016; v1 submitted 5 April, 2016;
originally announced April 2016.
-
The Grand Aurorae Borealis Seen in Colombia in 1859
Authors:
Freddy Moreno Cárdenas,
Sergio Cristancho Sánchez,
Santiago Vargas Domínguez
Abstract:
On Thursday, September 1, 1859, the British astronomer Richard Carrington, for the first time ever, observes a spectacular gleam of visible light on the surface of the solar disk, the photosphere. The Carrington Event, as it is nowadays known by scientists, occurred because of the high solar activity that had visible consequences on Earth, in particular reports of outstanding aurorae activity that…
▽ More
On Thursday, September 1, 1859, the British astronomer Richard Carrington, for the first time ever, observes a spectacular gleam of visible light on the surface of the solar disk, the photosphere. The Carrington Event, as it is nowadays known by scientists, occurred because of the high solar activity that had visible consequences on Earth, in particular reports of outstanding aurorae activity that amazed thousands of people in the western hemisphere during the dawn of September 2. The geomagnetic storm, generated by the solar-terrestrial event, had such a magnitude that the auroral oval expanded towards the equator, allowing low latitudes, like Panama's 9$^\circ$ N, to catch a sight of the aurorae. An expedition was carried out to review several historical reports and books from the northern cities of Colombia, allowing the identification of a narrative from Montería, Colombia (8$^\circ$ 45' N), that describes phenomena resembling those of an aurorae borealis, such as fire-like lights, blazing and dazzling glares, and the appearance of an immense S-like shape in the sky. The very low latitude of the geomagnetic north pole in 1859, the lowest value in over half a millennia, is proposed to have allowed the observations of auroral events at locations closer to the equator, and supports the historical description found in Colombia. The finding of such chronicle represents one of the most complete descriptions of low-latitude sightings of aurorae caused by the Carrington Event.
△ Less
Submitted 26 August, 2015;
originally announced August 2015.
-
Technical Design Report for the: PANDA Micro Vertex Detector
Authors:
PANDA Collaboration,
W. Erni,
I. Keshelashvili,
B. Krusche,
M. Steinacher,
Y. Heng,
Z. Liu,
H. Liu,
X. Shen,
Q. Wang,
H. Xu,
M. Albrecht,
J. Becker,
K. Eickel,
F. Feldbauer,
M. Fink,
P. Friedel,
F. H. Heinsius,
T. Held,
H. Koch,
B. Kopf,
M. Leyhe,
C. Motzko,
M. Pelizäus,
J. Pychy
, et al. (436 additional authors not shown)
Abstract:
This document illustrates the technical layout and the expected performance of the Micro Vertex Detector (MVD) of the PANDA experiment. The MVD will detect charged particles as close as possible to the interaction zone. Design criteria and the optimisation process as well as the technical solutions chosen are discussed and the results of this process are subjected to extensive Monte Carlo physics…
▽ More
This document illustrates the technical layout and the expected performance of the Micro Vertex Detector (MVD) of the PANDA experiment. The MVD will detect charged particles as close as possible to the interaction zone. Design criteria and the optimisation process as well as the technical solutions chosen are discussed and the results of this process are subjected to extensive Monte Carlo physics studies. The route towards realisation of the detector is outlined.
△ Less
Submitted 10 August, 2012; v1 submitted 27 July, 2012;
originally announced July 2012.
-
Technical Design Report for the: PANDA Straw Tube Tracker
Authors:
PANDA Collaboration,
W. Erni,
I. Keshelashvili,
B. Krusche,
M. Steinacher,
Y. Heng,
Z. Liu,
H. Liu,
X. Shen,
Q. Wang,
H. Xu,
A. Aab,
M. Albrecht,
J. Becker,
A. Csapó,
F. Feldbauer,
M. Fink,
P. Friedel,
F. H. Heinsius,
T. Held,
L. Klask,
H. Koch,
B. Kopf,
S. Leiber,
M. Leyhe
, et al. (451 additional authors not shown)
Abstract:
This document describes the technical layout and the expected performance of the Straw Tube Tracker (STT), the main tracking detector of the PANDA target spectrometer. The STT encloses a Micro-Vertex-Detector (MVD) for the inner tracking and is followed in beam direction by a set of GEM-stations. The tasks of the STT are the measurement of the particle momentum from the reconstructed trajectory an…
▽ More
This document describes the technical layout and the expected performance of the Straw Tube Tracker (STT), the main tracking detector of the PANDA target spectrometer. The STT encloses a Micro-Vertex-Detector (MVD) for the inner tracking and is followed in beam direction by a set of GEM-stations. The tasks of the STT are the measurement of the particle momentum from the reconstructed trajectory and the measurement of the specific energy-loss for a particle identification. Dedicated simulations with full analysis studies of certain proton-antiproton reactions, identified as being benchmark tests for the whole PANDA scientific program, have been performed to test the STT layout and performance. The results are presented, and the time lines to construct the STT are described.
△ Less
Submitted 4 June, 2012; v1 submitted 24 May, 2012;
originally announced May 2012.
-
Technical Design Report for the PANDA Solenoid and Dipole Spectrometer Magnets
Authors:
The PANDA Collaboration,
W. Erni,
I. Keshelashvili,
B. Krusche,
M. Steinacher,
Y. Heng,
Z. Liu,
H. Liu,
X. Shen,
O. Wang,
H. Xu,
J. Becker,
F. Feldbauer,
F. -H. Heinsius,
T. Held,
H. Koch,
B. Kopf,
M. Pelizaeus,
T. Schroeder,
M. Steinke,
U. Wiedner,
J. Zhong,
A. Bianconi,
M. Bragadireanu,
D. Pantea
, et al. (387 additional authors not shown)
Abstract:
This document is the Technical Design Report covering the two large spectrometer magnets of the PANDA detector set-up. It shows the conceptual design of the magnets and their anticipated performance. It precedes the tender and procurement of the magnets and, hence, is subject to possible modifications arising during this process.
This document is the Technical Design Report covering the two large spectrometer magnets of the PANDA detector set-up. It shows the conceptual design of the magnets and their anticipated performance. It precedes the tender and procurement of the magnets and, hence, is subject to possible modifications arising during this process.
△ Less
Submitted 1 July, 2009;
originally announced July 2009.
-
Music and Astronomy
Authors:
J. A. Caballero,
S. Gonzalez Sanchez,
I. Caballero
Abstract:
What do Brian May (the Queen's lead guitarist), William Herschel and the Jupiter Symphony have in common? And a white dwarf, a piano and Lagartija Nick? At first glance, there is no connection between them, nor between Music and Astronomy. However, there are many revealing examples of musical Astronomy and astronomical Music. This four-page proceeding describes the sonorous poster that we showed…
▽ More
What do Brian May (the Queen's lead guitarist), William Herschel and the Jupiter Symphony have in common? And a white dwarf, a piano and Lagartija Nick? At first glance, there is no connection between them, nor between Music and Astronomy. However, there are many revealing examples of musical Astronomy and astronomical Music. This four-page proceeding describes the sonorous poster that we showed during the VIII Scientific Meeting of the Spanish Astronomical Society.
△ Less
Submitted 16 October, 2008; v1 submitted 11 October, 2008;
originally announced October 2008.
-
Technical Design Report for PANDA Electromagnetic Calorimeter (EMC)
Authors:
PANDA Collaboration,
W. Erni,
I. Keshelashvili,
B. Krusche,
M. Steinacher,
Y. Heng,
Z. Liu,
H. Liu,
X. Shen,
O. Wang,
H. Xu,
J. Becker,
F. Feldbauer,
F. -H. Heinsius,
T. Held,
H. Koch,
B. Kopf,
M. Pelizaeus,
T. Schroeder,
M. Steinke,
U. Wiedner,
J. Zhong,
A. Bianconi,
M. Bragadireanu,
D. Pantea
, et al. (387 additional authors not shown)
Abstract:
This document presents the technical layout and the envisaged performance of the Electromagnetic Calorimeter (EMC) for the PANDA target spectrometer. The EMC has been designed to meet the physics goals of the PANDA experiment, which is being developed for the Facility for Antiproton and Ion Research (FAIR) at Darmstadt, Germany. The performance figures are based on extensive prototype tests and…
▽ More
This document presents the technical layout and the envisaged performance of the Electromagnetic Calorimeter (EMC) for the PANDA target spectrometer. The EMC has been designed to meet the physics goals of the PANDA experiment, which is being developed for the Facility for Antiproton and Ion Research (FAIR) at Darmstadt, Germany. The performance figures are based on extensive prototype tests and radiation hardness studies. The document shows that the EMC is ready for construction up to the front-end electronics interface.
△ Less
Submitted 7 October, 2008;
originally announced October 2008.